- 08 6月, 2010 1 次提交
-
-
由 Dave Airlie 提交于
(regression fix since fbdev/kms rework). My fb rework didn't remember about the 84/65s. Reported-by: NOndrej Zary <linux@rainbow-software.org> Tested-by: NOndrej Zary <linux@rainbow-software.org> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 06 6月, 2010 1 次提交
-
-
由 Chris Wilson 提交于
Cursors need to be in the GTT domain when being accessed by the GPU. Previously this was a fortuitous byproduct of userspace using pwrite() to upload the image data into the cursor. The redundant clflush was removed in commit 9b8c4a and so the image was no longer being flushed out of the caches into main memory. One could also devise a scenario where the cursor was rendered by the GPU, prior to being attached as the cursor, resulting in similar corruption due to the missing MI_FLUSH. Fixes: Bug 28335 - Cursor corruption caused by commit 9b8c4a0b https://bugs.freedesktop.org/show_bug.cgi?id=28335Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Reported-and-tested-by: NJeff Chua <jeff.chua.linux@gmail.com> Tested-by: NLinus Torvalds <torvalds@linux-foundation.org> Reported-by: NAndy Isaacson <adi@hexapodia.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 03 6月, 2010 9 次提交
-
-
由 Alex Deucher 提交于
Disable the display hw when suspending. Should fix bug: https://bugzilla.redhat.com/show_bug.cgi?id=522393Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Jakob Bornecrantz 提交于
The host may change the layout and, since the change is communicated to the master, the master needs a way to communicate the change to the kernel driver. The minor version number is bumped to advertize the availability of this feature. Signed-off-by: NJakob Bornecrantz <jakob@vmware.com> Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Jakob Bornecrantz 提交于
Must set SVGA_NUM_REG_GUEST_DISPLAY before setting up the display information. Signed-off-by: NJakob Bornecrantz <jakob@vmware.com> Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Thomas Hellstrom 提交于
vga save / restore previously didn't handle the display topology case. Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
- Enable GPIO voltage for non pm modes as well so resetting the default voltage works. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
- wait for vbl for both profile and dynpm - unify profile and dynpm code paths more - call pm_misc before of after clocks to make sure voltage is changed in the proper order. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
The default power state does not always match the default clocks and voltage for a particular card. The information in the firmware info table is correct and should be used in preference to the info the default power state. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
I missed these in the r6xx commit. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
- This enables voltage adjustment on r6xx+ and certain r5xx asics. - Voltage drop support is already available for most r1xx-r5xx asics. V2: endian fix for voltage table. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 02 6月, 2010 2 次提交
-
-
由 Zou Nan hai 提交于
This will let userland only try to use the new media decode functionality when the appropriate kernel is present. Signed-off-by: NZou Nan hai <nanhai.zou@intel.com> Signed-off-by: NEric Anholt <eric@anholt.net>
-
由 Adam Jackson 提交于
I'm actually kind of shocked that it works at all otherwise. Signed-off-by: NAdam Jackson <ajax@redhat.com> Signed-off-by: NEric Anholt <eric@anholt.net>
-
- 01 6月, 2010 20 次提交
-
-
由 Alex Deucher 提交于
Advanced validation is not implemented yet. The mesa code that uses this will be released soon. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
Because we aren't in a suspend state the poll will still run when we have switcherooed a card off. Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
This fixes the DSM setup correctly since vga switcheroo. Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
Some of the laptops with the switchable graphics, seem to not post the secondary GPU at all, and we can't find a copy of the BIOS anywhere except in the ACPI rom retrieval. This adds support for ACPI ROM retrieval to nouveau. Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Thomas Hellstrom 提交于
Fix a number of typos misspellings and checkpatch.pl warnings. Replace "[ttm] " with TTM_PFX Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Thomas Hellstrom 提交于
This patch fixes a regression introduced with the pool page allocator in the event that there are no highmem pages (for example x86_64), in which case cached page allocation would fail. Tested with the vmwgfx driver on a 64-bit vm. Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Thomas Hellstrom 提交于
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Jakob Bornecrantz 提交于
Signed-off-by: NJakob Bornecrantz <jakob@vmware.com> Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Jakob Bornecrantz 提交于
The unpause codepath uses vmw_overlay_update() so we must unset the paused status. Signed-off-by: NJakob Bornecrantz <jakob@vmware.com> Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Jakob Bornecrantz 提交于
Signed-off-by: NJakob Bornecrantz <jakob@vmware.com> Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Jakob Bornecrantz 提交于
We should not use SVGA_REG_ENABLE anywhere but in the fifo setup code, since it controls whether the device is active. Signed-off-by: NJakob Bornecrantz <jakob@vmware.com> Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Jakob Bornecrantz 提交于
Signed-off-by: NJakob Bornecrantz <jakob@vmware.com> Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Thomas Hellstrom 提交于
The host may be touching this part of VRAM at modesetting, even if we never use it ourselves, since we blit screen updates from 3D surfaces. Make sure no DMA buffers are placed in this part of VRAM. V2: Fix an error check in vmw_surface_dmabuf_pin(). Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com> Signed-off-by: NJakob Bornecrantz <jakob@vmware.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Jakob Bornecrantz 提交于
V2: Fix a couple of typos. Signed-off-by: NJakob Bornecrantz <jakob@vmware.com> Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Jakob Bornecrantz 提交于
Also make sure the ldu::active member is properly initialized. Part of fix by Michel Daenzer <daenzer@vmware.com>. Signed-off-by: NJakob Bornecrantz <jakob@vmware.com> Signed-off-by: NMichel Daenzer <daenzer@vmware.com> Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Thomas Hellstrom 提交于
The throttle_us member in the execbuf argument is now honored. If the member is 0, no waiting for lag will occur, which guarantees backwards compatibility with well-behaved clients. Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Jakob Bornecrantz 提交于
Signed-off-by: NJakob Bornecrantz <jakob@vmware.com> Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Jakob Bornecrantz 提交于
V2: Fix a typo. Signed-off-by: NJakob Bornecrantz <jakob@vmware.com> Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Jakob Bornecrantz 提交于
Signed-off-by: NJakob Bornecrantz <jakob@vmware.com> Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 29 5月, 2010 7 次提交
-
-
由 Dave Airlie 提交于
airlied -> brown paper bag. I blame Hi-5 or the Wiggles for lowering my IQ, move the fix inside some brackets instead of breaking everything in site. Cc: stable@kernel.org Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Zhenyu Wang 提交于
With splitted engines on Sandybridge, each engine has its own interrupt control as well. This unmasks the interrupt to properly enable pipe control notify event for render engine. Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: NEric Anholt <eric@anholt.net>
-
由 Zhenyu Wang 提交于
Sandybridge(Gen6) has new format for PIPE_CONTROL command, the flush and post-op control are in dword 1 now. This changes command length field for difference between Ironlake and Sandybridge. I tried to test this with noop request and issue PIPE_CONTROL command for each sequence and track notify interrupts, which seems work fine. Hopefully we don't need workaround like on Ironlake for Sandybridge. Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: NEric Anholt <eric@anholt.net>
-
由 Chris Wilson 提交于
Since we now get_user_pages() outside of the mutex prior to performing the copy, we kmap() the page inside the copy routine and so need to perform an ordinary memcpy() and not copy_from_user(). Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Signed-off-by: NEric Anholt <eric@anholt.net>
-
由 Chris Wilson 提交于
As we do not have a requirement to be atomic and avoid sleeping whilst performing the slow copy for shmem based pread and pwrite, we can use kmap instead, thus simplifying the code. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Signed-off-by: NEric Anholt <eric@anholt.net>
-
由 Chris Wilson 提交于
We can avoid an early clflush when pwriting if we use the current CPU write domain rather than moving the object to the GTT domain for the purposes of the pwrite. This has the advantage of not flushing the presumably hot data that we want to upload into the bo, and of ascribing the clflush to the execution when profiling. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Signed-off-by: NEric Anholt <eric@anholt.net>
-
由 Chris Wilson 提交于
The callers expect us to cleanup any partially initialised structures before reporting the error. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Signed-off-by: NEric Anholt <eric@anholt.net>
-