CS4281 driver
Reset the FPDN bit of the EPPMC register if needed.
Signed-off-by: NArnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

EMU10K1/EMU10K2 driver
Signed-off-by: NJames Courtier-Dutton <James@superbug.co.uk>

EMU10K1/EMU10K2 driver
e.g. When HD Capture source is set to SPDIF,
     setting HD Capture channel to 0 captures from CDROM digital input.
     setting HD Capture channel to 1 captures from SPDIF in.
Signed-off-by: NJames Courtier-Dutton <James@superbug.co.uk>

EMU10K1/EMU10K2 driver
The capture rate does in fact vary, but it only captures anything if
the HD Capture source is set to I2S or AC97. I have not tested if the sound
is actually captured from an physical input of some type or not.
TODO: Get SPDIF capture working.
Signed-off-by: NJames Courtier-Dutton <James@superbug.co.uk>

EMU10K1/EMU10K2 driver
Signed-off-by: NJames Courtier-Dutton <James@superbug.co.uk>

USB generic driver
The SB Audigy 2 NX does not advertise the sample rate attribute in its
endpoint descriptors although it supports it.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

USB generic driver
Adds mixer controls for the CMSS/Dolby Digital/Power LEDs
on the SB Audigy 2 NX.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

USB generic driver
Add ioctls to the Sound Blaster remote control hwdep device so that it
can be used with LIRC.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

USB generic driver
Do not use more than one packet in synchronization feedback URBs because
it would be pointless to send or receive more than one value at the same
time.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

USB generic driver
Add sanity checks when reading the bRefresh value, and actually use it
for the synchronization packets instead of polling at 1000 Hz.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

USB generic driver
Extension units can have type 0, so do not ignore them when constructing
mixer controls.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

USB generic driver
Cache the decoded values of idVendor/idProduct to get rid of most of
those ugly le16_to_cpu() calls.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

ALSA Core,USB generic driver
Add an hwdep interface that supports reading remote control data from
Sound Blaster Extigy and Audigy 2 NX devices.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

USB generic driver
Add support for the optional status interrupt endpoint in audio control
interfaces, and translate USB status notifications into ALSA mixer
control notifications.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

USB generic driver
Move all data related to audio control interfaces into a separate struct
local to usbmixer.c.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

USB generic driver
Unit/terminal IDs are 8-bit integers, so the unitbitmap
variable does not need to be bigger than 256 bits.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

USB generic driver
On the SB Audigy 2 NX, frequency feedback doesn't quite work
when playing at 44.1 kHz, so temporarily disable this frequency.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

ALSA Version
1.0.9rc3
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

RME HDSP driver
ppc firmware upload fix
Signed-off-by: NThomas Charbonnel <thomas@undata.org>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

AC97 Codec
Add the 'Mic Front Input Switch' control to the mixer for ALC850.
Enabling this input is required for using the front panel microphone
connector with ASUS A8V motherboard.
Signed-off-by: NSergey Vlasov <vsu@altlinux.ru>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

AC97 Codec
ac97_enum mixer elements (e.g., 'Capture Source') did not work because
of wrong bitmask calculation in snd_ac97_get_enum_double() and
snd_ac97_put_enum_double().

https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1072Signed-off-by: NSergey Vlasov <vsu@altlinux.ru>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

USB generic driver,USB USX2Y
This patch removes the superfluous driver parameter from the
disconnect functions.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

USB generic driver
Add a mechanism to specify source names of selector units,
and add such names for the SB Audigy 2 NX.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

USB generic driver
In the streamX proc file, show the exact number of samples per
USB frame as 16.16 hexadecimal floating point value.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

USB generic driver
Add a mixer control map for the SB Audigy 2 NX so
that we get meaningful mixer control names.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

VIA82xx driver
Report by Ronny V. Vindenes <s864@ii.uib.no>
Add dxs_support=5 for MSI K8T Neo-FIS2R.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

HDA Codec driver
Fix and cleanup of CM9880 automatic PIN configuration.
snd_hda_codec_setup_stream() doesn't do anything when NID is 0.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

HDA generic driver
Show the jack type of each PIN default configuration entry.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

HDA generic driver
Fix a typo in comments.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

USB generic driver,USB USX2Y
Without this patch, some usb kobjects, which are parents to
the usx2y's kobjects can be freed before the usx2y's.
This led to an oops in get_kobj_path_length() and a dead
keyboard, when the usx2y's kobjects were freed.
The patch ensures the correct sequence.
Tested ok on kernel 2.6.12-rc2.
Signed-off-by: NKarsten Wiese <annabellesgarden@yahoo.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

EMU10K1/EMU10K2 driver
When building with gcc -W sound/pci/emu10k1/emupcm.c produces this little
warning in 2.6.12-rc2-mm3 :
  sound/pci/emu10k1/emupcm.c:265: warning: 'inline' is not at beginning of
declaration
No big deal, but trivial to fix.
Signed-off-by: NJesper Juhl <juhl-lkml@dif.dk>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

VIA82xx driver
Added dxs_support=5 entry for Insight P4-ITX.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

ALSA Core
Increase the timer protocl number (to distinguish the fix for TREAD ioctls).
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

HDA Codec driver
Misc clean up: move the definitions of constants for pinctl to a single place.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

HDA Codec driver
Removed the dead (duplicated) code.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

HDA Codec driver
Added the support of AD1981HD and AD1983 codecs.
Including the fix for AD1986A.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

HDA generic driver,HDA Codec driver
Add initial SigmaTel codec support for 9200 and 922x. Note that
this hda patch relies on the configuration default registers to
be set correctly (normally by BIOS/firmware) in order for it to
set up pin widgets properly. There's a test switch in the patch
so it will work with the SigmaTel reference boards that are usually
plugged into a system that doesn't set the configuration default
registers. It supports 2 channel analog out and line/mic in. I
plan to add >2 channel support and spdif support shortly.
Please apply.
Signed-off-by: NMatt <matt@embeddedalley.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

HDA Codec driver,HDA generic driver
Fix some vref defines so they are valid for the different bits in
the pin cap and pin control registers. Please apply.
Signed-off-by: NMatt <matt@embeddedalley.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

AC97 Codec
The handling of shared surround/clfe output jacks with line/mic-in
on some AC97 codecs is improved.

Instead of 'Line-In As Surround' or 'Mic As Center/LFE' switch, two
new enum controls are introduced: 'Channel Mode' and 'Surround Jack Mode'.
The formar changes the current output mode among 2, 4 and 6-channels.
The latter controls whether the jacks are shared or independent.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

ALSA Core
Signed-off-by: NJaroslav Kysela <perex@suse.cz>