Here is an attempt to translate the prompt and help text into something
which is legible and, as a bonus, correct.
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

- fix PCI interrupt assignment by emulating ioc3 interrupt pin register
- use pci_probe_only mode
- select correct page size in bridge
- remove no longer needed ioc3_sio_init() code

[Ralf: Fix for 64kB or larger pagesizes]
Signed-off-by: NThomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Fix breakage introduced by converting hub_rt to clockevent.
Signed-off-by: NThomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Changes in the generic bootmem code broke memory setup for IP27. This
patch fixes this by replacing lots of special IP27 code with generic
bootmon code. This has been tested only on a single node.
Signed-off-by: NThomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The existing options are named CONFIG_CPU_R4300 and CONFIG_CPU_R4X00,
and they are directly below.
Reported-by: NRobert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The newly added check for valid stack pointer address breaks at least for
64bit kernels.  Use __get_user() for accessing stack content to avoid crashes,
when doing the backtrace.
Signed-off-by: NThomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Treat R4700 like R4600 in build_tlb_probe_entry. Without this fix kernel
will lock up.
Signed-off-by: NThomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Add API to delete custom DDMA device ids create with
au1xxx_ddma_device_add().
Signed-off-by: NManuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

au1xmmc.c driver depends on it, so export it for modules.
Signed-off-by: NManuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Jürgen Mell reported an FPU state corruption bug under CONFIG_PREEMPT,
and bisected it to commit v2.6.19-1363-gacc20761, "i386: add sleazy FPU
optimization".

Add tsk_used_math() checks to prevent calling math_state_restore()
which can sleep in the case of !tsk_used_math(). This prevents
making a blocking call in __switch_to().

Apparently "fpu_counter > 5" check is not enough, as in some signal handling
and fork/exec scenarios, fpu_counter > 5 and !tsk_used_math() is possible.

It's a side effect though. This is the failing scenario:

process 'A' in save_i387_ia32() just after clear_used_math()

Got an interrupt and pre-empted out.

At the next context switch to process 'A' again, kernel tries to restore
the math state proactively and sees a fpu_counter > 0 and !tsk_used_math()

This results in init_fpu() during the __switch_to()'s math_state_restore()

And resulting in fpu corruption which will be saved/restored
(save_i387_fxsave and restore_i387_fxsave) during the remaining
part of the signal handling after the context switch.
Bisected-by: NJürgen Mell <j.mell@t-online.de>
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Tested-by: NJürgen Mell <j.mell@t-online.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: stable@kernel.org

iommu/gart support misses suspend/resume code, which can do bad stuff,
including memory corruption on resume.  Prevent system suspend in case we
would be unable to resume.
Signed-off-by: NPavel Machek <pavel@suse.cz>
Tested-by: NPatrick <ragamuffin@datacomm.ch>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Fix this:

 WARNING: vmlinux.o(.text+0x114bb): Section mismatch in reference from
 the function nopat() to the function .cpuinit.text:pat_disable()
 The function nopat() references
 the function __cpuinit pat_disable().
 This is often because nopat lacks a __cpuinit
 annotation or the annotation of pat_disable is wrong.
Reported-by: N"Fabio Comolli" <fabio.comolli@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Clarify the usage of mtrr_lookup() in PAT code, and to make PAT code
resilient to mtrr lookup problems.

Specifically, pat_x_mtrr_type() is restructured to highlight, under what
conditions we look for mtrr hint. pat_x_mtrr_type() uses a default type
when there are any errors in mtrr lookup (still maintaining the pat
consistency). And, reserve_memtype() highlights its usage ot mtrr_lookup
for request type of '-1' and also defaults in a sane way on any mtrr
lookup failure.

pat.c looks at mtrr type of a range to get a hint on what mapping type
to request when user/API: (1) hasn't specified any type (/dev/mem
mapping) and we do not want to take performance hit by always mapping
UC_MINUS. This will be the case for /dev/mem mappings used to map BIOS
area or ACPI region which are WB'able. In this case, as long as MTRR is
not WB, PAT will request UC_MINUS for such mappings.

(2) user/API requests WB mapping while in reality MTRR may have UC or
WC. In this case, PAT can map as WB (without checking MTRR) and still
effective type will be UC or WC. But, a subsequent request to map same
region as UC or WC may fail, as the region will get trackked as WB in
PAT list. Looking at MTRR hint helps us to track based on effective type
rather than what user requested. Again, here mtrr_lookup is only used as
hint and we fallback to WB mapping (as requested by user) as default.

In both cases, after using the mtrr hint, we still go through the
memtype list to make sure there are no inconsistencies among multiple
users.
Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Tested-by: NRufus &amp; Azrael <rufus-azrael@numericable.fr>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Changed the call to find_e820_area_size to pass u64 instead of unsigned long.
Signed-off-by: NKevin Winchester <kjwinchester@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

OGAWA Hirofumi and Fede have reported rare pmd_ERROR messages:
mm/memory.c:127: bad pmd ffff810000207xxx(9090909090909090).

Initialization's cleanup_highmap was leaving alignment filler
behind in the pmd for MODULES_VADDR: when vmalloc's guard page
would occupy a new page table, it's not allocated, and then
module unload's vfree hits the bad 9090 pmd entry left over.
Signed-off-by: NHugh Dickins <hugh@veritas.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Mika Kukkonen noticed that the nesting check in early_iounmap() is not
actually done.
Reported-by: NMika Kukkonen <mikukkon@srv1-m700-lanp.koti>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Cc: torvalds@linux-foundation.org
Cc: arjan@linux.intel.com
Cc: mikukkon@iki.fi
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Fix the math emulation that got broken with the recent lazy allocation of FPU
area. init_fpu() need to be added for the math-emulation path aswell
for the FPU area allocation.

math emulation enabled kernel booted fine with this, in the presence
of "no387 nofxsr" boot param.
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Cc: hpa@zytor.com
Cc: mingo@elte.hu
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

The RT team has been searching for a nasty latency. This latency shows
up out of the blue and has been seen to be as big as 5ms!

Using ftrace I found the cause of the latency.

   pcscd-2995  3dNh1 52360300us : irq_exit (smp_apic_timer_interrupt)
   pcscd-2995  3dN.2 52360301us : idle_cpu (irq_exit)
   pcscd-2995  3dN.2 52360301us : rcu_irq_exit (irq_exit)
   pcscd-2995  3dN.1 52360771us : smp_apic_timer_interrupt (apic_timer_interrupt
)
   pcscd-2995  3dN.1 52360771us : exit_idle (smp_apic_timer_interrupt)

Here's an example of a 400 us latency. pcscd took a timer interrupt and
returned with "need resched" enabled, but did not reschedule until after
the next interrupt came in at 52360771us 400us later!

At first I thought we somehow missed a preemption check in entry.S. But
I also noticed that this always seemed to happen during a __delay call.

   pcscd-2995  3dN.2 52360836us : rcu_irq_exit (irq_exit)
   pcscd-2995  3.N.. 52361265us : preempt_schedule (__delay)

Looking at the x86 delay, I found my problem.

In git commit 35d5d08a, Andrew Morton
placed preempt_disable around the entire delay due to TSC's not working
nicely on SMP.  Unfortunately for those that care about latencies this
is devastating! Especially when we have callers to mdelay(8).

Here I enable preemption during the loop and account for anytime the task
migrates to a new CPU. The delay asked for may be extended a bit by
the migration, but delay only guarantees that it will delay for that minimum
time. Delaying longer should not be an issue.

[
  Thanks to Thomas Gleixner for spotting that cpu wasn't updated,
    and to place the rep_nop between preempt_enabled/disable.
]
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Cc: akpm@osdl.org
Cc: Clark Williams <clark.williams@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Luis Claudio R. Goncalves" <lclaudio@uudg.org>
Cc: Gregory Haskins <ghaskins@novell.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andi Kleen <andi-suse@firstfloor.org>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Priit Laes reported the following warning:

Call Trace:
 [<ffffffff8022f1e1>] warn_on_slowpath+0x51/0x63
 [<ffffffff80282e48>] sys_ioctl+0x2d/0x5d
 [<ffffffff805185ff>] _spin_lock+0xe/0x24
 [<ffffffff80227459>] task_rq_lock+0x3d/0x73
 [<ffffffff805133c3>] set_cpu_sibling_map+0x336/0x350
 [<ffffffff8021c1b8>] read_apic_id+0x30/0x62
 [<ffffffff806d921d>] verify_local_APIC+0x90/0x138
 [<ffffffff806d84b5>] native_smp_prepare_cpus+0x1f9/0x305
 [<ffffffff806ce7b1>] kernel_init+0x59/0x2d9
 [<ffffffff80518a26>] _spin_unlock_irq+0x11/0x2b
 [<ffffffff8020bf48>] child_rip+0xa/0x12
 [<ffffffff806ce758>] kernel_init+0x0/0x2d9
 [<ffffffff8020bf3e>] child_rip+0x0/0x12

fix this by generally disabling preemption in native_smp_prepare_cpus().
Reported-and-bisected-by: NPriit Laes <plaes@plaes.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

for http://bugzilla.kernel.org/show_bug.cgi?id=10613

BIOS bug, APIC version is 0 for CPU#0! fixing up to 0x10. (tell your hw vendor)

v2: fix 64 bit compilation
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Gabriel C <nix.or.die@googlemail.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

RSK7203 is supportable through the generic machvec, so we add a defconfig
for those bits. This gets updated with more complete board support later.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Work around:
arch/arm/mach-pxa/tosa.c: In function `tosa_poweroff':
arch/arm/mach-pxa/tosa.c:470: error: `GPIO_OUT' undeclared (first use in this function)
arch/arm/mach-pxa/tosa.c:470: error: (Each undeclared identifier is reported only once
arch/arm/mach-pxa/tosa.c:470: error: for each function it appears in.)

The proper fix exists in the PXA branch of my kernel git tree, which
will be pushed during the next merge window.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Add the IORESOURCE_IRQ_HIGHEDGE to the DM9000 IRQ resource
to stop the driver itself complaining it was not given
any flags to use.
Signed-off-by: NMike Rapoport <mike@compulab.co.il>
Acked-by: NEric Miao <eric.miao@marvell.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Add the IORESOURCE_IRQ_HIGHEDGE to the DM9000 IRQ resource
to stop the driver itself complaining it was not given
any flags to use.
Signed-off-by: NMike Rapoport <mike@compulab.co.il>
Acked-by: NEric Miao <eric.miao@marvell.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

4k stacks on nommu ends up blowing up with all sorts of interesting
slab corruption. Disable this by default unless BROKEN is also
enabled.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Replace the COPY_UNALIGNED_WORD helper.
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

This patch fixes the following build error caused by
commit a1dc4b59
(sh: intc_sh5 depends on cayman board for IRQ priority table.):

<--  snip  -->

...
  CC      arch/sh/kernel/cpu/irq/intc-sh5.o
/home/bunk/linux/kernel-2.6/git/linux-2.6/arch/sh/kernel/cpu/irq/intc-sh5.c: In function 'plat_irq_setup':
/home/bunk/linux/kernel-2.6/git/linux-2.6/arch/sh/kernel/cpu/irq/intc-sh5.c:257: error: expected declaration or statement at end of input
make[4]: *** [arch/sh/kernel/cpu/irq/intc-sh5.o] Error 1

<--  snip  -->
Reported-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Signed-off-by: NEric Miao <eric.miao@marvell.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NBryan Wu <cooloney@kernel.org>

AD7877 use SSEL_2 (P9.9) and IRQ_PF8 (P9.14) on BF527

 - populating JP3 to enable STAMP
 - disable SW11.2 to disconnect SSEL_2/PF12 from Rotary NAND
 - disable SW18.1 to disconnect SSEL_2 from MAX1233 touchscreen chip
Signed-off-by: NBryan Wu <cooloney@kernel.org>

The node for DMA2 in the MPC8610 HPCD device tree has the wrong compatible
properties.  This breaks the DMA driver and the sound driver.
Signed-off-by: NTimur Tabi <timur@freescale.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Currently ext4 and fuse fail to link if modular:
ERROR: "copy_page" [fs/fuse/fuse.ko] undefined!
ERROR: "empty_zero_page" [fs/ext4/ext4dev.ko] undefined!
make[3]: *** [__modpost] Error 1
make[2]: *** [modules] Error 2
make[1]: *** [sub-make] Error 2

While arch ppc exists it may as well compile, so this exports those
symbols (which are already exported in arch/powerpc).
Signed-off-by: NTony Breeds <tony@bakeyournoodle.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

The correct instruction format of idte is "idte r1,r3,r2" with
r1 at bit 24, r3 at bit 16 and r2 at bit 28.
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>