Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 03 12月, 2008 1 次提交
  3. 02 12月, 2008 4 次提交
    • F
      tracing/function-graph-tracer: support for x86-64 · 48d68b20
      由 Frederic Weisbecker 提交于 
      Impact: extend and enable the function graph tracer to 64-bit x86

This patch implements the support for function graph tracer under x86-64.
Both static and dynamic tracing are supported.

This causes some small CPP conditional asm on arch/x86/kernel/ftrace.c I
wanted to use probe_kernel_read/write to make the return address
saving/patching code more generic but it causes tracing recursion.

That would be perhaps useful to implement a notrace version of these
function for other archs ports.

Note that arch/x86/process_64.c is not traced, as in X86-32. I first
thought __switch_to() was responsible of crashes during tracing because I
believed current task were changed inside but that's actually not the
case (actually yes, but not the "current" pointer).

So I will have to investigate to find the functions that harm here, to
enable tracing of the other functions inside (but there is no issue at
this time, while process_64.c stays out of -pg flags).

A little possible race condition is fixed inside this patch too. When the
tracer allocate a return stack dynamically, the current depth is not
initialized before but after. An interrupt could occur at this time and,
after seeing that the return stack is allocated, the tracer could try to
trace it with a random uninitialized depth. It's a prevention, even if I
hadn't problems with it.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tim Bird <tim.bird@am.sony.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      48d68b20
    • L
      function trace: fix a bug of single thread function trace · 66eafebc
      由 Liming Wang 提交于 
      Impact: fix "no output from tracer" bug caused by ftrace_update_pid_func()

When disabling single thread function trace using
"echo -1 > set_ftrace_pid", the normal function trace
has to restore to original function, otherwise the normal
function trace will not work well.

Without this commit, something like below:

	$ ps |grep 850
	  850 root      2556 S    -/bin/sh
	$ echo 850 > /debug/tracing/set_ftrace_pid
	$ echo function > /debug/tracing/current_tracer
	$ echo 1 > /debug/tracing/tracing_enabled
	$ sleep 1
	$ echo 0 > /debug/tracing/tracing_enabled
	$ cat /debug/tracing/trace_pipe |wc -l
	59704
	$ echo -1 > /debug/tracing/set_ftrace_pid
	$ echo 1 > /debug/tracing/tracing_enabled
	$ sleep 1
	$ echo 0 > /debug/tracing/tracing_enabled
	$ more /debug/tracing/trace_pipe
		<====== nothing output now!
			it should output trace record.
Signed-off-by: NLiming Wang <liming.wang@windriver.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      66eafebc
    • A
      taint: add missing comment · a8005992
      由 Arjan van de Ven 提交于 
      The description for 'D' was missing in the comment...  (causing me a
minute of WTF followed by looking at more of the code)
Signed-off-by: NArjan van de Ven <arjan@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      a8005992
    • D
      epoll: introduce resource usage limits · 7ef9964e
      由 Davide Libenzi 提交于 
      It has been thought that the per-user file descriptors limit would also
limit the resources that a normal user can request via the epoll
interface.  Vegard Nossum reported a very simple program (a modified
version attached) that can make a normal user to request a pretty large
amount of kernel memory, well within the its maximum number of fds.  To
solve such problem, default limits are now imposed, and /proc based
configuration has been introduced.  A new directory has been created,
named /proc/sys/fs/epoll/ and inside there, there are two configuration
points:

  max_user_instances = Maximum number of devices - per user

  max_user_watches   = Maximum number of "watched" fds - per user

The current default for "max_user_watches" limits the memory used by epoll
to store "watches", to 1/32 of the amount of the low RAM.  As example, a
256MB 32bit machine, will have "max_user_watches" set to roughly 90000.
That should be enough to not break existing heavy epoll users.  The
default value for "max_user_instances" is set to 128, that should be
enough too.

This also changes the userspace, because a new error code can now come out
from EPOLL_CTL_ADD (-ENOSPC).  The EMFILE from epoll_create() was already
listed, so that should be ok.

[akpm@linux-foundation.org: use get_current_user()]
Signed-off-by: NDavide Libenzi <davidel@xmailserver.org>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: <stable@kernel.org>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Reported-by: NVegard Nossum <vegardno@ifi.uio.no>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      7ef9964e
  5. 01 12月, 2008 2 次提交
  7. 30 11月, 2008 2 次提交
    • I
      sched: prevent divide by zero error in cpu_avg_load_per_task, update · af6d596f
      由 Ingo Molnar 提交于 
      Regarding the bug addressed in:

  4cd42620: sched: prevent divide by zero error in cpu_avg_load_per_task

Linus points out that the fix is not complete:

> There's nothing that keeps gcc from deciding not to reload
> rq->nr_running.
>
> Of course, in _practice_, I don't think gcc ever will (if it decides
> that it will spill, gcc is likely going to decide that it will
> literally spill the local variable to the stack rather than decide to
> reload off the pointer), but it's a valid compiler optimization, and
> it even has a name (rematerialization).
>
> So I suspect that your patch does fix the bug, but it still leaves the
> fairly unlikely _potential_ for it to re-appear at some point.
>
> We have ACCESS_ONCE() as a macro to guarantee that the compiler
> doesn't rematerialize a pointer access. That also would clarify
> the fact that we access something unsafe outside a lock.

So make sure our nr_running value is immutable and cannot change
after we check it for nonzero.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      af6d596f
    • I
      sched, cpusets: fix warning in kernel/cpuset.c · 1583715d
      由 Ingo Molnar 提交于 
      this warning:

  kernel/cpuset.c: In function ‘generate_sched_domains’:
  kernel/cpuset.c:588: warning: ‘ndoms’ may be used uninitialized in this function

triggers because GCC does not recognize that ndoms stays uninitialized
only if doms is NULL - but that flow is covered at the end of
generate_sched_domains().

Help out GCC by initializing this variable to 0. (that's prudent anyway)

Also, this function needs a splitup and code flow simplification:
with 160 lines length it's clearly too long.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      1583715d
  9. 29 11月, 2008 1 次提交
  11. 28 11月, 2008 4 次提交
    • L
      ftrace: improve seq_operation of ftrace · 50cdaf08
      由 Liming Wang 提交于 
      Impact: make ftrace position computing more sane

First remove useless ->pos field. Then we needn't check seq_printf
in .show like other place.
Signed-off-by: NLiming Wang <liming.wang@windriver.com>
Reviewed-by: NBruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      50cdaf08
    • T
      tracing, alpha: fix build: add missing #ifdef CONFIG_STACKTRACE · c7425acb
      由 Török Edwin 提交于 
      There are architectures that still have no stacktrace support.
Signed-off-by: NTörök Edwin <edwintorok@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      c7425acb
    • I
      tracing/function-graph-tracer: more output tweaks · d51090b3
      由 Ingo Molnar 提交于 
      Impact: prettify the output some more

Before:

0)           |     sys_read() {
0)      0.796 us |   fget_light();
0)           |       vfs_read() {
0)           |         rw_verify_area() {
0)           |           security_file_permission() {
------------8<---------- thread sshd-1755 ------------8<----------

After:

 0)               |  sys_read() {
 0)      0.796 us |    fget_light();
 0)               |    vfs_read() {
 0)               |      rw_verify_area() {
 0)               |        security_file_permission() {
 ------------------------------------------
 | 1)  migration/0--1  =>  sshd-1755
 ------------------------------------------
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      d51090b3
    • F
      tracing/function-graph-tracer: adjustments of the trace informations · 1a056155
      由 Frederic Weisbecker 提交于 
      Impact: increase the visual qualities of the call-graph-tracer output

This patch applies various trace output formatting changes:

 - CPU is now a decimal number, followed by a parenthesis.

 - Overhead is now on the second column (gives a good visibility)

 - Cost is now on the third column, can't exceed 9999.99 us. It is
   followed by a virtual line based on a "|" character.

 - Functions calls are now the last column on the right. This way, we
   haven't dynamic column (which flow is harder to follow) on its right.

 - CPU and Overhead have their own option flag. They are default-on but you
   can disable them easily:

      echo nofuncgraph-cpu > trace_options
      echo nofuncgraph-overhead > trace_options

TODO:

_ Refactoring of the thread switch output.
_ Give a default-off option to output the thread and its pid on each row.
_ Provide headers
_ ....

Here is an example of the new trace style:

0)           |             mutex_unlock() {
0)      0.639 us |           __mutex_unlock_slowpath();
0)      1.607 us |         }
0)           |             remove_wait_queue() {
0)      0.616 us |           _spin_lock_irqsave();
0)      0.616 us |           _spin_unlock_irqrestore();
0)      2.779 us |         }
0)      0.495 us |         n_tty_set_room();
0) ! 9999.999 us |       }
0)           |           tty_ldisc_deref() {
0)      0.615 us |         _spin_lock_irqsave();
0)      0.616 us |         _spin_unlock_irqrestore();
0)      2.793 us |       }
0)           |           current_fs_time() {
0)      0.488 us |         current_kernel_time();
0)      0.495 us |         timespec_trunc();
0)      2.486 us |       }
0) ! 9999.999 us |     }
0) ! 9999.999 us |   }
0) ! 9999.999 us | }
0)           |     sys_read() {
0)      0.796 us |   fget_light();
0)           |       vfs_read() {
0)           |         rw_verify_area() {
0)           |           security_file_permission() {
0)      0.488 us |         cap_file_permission();
0)      1.720 us |       }
0)      3.  4 us |     }
0)           |         tty_read() {
0)      0.488 us |       tty_paranoia_check();
0)           |           tty_ldisc_ref_wait() {
0)           |             tty_ldisc_try() {
0)      0.615 us |           _spin_lock_irqsave();
0)      0.615 us |           _spin_unlock_irqrestore();
0)      5.436 us |         }
0)      6.427 us |       }
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      1a056155
  13. 27 11月, 2008 3 次提交
    • F
      tracing/function-graph-tracer: enhancements for the trace output · 83a8df61
      由 Frederic Weisbecker 提交于 
      Impact: enhance the output of the graph-tracer

This patch applies some ideas of Ingo Molnar and Steven Rostedt.

* Output leaf functions in one line with parenthesis, semicolon and duration
  output.

* Add a second column (after cpu) for an overhead sign.
  if duration > 100 us, "!"
  if duration > 10 us, "+"
  else " "

* Print output in us with remaining nanosec: u.n

* Print duration on the right end, following the indentation of the functions.
  Use also visual clues: "-" on entry call (no duration to output) and "+" on
  return (duration output).

The name of the tracer has been fixed as well: function-branch becomes
function_branch.

Here is an example of the new output:

CPU[000]           dequeue_entity() {                    -
CPU[000]             update_curr() {                    -
CPU[000]               update_min_vruntime();                    + 0.512 us
CPU[000]             }                                + 1.504 us
CPU[000]             clear_buddies();                    + 0.481 us
CPU[000]             update_min_vruntime();                    + 0.504 us
CPU[000]           }                                + 4.557 us
CPU[000]           hrtick_update() {                    -
CPU[000]             hrtick_start_fair();                    + 0.489 us
CPU[000]           }                                + 1.443 us
CPU[000] +       }                                + 14.655 us
CPU[000] +     }                                + 15.678 us
CPU[000] +   }                                + 16.686 us
CPU[000]     msecs_to_jiffies();                    + 0.481 us
CPU[000]     put_prev_task_fair();                    + 0.504 us
CPU[000]     pick_next_task_fair();                    + 0.482 us
CPU[000]     pick_next_task_rt();                    + 0.504 us
CPU[000]     pick_next_task_fair();                    + 0.481 us
CPU[000]     pick_next_task_idle();                    + 0.489 us
CPU[000]     _spin_trylock();                    + 0.655 us
CPU[000]     _spin_unlock();                    + 0.609 us

CPU[000]  ------------8<---------- thread bash-2794 ------------8<----------

CPU[000]               finish_task_switch() {                    -
CPU[000]                 _spin_unlock_irq();                    + 0.722 us
CPU[000]               }                                + 2.369 us
CPU[000] !           }                                + 501972.605 us
CPU[000] !         }                                + 501973.763 us
CPU[000]           copy_from_read_buf() {                    -
CPU[000]             _spin_lock_irqsave();                    + 0.670 us
CPU[000]             _spin_unlock_irqrestore();                    + 0.699 us
CPU[000]             copy_to_user() {                    -
CPU[000]               might_fault() {                    -
CPU[000]                 __might_sleep();                    + 0.503 us
CPU[000]               }                                + 1.632 us
CPU[000]               __copy_to_user_ll();                    + 0.542 us
CPU[000]             }                                + 3.858 us
CPU[000]             tty_audit_add_data() {                    -
CPU[000]               _spin_lock_irq();                    + 0.609 us
CPU[000]               _spin_unlock_irq();                    + 0.624 us
CPU[000]             }                                + 3.196 us
CPU[000]             _spin_lock_irqsave();                    + 0.624 us
CPU[000]             _spin_unlock_irqrestore();                    + 0.625 us
CPU[000] +         }                                + 13.611 us
CPU[000]           copy_from_read_buf() {                    -
CPU[000]             _spin_lock_irqsave();                    + 0.624 us
CPU[000]             _spin_unlock_irqrestore();                    + 0.616 us
CPU[000]           }                                + 2.820 us
CPU[000]
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      83a8df61
    • S
      sched: prevent divide by zero error in cpu_avg_load_per_task · 4cd42620
      由 Steven Rostedt 提交于 
      Impact: fix divide by zero crash in scheduler rebalance irq

While testing the branch profiler, I hit this crash:

divide error: 0000 [#1] PREEMPT SMP
[...]
RIP: 0010:[<ffffffff8024a008>]  [<ffffffff8024a008>] cpu_avg_load_per_task+0x50/0x7f
[...]
Call Trace:
 <IRQ> <0> [<ffffffff8024fd43>] find_busiest_group+0x3e5/0xcaa
 [<ffffffff8025da75>] rebalance_domains+0x2da/0xa21
 [<ffffffff80478769>] ? find_next_bit+0x1b2/0x1e6
 [<ffffffff8025e2ce>] run_rebalance_domains+0x112/0x19f
 [<ffffffff8026d7c2>] __do_softirq+0xa8/0x232
 [<ffffffff8020ea7c>] call_softirq+0x1c/0x3e
 [<ffffffff8021047a>] do_softirq+0x94/0x1cd
 [<ffffffff8026d5eb>] irq_exit+0x6b/0x10e
 [<ffffffff8022e6ec>] smp_apic_timer_interrupt+0xd3/0xff
 [<ffffffff8020e4b3>] apic_timer_interrupt+0x13/0x20

The code for cpu_avg_load_per_task has:

	if (rq->nr_running)
		rq->avg_load_per_task = rq->load.weight / rq->nr_running;

The runqueue lock is not held here, and there is nothing that prevents
the rq->nr_running from going to zero after it passes the if condition.

The branch profiler simply made the race window bigger.

This patch saves off the rq->nr_running to a local variable and uses that
for both the condition and the division.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Peter Zijlstra <peterz@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      4cd42620
    • L
      ftrace: prevent recursion · 4f5a7f40
      由 Lai Jiangshan 提交于 
      Impact: prevent unnecessary stack recursion

if the resched flag was set before we entered, then don't reschedule.
Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      4f5a7f40
  15. 26 11月, 2008 10 次提交
    • A
      tracing: add "power-tracer": C/P state tracer to help power optimization · f3f47a67
      由 Arjan van de Ven 提交于 
      Impact: new "power-tracer" ftrace plugin

This patch adds a C/P-state ftrace plugin that will generate
detailed statistics about the C/P-states that are being used,
so that we can look at detailed decisions that the C/P-state
code is making, rather than the too high level "average"
that we have today.

An example way of using this is:

 mount -t debugfs none /sys/kernel/debug
 echo cstate > /sys/kernel/debug/tracing/current_tracer
 echo 1 > /sys/kernel/debug/tracing/tracing_enabled
 sleep 1
 echo 0 > /sys/kernel/debug/tracing/tracing_enabled
 cat /sys/kernel/debug/tracing/trace | perl scripts/trace/cstate.pl > out.svg
Signed-off-by: NArjan van de Ven <arjan@linux.intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      f3f47a67
    • S
      ftrace: add cpu annotation for function graph tracer · 437f24fb
      由 Steven Rostedt 提交于 
      Impact: enhancement for function graph tracer

When run on a SMP box, the function graph tracer is confusing because
it shows the different CPUS as changes in the trace.

This patch adds the annotation of 'CPU[###]' where ### is a three digit
number. The output will look similar to this:

CPU[001]     dput() {
CPU[000] } 726
CPU[001]     } 487
CPU[000] do_softirq() {
CPU[001]   } 2221
CPU[000]   __do_softirq() {
CPU[000]     __local_bh_disable() {
CPU[001]   unroll_tree_refs() {
CPU[000]     } 569
CPU[001]   } 501
CPU[000]     rcu_process_callbacks() {
CPU[001]   kfree() {

What makes this nice is that now you can grep the file and produce
readable format for a particular CPU.

 # cat /debug/tracing/trace > /tmp/trace
 # grep '^CPU\[000\]' /tmp/trace > /tmp/trace0
 # grep '^CPU\[001\]' /tmp/trace > /tmp/trace1

Will give you:

 # head /tmp/trace0
CPU[000] ------------8<---------- thread sshd-3899 ------------8<----------
CPU[000]     inotify_dentry_parent_queue_event() {
CPU[000]     } 2531
CPU[000]     inotify_inode_queue_event() {
CPU[000]     } 505
CPU[000]   } 69626
CPU[000] } 73089
CPU[000] audit_syscall_exit() {
CPU[000]   path_put() {
CPU[000]     dput() {

 # head /tmp/trace1
CPU[001] ------------8<---------- thread pcscd-3446 ------------8<----------
CPU[001]               } 4186
CPU[001]               dput() {
CPU[001]               } 543
CPU[001]               vfs_permission() {
CPU[001]                 inode_permission() {
CPU[001]                   shmem_permission() {
CPU[001]                     generic_permission() {
CPU[001]                     } 501
CPU[001]                   } 2205
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      437f24fb
    • S
      ftrace: add thread comm to function graph tracer · 660c7f9b
      由 Steven Rostedt 提交于 
      Impact: enhancement to function graph tracer

Export the trace_find_cmdline so the function graph tracer can
use it to print the comms of the threads.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      660c7f9b
    • S
      ftrace: let function tracing and function return run together · e53a6319
      由 Steven Rostedt 提交于 
      Impact: feature

This patch enables function tracing and function return to run together.
I've tested this by enabling the stack tracer and return tracer, where
both the function entry and function return are used together with
dynamic ftrace.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      e53a6319
    • S
      ftrace: use code patching for ftrace graph tracer · 5a45cfe1
      由 Steven Rostedt 提交于 
      Impact: more efficient code for ftrace graph tracer

This patch uses the dynamic patching, when available, to patch
the function graph code into the kernel.

This patch will ease the way for letting both function tracing
and function graph tracing run together.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      5a45cfe1
    • S
      ftrace: add function tracing to single thread · df4fc315
      由 Steven Rostedt 提交于 
      Impact: feature to function trace a single thread

This patch adds the ability to function trace a single thread.
The file:

  /debugfs/tracing/set_ftrace_pid

contains the pid to trace. Valid pids are any positive integer.
Writing any negative number to this file will disable the pid
tracing and the function tracer will go back to tracing all of
threads.

This feature works with both static and dynamic function tracing.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      df4fc315
    • F
      tracing/function-return-tracer: set a more human readable output · 287b6e68
      由 Frederic Weisbecker 提交于 
      Impact: feature

This patch sets a C-like output for the function graph tracing.
For this aim, we now call two handler for each function: one on the entry
and one other on return. This way we can draw a well-ordered call stack.

The pid of the previous trace is loosely stored to be compared against
the one of the current trace to see if there were a context switch.

Without this little feature, the call tree would seem broken at
some locations.
We could use the sched_tracer to capture these sched_events but this
way of processing is much more simpler.

2 spaces have been chosen for indentation to fit the screen while deep
calls. The time of execution in nanosecs is printed just after closed
braces, it seems more easy this way to find the corresponding function.
If the time was printed as a first column, it would be not so easy to
find the corresponding function if it is called on a deep depth.

I plan to output the return value but on 32 bits CPU, the return value
can be 32 or 64, and its difficult to guess on which case we are.
I don't know what would be the better solution on X86-32: only print
eax (low-part) or even edx (high-part).

Actually it's thee same problem when a function return a 8 bits value, the
high part of eax could contain junk values...

Here is an example of trace:

sys_read() {
  fget_light() {
  } 526
  vfs_read() {
    rw_verify_area() {
      security_file_permission() {
        cap_file_permission() {
        } 519
      } 1564
    } 2640
    do_sync_read() {
      pipe_read() {
        __might_sleep() {
        } 511
        pipe_wait() {
          prepare_to_wait() {
          } 760
          deactivate_task() {
            dequeue_task() {
              dequeue_task_fair() {
                dequeue_entity() {
                  update_curr() {
                    update_min_vruntime() {
                    } 504
                  } 1587
                  clear_buddies() {
                  } 512
                  add_cfs_task_weight() {
                  } 519
                  update_min_vruntime() {
                  } 511
                } 5602
                dequeue_entity() {
                  update_curr() {
                    update_min_vruntime() {
                    } 496
                  } 1631
                  clear_buddies() {
                  } 496
                  update_min_vruntime() {
                  } 527
                } 4580
                hrtick_update() {
                  hrtick_start_fair() {
                  } 488
                } 1489
              } 13700
            } 14949
          } 16016
          msecs_to_jiffies() {
          } 496
          put_prev_task_fair() {
          } 504
          pick_next_task_fair() {
          } 489
          pick_next_task_rt() {
          } 496
          pick_next_task_fair() {
          } 489
          pick_next_task_idle() {
          } 489

------------8<---------- thread 4 ------------8<----------

finish_task_switch() {
} 1203
do_softirq() {
  __do_softirq() {
    __local_bh_disable() {
    } 669
    rcu_process_callbacks() {
      __rcu_process_callbacks() {
        cpu_quiet() {
          rcu_start_batch() {
          } 503
        } 1647
      } 3128
      __rcu_process_callbacks() {
      } 542
    } 5362
    _local_bh_enable() {
    } 587
  } 8880
} 9986
kthread_should_stop() {
} 669
deactivate_task() {
  dequeue_task() {
    dequeue_task_fair() {
      dequeue_entity() {
        update_curr() {
          calc_delta_mine() {
          } 511
          update_min_vruntime() {
          } 511
        } 2813
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      287b6e68
    • F
      tracing/function-return-tracer: change the name into function-graph-tracer · fb52607a
      由 Frederic Weisbecker 提交于 
      Impact: cleanup

This patch changes the name of the "return function tracer" into
function-graph-tracer which is a more suitable name for a tracing
which makes one able to retrieve the ordered call stack during
the code flow.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      fb52607a
    • M
      x86, bts, ftrace: a BTS ftrace plug-in prototype · 1e9b51c2
      由 Markus Metzger 提交于 
      Impact: add new ftrace plugin

A prototype for a BTS ftrace plug-in.

The tracer collects branch trace in a cyclic buffer for each cpu.

The tracer is not configurable and the trace for each snapshot is
appended when doing cat /debug/tracing/trace.

This is a proof of concept that will be extended with future patches
to become a (hopefully) useful tool.
Signed-off-by: NMarkus Metzger <markus.t.metzger@intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      1e9b51c2
    • M
      x86, ftrace: call trace->open() before stopping tracing; add trace->print_header() · 8bba1bf5
      由 Markus Metzger 提交于 
      Add a callback to allow an ftrace plug-in to write its own header.

Move the call to trace->open() up a few lines.

The changes are required by the BTS ftrace plug-in.
Signed-off-by: NMarkus Metzger <markus.t.metzger@intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      8bba1bf5
  17. 24 11月, 2008 3 次提交
    • F
      tracing/function-return-tracer: free the return stack on free_task() · 65afa5e6
      由 Frederic Weisbecker 提交于 
      Impact: avoid losing some traces when a task is freed

do_exit() is not the last function called when a task finishes.
There are still some functions which are to be called such as
ree_task().  So we delay the freeing of the return stack to the
last moment.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      65afa5e6
    • P
      x86, mmiotrace: fix buffer overrun detection · 7ee1768d
      由 Pekka Paalanen 提交于 
      Impact: fix mmiotrace overrun tracing

When ftrace framework moved to use the ring buffer facility, the buffer
overrun detection was broken after 2.6.27 by commit

| commit 3928a8a2
| Author: Steven Rostedt <rostedt@goodmis.org>
| Date:   Mon Sep 29 23:02:41 2008 -0400
|
|     ftrace: make work with new ring buffer
|
|     This patch ports ftrace over to the new ring buffer.

The detection is now fixed by using the ring buffer API.

When mmiotrace detects a buffer overrun, it will report the number of
lost events. People reading an mmiotrace log must know if something was
missed, otherwise the data may not make sense.
Signed-off-by: NPekka Paalanen <pq@iki.fi>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      7ee1768d
    • F
      tracing/function-return-tracer: don't trace kfree while it frees the return stack · eae849ca
      由 Frederic Weisbecker 提交于 
      Impact: fix a crash

While I killed the cat process, I got sometimes the following (but rare)
crash:

[   65.689027] Pid: 2969, comm: cat Not tainted (2.6.28-rc6-tip #83) AMILO Li 2727
[   65.689027] EIP: 0060:[<00000000>] EFLAGS: 00010082 CPU: 1
[   65.689027] EIP is at 0x0
[   65.689027] EAX: 00000000 EBX: f66cd780 ECX: c019a64a EDX: f66cd780
[   65.689027] ESI: 00000286 EDI: f66cd780 EBP: f630be2c ESP: f630be24
[   65.689027]  DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
[   65.689027] Process cat (pid: 2969, ti=f630a000 task=f66cd780 task.ti=f630a000)
[   65.689027] Stack:
[   65.689027]  00000012 f630bd54 f630be7c c012c853 00000000 c0133cc9 f66cda54 f630be5c
[   65.689027]  f630be68 f66cda54 f66cd88c f66cd878 f7070000 00000001 f630be90 c0135dbc
[   65.689027]  f614a614 f630be68 f630be68 f65ba200 00000002 f630bf10 f630be90 c012cad6
[   65.689027] Call Trace:
[   65.689027]  [<c012c853>] ? do_exit+0x603/0x850
[   65.689027]  [<c0133cc9>] ? next_signal+0x9/0x40
[   65.689027]  [<c0135dbc>] ? dequeue_signal+0x8c/0x180
[   65.689027]  [<c012cad6>] ? do_group_exit+0x36/0x90
[   65.689027]  [<c013709c>] ? get_signal_to_deliver+0x20c/0x390
[   65.689027]  [<c0102b69>] ? do_notify_resume+0x99/0x8b0
[   65.689027]  [<c02e6d1a>] ? tty_ldisc_deref+0x5a/0x80
[   65.689027]  [<c014db9b>] ? trace_hardirqs_on+0xb/0x10
[   65.689027]  [<c02e6d1a>] ? tty_ldisc_deref+0x5a/0x80
[   65.689027]  [<c02e39b0>] ? n_tty_write+0x0/0x340
[   65.689027]  [<c02e1812>] ? redirected_tty_write+0x82/0x90
[   65.689027]  [<c019ee99>] ? vfs_write+0x99/0xd0
[   65.689027]  [<c02e1790>] ? redirected_tty_write+0x0/0x90
[   65.689027]  [<c019f342>] ? sys_write+0x42/0x70
[   65.689027]  [<c01035ca>] ? work_notifysig+0x13/0x19
[   65.689027] Code:  Bad EIP value.
[   65.689027] EIP: [<00000000>] 0x0 SS:ESP 0068:f630be24

This is because on do_exit(), kfree is called to free the return addresses stack
but kfree is traced and stored its return address in this stack.
This patch fixes it.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      eae849ca
  19. 23 11月, 2008 10 次提交