Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Adding the USB ID for my TerraTec Electronic GmbH Cinergy T RC MKII
[0ccd:0097] and hooking it up into af9015, on top of your new NXP TDA18218
patches, makes it work for me.

Just the shipped IR remote control doesn't seem to create keycode events
yet (tested with different remote=%d parameters), are there any hints to
add support for that?

[    2.250022] usb 1-10: new high speed USB device using ehci_hcd and address 5
[    2.369287] usb 1-10: New USB device found, idVendor=0ccd, idProduct=0097
[    2.369290] usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.369293] usb 1-10: Product: USB2.0 DVB-T TV Stick
[    2.369294] usb 1-10: Manufacturer: NEWMI
[    2.369296] usb 1-10: SerialNumber: 010101010600001
[    2.534023] usbcore: registered new interface driver hiddev
[    2.537235] input: NEWMI USB2.0 DVB-T TV Stick as /devices/pci0000:00/0000:00:02.1/usb1/1-10/1-10:1.1/input/input0
[    2.537323] generic-usb 0003:0CCD:0097.0001: input,hidraw0: USB HID v1.01 Keyboard [NEWMI USB2.0 DVB-T TV Stick] on usb-0000:00:02.1-10/input1
[    2.537349] usbcore: registered new interface driver usbhid
[    2.537351] usbhid: USB HID core driver
[    3.263177] generic-usb 0003:04D9:1603.0002: input,hidraw1: USB HID v1.10 Keyboard [  USB Keyboard] on usb-0000:00:02.0-8.1/input0
[    3.286946] generic-usb 0003:04D9:1603.0003: input,hidraw2: USB HID v1.10 Device [  USB Keyboard] on usb-0000:00:02.0-8.1/input1
[    3.467136] generic-usb 0003:046D:C050.0004: input,hidraw3: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:02.0-8.2/input0
[    3.660890] generic-usb 0003:10D5:000D.0005: input,hidraw4: USB HID v1.10 Keyboard [No brand SP02-A1] on usb-0000:00:02.0-8.3/input0
[    5.567632] dvb-usb: found a 'TerraTec Cinergy T Stick RC' in cold state, will try to load a firmware
[    5.693497] dvb-usb: downloading firmware from file 'dvb-usb-af9015.fw'
[    5.773109] dvb-usb: found a 'TerraTec Cinergy T Stick RC' in warm state.
[    5.773168] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[    5.774290] DVB: registering new adapter (TerraTec Cinergy T Stick RC)
[    6.007696] af9013: firmware version:5.1.0
[    6.010843] DVB: registering adapter 0 frontend 0 (Afatech AF9013 DVB-T)...
[    6.032697] tda18218: NXP TDA18218HN successfully identified.
[    6.034442] dvb-usb: TerraTec Cinergy T Stick RC successfully initialized and connected.
[    6.040612] usbcore: registered new interface driver dvb_usb_af9015

[mchehab@redhat.com: Fix merge conflict with another board addition]
Signed-off-by: NStefan Lippers-Hollmann <s.l-h@gmx.de>
Acked-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This is a big patch, yet trivial. It just move the RC properties
to a separate struct, in order to prepare the dvb-usb drivers to
use rc-core. There's no change on the behavior of the drivers.

With this change, it is possible to have both legacy and rc-core
based code inside the dvb-usb-remote, allowing a gradual migration
to rc-core, driver per driver.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

dvb-usb has its own IR handle code. Now that we have a Remote
Controller subsystem, we should start using it. So, remove this
struct, in favor of the similar struct defined at the RC subsystem.

This is a big, but trivial patch. It is a 3 line delect, plus
lots of rename on several dvb-usb files.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add USB ID 07ca:815a for AverMedia AVerTV Volar M (A815Mac).
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Several DVB drivers use a different name convention. As we're moving
the keytables, we need to use the same convention on all places.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add USB ID 1b80:e39a for KWorld TV Stick II (395UR).
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add USB ID 1b80:e383 for KWorld USB DVB-T Stick Mobile (UB383-T).
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h

percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: NTejun Heo <tj@kernel.org>
Guess-its-ok-by: NChristoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>

There is no driver for new NXP TDA18218	tuner which is used by few recent
af9015 designs. af9015 uses number 179 as ID for that tuner. Inform this
tuner is not supported when device using that tuner is meet.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Autodetect MYGICTV U718 from eeprom hash and select remote automatically.
Remove old iManufacturer string compare based remote selection logic.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Autodetect A-Link DTU(m) based eeprom hash and select correct remote.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add USB ID 0413:6a04 for Leadtek WinFast DTV2000DS.

Thanks to Gavin Ramm <gavin_ramm@hotmail.com> for reporting this.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add USB ID 1b80:e402 for DigitalNow TinyTwin version 2.

Thanks to Trevor Phillips <trevor.phillips@gmail.com> for reporting this.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

So as a final patch, add support for hash and one hash entry
for MSI digi vox mini II:
iManufacturer 1 Afatech
iProduct      2 DVB-T 2
iSerial       3 010101010600001

It is now handled with proper IR and key map tables.
Signed-off-by: NJiri Slaby <jslaby@suse.cz>
Acked-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add af9015_setup structure to hold (right now only remote) setup
of distinct receivers.

Add af9015_setup_match for matching ids against tables.

This is for easier matching different kind of ids against tables
to obtain setups. Currently module parameters and usb vendor ids
are switched into and matched against tables. Hashes will follow.
Signed-off-by: NJiri Slaby <jslaby@suse.cz>
Acked-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This is just a code shuffle without functional changes. For easier
review of later changes, i.e. preparation.
Signed-off-by: NJiri Slaby <jslaby@suse.cz>
Acked-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This will be useful for matching of IR tables later.

We read the eeprom anyway for dumping. Switch the dumping to
print_hex_dump_bytes and compute hash above that by
hash = 0;
for (u32 VAL) in (eeprom):
  hash *= GOLDEN_RATIO_PRIME_32
  hash += VAL; // while preserving endinaness

The computation is moved earlier to the flow, namely from
af9015_af9013_frontend_attach to af9015_read_config, so that
we can access the sum in af9015_read_config already.
Signed-off-by: NJiri Slaby <jslaby@suse.cz>
Acked-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add USB ID 1b80:e39d for Sveon STV20 Tuner USB DVB-T HDTV.
Signed-off-by: NIgnacio de Miguel Diaz <imigueldiaz@gmail.com>
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Looks like eeprom IR mode byte value 0x04 means there is remote
which should be polled. Patch enables polling also in case of 0x04.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Support for MSI DIGIVOX mini III remote.
Thanks to Aleksandr V. Piskunov <aleksandr.v.piskunov@gmail.com>
Thanks to Roman <lists@hasnoname.de>

Cc: Aleksandr V. Piskunov <aleksandr.v.piskunov@gmail.com>
Cc: Roman <lists@hasnoname.de>
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add USB ID 1b80:c161 for KWorld PlusTV DVB-T PCI Pro Card (DVB-T PC160-T).
Thanks to Andrew Cruickshank <atcrank@gmail.com> for reporting this.

Cc: Andrew Cruickshank <atcrank@gmail.com>
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

And mask should be 0xff00 instead of 0xae00.

Thanks to Jochen Friedrich <jochen@scram.de> for pointing this.

Cc: Jochen Friedrich <jochen@scram.de>
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

* define names for few values
* decrease buffer len by one byte which was not used
* add check for buffer overflow for sure
* indentation fixes
* remove useless 0 len check from memcpy
It should not happen and if it happens memcpy should not do anything.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Fix wrongly configured USB1.1 TS EP.

Patch serie also increases USB URB size to reduce wakeups.
USB1.1 URB size from 64 to 940 bytes
USB2.0 URB size from 512 to 16356 bytes
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Fix wrongly configured USB2.0 TS EP.
Signed-off-by: NJose Alberto Reguero <jareguero@telefonica.net>
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

In order to be closer to V4L IR implementation, it is needed to replace
	u8 custom, data
to:
	u16 scan

This allows using non-rc5 mappings, like the 8 bit keycodes used on older
protocols. It will also allow future implementations of rc6 keystrokes
when needed.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add new USB ID (1b80:e400) for KWorld PlusTV Dual DVB-T Stick (DVB-T 399U).
The model number on the devices sticker label is "KW-DVB-T 399UR".
Signed-off-by: NMart Raudsepp <mart.raudsepp@artecdesign.ee>
Acked-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Replace printing to magically sized temporary buffer with use
of KERN_CONT for continual printing of eeprom registers dump.

Since deb_info is defined as dprintk, which is conditionally defined
to printk without additional parameters, meaning that deb_info is equivalent
to direct printk (without adding KERN_ facility), we can use KERN_DEBUG and
KERN_CONT in there, eliminating the need for sprintf into temporary buffer
with not easily readable/magical size.

Though it's strange, that deb_info definition uses printk without KERN_
facility and callers don't use it either.
Signed-off-by: NJan Nikitenko <jan.nikitenko@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Moving BOOT fixes problem.
Signed-off-by: NNils Kassube <kassube@gmx.net>
Acked-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NDouglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This patch fixes stack corruption bug present in af9015_eeprom_dump():
the buffer buf is one byte smaller than required - there is 4 chars
for address prefix, 16*3 chars for dump of 16 eeprom bytes per line
and 1 byte for zero ending the string required, i.e. 53 bytes, but
only 52 are provided.
The one byte missing in stack based buffer buf causes following oops
on MIPS little endian platform, because i2c_adap pointer in
af9015_af9013_frontend_attach() is corrupted by inlined function
af9015_eeprom_dump():

CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc ==
803a4488, ra == c049a1c8
Oops[#1]:
Cpu 0
$ 0   : 00000000 10003c00 00000000 803a4468
$ 4   : 8f17c600 8f067b30 00000002 00000038
$ 8   : 00000001 8faf3e98 11da000d 09010002
$12   : 00000000 00000000 00000000 0000000a
$16   : 8f17c600 8f067b68 8faf3c00 8f067c04
$20   : 8f067b9c 00000100 8f067bf0 80104100
$24   : 00000000 2aba9fb0
$28   : 8f066000 8f067af0 802cbc48 c049a1c8
Hi    : 00000000
Lo    : 00000000
epc   : 803a4488 i2c_transfer+0x20/0x104
   Not tainted
ra    : c049a1c8 af9013_read_reg+0x78/0xc4 [af9013]
Status: 10003c03    KERNEL EXL IE
Cause : 00808008
BadVA : 00000000
PrId  : 03030200 (Au1550)
Modules linked in: af9013 dvb_usb_af9015(+) dvb_usb dvb_core firmware_class
i2c_au1550 au1550_spi
Process modprobe (pid: 2757, threadinfo=8f066000, task=8fade098, tls=2aad6470)
Stack : c049f5e0 80163090 805ba880 00000100 8f067bf0 0000d733 8f067b68 8faf3c00
       8f067c04 c049a1c8 80163bc0 8056a630 8f067b40 80163224 80569fc8 8f0033d7
       00000038 80140003 8f067b2c 00010038 c0420001 8f067b28 c049f5e0 00000004
       00000004 c049a524 c049d5a8 c049d5a8 00000000 803a6700 00000000 8f17c600
       c042a7a4 8f17c600 c042a7a4 c049c924 00000000 00000000 00000002 613a6c00
       ...
Call Trace:
[<803a4488>] i2c_transfer+0x20/0x104
[<c049a1c8>] af9013_read_reg+0x78/0xc4 [af9013]
[<c049a524>] af9013_read_reg_bits+0x2c/0x70 [af9013]
[<c049c924>] af9013_attach+0x98/0x65c [af9013]
[<c04257bc>] af9015_af9013_frontend_attach+0x214/0x67c [dvb_usb_af9015]
[<c03e2428>] dvb_usb_adapter_frontend_init+0x20/0x12c [dvb_usb]
[<c03e1ad8>] dvb_usb_device_init+0x374/0x6b0 [dvb_usb]
[<c0426120>] af9015_usb_probe+0x4fc/0xfcc [dvb_usb_af9015]
[<80381024>] usb_probe_interface+0xbc/0x218
[<803227fc>] driver_probe_device+0x12c/0x30c
[<80322a80>] __driver_attach+0xa4/0xac
[<80321ed0>] bus_for_each_dev+0x60/0xd0
[<8032162c>] bus_add_driver+0x1e8/0x2a8
[<80322cdc>] driver_register+0x7c/0x17c
[<80380d30>] usb_register_driver+0xa0/0x12c
[<c042e030>] af9015_usb_module_init+0x30/0x6c [dvb_usb_af9015]
[<8010d2a4>] __kprobes_text_end+0x3c/0x1f4
[<80167150>] sys_init_module+0xb8/0x1cc
[<80102370>] stack_done+0x20/0x3c

Code: afb10018  7000003f  00808021 <8c430000> 7000003f  1060002d  00c09021
8f830014  3c02efff
Signed-off-by: NJan Nikitenko <jan.nikitenko@gmail.com>
Acked-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add USB ID (0458:4012) for Genius TVGo DVB-T03.
Thanks to Petr Vodicka <vodicka.petr@email.cz> for reporting and testing.
Tested-by: NPetr Vodicka <vodicka.petr@email.cz>
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add USB ID (1b80:c810) for Kworld MC810.
Signed-off-by: NWen-chien Jesse Sung <jesse@cola.voip.idv.tw>
Acked-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add USB ID (1b80:e397) for Conceptronic USB2.0 DVB-T CTVDIGRCU V3.0.
Signed-off-by: NMarcel Jueling <Marcel@Jueling.de>
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add USB ID (07ca:a805) for AverMedia AVerTV Volar GPS 805 (A805).
Thanks to Chris Brown <chrisneilbrown@gmail.com> for reporting and
testing.
Tested-by: NChris Brown <chrisneilbrown@gmail.com>
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add 3rd	dvb_usb_device_properties entry for upcoming USB IDs because
current entries are full.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Patch to provide basic support for DigitalNow TinyTwin Remote. It uses
same remote as TwinHan AzureWave AD-TU700(704J).
Signed-off-by: NStuart Hall <mailing-lists@enginuities.com>
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add USB ID (07ca:850a) and configuration hack for AverMedia AVerTV Volar
Black HD (A850) DVB-T USB stick.
Tested-by: NOlivier MENUEL <omenuel@laposte.net>
Tested-by: NThomas Renard <threnard@gmail.com>
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>