The crypto node now contains a new property 'fsl,sec-era'.
This is required so that applications can retrieve era info without
having to be able to read SEC's register space.
Signed-off-by: NVakul Garg <vakul@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Removing qoriq-sec4.1-0.dtsi as it is not used by any soc anymore.
Signed-off-by: NVakul Garg <vakul@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Signed-off-by: NShaveta Leekha <shaveta@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

- Add support for B4 board in board file b4_qds.c,
  It is common for B4860, B4420 and B4220QDS as they share same QDS board
- Add B4QDS support in Kconfig and Makefile

B4860QDS is a high-performance computing evaluation, development and
test platform supporting the B4860 QorIQ Power Architecture processor,
with following major features:

    - Four dual-threaded e6500 Power Architecture processors
      organized in one cluster-each core runs up to 1.8 GHz
    - Two DDR3/3L controllers for high-speed memory interface each
      runs at up to 1866.67 MHz
    - CoreNet fabric that fully supports coherency using MESI protocol
      between the e6500 cores, SC3900 FVP cores, memories and
      external interfaces.
    - Data Path Acceleration Architecture having FMAN, QMan, BMan,
      SEC 5.3 and RMAN
    - Large internal cache memory with snooping and stashing capabilities
    - Sixteen 10-GHz SerDes lanes that serve:
        - Two SRIO interfaces. Each supports up to 4 lanes and
          a total of up to 8 lanes
        - Up to 8-lanes Common Public Radio Interface (CPRI) controller
          for glue-less antenna connection
        - Two 10-Gbit Ethernet controllers (10GEC)
        - Six 1G/2.5-Gbit Ethernet controllers for network communications
        - PCI Express controller
        - Debug (Aurora)
    - Various system peripherals

B4420 and B4220 have some differences in comparison to B4860 with fewer
core/clusters(both SC3900 and e6500), fewer DDR controllers,
fewer serdes lanes, fewer SGMII interfaces and reduced target frequencies.

Key differences between B4860 and B4420:
B4420 has:
    - Fewer e6500 cores:
        1 cluster with 2 e6500 cores
    - Fewer SC3900 cores/clusters:
        1 cluster with 2 SC3900 cores per cluster
    - Single DDRC @ 1.6GHz
    - 2 X 4 lane serdes
    - 3 SGMII interfaces
    - no sRIO
    - no 10G

Key differences between B4860 and B4220:
B4220 has:
    - Fewer e6500 cores:
        1 cluster with 1 e6500 core
    - Fewer SC3900 cores/clusters:
        1 cluster with 2 SC3900 cores per cluster
    - Single DDRC @ 1.33GHz
    - 2 X 2 lane serdes
    - 2 SGMII interfaces
    - no sRIO
    - no 10G
Signed-off-by: NShaveta Leekha <shaveta@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

B4860QDS and B4420QDS share same QDS board

* common board features have been added in b4qds.dts
* various board differences are in respective files of B4860 and B4420
Signed-off-by: NShaveta Leekha <shaveta@freescale.com>
Signed-off-by: NMinghuan Lian <Minghuan.Lian@freescale.com>
Signed-off-by: NAndy Fleming <afleming@freescale.com>
Signed-off-by: NPoonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: NRamneek Mehresh <ramneek.mehresh@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

B4860 and B4420 are similar that share some commonalities

* common features have been added in b4si-pre.dtsi and b4si-post.dtsi
* differences are added in respective silicon files of B4860 and B4420

There are several things missing from the device trees of B4860 and B4420:

* DPAA related nodes (Qman, Bman, Fman, Rman)
* DSP related nodes/information
* serdes, sfp(security fuse processor), thermal,
  gpio, maple, cpri, quad timers nodes
Signed-off-by: NShaveta Leekha <shaveta@freescale.com>
Signed-off-by: NZhao Chenhui <chenhui.zhao@freescale.com>
Signed-off-by: NLi Yang <leoli@freescale.com>
Signed-off-by: NTang Yuantian <Yuantian.Tang@freescale.com>
Signed-off-by: NVarun Sethi <Varun.Sethi@freescale.com>
Signed-off-by: NMinghuan Lian <Minghuan.Lian@freescale.com>
Signed-off-by: NRamneek Mehresh <ramneek.mehresh@freescale.com>
Signed-off-by: NAndy Fleming <afleming@freescale.com>
Signed-off-by: NVakul Garg <vakul@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Up to now the PCIe link status on Freescale PCIe controllers was only
checked once at boot time. So hotplug did not work. With this patch the
link status is checked on every config read. PCIe devices not present at
boot time are found after doing 'echo 1 >/sys/bus/pci/rescan'.
Signed-off-by: NRojhalat Ibrahim <imr@rtschenk.de>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Move to keeping the SoC registers that control and config the PCI
controllers on FSL SoCs in the pci_controller struct.  This allows us to
not need to ioremap() the registers in multiple different places that
use them.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

The last users of Kconfig symbol MPC10X_OPENPIC were removed in v2.6.27.
Its Kconfig entry can be removed now.
Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

* Fix cpu unit address to match reg
* Update compatible for rcpm & clockgen to be 2.0 instead of 2
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

mpic_reset_core() need a logical cpu number instead of physical.
Signed-off-by: NZhao Chenhui <chenhui.zhao@freescale.com>
Signed-off-by: NLi Yang <leoli@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

lockdep thinks that it might deadlock because it grabs a lock of the
same class while calling the generic_irq_handler(). This annotation will
inform lockdep that it will not.
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Signed-off-by: NVakul Garg <vakul@freescale.com>
Signed-off-by: NShaveta Leekha <shaveta@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

The size might be 64 bit, so use ilog2() instead of __ilog2() or
__ilog2_u64().

ilog2() can select 32bit or 64bit function automatically.
Signed-off-by: NRoy Zang <tie-fei.zang@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Somehow the driver snuck in with these still in it.
Signed-off-by: NBen Collins <ben.c@servergy.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

As the T4240 is based on corenet chassis v2.0 spec we update the global
utilities (GUTS) device config compatiable to reflect this.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Identifies the epu as compatible with Chassis v1 Debug IP.
Signed-off-by: NStephen George <Stephen.George@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Signed-off-by: NStephen George <Stephen.George@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Add CONFIG(s) required for NAND and NOR flash controller usage.
It defines MTD, Jffs2 and UBIFS file system required for controllers.

It also enables IFC controller
Signed-off-by: NPrabhakar Kushwaha <prabhakar@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Commit 193ab2a6 changed the USB gadget
Kconfig symbol from USB_GADGET_FSL_QE to USB_FSL_QE, but did not update
the associated symbol name in qe_lib to match.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

mpc85xx_pci_err_probe(struct platform_device *op) need platform_device
declaration for definition. Otherwise, it will cause compile error if any
files including fsl_pci.h without declaration of platform_device.
Signed-off-by: NJia Hongtao <hongtao.jia@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

The last user of Kconfig symbol 8260_PCI9 got removed in release v3.2.
Remove this symbol too.
Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

E1000 NIC is a common used Ethernet card. Enable it as default
for mpc85xx platform.

other change is due to make savedefconfig
Reported-by: NFu Jiwei <b36666@freescale.com>
Signed-off-by: NRoy Zang <tie-fei.zang@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Signed-off-by: NStuart Yoder <stuart.yoder@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

This is a commonly used ethernet card, especially with mainline kernels
which lack datapath support.
Signed-off-by: NScott Wood <scottwood@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Config FSL_SOC does not depend on PPC_CLOCK anymore since the following
commit got merged: 93abe8e4 (clk: add non CONFIG_HAVE_CLK routines)
Config CPM does not use PPC_CLOCK either currently. So remove them.

PPC_CLOCK also keeps Freescale PowerPC archtecture from supporting COMMON_CLK.
Signed-off-by: NTang Yuantian <Yuantian.Tang@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Due to the partition of JFFS2 overlaps with QE ucode firmware, So JFFS2
will break QE ucode. Shrink JFFS2's partition to reserve the space of
QE ucode firmware.
Signed-off-by: NJiucheng Xu <Jiucheng.Xu@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Add first usb controller node for qonverge qoriq platforms like
B4860, etc
Signed-off-by: NRamneek Mehresh <ramneek.mehresh@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

* Add support for up to 24 cores on T4240 (includes threads)
* Enable AltiVec support (on T4240)
* Add T4240QDS board into build
* Other changes are due to general kernel update of defconfig
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Some minor changes to the common corenet_ds.c code are needed to support
the T4240QDS:
* Add support for "fsl,qoriq-pcie-v3.0" controller
* Bump max # of IRQs to 512 (T4240 supports more interrupts than
  previous SoCs).
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Signed-off-by: NMinghuan Lian <Minghuan.Lian@freescale.com>
Signed-off-by: NRoy Zang <tie-fei.zang@freescale.com>
Signed-off-by: NPrabhakar Kushwaha <prabhakar@freescale.com>
Signed-off-by: NAndy Fleming <afleming@freescale.com>
Signed-off-by: NShaohui Xie <Shaohui.Xie@freescale.com>
Signed-off-by: NPrabhakar Kushwaha <prabhakar@freescale.com>
Signed-off-by: NScott Wood <scottwood@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Enable a baseline T4240 SoC to boot.  There are several things missing
from the device trees for T4240:

* Proper PAMU topology information
* DPAA related nodes (Qman, Bman, Fman, Rman, DCE)
* Prefetch Manager
* Thermal monitor unit
* Interlaken
Signed-off-by: NRoy Zang <tie-fei.zang@freescale.com>
Signed-off-by: NMinghuan Lian <Minghuan.Lian@freescale.com>
Signed-off-by: NHaiying Wang <Haiying.Wang@freescale.com>
Signed-off-by: NAndy Fleming <afleming@freescale.com>
Signed-off-by: NPrabhakar Kushwaha <prabhakar@freescale.com>
Signed-off-by: NYork Sun <yorksun@freescale.com>
Signed-off-by: NVakul Garg <vakul@freescale.com>
Signed-off-by: NTang Yuantian <Yuantian.Tang@freescale.com>
Signed-off-by: NZhao Chenhui <chenhui.zhao@freescale.com>
Signed-off-by: NLi Yang <leoli@freescale.com>
Signed-off-by: NRamneek Mehresh <ramneek.mehresh@freescale.com>
Signed-off-by: NLaurentiu Tudor <Laurentiu.Tudor@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

The e6500 core adds support for AltiVec on a Book-E class processor.
Connect up all the various exception handling code and build config
mechanisms to allow user spaces apps to utilize AltiVec.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

The e6500 core used on T4240 and B4860 SoCs from FSL implements MMUv2 of
the Power Book-E Architecture.  However there are some minor differences
between it and other Book-E implementations.

Add support to parse SPRN_TLB1PS for the variable page sizes supported.
In the future this should be expanded for more page sizes supported on
e6500 as well as other MMU features.

This patch is based on code from Scott Wood.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

The T4240 utilizes a new PCIe controller block that has some minor
programming model differences from previous versions.

The major one that impacts initialization is how we determine the link
state.  On the 3.x controllers we have a memory mapped SoC register
instead of a PCI config register that reports the link state.
Signed-off-by: NRoy Zang <tie-fei.zang@freescale.com>
Signed-off-by: NAndy Fleming <afleming@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Add device tree for SEC (crypto engine) version 5.0 used on T4240.
Signed-off-by: NVakul Garg <vakul@freescale.com>
Signed-off-by: NAndy Fleming <afleming@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Signed-off-by: NStuart Yoder <stuart.yoder@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

-also define a binding for fsl,eref-* properties
Signed-off-by: NStuart Yoder <stuart.yoder@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

We support DSCR (Data Stream Control Register) so we should make sure we set it
in the FSCR (Facility Status & Control Register) incase some firmwares don't
set it.  If we don't set this, we'll take a facility unavailable exception when
using the DSCR.
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

This sets the DSCR (Data Stream Control Register) in the FSCR (Facility Status
& Control Register).

Also harmonise TAR (Target Address Register) FSCR bit definition too.
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>