1. 09 11月, 2014 2 次提交
    • L
      Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip · a50d7156
      Linus Torvalds 提交于
      Pull irq fixes from Thomas Gleixner:
       "Two fixlets for the armada SoC interrupt controller"
      
      * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
        irqchip: armada-370-xp: Fix MPIC interrupt handling
        irqchip: armada-370-xp: Fix MSI interrupt handling
      a50d7156
    • L
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media · ae04e1ca
      Linus Torvalds 提交于
      Pull media fixes from Mauro Carvalho Chehab:
       "For:
         - some regression fixes at the Remote Controller core and imon driver
         - a build fix for certain randconfigs with ir-hix5hd2
         - don't feed power to satellite system at ds3000 driver init
      
        It also contains some fixes for drivers added for Kernel 3.18:
         - some fixes at the new ISDB-S driver, and the corresponding bits to
           fix some descriptors for this Japanese TV standard at the DVB core
         - two warning cleanups for sp2 driver if PM is disabled
         - change the default mode for the new vivid driver"
      
      * git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
        [media] sp2: sp2_init() can be static
        [media] dvb:tc90522: fix always-false expression
        [media] dvb-core: set default properties of ISDB-S
        [media] dvb:tc90522: fix stats report
        [media] vivid: default to single planar device instances
        [media] imon: fix other RC type protocol support
        [media] ir-hix5hd2 fix build warning
        [media] ds3000: fix LNB supply voltage on Tevii S480 on initialization
        [media] rc5-decoder: BZ#85721: Fix RC5-SZ decoding
        [media] rc-core: fix protocol_change regression in ir_raw_event_register
      ae04e1ca
  2. 08 11月, 2014 4 次提交
    • L
      Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus · 6ac94d3a
      Linus Torvalds 提交于
      Pull MIPS updates from Ralf Baechle:
       "This weeks' round of MIPS bug fixes for 3.18:
      
         - wire up the bpf syscall
         - fix TLB dump output for R3000 class TLBs
         - fix strnlen_user return value if no NUL character was found.
         - fix build with binutils 2.24.51+.  While there is no binutils 2.25
           release yet, toolchains derived from binutils 2.24.51+ are already
           in common use.
         - the Octeon GPIO code forgot to offline GPIO IRQs.
         - fix build error for XLP.
         - fix possible BUG assertion with EVA for CMA"
      
      * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
        MIPS: Fix build with binutils 2.24.51+
        MIPS: R3000: Fix debug output for Virtual page number
        MIPS: Fix strnlen_user() return value in case of overlong strings.
        MIPS: CMA: Do not reserve memory if not required
        MIPS: Wire up bpf syscall.
        MIPS/Xlp: Remove the dead function destroy_irq() to fix build error
        MIPS: Octeon: Make Octeon GPIO IRQ chip CPU hotplug-aware
      6ac94d3a
    • L
      Merge tag 'xfs-for-linus-3.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs · 661b99e9
      Linus Torvalds 提交于
      Pull xfs fixes from Dave Chinner:
       "This update fixes a warning in the new pagecache_isize_extended() and
        updates some related comments, another fix for zero-range
        misbehaviour, and an unforntuately large set of fixes for regressions
        in the bulkstat code.
      
        The bulkstat fixes are large but necessary.  I wouldn't normally push
        such a rework for a -rcX update, but right now xfsdump can silently
        create incomplete dumps on 3.17 and it's possible that even xfsrestore
        won't notice that the dumps were incomplete.  Hence we need to get
        this update into 3.17-stable kernels ASAP.
      
        In more detail, the refactoring work I committed in 3.17 has exposed a
        major hole in our QA coverage.  With both xfsdump (the major user of
        bulkstat) and xfsrestore silently ignoring missing files in the
        dump/restore process, incomplete dumps were going unnoticed if they
        were being triggered.  Many of the dump/restore filesets were so small
        that they didn't evenhave a chance of triggering the loop iteration
        bugs we introduced in 3.17, so we didn't exercise the code
        sufficiently, either.
      
        We have already taken steps to improve QA coverage in xfstests to
        avoid this happening again, and I've done a lot of manual verification
        of dump/restore on very large data sets (tens of millions of inodes)
        of the past week to verify this patch set results in bulkstat behaving
        the same way as it does on 3.16.
      
        Unfortunately, the fixes are not exactly simple - in tracking down the
        problem historic API warts were discovered (e.g xfsdump has been
        working around a 20 year old bug in the bulkstat API for the past 10
        years) and so that complicated the process of diagnosing and fixing
        the problems.  i.e. we had to fix bugs in the code as well as
        discover and re-introduce the userspace visible API bugs that we
        unwittingly "fixed" in 3.17 that xfsdump relied on to work correctly.
      
        Summary:
      
         - incorrect warnings about i_mutex locking in pagecache_isize_extended()
           and updates comments to match expected locking
         - another zero-range bug fix for stray file size updates
         - a bunch of fixes for regression in the bulkstat code introduced in
           3.17"
      
      * tag 'xfs-for-linus-3.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs:
        xfs: track bulkstat progress by agino
        xfs: bulkstat error handling is broken
        xfs: bulkstat main loop logic is a mess
        xfs: bulkstat chunk-formatter has issues
        xfs: bulkstat chunk formatting cursor is broken
        xfs: bulkstat btree walk doesn't terminate
        mm: Fix comment before truncate_setsize()
        xfs: rework zero range to prevent invalid i_size updates
        mm: Remove false WARN_ON from pagecache_isize_extended()
        xfs: Check error during inode btree iteration in xfs_bulkstat()
        xfs: bulkstat doesn't release AGI buffer on error
      661b99e9
    • L
      Merge tag 'regulator-v3.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator · 51f83ef0
      Linus Torvalds 提交于
      Pull regulator fixes from Mark Brown:
       "More changes than I'd like here, most of them for a single bug
        repeated in a bunch of drivers with data not being initialized
        correctly, plus a fix to lower the severity of a warning introduced in
        the last merge window which can legitimately go off so we don't want
        to alarm users excessively"
      
      * tag 'regulator-v3.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
        regulator: s2mpa01: zero-initialize regulator match table array
        regulator: max8660: zero-initialize regulator match table array
        regulator: max77802: zero-initialize regulator match table
        regulator: max77686: zero-initialize regulator match table
        regulator: max1586: zero-initialize regulator match table array
        regulator: max77693: Fix use of uninitialized regulator config
        regulator: of: Lower the severity of the error with no container
      51f83ef0
    • L
      Merge tag 'spi-v3.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi · 1395b9cf
      Linus Torvalds 提交于
      Pull spi bugfixes from Mark Brown:
       "A couple of small driver fixes for v3.18, both quite problematic if
        you hit a use case that's affected"
      
      * tag 'spi-v3.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
        spi: pxa2xx: toggle clocks on suspend if not disabled by runtime PM
        spi: fsl-dspi: Fix CTAR selection
      1395b9cf
  3. 07 11月, 2014 12 次提交
    • M
      MIPS: Fix build with binutils 2.24.51+ · 842dfc11
      Manuel Lauss 提交于
      Starting with version 2.24.51.20140728 MIPS binutils complain loudly
      about mixing soft-float and hard-float object files, leading to this
      build failure since GCC is invoked with "-msoft-float" on MIPS:
      
      {standard input}: Warning: .gnu_attribute 4,3 requires `softfloat'
        LD      arch/mips/alchemy/common/built-in.o
      mipsel-softfloat-linux-gnu-ld: Warning: arch/mips/alchemy/common/built-in.o
       uses -msoft-float (set by arch/mips/alchemy/common/prom.o),
       arch/mips/alchemy/common/sleeper.o uses -mhard-float
      
      To fix this, we detect if GAS is new enough to support "-msoft-float" command
      option, and if it does, we can let GCC pass it to GAS;  but then we also need
      to sprinkle the files which make use of floating point registers with the
      necessary ".set hardfloat" directives.
      Signed-off-by: NManuel Lauss <manuel.lauss@gmail.com>
      Cc: Linux-MIPS <linux-mips@linux-mips.org>
      Cc: Matthew Fortune <Matthew.Fortune@imgtec.com>
      Cc: Markos Chandras <Markos.Chandras@imgtec.com>
      Cc: Maciej W. Rozycki <macro@linux-mips.org>
      Patchwork: https://patchwork.linux-mips.org/patch/8355/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
      842dfc11
    • D
      xfs: track bulkstat progress by agino · 00275899
      Dave Chinner 提交于
      The bulkstat main loop progress is tracked by the "lastino"
      variable, which is a full 64 bit inode. However, the loop actually
      works on agno/agino pairs, and so there's a significant disconnect
      between the rest of the loop and the main cursor. Convert this to
      use the agino, and pass the agino into the chunk formatting function
      and convert it too.
      
      This gets rid of the inconsistency in the loop processing, and
      finally makes it simple for us to skip inodes at any point in the
      loop simply by incrementing the agino cursor.
      
      cc: <stable@vger.kernel.org> # 3.17
      Signed-off-by: NDave Chinner <dchinner@redhat.com>
      Reviewed-by: NBrian Foster <bfoster@redhat.com>
      Signed-off-by: NDave Chinner <david@fromorbit.com>
      00275899
    • D
      xfs: bulkstat error handling is broken · febe3cbe
      Dave Chinner 提交于
      The error propagation is a horror - xfs_bulkstat() returns
      a rval variable which is only set if there are formatter errors. Any
      sort of btree walk error or corruption will cause the bulkstat walk
      to terminate but will not pass an error back to userspace. Worse
      is the fact that formatter errors will also be ignored if any inodes
      were correctly formatted into the user buffer.
      
      Hence bulkstat can fail badly yet still report success to userspace.
      This causes significant issues with xfsdump not dumping everything
      in the filesystem yet reporting success. It's not until a restore
      fails that there is any indication that the dump was bad and tha
      bulkstat failed. This patch now triggers xfsdump to fail with
      bulkstat errors rather than silently missing files in the dump.
      
      This now causes bulkstat to fail when the lastino cookie does not
      fall inside an existing inode chunk. The pre-3.17 code tolerated
      that error by allowing the code to move to the next inode chunk
      as the agino target is guaranteed to fall into the next btree
      record.
      
      With the fixes up to this point in the series, xfsdump now passes on
      the troublesome filesystem image that exposes all these bugs.
      
      cc: <stable@vger.kernel.org>
      Signed-off-by: NDave Chinner <dchinner@redhat.com>
      Reviewed-by: NBrian Foster <bfoster@redhat.com>
      febe3cbe
    • D
      xfs: bulkstat main loop logic is a mess · 6e57c542
      Dave Chinner 提交于
      There are a bunch of variables tha tare more wildy scoped than they
      need to be, obfuscated user buffer checks and tortured "next inode"
      tracking. This all needs cleaning up to expose the real issues that
      need fixing.
      
      cc: <stable@vger.kernel.org> # 3.17
      Signed-off-by: NDave Chinner <dchinner@redhat.com>
      Reviewed-by: NBrian Foster <bfoster@redhat.com>
      Signed-off-by: NDave Chinner <david@fromorbit.com>
      6e57c542
    • D
      xfs: bulkstat chunk-formatter has issues · 2b831ac6
      Dave Chinner 提交于
      The loop construct has issues:
      	- clustidx is completely unused, so remove it.
      	- the loop tries to be smart by terminating when the
      	  "freecount" tells it that all inodes are free. Just drop
      	  it as in most cases we have to scan all inodes in the
      	  chunk anyway.
      	- move the "user buffer left" condition check to the only
      	  point where we consume space int eh user buffer.
      	- move the initialisation of agino out of the loop, leaving
      	  just a simple loop control logic using the clusteridx.
      
      Also, double handling of the user buffer variables leads to problems
      tracking the current state - use the cursor variables directly
      rather than keeping local copies and then having to update the
      cursor before returning.
      
      cc: <stable@vger.kernel.org> # 3.17
      Signed-off-by: NDave Chinner <dchinner@redhat.com>
      Reviewed-by: NBrian Foster <bfoster@redhat.com>
      Signed-off-by: NDave Chinner <david@fromorbit.com>
      2b831ac6
    • D
      xfs: bulkstat chunk formatting cursor is broken · bf4a5af2
      Dave Chinner 提交于
      The xfs_bulkstat_agichunk formatting cursor takes buffer values from
      the main loop and passes them via the structure to the chunk
      formatter, and the writes the changed values back into the main loop
      local variables. Unfortunately, this complex dance is full of corner
      cases that aren't handled correctly.
      
      The biggest problem is that it is double handling the information in
      both the main loop and the chunk formatting function, leading to
      inconsistent updates and endless loops where progress is not made.
      
      To fix this, push the struct xfs_bulkstat_agichunk outwards to be
      the primary holder of user buffer information. this removes the
      double handling in the main loop.
      
      Also, pass the last inode processed by the chunk formatter as a
      separate parameter as it purely an output variable and is not
      related to the user buffer consumption cursor.
      
      Finally, the chunk formatting code is not shared by anyone, so make
      it local to xfs_itable.c.
      
      cc: <stable@vger.kernel.org> # 3.17
      Signed-off-by: NDave Chinner <dchinner@redhat.com>
      Reviewed-by: NBrian Foster <bfoster@redhat.com>
      Signed-off-by: NDave Chinner <david@fromorbit.com>
      bf4a5af2
    • D
      xfs: bulkstat btree walk doesn't terminate · afa947cb
      Dave Chinner 提交于
      The bulkstat code has several different ways of detecting the end of
      an AG when doing a walk. They are not consistently detected, and the
      code that checks for the end of AG conditions is not consistently
      coded. Hence the are conditions where the walk code can get stuck in
      an endless loop making no progress and not triggering any
      termination conditions.
      
      Convert all the "tmp/i" status return codes from btree operations
      to a common name (stat) and apply end-of-ag detection to these
      operations consistently.
      
      cc: <stable@vger.kernel.org> # 3.17
      Signed-off-by: NDave Chinner <dchinner@redhat.com>
      Reviewed-by: NBrian Foster <bfoster@redhat.com>
      Signed-off-by: NDave Chinner <david@fromorbit.com>
      afa947cb
    • J
      mm: Fix comment before truncate_setsize() · 77783d06
      Jan Kara 提交于
      XFS doesn't always hold i_mutex when calling truncate_setsize() and it
      uses a different lock to serialize truncates and writes. So fix the
      comment before truncate_setsize().
      Reported-by: NJan Beulich <JBeulich@suse.com>
      Signed-off-by: NJan Kara <jack@suse.cz>
      Signed-off-by: NDave Chinner <david@fromorbit.com>
      77783d06
    • L
      Merge tag 'pci-v3.18-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci · ed78bb84
      Linus Torvalds 提交于
      Pull PCI fix from Bjorn Helgaas:
       "This fixes an oops when enabling SR-IOV VF devices.  The oops is a
        regression I added by configuring all devices during enumeration.
      
          - Don't oops on virtual buses in acpi_pci_get_bridge_handle() (Yinghai Lu)"
      
      * tag 'pci-v3.18-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
        PCI: Don't oops on virtual buses in acpi_pci_get_bridge_handle()
      ed78bb84
    • L
      Merge tag 'sound-3.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound · 3d5a0863
      Linus Torvalds 提交于
      Pull sound fixes from Takashi Iwai:
       "This update contains mostly only fixes for Realtek HD-audio codec
        driver in addition to a long-standing sysfs warning bug fix for
        USB-audio.
      
        One significant fix for Realtek codecs is the update of EAPD init
        codes.  This avoids invalid COEF setups for some codec models and may
        fix "lost sound" in some cases.
      
        The rest are a bit high volume but only new quirks and ALC668-specific
        COEF tables"
      
      * tag 'sound-3.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
        ALSA: hda/realtek - Restore default value for ALC668
        ALSA: usb-audio: Fix device_del() sysfs warnings at disconnect
        ALSA: hda - fix mute led problem for three HP laptops
        ALSA: hda/realtek - Update Initial AMP for EAPD control
        ALSA: hda - change three SSID quirks to one pin quirk
        ALSA: hda - Set GPIO 4 low for a few HP machines
        ALSA: hda - Add ultra dock support for Thinkpad X240.
      3d5a0863
    • L
      Merge tag 'mmc-v3.18-2' of git://git.linaro.org/people/ulf.hansson/mmc · 381e3554
      Linus Torvalds 提交于
      Pull MMC fix from Ulf Hansson:
       "Fix card detection regression in the MMC core.
      
        The MMC_CAP2_CD_ACTIVE_HIGH and MMC_CAP2_RO_ACTIVE_HIGH could under
        some circumstances be set incorrectly, causing the card detection to
        fail"
      
      * tag 'mmc-v3.18-2' of git://git.linaro.org/people/ulf.hansson/mmc:
        mmc: core: fix card detection regression
      381e3554
    • L
      Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs · 087b0198
      Linus Torvalds 提交于
      Pull another filesystem fix from Al Viro:
       "A fix for embarrassing braino in o2net_send_tcp_msg().  -stable
        fodder..."
      
      * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
        fix breakage in o2net_send_tcp_msg()
      087b0198
  4. 06 11月, 2014 8 次提交
  5. 05 11月, 2014 10 次提交
    • M
      Merge remote-tracking branches 'regulator/fix/max1586',... · 2a7509b1
      Mark Brown 提交于
      Merge remote-tracking branches 'regulator/fix/max1586', 'regulator/fix/max77686', 'regulator/fix/max77693', 'regulator/fix/max77802', 'regulator/fix/max8860' and 'regulator/fix/s2mpa01' into regulator-linus
      2a7509b1
    • M
    • T
      ALSA: usb-audio: Fix device_del() sysfs warnings at disconnect · 0725dda2
      Takashi Iwai 提交于
      Some USB-audio devices show weird sysfs warnings at disconnecting the
      devices, e.g.
       usb 1-3: USB disconnect, device number 3
       ------------[ cut here ]------------
       WARNING: CPU: 0 PID: 973 at fs/sysfs/group.c:216 device_del+0x39/0x180()
       sysfs group ffffffff8183df40 not found for kobject 'midiC1D0'
       Call Trace:
        [<ffffffff814a3e38>] ? dump_stack+0x49/0x71
        [<ffffffff8103cb72>] ? warn_slowpath_common+0x82/0xb0
        [<ffffffff8103cc55>] ? warn_slowpath_fmt+0x45/0x50
        [<ffffffff813521e9>] ? device_del+0x39/0x180
        [<ffffffff81352339>] ? device_unregister+0x9/0x20
        [<ffffffff81352384>] ? device_destroy+0x34/0x40
        [<ffffffffa00ba29f>] ? snd_unregister_device+0x7f/0xd0 [snd]
        [<ffffffffa025124e>] ? snd_rawmidi_dev_disconnect+0xce/0x100 [snd_rawmidi]
        [<ffffffffa00c0192>] ? snd_device_disconnect+0x62/0x90 [snd]
        [<ffffffffa00c025c>] ? snd_device_disconnect_all+0x3c/0x60 [snd]
        [<ffffffffa00bb574>] ? snd_card_disconnect+0x124/0x1a0 [snd]
        [<ffffffffa02e54e8>] ? usb_audio_disconnect+0x88/0x1c0 [snd_usb_audio]
        [<ffffffffa015260e>] ? usb_unbind_interface+0x5e/0x1b0 [usbcore]
        [<ffffffff813553e9>] ? __device_release_driver+0x79/0xf0
        [<ffffffff81355485>] ? device_release_driver+0x25/0x40
        [<ffffffff81354e11>] ? bus_remove_device+0xf1/0x130
        [<ffffffff813522b9>] ? device_del+0x109/0x180
        [<ffffffffa01501d5>] ? usb_disable_device+0x95/0x1f0 [usbcore]
        [<ffffffffa014634f>] ? usb_disconnect+0x8f/0x190 [usbcore]
        [<ffffffffa0149179>] ? hub_thread+0x539/0x13a0 [usbcore]
        [<ffffffff810669f5>] ? sched_clock_local+0x15/0x80
        [<ffffffff81066c98>] ? sched_clock_cpu+0xb8/0xd0
        [<ffffffff81070730>] ? bit_waitqueue+0xb0/0xb0
        [<ffffffffa0148c40>] ? usb_port_resume+0x430/0x430 [usbcore]
        [<ffffffffa0148c40>] ? usb_port_resume+0x430/0x430 [usbcore]
        [<ffffffff8105973e>] ? kthread+0xce/0xf0
        [<ffffffff81059670>] ? kthread_create_on_node+0x1c0/0x1c0
        [<ffffffff814a8b7c>] ? ret_from_fork+0x7c/0xb0
        [<ffffffff81059670>] ? kthread_create_on_node+0x1c0/0x1c0
       ---[ end trace 40b1928d1136b91e ]---
      
      This comes from the fact that usb-audio driver may receive the
      disconnect callback multiple times, per each usb interface.  When a
      device has both audio and midi interfaces, it gets called twice, and
      currently the driver tries to release resources at the last call.
      At this point, the first parent interface has been already deleted,
      thus deleting a child of the first parent hits such a warning.
      
      For fixing this problem, we need to call snd_card_disconnect() and
      cancel pending operations at the very first disconnect while the
      release of the whole objects waits until the last disconnect call.
      
      Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=80931Reported-and-tested-by: NTomas Gayoso <tgayoso@gmail.com>
      Reported-and-tested-by: NChris J Arges <chris.j.arges@canonical.com>
      Cc: <stable@vger.kernel.org>
      Signed-off-by: NTakashi Iwai <tiwai@suse.de>
      0725dda2
    • M
      ovl: don't poison cursor · 3f822c62
      Miklos Szeredi 提交于
      ovl_cache_put() can be called from ovl_dir_reset() if the cache needs to be
      rebuilt.  We did list_del() on the cursor, which results in an Oops on the
      poisoned pointer in ovl_seek_cursor().
      Reported-by: NJordi Pujol Palomer <jordipujolp@gmail.com>
      Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>
      Tested-by: NJordi Pujol Palomer <jordipujolp@gmail.com>
      Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
      3f822c62
    • K
      mmc: core: fix card detection regression · a31b0c6c
      Kristina Martsenko 提交于
      Since commit 89168b48 ("mmc: core: restore detect line inversion
      semantics"), the SD card on i.MX28 (and possibly other) devices isn't
      detected and booting stops at:
      
      [    4.120617] Waiting for root device /dev/mmcblk0p3...
      
      This is caused by the MMC_CAP2_CD_ACTIVE_HIGH flag being set incorrectly
      when the host controller doesn't use a GPIO for card detection (but
      instead uses a dedicated pin). In this case mmc_gpiod_request_cd() will
      return before assigning to the gpio_invert variable, leaving the
      variable uninitialized. The variable then gets used to set the flag.
      This patch fixes the issue by making sure gpio_invert is set to false
      when a GPIO isn't used. After this patch, i.MX28 boots fine.
      
      The MMC_CAP2_RO_ACTIVE_HIGH (write protect) flag is also set incorrectly
      for the exact same reason (it uses the same uninitialized variable), so
      this patch fixes that too.
      
      Fixes: 89168b48 ("mmc: core: restore detect line inversion semantics")
      Reported-by: NStefan Wahren <stefan.wahren@i2se.com>
      Signed-off-by: NKristina Martšenko <kristina.martsenko@gmail.com>
      Tested-by: NFabio Estevam <fabio.estevam@freescale.com>
      Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>
      a31b0c6c
    • H
      ALSA: hda - fix mute led problem for three HP laptops · c922c4e8
      Hui Wang 提交于
      Without the fix, the mute led can't work on these three machines.
      
      After apply this fix, these three machines will fall back on the led
      control quirk as below, and through testing, the mute led works very
      well.
      PIN_QUIRK(0x10ec0282, 0x103c, "HP", ALC269_FIXUP_HP_LINE1_MIC1_LED,
                  ALC282_STANDARD_PINS,
                  {0x12, 0x90a60140},
                  ...
      
      BugLink: https://bugs.launchpad.net/bugs/1389497Tested-by: NTieFu Chen <tienfu.chen@canonical.com>
      Cc: Kailang Yang <kailang@realtek.com>
      Cc: stable@vger.kernel.org
      Signed-off-by: NHui Wang <hui.wang@canonical.com>
      Signed-off-by: NTakashi Iwai <tiwai@suse.de>
      c922c4e8
    • L
      Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal · a1cff6e2
      Linus Torvalds 提交于
      Pull thermal fixes from Eduardo Valentin:
       "Specifics:
         - a few code fixes improving the Exynos code base.  They remove dead
           and unreachable code.  No functional changes here
         - in Exynos code base, fixes regarding the right usage of features
           (TRIMINFO and TRIMRELOAD)
         - documentation of RCAR thermal
         - fix in the of-thermal, regarding the proper usage of of-APIs
         - fixes on thermal-core, removal of unreachable code"
      
      [ Eduardo is sending the thermal fixes on behalf of Rui Zhang this time.
        Rui is currently unable to send pull requests due to troubles with his
        machine and he's currently in a business trip ]
      
      * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal:
        Thermal:Remove usless if(!result) before return tz
        thermal: exynos: fix IRQ clearing on TMU initialization
        thermal: fix multiple disbalanced device node counters
        thermal: rcar: Add binding docs for new R-Car Gen2 SoCs
        thermal: exynos: Add support for TRIM_RELOAD feature at Exynos3250
        thermal: exynos: Add support for many TRIMINFO_CTRL registers
        thermal: samsung: Exynos5260 and Exynos5420 should not use TRIM_RELOAD flag
        thermal: exynos: remove identical values from exynos*_tmu_registers structures
        thermal: exynos: remove redundant pdata checks from exynos_tmu_control()
        thermal: exynos: cache non_hw_trigger_levels in pdata
        thermal: exynos: simplify temp_to_code() and code_to_temp()
        thermal: exynos: remove redundant threshold_code checks from exynos_tmu_initialize()
        thermal: exynos: remove redundant pdata checks from exynos_tmu_initialize()
        thermal: exynos: remove dead code for HW_MODE calibration
        thermal: exynos: remove unused struct exynos_tmu_registers entries
      a1cff6e2
    • L
      Merge tag 'platform-drivers-x86-v3.18-2' of... · 9319bc1c
      Linus Torvalds 提交于
      Merge tag 'platform-drivers-x86-v3.18-2' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86
      
      Pull x86 platform drievr updates from Darren Hart:
       "A short list of patches applying quirks and new DMI matches.  These
        pass my basic build tests and have spent 4 days in linux-next"
      
      * tag 'platform-drivers-x86-v3.18-2' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86:
        quirk for Lenovo Yoga 3: no rfkill switch
        acer-wmi: Add acpi_backlight=video quirk for the Acer KAV80
        samsung-laptop: Add broken-acpi-video quirk for NC210/NC110
        asus-nb-wmi: Add wapf4 quirk for the X550VB
        toshiba_acpi: Add Toshiba TECRA A50-A to the alt keymap dmi list
      9319bc1c
    • L
      Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux · 8a97577a
      Linus Torvalds 提交于
      Pull powerpc fixes from Michael Ellerman:
       "Some more powerpc fixes if you please"
      
      * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux:
        powerpc: use device_online/offline() instead of cpu_up/down()
        powerpc/powernv: Properly fix LPC debugfs endianness
        powerpc: do_notify_resume can be called with bad thread_info flags argument
        powerpc/fadump: Fix endianess issues in firmware assisted dump handling
        powerpc: Fix section mismatch warning
      8a97577a
    • L
      Merge tag 'ftracetest-3.18-rc1' of... · 1efa82ec
      Linus Torvalds 提交于
      Merge tag 'ftracetest-3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
      
      Pull ftracetest fix from Steven Rostedt:
       "Running the ftracetests on a machine that had the debugfs file system
        mounted in two locations caused the ftracetests to fail.  This is
        because the ftracetests script does a grep of the /proc/mounts file to
        find where the debugfs file system is mounted.  If it is mounted
        twice, then the grep returns two lines instead of just one.  This
        causes the ftracetests to get confused and fail.
      
        Use "head -1" to only return the first mount point for debugfs"
      
      * tag 'ftracetest-3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
        ftracetest: Take the first debugfs mount found
      1efa82ec
  6. 04 11月, 2014 4 次提交