Rename dpio_lock to sb_lock to inform the reader that its primary
purpose is to protect the sideband mailbox rather than some DPIO
state.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Connector states were being allocated in intel_setup_outputs() in loop
over all connectors. That meant hot-added connectors would have a NULL
state. Since the change to use a struct drm_atomic_state for the legacy
modeset, connector states are necessary for the i915 driver to function
properly, so that would lead to oopses.

Broken by

commit 944b0c76
Author: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Date:   Fri Mar 20 16:18:07 2015 +0200

    drm/i915: Copy the staged connector config to the legacy atomic state

v2: Fix test for intel_connector_init() success in lvds and sdvo (PRTS)
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reported-and-tested-by: NNicolas Kalkhof <nkalkhof@web.de>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

Connector states were being allocated in intel_setup_outputs() in loop
over all connectors. That meant hot-added connectors would have a NULL
state. Since the change to use a struct drm_atomic_state for the legacy
modeset, connector states are necessary for the i915 driver to function
properly, so that would lead to oopses.

v2: Fix test for intel_connector_init() success in lvds and sdvo (PRTS)
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reported-and-tested-by: NNicolas Kalkhof <nkalkhof@web.de>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

So that we can add connector states to the drm_atomic_state used in the
legacy modeset.
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This isuue got introduced in -

commit 24ee0e64
Author: Gaurav K Singh <gaurav.k.singh@intel.com>
Date:   Fri Dec 5 14:24:21 2014 +0530

    drm/i915: Update the DSI enable path to support dual
Signed-off-by: NShobhit Kumar <shobhit.kumar@intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

LP_OUTPUT_HOLD is only in MIPI_PORT_CTRL(PORT_A) even for PORT_C in case
of dual link. In the dual link implementation, the bit is correctly set
or unset for hardcoded PORT_A, but for bit update the register base value
is read by using MIPI_PORT_CTRL(port) in a loop. The second iteration will
read base value from PORT_C and program for PORT_A. Mostly in case of dual
link all other bit values should be same, but logically we should read from
PORT_A. So hardcode to read initial value from PORT_A as well.
Signed-off-by: NShobhit Kumar <shobhit.kumar@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

The removed functions can be resurrected in intel_dsi.c as need arises.
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-By: NShobhit Kumar <shobhit.kumar@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

No functional changes.
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-By: NShobhit Kumar <shobhit.kumar@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Add basic support for using the drm mipi dsi framework for DSI. We don't
use device tree which is pretty much required by mipi_dsi_host_register
and friends, and we don't have the kind of device model the functions
expect either. So we cheat and use it as a library to abstract what we
need: a nice, clean interface for DSI transfers. This means we will have
to be careful with what functions we call, as the driver model devices
in mipi_dsi_host and mipi_dsi_device will *not* be initialized.
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-By: NShobhit Kumar <shobhit.kumar@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Replace intel_dsi_device and intel_dsi_dev_ops with drm_panel and
drm_panel_funcs. They are adequate for what we have now, and if we end
up needing more than this we should improve drm_panel. This will keep us
better aligned with the drm core infrastructure.

The panel driver initialization changes a bit. It still remains hideous,
but fixing that is beyond the scope here.

v2: extend mode config mutex to cover drm_panel_get_modes (Shobhit)
    vbt_panel->intel_dsi = intel_dsi in vbt panel init (Shobhit)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-By: NShobhit Kumar <shobhit.kumar@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Even though we only support atomic plane updates at the moment, we still
need to add an .atomic_get_property() entrypoint for connectors before
we allow the driver to flip on the DRIVER_ATOMIC bit.  As soon as that
bit gets set, the DRM core will start adding atomic connector properties
(in addition to the plane properties we care about at the moment), so we
need to be able to handle the new way the DRM core will interact with
us.

For simplicity, we just lookup driver-specific connector properties in
the usual shadow array maintained by the core.  Once we get real atomic
modeset support for crtc's and planes, this code should be re-written to
pull the data out of crtc/connector state structures.

v2: Fix intel_dvo and intel_dsi that I missed on the first pass (Ander)
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NAnder Conselvan de Oliveira <conselvan2@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We want to enable/test plane updates via the atomic interface, but as
soon as we flip DRIVER_ATOMIC on, the DRM core will take some atomic
codepaths to lookup properties during drmModeGetConnector() and some of
those codepaths unconditionally dereference connector->state
(specifically when looking up the CRTC ID property in
drm_atomic_connector_get_property()).  Create a dummy connector state
for each connector at init time to ensure the DRM core doesn't try to
dereference a NULL connector->state.  The actual connector properties
will never be updated or contain useful information, but since we're
doing this specifically for testing/debug of the plane operations (and
only when a specific kernel module option is given), that shouldn't
really matter.

Once we start creating connector states, the DRM core will want to be
able to clean them up for us.  We also need to hook up the destruction
entrypoint to the core's helper.

v2: Squash in the patch to set the state destruction hook (Ander & Bob)

v3: Only create dummy connector states when we're actually faking
    atomic support.  (Ander)
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NAnder Conselvan de Oliveira <conselvan2@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Remove all the trivial and/or dummy callbacks from intel dsi device
ops. Merge send_otp_cmds into panel_reset as they're called back to
back.

This will be helpful for switching to use drm_panel for the
callbacks. If we ever need the additional callbacks, we should add them
to drm_panel funcs.
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-By: NShobhit Kumar <shobhit.kumar@intel.com>
[danvet: Resolve tiny conflict with ongoing atomic work.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Add port parameter to wait_for_dsi_fifo_empty, and call it for each dsi
port.

We can now remove the transitional intel_dsi_pipe_to_port() function.
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-By: NShobhit Kumar <shobhit.kumar@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

wait_for_dsi_fifo_empty can be static in intel_dsi.c. No functional
changes.
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-By: NShobhit Kumar <shobhit.kumar@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This seems like the right thing to do. This also gets rid of a call to
intel_dsi_pipe_to_port() which we want to remove eventually.

v2: add braces to fix else logic (Shobhit)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-By: NShobhit Kumar <shobhit.kumar@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Instead of having the for each dsi port loop within dpi_send_cmd(), add
a port parameter to the function and call it for each port instead.

This is a rewrite of

commit 4510cd77
Author: Gaurav K Singh <gaurav.k.singh@intel.com>
Date:   Thu Dec 4 10:58:51 2014 +0530

    drm/i915: Dual link needs Shutdown and Turn on packet for both ports

to add more flexibility in using dpi_send_cmd() for just one port as
necessary. No functional changes.
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-By: NShobhit Kumar <shobhit.kumar@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

To match the semantics of drm_crtc->state, which this will eventually
become. The allocation of the memory for config will be fixed in a
followup patch. By adding the extra _config field to intel_crtc it was
possible to generate this entire patch with the cocci script below.

@@ @@
struct intel_crtc {
...
-struct intel_crtc_state config;
+struct intel_crtc_state _config;
+struct intel_crtc_state *config;
...
}
@@ struct intel_crtc *crtc; @@
-memset(&crtc->config, 0, sizeof(crtc->config));
+memset(crtc->config, 0, sizeof(*crtc->config));
@@ @@
__intel_set_mode(...) {
<...
-to_intel_crtc(crtc)->config = *pipe_config;
+(*(to_intel_crtc(crtc)->config)) = *pipe_config;
...>
}
@@ @@
intel_crtc_init(...) {
...
WARN_ON(drm_crtc_index(&intel_crtc->base) != intel_crtc->pipe);
+intel_crtc->config = &intel_crtc->_config;
return;
...
}
@@ struct intel_crtc *crtc; @@
-&crtc->config
+crtc->config
@@ struct intel_crtc *crtc; identifier member; @@
-crtc->config.member
+crtc->config->member
@@ expression E; @@
-&(to_intel_crtc(E)->config)
+to_intel_crtc(E)->config
@@ expression E; identifier member; @@
-to_intel_crtc(E)->config.member
+to_intel_crtc(E)->config->member

v2: Clarify manual changes by splitting them into another patch. (Matt)
    Improve cocci script to generate even more of the changes. (Ander)
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: NMatt Roper <matthew.d.roper@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

And get rid of the duplicate mode structures. This patch was generated
with the following semantic patch:

@@ @@
struct intel_crtc_state {
+struct drm_crtc_state base;
+
...
-struct drm_display_mode requested_mode;
-struct drm_display_mode adjusted_mode;
...
}
@@ struct intel_crtc_state *state; @@
-state->adjusted_mode
+state->base.adjusted_mode
@@ struct intel_crtc_state *state; @@
-state->requested_mode
+state->base.mode
@@ struct intel_crtc_state state; @@
-state.adjusted_mode
+state.base.adjusted_mode
@@ struct intel_crtc_state state; @@
-state.requested_mode
+state.base.mode
@@ struct drm_crtc *crtc; @@
-to_intel_crtc(crtc)->config.adjusted_mode
+to_intel_crtc(crtc)->config.base.adjusted_mode
@@ identifier member; expression E; @@
-PIPE_CONF_CHECK_FLAGS(adjusted_mode.member, E);
+PIPE_CONF_CHECK_FLAGS(base.adjusted_mode.member, E);
@@ identifier member; @@
-PIPE_CONF_CHECK_I(adjusted_mode.member);
+PIPE_CONF_CHECK_I(base.adjusted_mode.member);
@@ identifier member; @@
-PIPE_CONF_CHECK_CLOCK_FUZZY(adjusted_mode.member);
+PIPE_CONF_CHECK_CLOCK_FUZZY(base.adjusted_mode.member);

v2: Completely generate the patch with cocci. (Ander)
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: NMatt Roper <matthew.d.roper@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The objective is to make this structure usable with the atomic helpers,
so let's start with the rename. Patch generated with coccinelle:

@@ @@
-struct intel_crtc_config {
+struct intel_crtc_state {
...
}
@@ @@
-struct intel_crtc_config
+struct intel_crtc_state

v2: Completely generate the patch with cocci. (Ander)
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: NMatt Roper <matthew.d.roper@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Due to hardware limitations on BYT, MIPI Port C DPI Enable bit
does not get set. To check whether DSI Port C was enabled in BIOS,
check the Pipe B enable bit for DSI Port C. In hardware, DSI Port C
is linked with Pipe B.

v2: Addressed review comments of Jani, Nikula
    - Used platform checks for this software workaround for BYT
Signed-off-by: NGaurav K Singh <gaurav.k.singh@intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Common bit to be used for both DSI Port A & DSI Port C.
Signed-off-by: NGaurav K Singh <gaurav.k.singh@intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We need to program both port registers during dual link enable path.

v2: Address review comments by Jani
    - Used a for loop instead of do-while loop.

v3: Used for_each_dsi_port macro instead of for loop

v4: Renamed mode_hactive variable to mode_hdisplay
Signed-off-by: NGaurav K Singh <gaurav.k.singh@intel.com>
Signed-off-by: NShobhit Kumar <shobhit.kumar@intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We need to program both port registers during dual link disable path.

v2: Address review comments by Jani
    - Used a for loop instead of do-while loop.

v3: Used for_each_dsi_port macro instead of for loop

v4: Added comments for the usage of AFE latchout bit
Signed-off-by: NGaurav K Singh <gaurav.k.singh@intel.com>
Signed-off-by: NShobhit Kumar <shobhit.kumar@intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

hactive, hfp, hbp, hsync needs to be halved for dual link MIPI Panels.
Accordingly timing related mmio regs needs to be programmed for both MIPI Ports.

v2: Address review comments by Jani
    - Used a for loop instead of do-while loop

v3: Used for_each_dsi_port macro instead of for loop
Signed-off-by: NGaurav K Singh <gaurav.k.singh@intel.com>
Signed-off-by: NShobhit Kumar <shobhit.kumar@intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

For dual link MIPI Panels, each port needs half of pixel clock. Pixel overlap
can be enabled if needed by panel, then in that case, pixel clock will be
increased for extra pixels.

v2 : Address review comments by Jani
     - Removed the bit mask used for ->dual_link
     - Used DSI instead of MIPI for #define variables

v3: Added the VLV_DISPLAY_BASE to VLV_CHICKEN_3 register
Signed-off-by: NGaurav K Singh <gaurav.k.singh@intel.com>
Signed-off-by: NShobhit Kumar <shobhit.kumar@intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

For Dual Link MIPI Panels, both Port A and Port C should be enabled
during the MIPI encoder enabling sequence. Similarly, during the
disabling sequence, both ports needs to be disabled.

v2: Used for_each_dsi_port macro instead of for loop

v3: Used intel_dsi->ports instead of dual_link var for dual link configuration check

v4: Masking of the required MIPI port bits before writing proper values
Signed-off-by: NGaurav K Singh <gaurav.k.singh@intel.com>
Signed-off-by: NShobhit Kumar <shobhit.kumar@intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This patch is in preparation for the DSI dual link
port enable and disable related changes.
Signed-off-by: NGaurav K Singh <gaurav.k.singh@intel.com>
Signed-off-by: NShobhit Kumar <shobhit.kumar@intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Later on this can include multiple ports (e.g. (1 << PORT_A) | (1 <<
PORT_C)) to describe dual link DSI.
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NGaurav K Singh <gaurav.k.singh@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

MIPI DSI works on ports A and C, which map to pipes A and B,
respectively. Things are going to get more complicated with the
introduction of dual link DSI support, so clean up the register defines
and code to match reality.
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NGaurav K Singh <gaurav.k.singh@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

- fini goes with init, so call it intel_power_domains_fini. While
  at it shovel some of the fini code that leaked out of it back in.

- give power_enabled functions the verb _is_ to make the meaning clearer.
  Also use a __ prefix instead of _unlocked to really discourage users.

- rename runtime_pm_init/fini to enable/disable since that's what they do.
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

I'm not really that insisting on checkpath compliance, but ragged
function paramter alignment does get me. Please adjust your editor to
just do this for you.

Cc: Shobhit Kumar <shobhit.kumar@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

v2: Updated the error log as suggested by Imre
Signed-off-by: NShobhit Kumar <shobhit.kumar@intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Check in vlv_crtc_clock_get if DPLL is enabled before calling dpio read.
It will not be enabled for DSI and avoid dpio read WARN dumps.

Absence of ->get_config was causing other WARN dumps as well. Update
dpll_hw_state as well correctly

v2: Address review comments by Daniel
    - Check if DPLL is enabled rather than checking pipe output type
    - set adjusted_mode->flags to 0 in compute_config rather than using
      pipe_config->quirks
    - Add helper function in intel_dsi_pll.c and use that in intel_dsi.c
    - updated dpll_hw_state correctly
    - Updated commit message and title

v3: Address review comments by Imre
    - Proper masking of P1, M1 fields while computing divisors
    - assert in case of bpp mismatch
    - guard for divide by 0 while computing pclk
    - Use ARRAY_SIZE instead of direct calculation
Signed-off-by: NShobhit Kumar <shobhit.kumar@intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Ensure that the DSI packets for a particular sequence are completely
sent before going ahead in the enabling or disabling of the panel
Signed-off-by: NShobhit Kumar <shobhit.kumar@intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We should keep DEVICE_READY bit set in the ULPS enter sequence. In
exit sequence also we should set DEVICE_READY, but thats causing
blankout for me. Also exit sequence is simplified as per hw team
recommendation.

This should fix -
[drm:intel_dsi_clear_device_ready] *ERROR* DSI LP not going Low

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=80818Signed-off-by: NShobhit Kumar <shobhit.kumar@intel.com>
Tested-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

Introduce generic functions to register and unregister connectors. This
provides a common place to add and remove associated user space
interfaces.
Signed-off-by: NThomas Wood <thomas.wood@intel.com>
Reviewed-by: NDavid Herrmann <dh.herrmann@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

intel_dsi_init() bails out without freeing the memory 'intel_dsi' and
'intel_connector' point to. Simply bail out before allocating memory.

Picked up by Coverity - CID 1222750.
Signed-off-by: NChristoph Jaeger <christophjaeger@linux.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Functions that can't fail are such a bliss to work with, it'd be shame
to miss the occasion. The "failure" mode is the DSI connector not being
created, the rest of the initialization can carry on happily.

We weren't even checking that value anyway.
Suggested-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Suggested-by: NShobhit Kumar <shobhit.kumar@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Shobhit Kumar <shobhit.kumar@intel.com>
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
[danvet: Also convert the missed return statement due to other patches
merged meanwhile.]
[danvet2: Squash in fixup from Damien to remove empty return; at the
end of intel_dsi_init.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

If we disable first the port (by disabling DPI) and only then the
display pipe the pipe-off flag will never be set, possibly leading to a
hanged pipe state at the next modeset-enable.

Note that according to the VLV2 display cluster HAS, we should disable
the port before the pipe. This doesn't seem to match reality based on
the above and it's also asymmetric with the enabling sequence, where we
first enable the port and then the pipe.

v2:
- send the panel shutdown command before stopping the pipe, since this
  is the recommended sequence (Shobhit)
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NShobhit Kumar <shobhit.kumar@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>