The "num_reply" parameter to ceph_osdc_new_request() is never
used inside that function, so get rid of it.

Note that ceph_sync_write() passes 2 for that argument, while all
other callers pass 1.  It doesn't matter, but perhaps someone should
verify this doesn't indicate a problem.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

The mds now sends back a created inode if the create request
performed the create.  If the file already existed, no inode is
returned in the reply.  This allows ceph to set the created flag
in atomic_open so that permissions are properly checked in the case
that the file wasn't created by the create call to the mds.

To ensure compability with previous kernels, a feature for sending
back the inode in the create reply was added, so that the mds will
only send back the inode if the client indicates it supports the
feature.
Signed-off-by: NSam Lang <sam.lang@inktank.com>
Reviewed-by: NSage Weil <sage@inktank.com>

The error returned by ceph_mdsc_do_request includes errors sending the
request, errors on timeout, or any errors coming from the mds.  If
ceph_mdsc_do_request returns an error, the reply struct will most likely
be bogus.  We need to bail out and propogate the error instead of
overwriting it.
Signed-off-by: NSam Lang <sam.lang@inktank.com>
Reviewed-by: NSage Weil <sage@inktank.com>

But the kernel decided to call it "origin" instead.  Fix most of the
sites.
Acked-by: NHugh Dickins <hughd@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

ceph_aio_write() has an optimization that marks cap EPH_CAP_FILE_WR
dirty before data is copied to page cache and inode size is updated.
If ceph_check_caps() flushes the dirty cap before the inode size is
updated, MDS can miss the new inode size. The fix is move
ceph_{get,put}_cap_refs() into ceph_write_{begin,end}() and call
__ceph_mark_dirty_caps() after inode size is updated.
Signed-off-by: NYan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: NSage Weil <sage@inktank.com>

If we are creating an osd request and get an invalid layout, return
an EINVAL to the caller.  We switch up the return to have an error
code instead of NULL implying -ENOMEM.
Signed-off-by: NSage Weil <sage@inktank.com>
Reviewed-by: NAlex Elder <elder@inktank.com>

The initial ->atomic_open op was carried over from the old intent code,
which was incomplete and didn't really work.  Replace it with a fresh
method.  In particular:

 * always attempt to do an atomic open+lookup, both for the create case
   and for lookups of existing files.
 * fix symlink handling by returning 1 to the VFS so that we can follow
   the link to its destination. This fixes a longstanding ceph bug (#2392).
Signed-off-by: NSage Weil <sage@inktank.com>

Just pass struct file *.  Methods are happier that way...
There's no need to return struct file * from finish_open() now,
so let it return int.  Next: saner prototypes for parts in
namei.c
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Change of calling conventions:
old		new
NULL		1
file		0
ERR_PTR(-ve)	-ve

Caller *knows* that struct file *; no need to return it.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

... and let finish_open() report having opened the file via that sucker.
Next step: don't modify od->filp at all.

[AV: FILE_CREATE was already used by cifs; Miklos' fix folded]
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Add an ->atomic_open implementation which replaces the atomic lookup+open+create
operation implemented via ->lookup and ->create operations.
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>
CC: Sage Weil <sage@newdream.net>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

What was the purpose of this?
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>
CC: Sage Weil <sage@newdream.net>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

This was an ill-conceived feature that has been removed from Ceph.  Do
this gracefully:

 - reject attempts to specify a preferred_osd via the ioctl
 - stop exposing this information via virtual xattrs
 - always fill in -1 for requests, in case we talk to an older server
 - don't calculate preferred_osd placements/pgids
Reviewed-by: NAlex Elder <elder@inktank.com>
Signed-off-by: NSage Weil <sage@inktank.com>

Commit 06222e49 got the if wrong so that
it always evaluates as true.  This is semantically harmless, but makes
SEEK_CUR and SEEK_SET needlessly query the server.

Rewrite the if to explicitly enumerate the cases we DO need a valid i_size
to make this code less fragile.
Reported-by: NRoel Kluin <roel.kluin@gmail.com>
Signed-off-by: NSage Weil <sage@newdream.net>

We have been using i_lock to protect all kinds of data structures in the
ceph_inode_info struct, including lists of inodes that we need to iterate
over while avoiding races with inode destruction.  That requires grabbing
a reference to the inode with the list lock protected, but igrab() now
takes i_lock to check the inode flags.

Changing the list lock ordering would be a painful process.

However, using a ceph-specific i_ceph_lock in the ceph inode instead of
i_lock is a simple mechanical change and avoids the ordering constraints
imposed by igrab().
Reported-by: NAmon Ott <a.ott@m-privacy.de>
Signed-off-by: NSage Weil <sage@newdream.net>

d_parent is protected by d_lock: use it when looking up a dentry's parent
directory inode.  Also take a reference and drop it in the caller to avoid
a use-after-free.
Reported-by: NAl Viro <viro@ZenIV.linux.org.uk>
Reviewed-by: NYehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: NSage Weil <sage@newdream.net>

We weren't properly calling lookup_instantiate_filp when setting up the
lookup intent, which could lead to file leakage on errors.  So:

 - use separate helper for the hidden snapdir translation, immediately
   following the mds request
 - use ceph_finish_lookup for the final dentry/return value dance in the
   exit path
 - lookup_instantiate_filp on success
Reported-by: NAl Viro <viro@ZenIV.linux.org.uk>
Reviewed-by: NYehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: NSage Weil <sage@newdream.net>

We only need to put these on the directory unsafe list if they have
side effects that fsync(2) should flush out.
Reviewed-by: NYehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: NSage Weil <sage@newdream.net>

We were always getting NULL here because the intent file f_dentry is always
NULL at this point, which means we were always passing NULL to
ceph_mdsc_do_request.  In reality, this was fine, since this isn't
currently ever a write operation that needs to get strung on the dir's
unsafe list.

Use the dir explicitly, and only pass it if this open has side-effects that
a dir fsync should flush.
Reviewed-by: NYehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: NSage Weil <sage@newdream.net>

The generic_file_aio_write call may block on balance_dirty_pages while we
flush data to the OSDs.  If we hold a reference to the FILE_WR cap during
that interval revocation by the MDS (e.g., to do a stat(2)) may be very
slow.
Reviewed-by: NYehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: NSage Weil <sage@newdream.net>

This allows us to force IO through the sync path which you normally only
get when multiple clients are reading/writing to the same file or by
mounting with -o sync.  Among other things, this lets test programs verify
correctness with a single mount.
Reviewed-by: NYehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: NSage Weil <sage@newdream.net>

This converts everybody to handle SEEK_HOLE/SEEK_DATA properly.  In some cases
we just return -EINVAL, in others we do the normal generic thing, and in others
we're simply making sure that the properly due-dilligence is done.  For example
in NFS/CIFS we need to make sure the file size is update properly for the
SEEK_HOLE and SEEK_DATA case, but since it calls the generic llseek stuff itself
that is all we have to do.  Thanks,
Signed-off-by: NJosef Bacik <josef@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

->create() instances are much happier that way...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

We were iterating across stripe boundaries properly, but not moving the
write buffer pointer forward.  This caused us to rewrite the same data
after the break.  Fix by adjusting the data pointer forward, and
recalculating the io and buffer alignment after the break.
Signed-off-by: NSage Weil <sage@newdream.net>

 dd if=/dev/urandom of=/mnt/fs_depot/dd10 bs=500 seek=8388 count=1
 dd if=/mnt/fs_depot/dd10 of=/root/dd10out bs=500 skip=8388 count=1
Reported-by: NHenry C Chang <henry.cy.chang@gmail.com>
Signed-off-by: NSage Weil <sage@newdream.net>

Getting ENOENT is equivalent to reading 0 bytes.  Make that correction
before setting up the hit_stripe and was_short flags.

Fixes the following case:
 dd if=/dev/zero of=/mnt/fs_depot/dd3 bs=1 seek=1048576 count=0
 dd if=/mnt/fs_depot/dd3 of=/root/ddout1 skip=8 bs=500 count=2 iflag=direct
Reported-by: NHenry C Chang <henry.cy.chang@gmail.com>
Signed-off-by: NSage Weil <sage@newdream.net>

If we get a short read from the OSD because the object is small, we need to
zero the remainder of the buffer.  For O_DIRECT reads, the attempted range
is not trimmed to i_size by the VFS, so we were actually looping
indefinitely.

Fix by trimming by i_size, and the unconditionally zeroing the trailing
range.
Reported-by: NJeff Wu <cpwu@tnsoft.com.cn>
Signed-off-by: NSage Weil <sage@newdream.net>

We should use ihold whenever we already have a stable inode ref, even
when we aren't holding i_lock.  This avoids adding new and unnecessary
locking dependencies.
Signed-off-by: NSage Weil <sage@newdream.net>

The __mark_dirty_inode helper now takes i_lock as of 250df6ed.  Fix the
one ceph callers that held i_lock (__ceph_mark_dirty_caps) to return the
flags value so that the callers can do it outside of i_lock.
Signed-off-by: NSage Weil <sage@newdream.net>

In sync_write_wait(), we assume that the newest request is at the
tail of unsafe write list. We should maintain the semantics here.
Signed-off-by: NHenry C Chang <henry_c_chang@tcloudcomputing.com>
Signed-off-by: NSage Weil <sage@newdream.net>

This fixes the list corruption warning like this:

------------[ cut here ]------------
WARNING: at lib/list_debug.c:30 __list_add+0x68/0x81()
Hardware name: X8DTU
list_add corruption. prev->next should be next (ffff880618931250), but was (null). (prev=ffff880c188b9130).
Modules linked in: nfsd lockd nfs_acl auth_rpcgss exportfs ceph libceph libcrc32c sunrpc ipv6 fuse igb i2c_i801 ioatdma i2c_core iTCO_wdt iTCO_vendor_support joydev dca serio_raw usb_storage [last unloaded: scsi_wait_scan]
Pid: 10977, comm: smbd Tainted: G        W  2.6.32.23-170.Elaster.xendom0.fc12.x86_64 #1
Call Trace:
[<ffffffff8105753c>] warn_slowpath_common+0x7c/0x94
[<ffffffff810575ab>] warn_slowpath_fmt+0x41/0x43
[<ffffffff812351a3>] __list_add+0x68/0x81
[<ffffffffa014799d>] ceph_aio_write+0x614/0x8a2 [ceph]
[<ffffffff8111d2a0>] do_sync_write+0xe8/0x125
[<ffffffff81075a1f>] ? autoremove_wake_function+0x0/0x39
[<ffffffff811f21ec>] ? selinux_file_permission+0x5c/0xb3
[<ffffffff811e8521>] ? security_file_permission+0x16/0x18
[<ffffffff8111d864>] vfs_write+0xae/0x10b
[<ffffffff8111d91b>] sys_pwrite64+0x5a/0x76
[<ffffffff81012d32>] system_call_fastpath+0x16/0x1b
---[ end trace 08573eb9f07ff6f4 ]---
Signed-off-by: NHenry C Chang <henry_c_chang@tcloudcomputing.com>
Signed-off-by: NSage Weil <sage@newdream.net>

For read operation, we have to set the argument _write_ of get_user_pages
to 1 since we will write data to pages. Also, we need to SetPageDirty before
releasing these pages.
Signed-off-by: NHenry C Chang <henry_c_chang@tcloudcomputing.com>
Signed-off-by: NSage Weil <sage@newdream.net>

The user buffer may be 512-byte aligned, not page-aligned.  We were
assuming the buffer was page-aligned and only accounting for
non-page-aligned io offsets.
Signed-off-by: NHenry C Chang <henry_c_chang@tcloudcomputing.com>
Signed-off-by: NSage Weil <sage@newdream.net>

We used to infer alignment of IOs within a page based on the file offset,
which assumed they matched.  This broke with direct IO that was not aligned
to pages (e.g., 512-byte aligned IO).  We were also trusting the alignment
specified in the OSD reply, which could have been adjusted by the server.

Explicitly specify the page alignment when setting up OSD IO requests.
Signed-off-by: NSage Weil <sage@newdream.net>

The offset/length arguments aren't used.
Signed-off-by: NSage Weil <sage@newdream.net>

Normally when we open a file we already have a cap, and simply update the
wanted set.  However, if we open a file for write, but don't have an auth
cap, that doesn't work; we need to open a new cap with the auth MDS.  Only
reuse existing caps if we are opening for read or the existing cap is auth.
Signed-off-by: NSage Weil <sage@newdream.net>

This factors out protocol and low-level storage parts of ceph into a
separate libceph module living in net/ceph and include/linux/ceph.  This
is mostly a matter of moving files around.  However, a few key pieces
of the interface change as well:

 - ceph_client becomes ceph_fs_client and ceph_client, where the latter
   captures the mon and osd clients, and the fs_client gets the mds client
   and file system specific pieces.
 - Mount option parsing and debugfs setup is correspondingly broken into
   two pieces.
 - The mon client gets a generic handler callback for otherwise unknown
   messages (mds map, in this case).
 - The basic supported/required feature bits can be expanded (and are by
   ceph_fs_client).

No functional change, aside from some subtle error handling cases that got
cleaned up in the refactoring process.
Signed-off-by: NSage Weil <sage@newdream.net>

Fix argument order.
Signed-off-by: NHenry C Chang <henry_c_chang@tcloudcomputing.com>
Signed-off-by: NSage Weil <sage@newdream.net>

Signed-off-by: NSage Weil <sage@newdream.net>

Implement flock inode operation to support advisory file locking.  All
lock/unlock operations are synchronous with the MDS.  Lock state is
sent when reconnecting to a recovering MDS to restore the shared lock
state.
Signed-off-by: NGreg Farnum <gregf@hq.newdream.net>
Signed-off-by: NSage Weil <sage@newdream.net>