- 01 3月, 2011 1 次提交
-
-
由 Arnaldo Carvalho de Melo 提交于
The ec5761ea cset introduced the symfs feature with a bug for loading vmlinux files that ended up causing this failure: [root@emilia v2.6.38-rc5+]# strace -e trace=open perf top --vmlinux ./vmlinux 2>&1 | tail -3 open("/./vmlinux", O_RDONLY) = -1 ENOENT (No such file or directory) ./vmlinux with build id b9266bf40e98dadb5d43a2f3e95d3c5d4aff46dc not found, continuing without symbols The ./vmlinux file can't be used [root@emilia v2.6.38-rc5+]# Remove the extra slash, just like is done in the DSO__ORIG_DSO handling in dso__load() and other parts of the ec5761ea cset. Reported-by: NIngo Molnar <mingo@elte.hu> Cc: David Ahern <daahern@cisco.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 28 2月, 2011 2 次提交
-
-
由 Thomas Renninger 提交于
Currently numcpus is determined in pid_put_sample which is only called on sched_switch/sched_wakeup sample processing. On a machine with a lot cpus I often saw the last cpu missing. Check for (max) numcpus on every event happening and in the beginning. -> fixes the issue for me. Signed-off-by: NThomas Renninger <trenn@suse.de> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: lenb@kernel.org LKML-Reference: <1298842606-55712-6-git-send-email-trenn@suse.de> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Thomas Renninger 提交于
This fix is needed for eye of gnome and firefox svg viewers. Only Inkscape can handle the broken case. Compare with the other svg_legenda_box declarations, looks like a typo slipped in at this place. Signed-off-by: NThomas Renninger <trenn@suse.de> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: lenb@kernel.org LKML-Reference: <1298842606-55712-5-git-send-email-trenn@suse.de> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 25 2月, 2011 1 次提交
-
-
由 Arnaldo Carvalho de Melo 提交于
So that we match the header where we state the number of events with the "Samples" column when using 'perf report -n/--show-nr-samples': [root@emilia ~]# perf record -a sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.111 MB perf.data (~4860 samples) ] [root@emilia ~]# perf report --stdio --show-nr-samples # Events: 11 cycles # # Overhead Samples Command Shared Object Symbol # ........ .......... ........... .................. ............................ # 16.65% 1 sleep [kernel.kallsyms] [k] unmap_vmas 16.10% 1 perf libpthread-2.12.so [.] __pthread_cleanup_push_defer 15.79% 2 perf [kernel.kallsyms] [k] format_decode 12.88% 1 kworker/1:2 [kernel.kallsyms] [k] cache_reap 10.69% 1 swapper [kernel.kallsyms] [k] _raw_spin_lock 7.55% 1 sleep [kernel.kallsyms] [k] prepare_exec_creds 6.00% 1 perf [jbd2] [k] start_this_handle 5.29% 1 perf [kernel.kallsyms] [k] seq_read 4.75% 1 perf [kernel.kallsyms] [k] get_pid_task 4.30% 1 perf [kernel.kallsyms] [k] _raw_spin_unlock_irqrestore # # (For a higher level overview, try: perf report --sort comm,dso) # [root@emilia ~]# Reported-by: NStephane Eranian <eranian@google.com> Reported-by: NCliff Wickman <cpw@sgi.com> Acked-by: NStephane Eranian <eranian@google.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: <stable@kernel.org> LKML-Reference: <new-submission> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> [ cherry-picked it from perf/core, as it has been reported by others as well. ] Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 23 2月, 2011 12 次提交
-
-
git://git.fluff.org/bjdooks/linux由 Linus Torvalds 提交于
* 'for-2639-rc4/i2c-fixes' of git://git.fluff.org/bjdooks/linux: i2c-omap: fixup commit cb527ede whitespace i2c-omap: Double clear of ARDY status in IRQ handler i2c-omap: fix build for !CONFIG_SUSPEND i2c-omap: fix static suspend vs. runtime suspend i2c-stu300: make sure adapter-name is terminated
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6由 Linus Torvalds 提交于
* 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: Revert "USB: Reset USB 3.0 devices on (re)discovery" USB: musb: omap2430: fix kernel panic on reboot sierra: add new ID for Airprime/Sierra USB IP modem USB: serial/usb_wwan, fix tty NULL dereference USB: Reset USB 3.0 devices on (re)discovery USB: Add quirk for Samsung Android phone modem USB: Add Samsung SGH-I500/Android modem ID switch to visor driver USB: add quirks entry for Keytouch QWERTY Panel usb: musb: omap2430: fix kernel panic on reboot usb: musb: fix build breakage
-
由 Ben Dooks 提交于
Fixup the whitespace error noticed in cb527edeSigned-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Richard woodruff 提交于
This errata occurs when the ARDY interrupt generation is enabled. At the begining of every new transaction the ARDY interrupt is cleared. On continuous i2c transactions where after clearing the ARDY bit from I2C_STAT register (clearing the interrupt), the IRQ line is reasserted and the I2C_STAT[ARDY] bit set again on 1. In fact, the ARDY status bit is not cleared at the write access to I2C_STAT[ARDY] and only the IRQ line is deasserted and then reasserted. This is not captured in the usual errata documents. The workaround is to have a double clear of ARDY status in irq handler. Signed-off-by: NRichard woodruff <r-woodruff2@ti.com> Signed-off-by: NKeerthy <j-keerthy@ti.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Balaji T K 提交于
fix the build break when !CONFIG_SUSPEND drivers/i2c/busses/i2c-omap.c:1173: error: lvalue required as unary '&' operand make[3]: *** [drivers/i2c/busses/i2c-omap.o] Error 1 make[2]: *** [drivers/i2c/busses] Error 2 make[1]: *** [drivers/i2c] Error 2 make: *** [drivers] Error 2 Signed-off-by: NBalaji T K <balajitk@ti.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Kevin Hilman 提交于
When runtime PM is enabled, each OMAP i2c device is suspended after each i2c xfer. However, there are two cases when the static suspend methods must be used to ensure the devices are suspended: 1) runtime PM is disabled, either at compile time or dynamically via /sys/devices/.../power/control. 2) an i2c client driver uses i2c during it's suspend callback, thus leaving the i2c driver active (NOTE: runtime suspend transitions are disabled during system suspend, so i2c activity during system suspend will runtime resume the device, but not runtime (re)suspend it.) Since the actual work to suspend the device is handled by the subsytem, call the bus methods to take care of it. NOTE: This takes care of a known suspend problem on OMAP3 where the TWL RTC driver does i2c xfers during its suspend path leaving the i2c driver in an active state (since runtime suspend transistions are disabled.) Signed-off-by: NKevin Hilman <khilman@ti.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Wolfram Sang 提交于
Use strlcpy instead of strncpy. Signed-off-by: NWolfram Sang <w.sang@pengutronix.de> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6由 Linus Torvalds 提交于
* 'urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: pcmcia: re-enable Zoomed Video support cm4000_cs: Fix undefined ops warning pcmcia vs. MECR on pxa25x/sa1111 drivers/char/pcmcia/ipwireless/main.c: Convert release_resource to release_region/release_mem_region
-
由 Linus Torvalds 提交于
Merge branch 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: genirq: Disable the SHIRQ_DEBUG call in request_threaded_irq for now genirq: Prevent access beyond allocated_irqs bitmap
-
由 Linus Torvalds 提交于
Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf: Fix throttle logic perf, x86: P4 PMU: Fix spurious NMI messages
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6由 Linus Torvalds 提交于
* 'fix/asoc' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ASoC: Ensure supplies are maintained for force enabled widgets ASoC: WM8994: Improve playback robustness ASoC: WM8994: Improve robustness in some use cases ASoC: WM8903: Fix mic detection enable logic ASoC: WM8903: Fix mic detection register definitions ASoC: CX20442: fix wrong reg_cache_default content ASoC: Sync initial widget state with hardware
-
由 Romain Francoise 提交于
Building with CONFIG_KERNEL_XZ results in the following: # Untracked files: # (use "git add <file>..." to include in what will be committed) # # arch/x86/boot/compressed/vmlinux.bin.xz So ignore xz-compressed files at the top level like we already do for other compression types. Signed-off-by: NRomain Francoise <romain@orebokech.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 22 2月, 2011 24 次提交
-
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/ecryptfs/ecryptfs-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ecryptfs/ecryptfs-2.6: eCryptfs: Copy up lower inode attrs in getattr ecryptfs: read on a directory should return EISDIR if not supported eCryptfs: Handle NULL nameidata pointers eCryptfs: Revert "dont call lookup_one_len to avoid NULL nameidata"
-
由 Indan Zupancic 提交于
The current code does not follow Intel documentation: It misses some things and does other, undocumented things. This causes wrong backlight values in certain conditions. Instead of adding tricky code handling badly documented and rare corner cases, don't handle combination mode specially at all. This way PCI_LBPC is never touched and weird things shouldn't happen. If combination mode is enabled, then the only downside is that changing the brightness has a greater granularity (the LBPC value), but LBPC is at most 254 and the maximum is in the thousands, so this is no real functional loss. A potential problem with not handling combined mode is that a brightness of max * PCI_LBPC is not bright enough. However, this is very unlikely because from the documentation LBPC seems to act as a scaling factor and doesn't look like it's supposed to be changed after boot. The value at boot should always result in a bright enough screen. IMPORTANT: However, although usually the above is true, it may not be when people ran an older (2.6.37) kernel which messed up the LBPC register, and they are unlucky enough to have a BIOS that saves and restores the LBPC value. Then a good kernel may seem to not work: Max brightness isn't bright enough. If this happens people should boot back into the old kernel, set brightness to the maximum, and then reboot. After that everything should be fine. For more information see the below links. This fixes bugs: http://bugzilla.kernel.org/show_bug.cgi?id=23472 http://bugzilla.kernel.org/show_bug.cgi?id=25072Signed-off-by: NIndan Zupancic <indan@nul.nu> Tested-by: NAlex Riesen <raa.lkml@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Dmitry Torokhov 提交于
We force particular alignment when we generate attribute structures when generation MODULE_VERSION() data and we need to make sure that this alignment is followed when we iterate over these structures, otherwise we may crash on platforms whose natural alignment is not sizeof(void *), such as m68k. Reported-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NDmitry Torokhov <dtor@vmware.com> [ There are more issues here, but the fixes are incredibly ugly - Linus ] Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86: dell-laptop: Toggle the unsupported hardware killswitch thinkpad_acpi: Always report scancodes for hotkeys acer-wmi: Fix capitalisation of GUID platform/x86: ideapad-laptop depends on INPUT platform: x86: acer-wmi: world-writable sysfs threeg file platform: x86: asus_acpi: world-writable procfs files platform: x86: tc1100-wmi: world-writable sysfs wireless and jogdial files platform-drivers: x86: pmic: Use request_irq instead of chained handler platform-drivers: x86: pmic: Use irq_chip buslock mechanism platform-drivers: x86: Convert pmic to new irq_chip functions platform-drivers: x86: pmic: Fix up bogus irq hackery
-
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6由 Linus Torvalds 提交于
* 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6: fixdep: Do not record dependency on the source file itself
-
由 Randy Dunlap 提交于
Add fs/eventfd.c to filesystems docbook. Make typo corrections in fs/eventfd.c. Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Cc: Davide Libenzi <davidel@xmailserver.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Randy Dunlap 提交于
Update the "log_buf_len" description to use [KMG] syntax for the buffer size. Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ahmed S. Darwish 提交于
The '[KMG]' suffix is commonly described after a number of kernel parameter values documentation. Explicitly state its semantics. Signed-off-by: NAhmed S. Darwish <darwish.07@gmail.com> Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ahmed S. Darwish 提交于
Complete the crashkernel= kernel parameter documentation. Signed-off-by: NAhmed S. Darwish <darwish.07@gmail.com> Acked-by: NSimon Horman <horms@verge.net.au> Acked-by: NVivek Goyal <vgoyal@redhat.com> Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: ceph: keep reference to parent inode on ceph_dentry ceph: queue cap_snaps once per realm libceph: fix socket write error handling libceph: fix socket read error handling
-
由 Linus Torvalds 提交于
Merge branch 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung * 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: S5PV210: Fix regulator names ARM: S5PV210: Update max8998_platform_data ARM: SAMSUNG: Drop exporting s3c24xx_ts_set_platdata ARM: S5P: Fix end address in memory resource information for UART devices ARM: S5P64X0: Cleanup map.h file ARM: S5P6442: Cleanup map.h file ARM: S5PC100: Clenaup map.h file ARM: S5PV210: Cleanup map.h file ARM: S5PV310: Cleanup map.h file
-
git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: [CIFS] update cifs version cifs: Fix regression in LANMAN (LM) auth code cifs: fix handling of scopeid in cifs_convert_address
-
由 Linus Torvalds 提交于
* 'fixes' of master.kernel.org:/home/rmk/linux-2.6-arm: ARM: 6745/1: kprobes insn decoding fix ARM: tlb: move noMMU tlb_flush() to asm/tlb.h ARM: tlb: delay page freeing for SMP and ARMv7 CPUs ARM: Keep exit text/data around for SMP_ON_UP ARM: Ensure predictable endian state on signal handler entry ARM: 6740/1: Place correctly notes section in the linker script ARM: 6700/1: SPEAr: Correct SOC config base address for spear320 ARM: 6722/1: SPEAr: sp810: switch to slow mode before reset ARM: 6712/1: SPEAr: replace readl(), writel() with relaxed versions in uncompress.h ARM: 6720/1: SPEAr: Append UL to VMALLOC_END ARM: 6676/1: Correct the cpu_architecture() function for ARMv7 ARM: 6739/1: update .gitignore for boot/compressed ARM: 6743/1: errata: interrupted ICALLUIS may prevent completion of broadcasted operation ARM: 6742/1: pmu: avoid setting IRQ affinity on UP systems ARM: 6741/1: errata: pl310 cache sync operation may be faulty
-
git://git390.marist.edu/pub/scm/linux-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] net: provide architecture specific NET_SKB_PAD [S390] atomic: use inline asm [S390] correct ipl parameter block safe guard [S390] atomic: use ACCESS_ONCE() for atomic_read() [S390] dasd: correct device table
-
由 Steve French 提交于
Update version to 1.71 so we can more easily spot modules with the last two fixes Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Keng-Yu Lin 提交于
It is found on Dell Inspiron 1018 that the firmware reports that the hardware killswitch is not supported. This makes the rfkill key not functional. This patch forces the driver to toggle the firmware rfkill status in the case that the hardware killswitch is indicated as unsupported by the firmware. Signed-off-by: NKeng-Yu Lin <keng-yu.lin@canonical.com> Tested-by: NAlessio Igor Bogani <abogani@texware.it> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Seth Forshee 提交于
Some thinkpad hotkeys report key codes like KEY_FN_F8 when something like KEY_VOLUMEDOWN is desired. Always provide the scan codes in addition to the key codes to assist with debugging these issues. Also send the scan code before the key code to match what other drivers do, as some userspace utilities expect this ordering. Signed-off-by: NSeth Forshee <seth.forshee@canonical.com> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Matthew Garrett 提交于
6AF4F258-B401-42fd-BE91-3D4AC2D7C0D3 needs to be 6AF4F258-B401-42FD-BE91-3D4AC2D7C0D3 to match the hardware alias. Signed-off-by: NMatthew Garrett <mjg@redhat.com> Acked-by: NCarlos Corbacho <carlos@strangeworlds.co.uk> Cc: stable@kernel.org
-
由 Randy Dunlap 提交于
Most platform/x86 drivers that use INPUT_SPARSEKMAP also depend on INPUT, so do the same for ideapad-laptop. This fixes a kconfig warning and subsequent build errors when CONFIG_INPUT is disabled. warning: (ACER_WMI && ASUS_LAPTOP && DELL_WMI && HP_WMI && PANASONIC_LAPTOP && IDEAPAD_LAPTOP && EEEPC_LAPTOP && EEEPC_WMI && MSI_WMI && TOPSTAR_LAPTOP && ACPI_TOSHIBA) selects INPUT_SPARSEKMAP which has unmet direct dependencies (!S390 && INPUT) ERROR: "input_free_device" [drivers/platform/x86/ideapad-laptop.ko] undefined! ERROR: "input_register_device" [drivers/platform/x86/ideapad-laptop.ko] undefined! ERROR: "sparse_keymap_setup" [drivers/platform/x86/ideapad-laptop.ko] undefined! ERROR: "input_allocate_device" [drivers/platform/x86/ideapad-laptop.ko] undefined! ERROR: "input_unregister_device" [drivers/platform/x86/ideapad-laptop.ko] undefined! ERROR: "sparse_keymap_free" [drivers/platform/x86/ideapad-laptop.ko] undefined! ERROR: "sparse_keymap_report_event" [drivers/platform/x86/ideapad-laptop.ko] undefined! Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Matthew Garrett <mjg@redhat.com> Cc: platform-driver-x86@vger.kernel.org Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Vasiliy Kulikov 提交于
Don't allow everybody to write to hardware registers. Signed-off-by: NVasiliy Kulikov <segoon@openwall.com> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Vasiliy Kulikov 提交于
Don't allow everybody to change ACPI settings. The comment says that it is done deliberatelly, however, the comment before disp_proc_write() says that at least one of these setting is experimental. Signed-off-by: NVasiliy Kulikov <segoon@openwall.com> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Vasiliy Kulikov 提交于
Don't allow everybody to change WMI settings. Signed-off-by: NVasiliy Kulikov <segoon@openwall.com> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Thomas Gleixner 提交于
There is no need to install a chained handler for this hardware. This is a plain x86 IOAPIC interrupt which is handled by the core code perfectly fine. There is nothing special about demultiplexing these gpio interrupts which justifies a custom hack. Replace it by a plain old interrupt handler installed with request_irq. That makes the code agnostic about the underlying primary interrupt hardware. The overhead for this is minimal, but it gives us the advantage of accounting, balancing and to detect interrupt storms. gpio interrupts are not really that performance critical. Patch fixups from akpm Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NMatthew Garrett <mjg@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
-