In previous commit, error handling for incoming packet processing is
outside of packetization. This is nice for reading the codes.

This commit applies this idea for outgoing packet processing, too.
Signed-off-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Current implementation reuses the value of syt field in incoming packet to
outgoing packet for full duplex timestamp synchronization, while the number
of data blocks in outgoing packets refers to hard-coded table and the
synchronization cannot be applied to non-blocking stream.

This commit passes the number of data blocks from incoming packet
processing to outgoing packet processing for the synchronization. For
normal mode, isochronous callback handler is changed to generate the values
of syt and data blocks.
Signed-off-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This function is called according to conditions between the value of
syt and streaming mode(blocking or non-blocking).

To simplify caller's work, this commit push these conditions to the
function.
Signed-off-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

In IEC 61883-6, the number of data blocks in a packet is limited up to
the value of SYT_INTERVAL. Current implementation is compliant to the
limitation, while it can cause buffer-over-run when the value of dbs
field in received packet is illegally large.

This commit adds a validator to detect such illegal packets to prevent
the buffer-over-run. Actually, the buffer is aligned to the size of memory
 page, thus this issue hardly causes system errors due to the room to page
alignment, as long as a few packets includes such jumbo payload; i.e.
a packet to several received packets.

Here, Behringer F-Control Audio 202 (based on OXFW 960) has a quirk to
postpone transferring isochronous packet till finish handling any
asynchronous packets. In this case, this model is lazy, transfers no
packets according to several cycle-start packets. After finishing, this
model pushes required data in next isochronous packet. As a result, the
packet include more data blocks than IEC 61883-6 defines.

To continue to support this model, this commit adds a new flag to extend
the length of calculated payload. This flag allows the size of payload
5 times as large as IEC 61883-6 defines. As a result, packets from this
model passed the validator successfully.
Signed-off-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add a helper to create the IEC958 channel status from an ALSA
snd_pcm_runtime structure, taking account of the sample rate and
sample size.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Reviwed-by: NMark Brown <broonie@kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add a helper for the EDID like data structure, which is typically passed
from a HDMI adapter to its associated audio driver.  This informs the
audio driver of the capabilities of the attached HDMI sink.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Reviewed-by: NMark Brown <broonie@kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The jack interface is statically included in sound core.  Having
doubly module information is rather confusing.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The file is moved to hda core and renamed to hdac_i915.c, so can be used
by both legacy HDA driver and new Skylake audio driver.

- Add snd_hdac_ prefix to the public APIs.
- The i915 audio component is moved to core bus and dynamically allocated.
- A static pointer hdac_acomp is used to help bind/unbind callbacks to get
  this component, because the sound card's private_data is used by the azx
  chip pointer, which is a legacy structure. It could be removed if private
  _data changes to some core structure which can be extended to find the
  bus.
- snd_hdac_get_display_clk() is added to get the display core clock for
  HSW/BDW.
- haswell_set_bclk() is moved to hda_intel.c because it needs to write the
  controller registers EM4/EM5, and only legacy HD-A needs it for HSW/BDW.
- Move definition of HSW/BDW-specific registers EM4/EM5 to hda_register.h
  and rename them to HSW_EM4/HSW_EM5, because other HD-A controllers have
  different layout for the extended mode registers.
Signed-off-by: NMengdong Lin <mengdong.lin@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The CA0132 DSP loader leads to NULL deference since the recent
transition to HDA core code, as it unconditionally accesses
hdac_stream->substream->runtime.  For DSP loading, the substream
shouldn't be assigned.

This patch addresses the NULL dereference above in addition to assure
the substream is cleared while DSP loading.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=98151Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Added missing model entries and updated the codec names.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modern machines tend to have only one headset jack nowadays, and they
often need these quirks.  Let's allow them applicable via model
option for ease of debugging.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch adds quirks detection to the Creative CA0132 codec, and the
quirk for Alienware 15 (2015).
Some quirks may need different pin configuration, so the relevant
compile-time configuration has been removed.
The pin configuration and related initialization verbs are generated at
runtime instead, in ca0132_config() and ca0132_prepare_verbs().
Signed-off-by: NGabriele Martino <g.martino@gmx.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

As we now have deferred probing, we can use a custom mechanism and
finally get rid of this legacy interface from the i2c core.
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>
Tested-by: NDan DeVoto <dand1972@yahoo.com>
Tested-by: NMark Elliott <txlitebeer@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

while building with allyesconfig it was giving a build warning about
unused variable. declare the variable only if the driver is built as a
module.
Signed-off-by: NSudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch creates hda_intel_trace.h to add some pm trace functions
used in hda_intel.c
Signed-off-by: NLibin Yang <libin.yang@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch does:

1. Rename the hda_intel_trace.h to hda_controller_trace.h as
this trace is used in hda_controller.c

2. Add some trace function for pcm flow.
Signed-off-by: NLibin Yang <libin.yang@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add the trace of snd_hdac_stream_start and snd_hdac_stream_stop.
Signed-off-by: NLibin Yang <libin.yang@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Tegra210 contains a similar codec as Tegra124 and can be supported using
the same patch function.
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Tegra114 contains the same codec as Tegra124 and can be supported using
the same patch function.
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Tegra30 contains the same codec as Tegra124 and can be supported using
the same patch function.
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

When probing, provide accurate error messages to help with debugging
failures.
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The HDMI codec on NVIDIA Tegra SoCs has a feature that doesn't exist on
the MCP or GPU variants. The highest bit in the vendor-defined scratch
registers can be used to trigger an interrupt in the HDMI codec, which
is signalled to the HDMI driver. This can be used to pass information,
such as the HDA format, to the HDMI driver so that it can reconfigure
itself accordingly.

While at it, change the name of the codec to Tegra124 since there are no
other SoCs in the Tegra12x family. There isn't really a Tegra12x family.
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This is set for the MCP variants of the NVIDIA HDA controller, which the
Tegra variant was derived from. This fixes the following warning at boot
time:

	[    2.486610] tegra-hda 70030000.hda: CORB reset timeout#1, CORBRP = 0
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Dell create new platform with ALC298 codec.
This patch will enable headset mode for ALC298/ALC3266 platform.
Signed-off-by: NKailang Yang <kailang@realtek.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

It's no longer a part of API but merely a local function.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Just a minor refactoring, no functional changes.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The commit [c560a679: ALSA: core: Remove child proc file elements
recursively] converted snd_card_proc_new() with the normal
snd_info_*() call and removed snd_device chain for such info
entries. However, it misses one point: the creation of the proc entry
was managed by snd_device chain in the former code, and now it's also
gone, which results in no proc files creation at all.  Mea culpa.

This patch makes snd_info_card_register() creating the all pending
child proc entries in a shot.  Also, since snd_card_register() might
be called multiple times, this function is also changed to be callable
multiple times.

Along with the changes above, now the linked list of snd_info_entry is
added at creation time instead of snd_info_register() for keeping eyes
of pending info entries.

Fixes: c560a679 ('ALSA: core: Remove child proc file elements recursively')
Reported-by: N"Lu, Han" <han.lu@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

snd_info_free_entry() releases the all children nodes as well, but due
to the wrong timing of releasing the link, the children nodes may be
disconnected but left unreleased.  This patch fixes it by moving the
link free at the right position.  Also it eases list_for_each_entry()
without _safe option in snd_info_disconnect() because it no longer
frees the children nodes there.

Fixes: c560a679 ('ALSA: core: Remove child proc file elements recursively')
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Support headset mode for ALC298 platform.
Signed-off-by: NKailang Yang <kailang@realtek.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Janitorial patch (no functional change)
Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Commit a41d1224 ("ALSA: hda - Embed bus into controller object")
introduced a regression in the Tegra HDA driver that causes the
following oops during boot:

	[    2.333458] Unable to handle kernel NULL pointer dereference at virtual address 000004c4
	[    2.341537] pgd = c0004000
	[    2.344312] [000004c4] *pgd=00000000
	[    2.347898] Internal error: Oops: 5 [#1] PREEMPT SMP ARM
	[    2.353200] Modules linked in:
	[    2.356264] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W       4.1.0-rc2-next-20150505-00344-g8577890defbf #79
	[    2.366682] Hardware name: NVIDIA Tegra SoC (Flattened Device Tree)
	[    2.372939] task: ee0d8b40 ti: ee0da000 task.ti: ee0da000
	[    2.378336] PC is at azx_bus_init+0x18/0xf4
	[    2.382516] LR is at hda_tegra_probe+0x6c/0x478
	[    2.387043] pc : [<c06156c4>]    lr : [<c061cf00>]    psr: 60000113
	[    2.387043] sp : ee0dbe38  ip : 00000000  fp : 00000000
	[    2.398501] r10: ed874c00  r9 : 000000fd  r8 : 00000000
	[    2.403717] r7 : ed874c10  r6 : 00000000  r5 : 00000000  r4 : ed016810
	[    2.410232] r3 : c08a2ad4  r2 : c08a1ea0  r1 : 00000000  r0 : ed016810
	[    2.416750] Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment kernel
	[    2.424046] Control: 10c5387d  Table: 8000406a  DAC: 00000015
	[    2.429783] Process swapper/0 (pid: 1, stack limit = 0xee0da210)
	[    2.435778] Stack: (0xee0dbe38 to 0xee0dc000)
	[    2.440129] be20:                                                       00000000 ed016810
	[    2.448297] be40: 00000000 c061cf00 00000000 ee0dbe5c ed8735d0 c0a7bc48 ed02fd50 ed016000
	[    2.456462] be60: c1250164 ed874c10 c0c66bf8 fffffdfb 00000000 000000fd c0b8dc98 c046664c
	[    2.464628] be80: c0466608 c1250164 ed874c10 00000000 c0c66bf8 c0464eb4 ed874c10 c0c66bf8
	[    2.472793] bea0: ed874c44 c0c43458 00000000 c04650d0 00000000 c0c66bf8 c046503c c04633b4
	[    2.480959] bec0: ee11bea4 ed85f390 c0c66bf8 ed017ac0 00000000 c0464634 c0ab2b7c c0c66bf8
	[    2.489125] bee0: c0bfde20 c0c66bf8 c0bfde20 ed01ce40 c0b7b414 c04656e8 c04665b0 c0bfde20
	[    2.497291] bf00: c0bfde20 c0009770 ee0d8b40 c0c02488 60000113 00000000 00000000 00000003
	[    2.505458] bf20: 00000000 c0c02488 60000113 00000000 c0b54598 c0b16a90 ef7fcc57 c0041228
	[    2.513624] bf40: c0a9150c ef7fcc5f 00000006 00000006 00000000 c0bf1fa8 c0bf2354 00000006
	[    2.521790] bf60: c0b8dc90 c0c7c000 c0c7c000 c0b8dc98 00000000 c0b54dd8 00000006 00000006
	[    2.529956] bf80: c0b54598 00000000 00000000 c07ff08c 00000000 00000000 00000000 00000000
	[    2.538122] bfa0: 00000000 c07ff094 00000000 c000f5a0 00000000 00000000 00000000 00000000
	[    2.546286] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
	[    2.554451] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 fffff7ff c013f264
	[    2.562624] [<c06156c4>] (azx_bus_init) from [<c061cf00>] (hda_tegra_probe+0x6c/0x478)
	[    2.570535] [<c061cf00>] (hda_tegra_probe) from [<c046664c>] (platform_drv_probe+0x44/0xa4)
	[    2.578879] [<c046664c>] (platform_drv_probe) from [<c0464eb4>] (driver_probe_device+0x174/0x2b8)
	[    2.587739] [<c0464eb4>] (driver_probe_device) from [<c04650d0>] (__driver_attach+0x94/0x98)
	[    2.596172] [<c04650d0>] (__driver_attach) from [<c04633b4>] (bus_for_each_dev+0x6c/0xa0)
	[    2.604342] [<c04633b4>] (bus_for_each_dev) from [<c0464634>] (bus_add_driver+0x148/0x1f0)
	[    2.612597] [<c0464634>] (bus_add_driver) from [<c04656e8>] (driver_register+0x78/0xf8)
	[    2.620593] [<c04656e8>] (driver_register) from [<c0009770>] (do_one_initcall+0x8c/0x1d4)
	[    2.628765] [<c0009770>] (do_one_initcall) from [<c0b54dd8>] (kernel_init_freeable+0x144/0x1e4)
	[    2.637459] [<c0b54dd8>] (kernel_init_freeable) from [<c07ff094>] (kernel_init+0x8/0xe8)
	[    2.645543] [<c07ff094>] (kernel_init) from [<c000f5a0>] (ret_from_fork+0x14/0x34)

This is caused by azx_bus_init() trying to dereference chip->card, which
for the Tegra driver doesn't get initialized until sometime later during
the call to hda_tegra_create().

Fix this by mimicking the behaviour of the Intel driver and defer HDA
bus initialization until right before the call to snd_device_new().

Fixes: a41d1224 ('ALSA: hda - Embed bus into controller object')
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

In SKL, HDMI/DP codec and PCH HD Audio Controller are in different power wells,
so it's necessary to reset display audio codecs when power well on, otherwise
display audio codecs will disappear when resume from low power state.
Reset steps when power on:
    enable codec wakeup -> azx_init_chip() -> disable codec wakeup

The callback for codec wakeup enable/disable is in drivers/gpu/drm/i915/.
Signed-off-by: NLu, Han <han.lu@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add support for enabling codec wakeup override signal to allow
re-enumeration of the controller on SKL after resume from low power state.

In SKL, HDMI/DP codec and PCH HD Audio Controller are in different power
wells, so it's necessary to reset display audio codecs when power well on,
otherwise display audio codecs will disappear when resume from low power
state.
Reset steps when power on:
    enable codec wakeup -> azx_init_chip() -> disable codec wakeup

v3 by Jani: Simplify to only support toggling the appropriate chicken bit.

v4 by Han: add explanation and specify the hw swquence.
Signed-off-by: NLu, Han <han.lu@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Building errors reported such as below when 'CONFIG_INPUT=m':
    ...undefined reference to `input_xxx'...

Here change to enable SND_JACK selectively to fix the issue.

Also remove the config 'SND_HDA_INPUT_JACK' which won't be
used anymore.
Signed-off-by: NJie Yang <yang.jie@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Another fixes for NULL jack->input_dev in some places in jack.c.

Fixes: 2ba2dfa1 ('ALSA: hda - Update to use the new jack kctls method')
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

There is no input_dev for phantom jack, we should not report
input event for it, otherwise, NULL pointer dereference error
will occur.

Fixes: 2ba2dfa1 ('ALSA: hda - Update to use the new jack kctls method')
Signed-off-by: NJie Yang <yang.jie@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>