- 25 4月, 2006 16 次提交
-
-
由 Pavel Roskin 提交于
Use skb_pull() to strip the addresses from the original packet. Don't strip protocol bytes. Signed-off-by: NPavel Roskin <proski@gnu.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Pavel Roskin 提交于
The result of orinoco_xmit() can be OK, dropped packet and busy transmitter. Rename labels accordingly. Increment stats->tx_errors in one place. Increment stats->tx_dropped - nobody is doing it for us. Signed-off-by: NPavel Roskin <proski@gnu.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Pavel Roskin 提交于
hermes_bap_pwrite() supports odd-sized packets now. There is no minimal packet size for 802.11. Also, hermes_bap_pwrite() supports odd-sized packets now. This removes all reasons to pad the Tx data. Signed-off-by: NPavel Roskin <proski@gnu.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Pavel Roskin 提交于
The new function can write an odd number of bytes, thus making padding unnecessary. Signed-off-by: NPavel Roskin <proski@gnu.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Pavel Roskin 提交于
Don't ever return -errno from orinoco_xmit() - the network layer doesn't expect it. Signed-off-by: NPavel Roskin <proski@gnu.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Pavel Roskin 提交于
When processing Tx exception, only read data until addr1. Rename hermes_tx_descriptor_802_11 to hermes_txexc_data since it's only used to Tx exceptions. Reuse existing hermes_tx_descriptor structure. Remove fields after addr1 - they are not read from the card. Signed-off-by: NPavel Roskin <proski@gnu.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Pavel Roskin 提交于
Signed-off-by: NPavel Roskin <proski@gnu.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Pavel Roskin 提交于
Signed-off-by: NPavel Roskin <proski@gnu.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Pavel Roskin 提交于
Signed-off-by: NPavel Roskin <proski@gnu.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Pavel Roskin 提交于
Sparse is much better at finding endianess issues than such visual cues. Signed-off-by: NPavel Roskin <proski@gnu.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Pavel Roskin 提交于
Signed-off-by: NPavel Roskin <proski@gnu.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Pavel Roskin 提交于
The PCMCIA drivers would never be loaded if the CIS were wrong. No other PCMCIA drivers validate CIS. Signed-off-by: NPavel Roskin <proski@gnu.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Buesch 提交于
This patch fixes PIO mode on the softmac bcm43xx driver. (A dscape patch will follow). It mainly fixes endianess issues. This patch is tested on PowerPC32 and i386. Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Buesch 提交于
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
There are some bugs in the current implementation of the SIOCSIWAP wext, for example that when you do it twice and it fails, it may still try another access point for some reason. This patch fixes this by introducing a new flag that tells the association code that the bssid that is in use was fixed by the user and shouldn't be deviated from. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Pavel Roskin 提交于
The original code was doing arithmetics on a little-endian value. Reported by Stelios Koroneos <stelios@stelioscellar.com> Signed-off-by: NPavel Roskin <proski@gnu.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 24 4月, 2006 5 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6: [PARISC] MAINTAINERS [PARISC] Make ioremap default to _nocache [PARISC] Add new entries to the syscall table [PARISC] Further work for multiple page sizes [PARISC] Fix up hil_kbd.c mismerge [PARISC] defconfig updates [PARISC] Document that we tolerate "Relaxed Ordering" [PARISC] Misc. janitorial work [PARISC] EISA regions must be mapped NO_CACHE [PARISC] OSS ad1889: Match register names with ALSA driver
-
git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-fixes-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-fixes-2.6: [PATCH] pcmcia/pcmcia_resource.c: fix crash when using Cardbus cards [PATCH] vrc4171: update config [PATCH] pcmcia: fix oops in static mapping case [PATCH] pcmcia: remove unneeded forward declarations [PATCH] pcmcia: do not set dev_node to NULL too early [PATCH] pcmcia: fix comment for pcmcia_load_firmware [PATCH] pcmcia: unload second device first [PATCH] pcmcia: add new ID to pcnet_cs
-
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6由 Linus Torvalds 提交于
* 'drm-patches' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm: possible cleanups drm: fixup r300 scratch on BE machines
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/sfrench/cifs-2.6-stable: [CIFS] Fix typo in previous [CIFS] Readdir fixes to allow search to start at arbitrary position [CIFS] Use the kthread_ API instead of opencoding lots of hairy code for kernel [CIFS] Don't allow a backslash in a path component [CIFS] [CIFS] Do not take rename sem on most path based calls (during
-
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc-merge由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc-merge: powerpc: Fix define_machine so machine_is() works from modules powerpc/ppc: export strncasecmp [PATCH] powerpc: fix oops in alsa powermac driver [PATCH] powerpc: update {g5,iseries,pseries}_defconfigs [PATCH] ppc: Fix powersave code on arch/ppc [PATCH] powerpc/cell: remove BUILD_BUG_ON and add sys_tee to spu_syscall_table [PATCH] powermac: Fix i2c on keywest based chips [PATCH] powerpc: Lower threshold for DART enablement to 1GB [PATCH] powerpc: IOMMU support for honoring dma_mask
-
- 23 4月, 2006 19 次提交
-
-
由 Dave Airlie 提交于
This patch contains the following possible cleanups: - make the following needlessly global function static: - drm_bufs.c: drm_addbufs_fb() - remove the following unused EXPORT_SYMBOL's: - drm_agpsupport.c: drm_agp_bind_memory - drm_bufs.c: drm_rmmap_locked - drm_bufs.c: drm_rmmap - drm_stub.c: drm_get_dev Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NDave Airlie <airlied@linux.ie>
-
由 Dave Airlie 提交于
This fixes the r300 scratch stuff to work on PPC, from Ben Herrenschmidt on IRC. Signed-off-by: NDave Airlie <airlied@linux.ie>
-
由 Steve French 提交于
Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Paul Mackerras 提交于
machine_is() was always returning 0 when used in a module, because we weren't exporting the machine definitions. This was why sound wasn't working on powermacs when CONFIG_SND_POWERMAC=m. Original fix from Ben Herrenschmidt, further fixed by me. Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Kylene Jo Hall 提交于
I recently found that not all BIOS manufacturers are using the specified generic PNP id in their TPM ACPI table entry. I have added the vendor specific IDs that I know about and added a module parameter that a user can specify another HID to the probe list if their device isn't being found by the default list. Signed-off-by: NKylene Hall <kjhall@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Kylene Jo Hall 提交于
This patch adds a boolean module parameter that allows the user to turn interrupt support on and off. The default behavior is to attempt to use interrupts. Signed-off-by: NKylene Hall <kjhall@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Kylene Jo Hall 提交于
Fixes minor spacing issues. Signed-off-by: NKylene Hall <kjhall@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Randy Dunlap 提交于
Use __devexit_p() for the exit/remove function to protect against discarding it. WARNING: drivers/char/tpm/tpm_infineon.o - Section mismatch: reference to .exit.text:tpm_inf_pnp_remove from .data between 'tpm_inf_pnp' (at offset 0x20) and 'tpm_inf' Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Cc: Kylene Jo Hall <kjhall@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Kylene Jo Hall 提交于
The acpi table which contains the BIOS log events was updated for 1.2. There are now client and server modes as defined in the specifications with slightly different formats. Additionally, the start field was even too small for the 1.1 version but had been working anyway. This patch updates the code to deal with any of the three types of headers probperly (1.1, 1.2 client and 1.2 server). Signed-off-by: NKylie Hall <kjhall@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Kylene Jo Hall 提交于
The memory start and length values obtained from the ACPI entry need to be checked and filled in with the default values from the specification if they don't exist. This patch fills in the default values and uses them appropriately. Signed-off-by: NKylie Hall <kjhall@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Marcel Selhorst 提交于
Apply the latest changes in the TPM interface to the Infineon TPM-driver. Signed-off-by: NMarcel Selhorst <selhorst@crypto.rub.de> Acked-by: NKylie Hall <kjhall@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Kylene Jo Hall 提交于
Use set_bit() and clear_bit() for dev_mask manipulation. Signed-off-by: NKylie Hall <kjhall@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Kylene Jo Hall 提交于
The timeout and duration values used in the tpm driver are not exposed to userspace. This patch converts the storage units to jiffies with msecs_to_jiffies. They were always being used in jiffies so this simplifies things removing the need for calculation all over the place. The change necessitated a type change in the tpm_chip struct to hold jiffies. Signed-off-by: NKylie Hall <kjhall@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Leendert van Doorn 提交于
The driver for the next generation of TPM chips version 1.2 including support for interrupts. The Trusted Computing Group has written the TPM Interface Specification (TIS) which defines a common interface for all manufacturer's 1.2 TPM's thus the name tpm_tis. Signed-off-by: NLeendert van Doorn <leendert@watson.ibm.com> Signed-off-by: NKylene Hall <kjhall@us.ibm.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Kylene Jo Hall 提交于
Many of the sysfs files were calling the TPM_GetCapability command with array. Since for 1.2 more sysfs files of this type are coming I am generalizing the array so there can be one array and the unique parts can be filled in just before the command is called. This updated version of the patch breaks the multi-value sysfs file into separate files pointed out by Greg. It also addresses the code redundancy and ugliness in the tpm_show_* functions pointed out on another patch by Dave Hansen. Signed-off-by: NKylene Hall <kjhall@us.ibm.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Kylene Jo Hall 提交于
With the TPM 1.2 Specification, each command is classified as short, medium or long and the chip tells you the maximum amount of time for a response to each class of command. This patch provides and array of the classifications and a function to determine how long the response should be waited for. Also, it uses that information in the command processing to determine how long to poll for. The function is exported so the 1.2 driver can use the functionality to determine how long to wait for a DataAvailable interrupt if interrupts are being used. Signed-off-by: NKylene Hall <kjhall@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Kylene Jo Hall 提交于
Changes in the 1.2 TPM Specification make it necessary to update some fields of the chip structure in the initialization function after it is registered with tpm.c thus tpm_register_hardware was modified to return a pointer to the structure. This patch makes that change and the associated changes in tpm_atmel and tpm_nsc. The changes to tpm_infineon will be coming in a patch from Marcel Selhorst. Signed-off-by: NKylene Hall <kjhall@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Kylene Jo Hall 提交于
To assist with chip management and better support the possibility of having multiple TPMs in the system of the same kind, the struct tpm_vendor_specific member of the tpm_chip was changed from a pointer to an instance. This patch changes that declaration and fixes up all accesses to the structure member except in tpm_infineon which is coming in a patch from Marcel Selhorst. Signed-off-by: NKylene Hall <kjhall@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Kylene Jo Hall 提交于
Many of the sysfs files were calling the TPM_GetCapability command with array. Since for 1.2 more sysfs files of this type are coming I am generalizing the array so there can be one array and the unique parts can be filled in just before the command is called. Signed-off-by: NKylene Hall <kjhall@us.ibm.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-