- 26 9月, 2006 20 次提交
-
-
由 Larry Finger 提交于
The setup for running long periodic work has a bug that leads to netdev watchdog tx timeouts. This change eliminates the timeouts. Signed-off-by: NMichael Buesch <mb@bu3sch.de> Acked-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ulrich Kunitz 提交于
This patch includes a big cleanup of the existing unused LED code, and adds support for controlling the LED. The link LED will blink if the device is not associated. The LED switches between 2 seconds on and 1 second off. If the device is associated the LED is switched on. The link LED also indicates packet TX. I do a little bit more led resetting than the vendor driver, but the device works now as expected for single LED and double LED devices. Signed-off-by: NUlrich Kunitz <kune@deine-taler.de> Signed-off-by: NDaniel Drake <dsd@gentoo.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ulrich Kunitz 提交于
For housekeeping and watchdog tasks a workqueue is created. The central workqueue is not used to prevent crashes creates by bugs. It might be changed, when the housekeeping is stabilized. Signed-off-by: NUlrich Kunitz <kune@deine-taler.de> Signed-off-by: NDaniel Drake <dsd@gentoo.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ulrich Kunitz 提交于
Checking whether a mutex is not locked directly before mutex_lock() is called, doesn't make sense. The whole point of mutex_lock() is to block, if the mutex is locked. Signed-off-by: NUlrich Kunitz <kune@deine-taler.de> Signed-off-by: NDaniel Drake <dsd@gentoo.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ulrich Kunitz 提交于
Caused by the fact that physical control registers appear to have only a width of 16 bit, 32-bit writes are not required. Signed-off-by: NUlrich Kunitz <kune@deine-taler.de> Signed-off-by: NDaniel Drake <dsd@gentoo.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Larry Finger 提交于
An error message is changed to a printk as the original dprintk would be optimized away if debugging were not enabled. If the error is triggered, a more meaningful message is returned. Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Larry Finger 提交于
In bcm43xx-softmac, the bcm43xx_stats struct contains a variable that is no longer used. In addition, two TODO entries related to noise processing in bcm43xx_rx have been completed, and as unused one is removed. Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Larry Finger 提交于
This patch updates the PHY initialization code for bcm43xx-softmac to conform with recent changes in the clean-room specs at http://bcm-specs.sipsolutions.net. Mostly, these changes implement the sequence needed for chips with GPHY revision 8; however, the patch also corrects a typo in one address, and some parts that were missing from the spec when the initial coding was done. Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Jean Tourrilhes 提交于
Signed-off-by: NJean Tourrilhes <jt@hpl.hp.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Larry Finger 提交于
Patch to make bcm43xx-softmac be compatible with the revised SSID length of WE-21. Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Daniel Drake 提交于
Signed-off-by: NDaniel Drake <dsd@gentoo.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Jean Tourrilhes 提交于
Signed-off-by: NJean Tourrilhes <jt@hpl.hp.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Jean Tourrilhes 提交于
Signed-off-by: NJean Tourrilhes <jt@hpl.hp.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Jean Tourrilhes 提交于
Signed-off-by: NJean Tourrilhes <jt@hpl.hp.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Jean Tourrilhes 提交于
Signed-off-by: NJean Tourrilhes <jt@hpl.hp.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Jean Tourrilhes 提交于
Signed-off-by: NJean Tourrilhes <jt@hpl.hp.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Jean Tourrilhes 提交于
Signed-off-by: NJean Tourrilhes <jt@hpl.hp.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Jean Tourrilhes 提交于
Signed-off-by: NJean Tourrilhes <jt@hpl.hp.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Jean Tourrilhes 提交于
Signed-off-by: NJean Tourrilhes <jt@hpl.hp.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Jean Tourrilhes 提交于
Signed-off-by: NJean Tourrilhes <jt@hpl.hp.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 25 9月, 2006 2 次提交
-
-
由 Al Viro 提交于
ql3xxx_probe() does ioremap and stores result in ->mem_map_registers. On failure exit it does iounmap() of the same thing. OTOH, ql3xxx_remove() does iounmap() of ->mmap_virt_base which is (a) never assigned and (b) never used other than in that iounmap() call. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Al Viro 提交于
the driver is still shite, though... Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 23 9月, 2006 9 次提交
-
-
由 Jim Lewis 提交于
Add the ethtool -S (show statistics) feature to the Spidernet ethernet driver. I have tested it extensively and believe it is ready to be applied. Signed-off-by: NJames K Lewis <jklewis@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Ralf Baechle 提交于
Code for the EV96100 evaluation board hasn't compiled since at least November 15, 2003, so it is being deleted as of 2.6.18 due to lack of a user base. Signed-off-by: NRalf Baechle <ralf@linux-mips.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Dale Farnsworth 提交于
No 64-bit PPC_MULTIPLATFORM platforms use the mv643xx_eth driver, so build it only on PPC32. Signed-off-by: NDale Farnsworth <dale@farnsworth.org> Acked-by: NSven Luther <sl@bplan-gmbh.de> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Lennert Buytenhek 提交于
The Cirrus Logic ep93xx is an ARM SoC that includes an ethernet MAC -- this patch adds a driver for that ethernet MAC. Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Henrik Kretzschmar 提交于
Convert the pci_device_ids to PCI_DEVICE() macro. Saves 1.5k in the sourcefile. Signed-off-by: NHenrik Kretzschmar <henne@nachtwindheim.de> Acked-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stphane Witzmann 提交于
Add support for a SoHard PCI ARCnet card. Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Bjorn Helgaas 提交于
Several IR drivers used "for (i = 0; i < 4; i++)" to walk their dev_self[] table. Better to use ARRAY_SIZE(). And fix ali-ircc so it won't run off the end if we find too many adapters. Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andreas Mohr 提交于
Constify largish areas of firmware data in Tigon3 ethernet driver. non-const: lsmod: tg3 101404 0 objdump -x: .rodata 000003e8 .data 00004a0c ls -l: -rw-r--r-- 1 root root 114404 2006-08-19 21:36 drivers/net/tg3.ko const: lsmod: tg3 101404 0 objdump -x: .rodata 000042c8 .data 00000b4c ls -l: -rw-r--r-- 1 root root 114532 2006-08-19 21:06 drivers/net/tg3.ko Signed-off-by: NAndreas Mohr <andi@lisas.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Replace CHECKSUM_HW by CHECKSUM_PARTIAL (for outgoing packets, whose checksum still needs to be completed) and CHECKSUM_COMPLETE (for incoming packets, device supplied full checksum). Patch originally from Herbert Xu, updated by myself for 2.6.18-rc3. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 21 9月, 2006 6 次提交
-
-
由 Jeff Garzik 提交于
The last minute fix submitted by the author fixed a bug, but broke the driver build. Noticed by Al Viro, since I can't build on said platform. Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Jeff Garzik 提交于
inside #if 0'd code, but it bugged me. Really, we should probably just delete the driver. Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Herbert Xu 提交于
This patch converts all users to use the new crypto_comp type and the crypto_has_* functions. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Herbert Xu 提交于
This patch converts all remaining crypto_digest users to use the new crypto_hash interface. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Herbert Xu 提交于
This patch converts all remaining users to use the new block cipher type where applicable. It also changes all simple cipher operations to use the new encrypt_one/decrypt_one interface. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Francois Romieu 提交于
Reported by Matt Bockol <mbockol@carleton.edu> to make its LOM (MSI 965 Neo) work. Signed-off-by: NFrancois Romieu <romieu@fr.zoreil.com>
-
- 20 9月, 2006 1 次提交
-
-
由 Jeff Garzik 提交于
Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 19 9月, 2006 2 次提交
-
-
由 Stephen Rothwell 提交于
On powerpc and ppc, insl_ns and insl are identical as are outsl_ns and outsl, so remove the conditional use of insl_ns and outsl_ns. Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Alan Cox 提交于
We want the pci devices ref counted against hotplug. Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-