Instead of calling two functions and repeating expensive checks, call one
function and provide it with before/after information.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Many msrs and the like will only be used by the host if we schedule() or
return to userspace.  Therefore, we avoid saving them if we handle the
exit within the kernel, and if a reschedule is not requested.

Based on a patch from Eddie Dong <eddie.dong@intel.com> with a couple of
fixes by me.
Signed-off-by: NYaozu(Eddie) Dong <eddie.dong@intel.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

The lazy fpu changes did not take into account that some vmexit handlers
can sleep.  Move loading the guest state into the inner loop so that it
can be reloaded if necessary, and move loading the host state into
vmx_vcpu_put() so it can be performed whenever we relinquish the vcpu.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

First thing mm.h does is including sched.h solely for can_do_mlock() inline
function which has "current" dereference inside. By dealing with can_do_mlock()
mm.h can be detached from sched.h which is good. See below, why.

This patch
a) removes unconditional inclusion of sched.h from mm.h
b) makes can_do_mlock() normal function in mm/mlock.c
c) exports can_do_mlock() to not break compilation
d) adds sched.h inclusions back to files that were getting it indirectly.
e) adds less bloated headers to some files (asm/signal.h, jiffies.h) that were
   getting them indirectly

Net result is:
a) mm.h users would get less code to open, read, preprocess, parse, ... if
   they don't need sched.h
b) sched.h stops being dependency for significant number of files:
   on x86_64 allmodconfig touching sched.h results in recompile of 4083 files,
   after patch it's only 3744 (-8.3%).

Cross-compile tested on

	all arm defconfigs, all mips defconfigs, all powerpc defconfigs,
	alpha alpha-up
	arm
	i386 i386-up i386-defconfig i386-allnoconfig
	ia64 ia64-up
	m68k
	mips
	parisc parisc-up
	powerpc powerpc-up
	s390 s390-up
	sparc sparc-up
	sparc64 sparc64-up
	um-x86_64
	x86_64 x86_64-up x86_64-defconfig x86_64-allnoconfig

as well as my two usual configs.
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Since nonboot CPUs are now disabled after tasks and devices have been
frozen and the CPU hotplug infrastructure is used for this purpose, we need
special CPU hotplug notifications that will help the CPU-hotplug-aware
subsystems distinguish normal CPU hotplug events from CPU hotplug events
related to a system-wide suspend or resume operation in progress.  This
patch introduces such notifications and causes them to be used during
suspend and resume transitions.  It also changes all of the
CPU-hotplug-aware subsystems to take these notifications into consideration
(for now they are handled in the same way as the corresponding "normal"
ones).

[oleg@tv-sign.ru: cleanups]
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Cc: Gautham R Shenoy <ego@in.ibm.com>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: NOleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It is illegal not to return from a pio or mmio request without completing
it, as mmio or pio is an atomic operation.  Therefore, we can simplify
the userspace interface by avoiding the completion indication.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

When emulating an mmio read, we actually emulate twice: once to determine
the physical address of the mmio, and, after we've exited to userspace to
get the mmio value, we emulate again to place the value in the result
register and update any flags.

But we don't really need to enter the guest again for that, only to take
an immediate vmexit.  So, if we detect that we're doing an mmio read,
emulate a single instruction before entering the guest again.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Set all of the host mask bits for CR0 so that we can maintain a proper
shadow of CR0.  This exposes CR0.TS, paving the way for lazy fpu handling.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

This simplifies the API somewhat (by eliminating the special-case
cmpxchg8b on i386).
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Make the exit statistics per-vcpu instead of global.  This gives a 3.5%
boost when running one virtual machine per core on my two socket dual core
(4 cores total) machine.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

By checking if a reschedule is needed, we avoid dropping the vcpu.

[With changes by me, based on Anthony Liguori's observations]
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Usually, guest page faults are detected by the kvm page fault handler,
which detects if they are shadow faults, mmio faults, pagetable faults,
or normal guest page faults.

However, in ceratin circumstances, we can detect a page fault much later.
One of these events is the following combination:

- A two memory operand instruction (e.g. movsb) is executed.
- The first operand is in mmio space (which is the fault reported to kvm)
- The second operand is in an ummaped address (e.g. a guest page fault)

The Windows 2000 installer does such an access, an promptly hangs.  Fix
by adding the missing page fault injection on that path.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Better leak detection, statistics, memory use, speed -- goodness all
around.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Solaris panics if it sees a cpu with no fpu, and it seems to rely on this
bit.  Closes sourceforge bug 1698920.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

These are really helpful when migrating an floating point app to another
machine.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

With this, we can specify that accesses to one physical memory range will
be remapped to another.  This is useful for the vga window at 0xa0000 which
is used as a movable window into the (much larger) framebuffer.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Mapping a guest page to a host page is a common operation.  Currently,
one has first to find the memory slot where the page belongs (gfn_to_memslot),
then locate the page itself (gfn_to_page()).

This is clumsy, and also won't work well with memory aliases.  So simplify
gfn_to_page() not to require memory slot translation first, and instead do it
internally.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Some older (~2.6.7) kernels write MCG_STATUS register during kernel
boot (mce_clear_all() function, called from mce_init()). It's not
currently handled by kvm and will cause it to inject a GPF.
Following patch adds a "nop" handler for this.
Signed-off-by: NSergey Kiselev <sergey.kiselev@intel.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

The SET_SREGS ioctl modifies both cr0.pe (real mode/protected mode) and
guest segment registers.  Since segment handling is modified by the mode on
Intel procesors, update the segment registers after the mode switch has taken
place.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

set_cr0_no_modeswitch() was a hack to avoid corrupting segment registers.
As we now cache the protected mode values on entry to real mode, this
isn't an issue anymore, and it interferes with reboot (which usually _is_
a modeswitch).
Signed-off-by: NAvi Kivity <avi@qumranet.com>

The current string pio interface communicates using guest virtual addresses,
relying on userspace to translate addresses and to check permissions.  This
interface cannot fully support guest smp, as the check needs to take into
account two pages at one in case an unaligned string transfer straddles a
page boundary.

Change the interface not to communicate guest addresses at all; instead use
a buffer page (mmaped by userspace) and do transfers there.  The kernel
manages the virtual to physical translation and can perform the checks
atomically by taking the appropriate locks.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Some ioctls ignore their arguments.  By requiring them to be zero now,
we allow a nonzero value to have some special meaning in the future.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

This allows us to store offsets in the kernel/user kvm_run area, and be
sure that userspace has them mapped.  As offsets can be outside the
kvm_run struct, userspace has no way of knowing how much to mmap.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Allow a special signal mask to be used while executing in guest mode.  This
allows signals to be used to interrupt a vcpu without requiring signal
delivery to a userspace handler, which is quite expensive.  Userspace still
receives -EINTR and can get the signal via sigwait().
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Currently, userspace is told about the nature of the last exit from the
guest using two fields, exit_type and exit_reason, where exit_type has
just two enumerations (and no need for more).  So fold exit_type into
exit_reason, reducing the complexity of determining what really happened.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

This is useful for paravirtualized graphics devices, for example.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Signed-off-by: NAvi Kivity <avi@qumranet.com>

We no longer emulate single instructions in userspace.  Instead, we service
mmio or pio requests.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

KVM used to handle cpuid by letting userspace decide what values to
return to the guest.  We now handle cpuid completely in the kernel.  We
still let userspace decide which values the guest will see by having
userspace set up the value table beforehand (this is necessary to allow
management software to set the cpu features to the least common denominator,
so that live migration can work).

The motivation for the change is that kvm kernel code can be impacted by
cpuid features, for example the x86 emulator.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Currently when passing the a PIO emulation request to userspace, we
rely on userspace updating %rax (on 'in' instructions) and %rsi/%rdi/%rcx
(on string instructions).  This (a) requires two extra ioctls for getting
and setting the registers and (b) is unfriendly to non-x86 archs, when
they get kvm ports.

So fix by doing the register fixups in the kernel and passing to userspace
only an abstract description of the PIO to be done.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Instead of passing a 'struct kvm_run' back and forth between the kernel and
userspace, allocate a page and allow the user to mmap() it.  This reduces
needless copying and makes the interface expandable by providing lots of
free space.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Use the minor number (232) allocated to kvm by lanana.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

The hypercall code mixes up the ->cache_regs() and ->decache_regs()
callbacks, resulting in guest register corruption.
Signed-off-by: NDor Laor <dor.laor@qumranet.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Otherwise, the core module thinks the arch module is loaded, and won't
let you reload it after you've fixed the bug.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Use the standard magic.h for kvmfs.

Cc: Avi Kivity <avi@qumranet.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

A bogus 'return r' can cause an otherwise successful module load to fail.
This both denies users the use of kvm, and it also denies them the use of
their machine, as it leaves a filesystem registered with its callbacks
pointing into now-freed module memory.

Fix by returning a zero like a good module.

Thanks to Richard Lucassen <mailinglists@lucassen.org> (?) for reporting
the problem and for providing access to a machine which exhibited it.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Enabling dirty page logging is done using KVM_SET_MEMORY_REGION ioctl.
If the memory region already exists, we need to remove write accesses,
so writes will be caught, and dirty pages will be logged.
Signed-off-by: NUri Lublin <uril@qumranet.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

To be called from kvm_vm_ioctl_set_memory_region()
Signed-off-by: NUri Lublin <uril@qumranet.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Since dirty_bitmap is an unsigned long array, the alignment and size need
to take that into account.
Signed-off-by: NUri Lublin <uril@qumranet.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

A few places where we modify guest memory fail to call mark_page_dirty(),
causing live migration to fail.  This adds the missing calls.
Signed-off-by: NUri Lublin <uril@qumranet.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>