Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 06 6月, 2012 2 次提交
  3. 01 6月, 2012 1 次提交
  5. 23 5月, 2012 1 次提交
    • J
      Revert "sched, perf: Use a single callback into the scheduler" · ab0cce56
      由 Jiri Olsa 提交于 
      This reverts commit cb04ff9a ("sched, perf: Use a single
callback into the scheduler").

Before this change was introduced, the process switch worked
like this (wrt. to perf event schedule):

     schedule (prev, next)
       - schedule out all perf events for prev
       - switch to next
       - schedule in all perf events for current (next)

After the commit, the process switch looks like:

     schedule (prev, next)
       - schedule out all perf events for prev
       - schedule in all perf events for (next)
       - switch to next

The problem is, that after we schedule perf events in, the pmu
is enabled and we can receive events even before we make the
switch to next - so "current" still being prev process (event
SAMPLE data are filled based on the value of the "current"
process).

Thats exactly what we see for test__PERF_RECORD test. We receive
SAMPLES with PID of the process that our tracee is scheduled
from.

Discussed with Peter Zijlstra:

 > Bah!, yeah I guess reverting is the right thing for now. Sad
 > though.
 >
 > So by having the two hooks we have a black-spot between them
 > where we receive no events at all, this black-spot covers the
 > hand-over of current and we thus don't receive the 'wrong'
 > events.
 >
 > I rather liked we could do away with both that black-spot and
 > clean up the code a little, but apparently people rely on it.
Signed-off-by: NJiri Olsa <jolsa@redhat.com>
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: acme@redhat.com
Cc: paulus@samba.org
Cc: cjashfor@linux.vnet.ibm.com
Cc: fweisbec@gmail.com
Cc: eranian@google.com
Link: http://lkml.kernel.org/r/20120523111302.GC1638@m.brq.redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
      ab0cce56
  7. 09 5月, 2012 2 次提交
  9. 26 4月, 2012 2 次提交
  11. 14 4月, 2012 2 次提交
    • S
      uprobes/core: Decrement uprobe count before the pages are unmapped · cbc91f71
      由 Srikar Dronamraju 提交于 
      Uprobes has a callback (uprobe_munmap()) in the unmap path to
maintain the uprobes count.

In the exit path this callback gets called in unlink_file_vma().
However by the time unlink_file_vma() is called, the pages would
have been unmapped (in unmap_vmas()) and the task->rss_stat counts
accounted (in zap_pte_range()).

If the exiting process has probepoints, uprobe_munmap() checks if
the breakpoint instruction was around before decrementing the probe
count.

This results in a file backed page being reread by uprobe_munmap()
and hence it does not find the breakpoint.

This patch fixes this problem by moving the callback to
unmap_single_vma(). Since unmap_single_vma() may not unmap the
complete vma, add start and end parameters to uprobe_munmap().

This bug became apparent courtesy of commit c3f0327f
("mm: add rss counters consistency check").
Signed-off-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com>
Cc: Linux-mm <linux-mm@kvack.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Anton Arapov <anton@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120411103527.23245.9835.sendpatchset@srdronam.in.ibm.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
      cbc91f71
    • S
      uprobes/core: Make background page replacement logic account for rss_stat counters · 7396fa81
      由 Srikar Dronamraju 提交于 
      Background page replacement logic adds a new anonymous page
instead of a file backed (while inserting a breakpoint) /
anonymous page (while removing a breakpoint).

Hence the uprobes logic should take care to update the
task->ss_stat counters accordingly.

This bug became apparent courtesy of commit c3f0327f
("mm: add rss counters consistency check").
Signed-off-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com>
Cc: Linux-mm <linux-mm@kvack.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Anton Arapov <anton@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120411103516.23245.2700.sendpatchset@srdronam.in.ibm.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
      7396fa81
  13. 31 3月, 2012 2 次提交
    • S
      uprobes/core: Optimize probe hits with the help of a counter · 682968e0
      由 Srikar Dronamraju 提交于 
      Maintain a per-mm counter: number of uprobes that are inserted
on this process address space.

This counter can be used at probe hit time to determine if we
need a lookup in the uprobes rbtree. Everytime a probe gets
inserted successfully, the probe count is incremented and
everytime a probe gets removed, the probe count is decremented.

The new uprobe_munmap hook ensures the count is correct on a
unmap or remap of a region. We expect that once a
uprobe_munmap() is called, the vma goes away.  So
uprobe_unregister() finding a probe to unregister would either
mean unmap event hasnt occurred yet or a mmap event on the same
executable file occured after a unmap event.

Additionally, uprobe_mmap hook now also gets called:

 a. on every executable vma that is COWed at fork.
 b. a vma of interest is newly mapped; breakpoint insertion also
    happens at the required address.

On process creation, make sure the probes count in the child is
set correctly.

Special cases that are taken care include:

 a. mremap
 b. VM_DONTCOPY vmas on fork()
 c. insertion/removal races in the parent during fork().
Signed-off-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com>
Cc: Linux-mm <linux-mm@kvack.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Anton Arapov <anton@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120330182646.10018.85805.sendpatchset@srdronam.in.ibm.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
      682968e0
    • S
      uprobes/core: Allocate XOL slots for uprobes use · d4b3b638
      由 Srikar Dronamraju 提交于 
      Uprobes executes the original instruction at a probed location
out of line. For this, we allocate a page (per mm) upon the
first uprobe hit, in the process user address space, divide it
into slots that are used to store the actual instructions to be
singlestepped. These slots are known as xol (execution out of
line) slots.

Care is taken to ensure that the allocation is in an unmapped
area as close to the top of the user address space as possible,
with appropriate permission settings to keep selinux like
frameworks happy.

Upon a uprobe hit, a free slot is acquired, and is released
after the singlestep completes.

Lots of improvements courtesy suggestions/inputs from Peter and
Oleg.

[ Folded a fix for build issue on powerpc fixed and reported by
  Stephen Rothwell. ]
Signed-off-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com>
Cc: Linux-mm <linux-mm@kvack.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Anton Arapov <anton@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120330182631.10018.48175.sendpatchset@srdronam.in.ibm.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
      d4b3b638
  15. 24 3月, 2012 1 次提交
  17. 23 3月, 2012 1 次提交
    • P
      perf: Fix mmap_page capabilities and docs · c7206205
      由 Peter Zijlstra 提交于 
      Complete the syscall-less self-profiling feature and address
all complaints, namely:

 - capabilities, so we can detect what is actually available at runtime

     Add a capabilities field to perf_event_mmap_page to indicate
     what is actually available for use.

 - on x86: RDPMC weirdness due to being 40/48 bits and not sign-extending
   properly.

 - ABI documentation as to how all this stuff works.

Also improve the documentation for the new features.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vince Weaver <vweaver1@eecs.utk.edu>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1332433596.2487.33.camel@twinsSigned-off-by: NIngo Molnar <mingo@kernel.org>
      c7206205
  19. 14 3月, 2012 1 次提交
    • S
      uprobes/core: Handle breakpoint and singlestep exceptions · 0326f5a9
      由 Srikar Dronamraju 提交于 
      Uprobes uses exception notifiers to get to know if a thread hit
a breakpoint or a singlestep exception.

When a thread hits a uprobe or is singlestepping post a uprobe
hit, the uprobe exception notifier sets its TIF_UPROBE bit,
which will then be checked on its return to userspace path
(do_notify_resume() ->uprobe_notify_resume()), where the
consumers handlers are run (in task context) based on the
defined filters.

Uprobe hits are thread specific and hence we need to maintain
information about if a task hit a uprobe, what uprobe was hit,
the slot where the original instruction was copied for xol so
that it can be singlestepped with appropriate fixups.

In some cases, special care is needed for instructions that are
executed out of line (xol). These are architecture specific
artefacts, such as handling RIP relative instructions on x86_64.

Since the instruction at which the uprobe was inserted is
executed out of line, architecture specific fixups are added so
that the thread continues normal execution in the presence of a
uprobe.

Postpone the signals until we execute the probed insn.
post_xol() path does a recalc_sigpending() before return to
user-mode, this ensures the signal can't be lost.

Uprobes relies on DIE_DEBUG notification to notify if a
singlestep is complete.

Adds x86 specific uprobe exception notifiers and appropriate
hooks needed to determine a uprobe hit and subsequent post
processing.

Add requisite x86 fixups for xol for uprobes. Specific cases
needing fixups include relative jumps (x86_64), calls, etc.

Where possible, we check and skip singlestepping the
breakpointed instructions. For now we skip single byte as well
as few multibyte nop instructions. However this can be extended
to other instructions too.

Credits to Oleg Nesterov for suggestions/patches related to
signal, breakpoint, singlestep handling code.
Signed-off-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com>
Cc: Linux-mm <linux-mm@kvack.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com
[ Performed various cleanliness edits ]
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      0326f5a9
  21. 13 3月, 2012 3 次提交
  23. 05 3月, 2012 3 次提交
    • S
      perf: Add callback to flush branch_stack on context switch · d010b332
      由 Stephane Eranian 提交于 
      With branch stack sampling, it is possible to filter by priv levels.

In system-wide mode, that means it is possible to capture only user
level branches. The builtin SW LBR filter needs to disassemble code
based on LBR captured addresses. For that, it needs to know the task
the addresses are associated with. Because of context switches, the
content of the branch stack buffer may contain addresses from
different tasks.

We need a callback on context switch to either flush the branch stack
or save it. This patch adds a new callback in struct pmu which is called
during context switches. The callback is called only when necessary.
That is when a system-wide context has, at least, one event which
uses PERF_SAMPLE_BRANCH_STACK. The callback is never called for
per-thread context.

In this version, the Intel x86 code simply flushes (resets) the LBR
on context switches (fills it with zeroes). Those zeroed branches are
then filtered out by the SW filter.
Signed-off-by: NStephane Eranian <eranian@google.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1328826068-11713-11-git-send-email-eranian@google.comSigned-off-by: NIngo Molnar <mingo@elte.hu>
      d010b332
    • S
      perf: Disable PERF_SAMPLE_BRANCH_* when not supported · 2481c5fa
      由 Stephane Eranian 提交于 
      PERF_SAMPLE_BRANCH_* is disabled for:

 - SW events (sw counters, tracepoints)
 - HW breakpoints
 - ALL but Intel x86 architecture
 - AMD64 processors
Signed-off-by: NStephane Eranian <eranian@google.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1328826068-11713-10-git-send-email-eranian@google.comSigned-off-by: NIngo Molnar <mingo@elte.hu>
      2481c5fa
    • S
      perf: Add generic taken branch sampling support · bce38cd5
      由 Stephane Eranian 提交于 
      This patch adds the ability to sample taken branches to the
perf_event interface.

The ability to capture taken branches is very useful for all
sorts of analysis. For instance, basic block profiling, call
counts, statistical call graph.

This new capability requires hardware assist and as such may
not be available on all HW platforms. On Intel x86 it is
implemented on top of the Last Branch Record (LBR) facility.

To enable taken branches sampling, the PERF_SAMPLE_BRANCH_STACK
bit must be set in attr->sample_type.

Sampled taken branches may be filtered by type and/or priv
levels.

The patch adds a new field, called branch_sample_type, to the
perf_event_attr structure. It contains a bitmask of filters
to apply to the sampled taken branches.

Filters may be implemented in HW. If the HW filter does not exist
or is not good enough, some arch may also implement a SW filter.

The following generic filters are currently defined:
- PERF_SAMPLE_USER
  only branches whose targets are at the user level

- PERF_SAMPLE_KERNEL
  only branches whose targets are at the kernel level

- PERF_SAMPLE_HV
  only branches whose targets are at the hypervisor level

- PERF_SAMPLE_ANY
  any type of branches (subject to priv levels filters)

- PERF_SAMPLE_ANY_CALL
  any call branches (may incl. syscall on some arch)

- PERF_SAMPLE_ANY_RET
  any return branches (may incl. syscall returns on some arch)

- PERF_SAMPLE_IND_CALL
  indirect call branches

Obviously filter may be combined. The priv level bits are optional.
If not provided, the priv level of the associated event are used. It
is possible to collect branches at a priv level different from the
associated event. Use of kernel, hv priv levels is subject to permissions
and availability (hv).

The number of taken branch records present in each sample may vary based
on HW, the type of sampled branches, the executed code. Therefore
each sample contains the number of taken branches it contains.
Signed-off-by: NStephane Eranian <eranian@google.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1328826068-11713-2-git-send-email-eranian@google.comSigned-off-by: NIngo Molnar <mingo@elte.hu>
      bce38cd5
  25. 28 2月, 2012 1 次提交
  27. 24 2月, 2012 1 次提交
    • I
      static keys: Introduce 'struct static_key', static_key_true()/false() and... · c5905afb
      由 Ingo Molnar 提交于 
      static keys: Introduce 'struct static_key', static_key_true()/false() and static_key_slow_[inc|dec]()

So here's a boot tested patch on top of Jason's series that does
all the cleanups I talked about and turns jump labels into a
more intuitive to use facility. It should also address the
various misconceptions and confusions that surround jump labels.

Typical usage scenarios:

        #include <linux/static_key.h>

        struct static_key key = STATIC_KEY_INIT_TRUE;

        if (static_key_false(&key))
                do unlikely code
        else
                do likely code

Or:

        if (static_key_true(&key))
                do likely code
        else
                do unlikely code

The static key is modified via:

        static_key_slow_inc(&key);
        ...
        static_key_slow_dec(&key);

The 'slow' prefix makes it abundantly clear that this is an
expensive operation.

I've updated all in-kernel code to use this everywhere. Note
that I (intentionally) have not pushed through the rename
blindly through to the lowest levels: the actual jump-label
patching arch facility should be named like that, so we want to
decouple jump labels from the static-key facility a bit.

On non-jump-label enabled architectures static keys default to
likely()/unlikely() branches.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Acked-by: NJason Baron <jbaron@redhat.com>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Cc: a.p.zijlstra@chello.nl
Cc: mathieu.desnoyers@efficios.com
Cc: davem@davemloft.net
Cc: ddaney.cavm@gmail.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20120222085809.GA26397@elte.huSigned-off-by: NIngo Molnar <mingo@elte.hu>
      c5905afb
  29. 22 2月, 2012 4 次提交
  31. 07 2月, 2012 1 次提交
    • S
      perf: Fix double start/stop in x86_pmu_start() · f39d47ff
      由 Stephane Eranian 提交于 
      The following patch fixes a bug introduced by the following
commit:

        e050e3f0 ("perf: Fix broken interrupt rate throttling")

The patch caused the following warning to pop up depending on
the sampling frequency adjustments:

  ------------[ cut here ]------------
  WARNING: at arch/x86/kernel/cpu/perf_event.c:995 x86_pmu_start+0x79/0xd4()

It was caused by the following call sequence:

perf_adjust_freq_unthr_context.part() {
     stop()
     if (delta > 0) {
          perf_adjust_period() {
              if (period > 8*...) {
                  stop()
                  ...
                  start()
              }
          }
      }
      start()
}

Which caused a double start and a double stop, thus triggering
the assert in x86_pmu_start().

The patch fixes the problem by avoiding the double calls. We
pass a new argument to perf_adjust_period() to indicate whether
or not the event is already stopped. We can't just remove the
start/stop from that function because it's called from
__perf_event_overflow where the event needs to be reloaded via a
stop/start back-toback call.

The patch reintroduces the assertion in x86_pmu_start() which
was removed by commit:

	84f2b9b2 ("perf: Remove deprecated WARN_ON_ONCE()")

In this second version, we've added calls to disable/enable PMU
during unthrottling or frequency adjustment based on bug report
of spurious NMI interrupts from Eric Dumazet.
Reported-and-tested-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NStephane Eranian <eranian@google.com>
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: markus@trippelsdorf.de
Cc: paulus@samba.org
Link: http://lkml.kernel.org/r/20120207133956.GA4932@quad
[ Minor edits to the changelog and to the code ]
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      f39d47ff
  33. 03 2月, 2012 1 次提交
    • L
      cgroup: remove cgroup_subsys argument from callbacks · 761b3ef5
      由 Li Zefan 提交于 
      The argument is not used at all, and it's not necessary, because
a specific callback handler of course knows which subsys it
belongs to.

Now only ->pupulate() takes this argument, because the handlers of
this callback always call cgroup_add_file()/cgroup_add_files().

So we reduce a few lines of code, though the shrinking of object size
is minimal.

 16 files changed, 113 insertions(+), 162 deletions(-)

   text    data     bss     dec     hex filename
5486240  656987 7039960 13183187         c928d3 vmlinux.o.orig
5486170  656987 7039960 13183117         c9288d vmlinux.o
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Signed-off-by: NTejun Heo <tj@kernel.org>
      761b3ef5
  35. 27 1月, 2012 1 次提交
    • S
      perf: Fix broken interrupt rate throttling · e050e3f0
      由 Stephane Eranian 提交于 
      This patch fixes the sampling interrupt throttling mechanism.

It was broken in v3.2. Events were not being unthrottled. The
unthrottling mechanism required that events be checked at each
timer tick.

This patch solves this problem and also separates:

  - unthrottling
  - multiplexing
  - frequency-mode period adjustments

Not all of them need to be executed at each timer tick.

This third version of the patch is based on my original patch +
PeterZ proposal (https://lkml.org/lkml/2012/1/7/87).

At each timer tick, for each context:

  - if the current CPU has throttled events, we unthrottle events

  - if context has frequency-based events, we adjust sampling periods

  - if we have reached the jiffies interval, we multiplex (rotate)

We decoupled rotation (multiplexing) from frequency-mode sampling
period adjustments.  They should not necessarily happen at the same
rate. Multiplexing is subject to jiffies_interval (currently at 1
but could be higher once the tunable is exposed via sysfs).

We have grouped frequency-mode adjustment and unthrottling into the
same routine to minimize code duplication. When throttled while in
frequency mode, we scan the events only once.

We have fixed the threshold enforcement code in __perf_event_overflow().
There was a bug whereby it would allow more than the authorized rate
because an increment of hwc->interrupts was not executed at the right
place.

The patch was tested with low sampling limit (2000) and fixed periods,
frequency mode, overcommitted PMU.

On a 2.1GHz AMD CPU:

 $ cat /proc/sys/kernel/perf_event_max_sample_rate
 2000

We set a rate of 3000 samples/sec (2.1GHz/3000 = 700000):

 $ perf record -e cycles,cycles -c 700000  noploop 10
 $ perf report -D | tail -21

 Aggregated stats:
           TOTAL events:      80086
            MMAP events:         88
            COMM events:          2
            EXIT events:          4
        THROTTLE events:      19996
      UNTHROTTLE events:      19996
          SAMPLE events:      40000

 cycles stats:
           TOTAL events:      40006
            MMAP events:          5
            COMM events:          1
            EXIT events:          4
        THROTTLE events:       9998
      UNTHROTTLE events:       9998
          SAMPLE events:      20000

 cycles stats:
           TOTAL events:      39996
        THROTTLE events:       9998
      UNTHROTTLE events:       9998
          SAMPLE events:      20000

For 10s, the cap is 2x2000x10 = 40000 samples.
We get exactly that: 20000 samples/event.
Signed-off-by: NStephane Eranian <eranian@google.com>
Cc: <stable@kernel.org> # v3.2+
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20120126160319.GA5655@quadSigned-off-by: NIngo Molnar <mingo@elte.hu>
      e050e3f0
  37. 21 1月, 2012 2 次提交
  39. 02 1月, 2012 1 次提交
  41. 21 12月, 2011 5 次提交
  43. 14 12月, 2011 1 次提交
  45. 13 12月, 2011 1 次提交
    • T
      cgroup: don't use subsys->can_attach_task() or ->attach_task() · bb9d97b6
      由 Tejun Heo 提交于 
      Now that subsys->can_attach() and attach() take @tset instead of
@task, they can handle per-task operations.  Convert
->can_attach_task() and ->attach_task() users to use ->can_attach()
and attach() instead.  Most converions are straight-forward.
Noteworthy changes are,

* In cgroup_freezer, remove unnecessary NULL assignments to unused
  methods.  It's useless and very prone to get out of sync, which
  already happened.

* In cpuset, PF_THREAD_BOUND test is checked for each task.  This
  doesn't make any practical difference but is conceptually cleaner.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reviewed-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: NFrederic Weisbecker <fweisbec@gmail.com>
Acked-by: NLi Zefan <lizf@cn.fujitsu.com>
Cc: Paul Menage <paul@paulmenage.org>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: James Morris <jmorris@namei.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
      bb9d97b6