- 14 9月, 2008 3 次提交
-
-
由 Lennert Buytenhek 提交于
By moving DMA unmapping during transmit reclaim back under the netif tx lock, we avoid the situation where we read the DMA address and buffer length from the descriptor under the lock and then not do anything with that data after dropping the lock on platforms where the DMA unmapping routines are all NOPs (which is the case on all ARM platforms that mv643xx_eth is used on at least). This saves two uncached reads, which makes a small but measurable performance difference in routing benchmarks. Signed-off-by: NLennert Buytenhek <buytenh@marvell.com>
-
由 Lennert Buytenhek 提交于
Since our ->hard_start_xmit() method is already called under spinlock protection (the netif tx queue lock), we can simply make that lock cover the private transmit state (descriptor ring indexes et al.) as well, which avoids having to use a private lock to protect that state. Since this was the last user of the driver-private spinlock, it can be killed off. Signed-off-by: NLennert Buytenhek <buytenh@marvell.com>
-
由 Lennert Buytenhek 提交于
Move link status handling, transmit reclaim and TX_END handling from the interrupt handler to the napi poll handler. This allows switching ->lock over to a non-IRQ-safe lock and removes all explicit interrupt disabling from the driver. Signed-off-by: NLennert Buytenhek <buytenh@marvell.com>
-
- 05 9月, 2008 15 次提交
-
-
由 Lennert Buytenhek 提交于
As all the infrastructure for multiple transmit queues already exists in the driver, this patch is entirely trivial. The individual transmit queues are still serialised by the driver's per-port private spinlock, but that will disappear (i.e. be replaced by the per-subqueue ->_xmit_lock) in a subsequent patch. Signed-off-by: NLennert Buytenhek <buytenh@marvell.com>
-
由 Lennert Buytenhek 提交于
Delete a couple of unused and uninteresting interrupt source mask bits: - The receive resource underrun interrupt sources are uninteresting because if we are in out-of-memory mode, we are already dealing with the issue, and we don't need the hardware to remind us again that we are out of memory. - The LINK and PHY interrupt sources can be coalesced into one define, since we always use them together. - The transmit resource underrun interrupt source can be disabled since we never activate the head descriptor of a paged skb until the fragments are all activated, so transmit underrun during a packet should never happen. - The INT_EXT_TX_0 define is never used. Signed-off-by: NLennert Buytenhek <buytenh@marvell.com>
-
由 Lennert Buytenhek 提交于
There is no need to call netif_{stop,wake}_queue() when the link goes down/up, as the networking already takes care of this internally. Signed-off-by: NLennert Buytenhek <buytenh@marvell.com>
-
由 Lennert Buytenhek 提交于
Currently, there are two different fields in the mv643xx_eth_platform_data struct that together describe the PHY address -- one field (phy_addr) has the address of the PHY, but if that address is zero, a second field (force_phy_addr) needs to be set to distinguish the actual address zero from a zero due to not having filled in the PHY address explicitly (which should mean 'use the default PHY address'). If we are a bit smarter about the encoding of the phy_addr field, we can avoid the need for a second field -- this patch does that. Signed-off-by: NLennert Buytenhek <buytenh@marvell.com>
-
由 Lennert Buytenhek 提交于
Which top-level unit's SMI interface to use should be a property of the top-level unit, not of the individual ports. This patch moves the ->shared_smi pointer from the per-port platform data to the global platform data. Signed-off-by: NLennert Buytenhek <buytenh@marvell.com>
-
由 Lennert Buytenhek 提交于
Simplify receive and transmit queue handling by requiring the set of queue numbers to be contiguous starting from zero. Signed-off-by: NLennert Buytenhek <buytenh@marvell.com>
-
由 Lennert Buytenhek 提交于
Get rid of the mv643xx_eth-internal MV643XX_ETH_CHECKSUM_OFFLOAD_TX compile-time option. Using transmit checksumming is the sane default, and anyone wanting to disable it should use ethtool(8) instead of recompiling their kernels. Signed-off-by: NLennert Buytenhek <buytenh@marvell.com>
-
由 Lennert Buytenhek 提交于
By having the receive out-of-memory handling timer schedule the napi poll handler and then doing oom processing from the napi poll handler, all code that touches receive state moves to napi context, letting us get rid of all explicit locking in the receive paths since the only mutual exclusion we need anymore at that point is protection against reentering ourselves, which is provided by napi synchronisation. Signed-off-by: NLennert Buytenhek <buytenh@marvell.com>
-
由 Lennert Buytenhek 提交于
Make napi unconditional on the receive side, so that we can get rid of all the locking and local interrupt disabling in the receive path. Signed-off-by: NLennert Buytenhek <buytenh@marvell.com>
-
由 Lennert Buytenhek 提交于
If the platform code has passed us the IRQ number of the mv643xx_eth top-level error interrupt, use the error interrupt to wait for SMI access completion instead of polling the SMI busy bit, since SMI bus accesses can take up to tens of milliseconds. Signed-off-by: NLennert Buytenhek <buytenh@marvell.com>
-
由 Lennert Buytenhek 提交于
Since commit 81600eea ("mv643xx_eth: use auto phy polling for configuring (R)(G)MII interface"), mv643xx_eth no longer does SMI accesses from interrupt context. The only other callers that do SMI accesses all do them from process context, which means we can switch the PHY lock from a spinlock to a mutex, and get rid of the extra locking in some ethtool methods. Signed-off-by: NLennert Buytenhek <buytenh@marvell.com>
-
由 Lennert Buytenhek 提交于
Get rid of the modulo operations that are currently used for computing successive TX/RX descriptor ring indexes. Signed-off-by: NLennert Buytenhek <buytenh@marvell.com>
-
由 Lennert Buytenhek 提交于
Using IRQF_SAMPLE_RANDOM for the mv643xx_eth interrupt handler significantly increases interrupt processing overhead, so get rid of it. Signed-off-by: NLennert Buytenhek <buytenh@marvell.com>
-
由 Lennert Buytenhek 提交于
When tearing down a DMA mapping for a receive buffer, we should pass dma_unmap_single() the exact same address that dma_map_single() gave us when we originally set up the mapping. Signed-off-by: NLennert Buytenhek <buytenh@marvell.com>
-
由 Lennert Buytenhek 提交于
Signed-off-by: NLennert Buytenhek <buytenh@marvell.com>
-
- 29 8月, 2008 9 次提交
-
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 5226/1: remove unmatched comment end. [ARM] Skip memory holes in FLATMEM when reading /proc/pagetypeinfo [ARM] use bcd2bin/bin2bcd [ARM] use the new byteorder headers [ARM] OMAP: Fix 2430 SMC91x ethernet IRQ [ARM] OMAP: Add and update OMAP default configuration files [ARM] OMAP: Change mailing list for OMAP in MAINTAINERS [ARM] S3C2443: Fix the S3C2443 clock register definitions [ARM] JIVE: Fix the spi bus numbering [ARM] S3C24XX: pwm.c: stop debugging output [ARM] S3C24XX: Fix sparse warnings in pwm.c [ARM] S3C24XX: Fix spare errors in pwm-clock driver [ARM] S3C24XX: Fix sparse warnings in arch/arm/plat-s3c24xx/gpiolib.c [ARM] S3C24XX: Fix nor-simtec driver sparse errors [ARM] 5225/1: zaurus: Register I2C controller for audio codecs [ARM] orion5x: update defconfig to v2.6.27-rc4 [ARM] Orion: register UART1 on QNAP TS-209 and TS-409 [ARM] Orion: activate lm75 driver on DNS-323 [ARM] Orion: fix MAC detection on QNAP TS-209 and TS-409 [ARM] Orion: Fix boot crash on Kurobox Pro
-
git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6: Blackfin arch: Fix PM building on BF52x: No ROTWE on BF52x, add USBWE Blackfin arch: sram: use 'unsigned long' for irqflags Blackfin arch: let PCI depend on BROKEN Blackfin arch: move include/asm-blackfin header files to arch/blackfin Blackfin arch: fix bug - MPU crashes under stress Blackfin arch: Fix bug - when to rmmod the L1_module, it stucks and then reboot the board. Blackfin arch: dont actually need to muck with EMAC_SYSTAT for BF52x for demuxing Blackfin arch: Add MTD Partitions for MTD_DATAFLASH, increase max SPI SCLK
-
由 Linus Torvalds 提交于
Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: exit signals: use of uninitialized field notify_count lockdep: fix invalid list_del_rcu in zap_class lockstat: repair erronous contention statistics lockstat: fix numerical output rounding error
-
由 Linus Torvalds 提交于
Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: sched: rt-bandwidth accounting fix sched: fix sched_rt_rq_enqueue() resched idle
-
由 Linus Torvalds 提交于
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: update defconfigs x86: msr: fix bogus return values from rdmsr_safe/wrmsr_safe x86: cpuid: correct return value on partial operations x86: msr: correct return value on partial operations x86: cpuid: propagate error from smp_call_function_single() x86: msr: propagate errors from smp_call_function_single() smp: have smp_call_function_single() detect invalid CPUs
-
git://jdelvare.pck.nerim.net/jdelvare-2.6由 Linus Torvalds 提交于
* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: i2c: Prevent log spam on some DVB adapters i2c: Add missing kerneldoc descriptions i2c: Fix device_init_wakeup place
-
由 Rafael J. Wysocki 提交于
In accordance with commit f42ac38c ("ftrace: disable tracing for suspend to ram"), disable tracing around the suspend code in hibernation code paths. Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Acked-by: NSteven Rostedt <srostedt@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jean-Christophe DUBOIS 提交于
remove unmatched comment end. Signed-off-by: NJean-Christophe DUBOIS <jcd@tribudubois.net> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 28 8月, 2008 13 次提交
-
-
由 Peter Zijlstra 提交于
It fixes an accounting bug where we would continue accumulating runtime even though the bandwidth control is disabled. This would lead to very long throttle periods once bandwidth control gets turned on again. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Michael Hennerich 提交于
Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com> Signed-off-by: NBryan Wu <cooloney@kernel.org>
-
由 Vegard Nossum 提交于
Using just 'unsigned' will make flags an unsigned int. While this is arguably not an error on blackfin where sizeof(int) == sizeof(long), the patch is still justified on the grounds of principle. The patch was generated using the Coccinelle semantic patch framework. Cc: Julia Lawall <julia@diku.dk> Cc: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NVegard Nossum <vegard.nossum@gmail.com> Signed-off-by: NMike Frysinger <vapier.adi@gmail.com> Signed-off-by: NBryan Wu <cooloney@kernel.org>
-
由 John Blackwood 提交于
When sysctl_sched_rt_runtime is set to something other than -1 and the CONFIG_RT_GROUP_SCHED kernel parameter is NOT enabled, we get into a state where we see one or more CPUs idling forvever even though there are real-time tasks in their rt runqueue that are able to run (no longer throttled). The sequence is: - A real-time task is running when the timer sets the rt runqueue to throttled, and the rt task is resched_task()ed and switched out, and idle is switched in since there are no non-rt tasks to run on that cpu. - Eventually the do_sched_rt_period_timer() runs and un-throttles the rt runqueue, but we just exit the timer interrupt and go back to executing the idle task in the idle loop forever. If we change the sched_rt_rq_enqueue() routine to use some of the code from the CONFIG_RT_GROUP_SCHED enabled version of this same routine and resched_task() the currently executing task (idle in our case) if it is a lower priority task than the higher rt task in the now un-throttled runqueue, the problem is no longer observed. Signed-off-by: NJohn Blackwood <john.blackwood@ccur.com> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Jean Delvare 提交于
Some DVB adapters do not support the special I2C transaction that we use for probing purposes. There's no point in logging this event, as there's nothing the user can do and in general there is no actual problem. So, degrade one of these messages to a debug message, and move the other one around so that it is only printed on bogus drivers. Signed-off-by: NJean Delvare <khali@linux-fr.org> Acked-by: NUwe Bugla <uwe.bugla@gmx.de>
-
由 Jean Delvare 提交于
Add missing kernel descriptions of struct i2c_driver members. Signed-off-by: NJean Delvare <khali@linux-fr.org> Acked-by: NRandy Dunlap <rdunlap@xenotime.net> Cc: David Brownell <david-b@pacbell.net>
-
由 Marc Pignat 提交于
device_init_wakeup must be called after device_register. Signed-off-by: NMarc Pignat <marc.pignat@hevs.ch> Acked-by: NDavid Brownell <david-b@pacbell.net> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (55 commits) sctp: fix random memory dereference with SCTP_HMAC_IDENT option. sctp: correct bounds check in sctp_setsockopt_auth_key wan: Missing capability checks in sbni_ioctl() e100, fix iomap read qeth: preallocated header account offset qeth: l2 write unicast list to hardware qeth: use -EOPNOTSUPP instead of -ENOTSUPP. ibm_newemac: Don't call dev_mc_add() before device is registered net: don't grab a mutex within a timer context in gianfar forcedeth: fix checksum flag net/usb/mcs7830: add set_mac_address net/usb/mcs7830: new device IDs [netdrvr] smc91x: fix resource removal (null ptr deref) ibmveth: fix bad UDP checksums [netdrvr] hso: dev_kfree_skb crash fix [netdrvr] hso: icon 322 detection fix atl1: disable TSO by default atl1e: multistatement if missing braces igb: remove 82576 quad adapter drivers/net/skfp/ess.c: fix compile warnings ...
-
由 Vlad Yasevich 提交于
The number of identifiers needs to be checked against the option length. Also, the identifier index provided needs to be verified to make sure that it doesn't exceed the bounds of the array. Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vlad Yasevich 提交于
The bonds check to prevent buffer overlflow was not exactly right. It still allowed overflow of up to 8 bytes which is sizeof(struct sctp_authkey). Since optlen is already checked against the size of that struct, we are guaranteed not to cause interger overflow either. Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Russell King 提交于
-
由 Vladimir Sokolovsky 提交于
Initialize the L_Key and R_Key for memory regions returned from mlx4_ib_alloc_fast_reg_mr(). Otherwise callers just get garbage for the memory keys and can't do anything useful with these MRs. Signed-off-by: NVladimir Sokolovsky <vlad@mellanox.co.il> Signed-off-by: NRoland Dreier <rolandd@cisco.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: [WATCHDOG] removed unused #include <version.h> [WATCHDOG] at91rm9200_wdt.c: fix misleading indentation [WATCHDOG] mpc8xxx_wdt: fix modular build [WATCHDOG] hpwdt.c kdebug support [WATCHDOG] Add support for the IDT RC32434 watchdog [WATCHDOG] Add support for the built-int RDC R-321x SoC watchdog [WATHDOG] delete unused driver mpc8xx_wdt.c [WATCHDOG] Fix s3c2410_wdt driver coding style issues [WATCHDOG] Clean out header of s3c2410_wdt driver. [WATCHDOG] Fix NULL usage in s3c2410_wdt driver.
-