- 23 4月, 2010 4 次提交
-
-
由 Manuel Jander 提交于
I read a rumor that the AdLink ND6530 USB RS232, RS422 and RS485 isolated adapter is actually a PL2303 based usb serial adapter. I tried it out, and as far as I can tell it works. Signed-off-by: NManuel Jander <manuel.jander@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 William Lightning 提交于
Signed-off-by: NWilliam Lightning <kassah@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Dan Williams 提交于
These phones also have the familiar ttyACM0/ttyUSB0 schizophrenia when placed into "Dial-up Networking" mode after connecting a USB cable. Signed-off-by: NDan Williams <dcbw@redhat.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alex Manoussakis 提交于
The following patch adds support for Multitech Systems' MT9234MU and MT9234ZBA usb dialup fax modems. It is based on a patch and firmware provided to me by Multitech Systems' support, after I reported to them that my MT9234MU modem was not working with recent linux kernels. Signed-off-by: NAlex Manoussakis <alex@juniper.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 30 3月, 2010 1 次提交
-
-
由 Tejun Heo 提交于
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: NTejun Heo <tj@kernel.org> Guess-its-ok-by: NChristoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
-
- 19 3月, 2010 14 次提交
-
-
由 Michael Brunner 提交于
This patch removes a double usb_control_msg that sets the cp210x configuration registers a second time when calling cp210x_set_config. For data sizes >2 the second write gets corrupted. The patch has been created against 2.6.34-rc1, but all cp210x driver revisions are affected. Signed-off-by: NMichael Brunner <mibru@gmx.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alessio Igor Bogani 提交于
The change_speed() function should be serialized against multiple calls. Use the cfg_lock mutex to do this. Signed-off-by: NAlessio Igor Bogani <abogani@texware.it> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 spark 提交于
Signed-off-by: Nspark <spark@bandrich.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Stefan Schmidt 提交于
The module is called qcaux and not moto_modem. Also use help instead of ---help-- to be in sync with the other Kconfig entries. Signed-off-by: NStefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Nathaniel McCallum 提交于
Signed-off-by: NNathaniel McCallum <nathaniel@natemccallum.com> Cc: stable <stable@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Nathaniel McCallum 提交于
Signed-off-by: NNathaniel McCallum <nathaniel@natemccallum.com> Cc: stable <stable@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Nathaniel McCallum 提交于
Signed-off-by: NNathaniel McCallum <nathaniel@natemccallum.com> Cc: stable <stable@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Daniel Sangorrin 提交于
This is a patch to ftdi_sio_ids.h and ftdi_sio.c that adds identifiers for CONTEC USB serial converter. I tested it with the device COM-1(USB)H [akpm@linux-foundation.org: keep the VIDs sorted a bit] Signed-off-by: NDaniel Sangorrin <daniel.sangorrin@gmail.com> Cc: Andreas Mohr <andi@lisas.de> Cc: Radek Liboska <liboska@uochb.cas.cz> Cc: stable <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Bernhard Rosenkraenzer 提交于
This patch adds various USB device IDs for Gobi 2000 devices, as found in the drivers available at https://www.codeaurora.org/wiki/GOBI_ReleasesSigned-off-by: NBernhard Rosenkraenzer <bero@arklinux.org> Cc: stable <stable@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Huang Ying 提交于
I found a DLink DWM 652 U5 USB 3G modem has product ID 0xce1e instead of orignal 0xce16. The new ID is added. And I found there are two entries for 0xce16, one has raw number, the other has symbol DLINK_PRODUCT_DWM_652_U5. This is fixed too. Signed-off-by: NHuang Ying <ying.huang@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Johan Hovold 提交于
It is possible to have a multi-port device with a port lacking an in or out bulk endpoint. Only checking for num_bulk_in or num_bulk_out is thus not sufficient to determine whether a specific port has an in or out bulk endpoint. This fixes potential null pointer dereferences in the generic open and write routines, as well as access to uninitialised fifo in write_room and chars_in_buffer. Also let write fail with ENODEV (instead of 0) on missing out endpoint (also on zero-length writes). Signed-off-by: NJohan Hovold <jhovold@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Johan Hovold 提交于
Make sure usb_serial_port_softint is called on errors also when using multi urb writes. Signed-off-by: NJohan Hovold <jhovold@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Johan Hovold 提交于
Resubmitting read urb fails with -EPERM if completion handler runs while urb is being killed on close. This should not be reported as an error. Signed-off-by: NJohan Hovold <jhovold@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Jason Wessel 提交于
Commit e1108a63 ("usb_serial: Use the shutdown() operation") breaks the ability to use a usb console starting in 2.6.33. This was observed when using console=ttyUSB0,115200 as a boot argument with an FTDI device. The error is: ftdi_sio ttyUSB0: ftdi_submit_read_urb - failed submitting read urb, error -22 The handling of the ASYNCB_INITIALIZED changed in 2.6.32 such that in tty_port_shutdown() it always clears the flag if it is set. The fix is to add a variable to the tty_port struct to indicate when the tty port is a console. CC: Alan Cox <alan@linux.intel.com> CC: Alan Stern <stern@rowland.harvard.edu> CC: Oliver Neukum <oliver@neukum.org> CC: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: NJason Wessel <jason.wessel@windriver.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 03 3月, 2010 21 次提交
-
-
由 Johan Hovold 提交于
URBs are initialised at probe and do not change. Signed-off-by: NJohan Hovold <jhovold@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Johan Hovold 提交于
No need to check ASYNCB_INITIALIZED anymore as commit e1108a63 (usb_serial: Use the shutdown() operation) make sure that there is no longer any call to unthrottle after device specific close (in which the read urb is killed). Signed-off-by: NJohan Hovold <jhovold@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Johan Hovold 提交于
Remove counter that is never exported. Signed-off-by: NJohan Hovold <jhovold@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Dan Williams 提交于
qcaux: add driver for QCDM-capable ports on various devices Many Qualcomm-based devices provide a CDC-ACM port which accepts normal AT commands and PPP connections. But they only provide one which makes status or signal strength requests impossible while PPP is active. They also provide secondary USB interfaces that talk the Qualcomm Diagnostic Monitor (QCDM) protocol which can be used for status and strength. Make those QCDM ports accessible. Signed-off-by: NDan Williams <dcbw@redhat.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 John Tsiombikas 提交于
I've got a trivial patch for the pl2303 driver, that's what I needed to make the wacom serial tablet driver work properly. It uses the TIOCGSERIAL ioctl to determine if it's talking to a serial device or not, which I gather is rather common, but the pl2303 driver didn't implement that ioctl. Here's a patch, I'm not sure it's absolutely correct, I mostly looked at other similar usbserial drivers to see what I must do, but it works for me. Signed-off-by: NJohn Tsiombikas <nuclear@member.fsf.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Dan Williams 提交于
Longcheer is a Chinese company that manufactures the devices which a bunch of different companies like Alcatel, 4G Systems, and Mobidata rebrand. While I can't find Longcheer's USB ID registered anywhere, it's pretty clear the ID is theirs. Signed-off-by: NDan Williams <dcbw@redhat.com> Cc: stable <stable@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Daniel Sangorrin 提交于
This is a patch to ftdi_sio_ids.h and ftdi_sio.c that adds identifiers for CONTEC USB serial converter. I tested it with the device COM-1(USB)H Signed-off-by: NDaniel Sangorrin <daniel.sangorrin@gmail.com> Cc: Andreas Mohr <andi@lisas.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Stern 提交于
This patch (as1344) removes references to port->port.count from the USB serial drivers. Now that serial ports are properly reference counted, port.count checking is unnecessary and incorrect. Drivers should assume that the port is in use from the time the open method runs until the close method is called. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Cox 提交于
We have lots of callers that do not need to do this in the first place. Remove the calls as they both cost CPU and for big buffers can mess up the multi-page allocation avoidance. Signed-off-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Cox 提交于
This driver has its own (surplus) backup queue system which wants removing from the receive overflow logic. Do this at the same time as removing the request_room logic Signed-off-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Elina Pasheva 提交于
A crash has been reported with sierra driver on disconnect with Ubuntu/Lucid distribution based on kernel-2.6.32. The cause of the crash was determined as "NULL tty pointer was being referenced" and the NULL pointer was passed by sierra_indat_callback(). This patch modifies sierra_indat_callback() function to check for NULL tty structure pointer. This modification prevents a crash from happening when the device is disconnected. This patch fixes the bug reported in Launchpad: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/511157Signed-off-by: NElina Pasheva <epasheva@sierrawireless.com> Cc: stable <stable@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Elina Pasheva 提交于
This patch adds a new function to the sierra.c driver, sierra_reset_resume(). This new function completes the suite of Dynamic Power Management commands in the sierra.c driver. Signed-off-by: NElina Pasheva <epasheva@sierrawireless.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de> drivers/usb/serial/sierra.c | 30 ++++++++++++++++++++---------- 1 file changed, 20 insertions(+), 10 deletions(-)
-
由 Alan Cox 提交于
We are now refcounted and all the port.count checking is no longer valid and in fact produces false warnings. Signed-off-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Cox 提交于
As reported in http://bugzilla.kernel.org/show_bug.cgi?id=10980Signed-off-by: NAlan Cox <alan@linux.intel.com> Cc: stable <stable@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Joe Perches 提交于
Reduces string space a bit Neaten a macro redefine of dbg Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Joe Perches 提交于
#define dbg adds the newline, messages shouldn't. Converted dbg("%s", "some string") to dbg("some string") Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Forest Bond 提交于
Add support for USB serial interface provided by ViVOtech ViVOpay devices via new driver vivopay-serial. Currently only the ViVOpay 8800 device is supported, but support for similar devices can be added by adding the appropriate device IDs to the driver. Signed-off-by: NForest Bond <forest.bond@outpostembedded.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Mitchell Solomon 提交于
PID patch for my products Signed-off-by: NMitchell Solomon <mitchjs@rush2112.net> Cc: stable <stable@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alessio Igor Bogani 提交于
As Alan Cox have pinpointed the driver still required protection against parallels calls to the config ioctl(). If lock is still necessary the use of BKL is abused here. So replace BKL with a more convenient mutex. Signed-off-by: NAlessio Igor Bogani <abogani@texware.it> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: Johan Hovold <jhovold@gmail.com> Cc: Alan Cox <alan@linux.intel.com> Cc: Daniel Mack <daniel@caiaq.de> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Mike Dunn 提交于
Add support for the serial port on devices based on the MosChip 7715, which provides a serial and parallel port on a single usb interface. This is added to the existing driver for the Moschip 7720 dual serial port device. The 7715 is very similiar to the 7720, requiring only the addition of a calc_num_ports() function, a separate interrupt-in endpoint callback, and some manipulation of the port pointers added to the attach() function to correct the fact that the usbserial core erroneously assigns the first bulk in/out endpoint pair to the serial port (the 7715 uses these for its parallel port). There is no support for the 7715's parallel port yet. Signed-off-by: NMike Dunn <mikedunn@newsguy.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Dan Carpenter 提交于
Johan Hovold points out that get_string() is basically just a re-implimentation of usb_string(). It is also buggy. It does DMA on the stack and it doesn't handle negative returns from usb_get_descriptor(). Plus unicode_to_ascii() is a rubbish function and moving to usb_string() avoids using it. Let's eliminate get_string() entirely. Reported-by: NJohan Hovold <jhovold@gmail.com> Signed-off-by: NDan Carpenter <error27@gmail.com> Acked-by: NJohan Hovold <jhovold@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-