Signed-off-by: NKevin Corry <kevcorry@us.ibm.com>
Cc: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Convert bd_sem to bd_mutex
Signed-off-by: NJun'ichi Nomura <j-nomura@ce.jp.nec.com>
Cc: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Use bd_claim_by_disk.

Following symlinks are created if dm-0 maps to sda:
  /sys/block/dm-0/slaves/sda --> /sys/block/sda
  /sys/block/sda/holders/dm-0 --> /sys/block/dm-0
Signed-off-by: NJun'ichi Nomura <j-nomura@ce.jp.nec.com>
Cc: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Use bd_claim_by_disk.

Following symlinks are created if md0 is built from sda and sdb
  /sys/block/md0/slaves/sda --> /sys/block/sda
  /sys/block/md0/slaves/sdb --> /sys/block/sdb
  /sys/block/sda/holders/md0 --> /sys/block/md0
  /sys/block/sdb/holders/md0 --> /sys/block/md0
Signed-off-by: NJun'ichi Nomura <j-nomura@ce.jp.nec.com>
Cc: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Adding bd_claim_by_kobject() function which takes kobject as additional
signature of holder device and creates sysfs symlinks between holder device
and claimed device.  bd_release_from_kobject() is a counterpart of
bd_claim_by_kobject.
Signed-off-by: NJun'ichi Nomura <j-nomura@ce.jp.nec.com>
Cc: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Remove all the CONFIG_SYSFS stuff.  That's supposed to all be implemented up
in header files.

Yes, the CONFIG_SYSFS=n data structures will be a little larger than
necessary, but that's a tradeoff we can decide to make.

Cc: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Cc: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Creating "slaves" and "holders" directories in /sys/block/<disk> and
creating "holders" directory under /sys/block/<disk>/<partition>
Signed-off-by: NJun'ichi Nomura <j-nomura@ce.jp.nec.com>
Cc: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Allow drive geometry to be stored with a new DM_DEV_SET_GEOMETRY ioctl.
Device-mapper will now respond to HDIO_GETGEO.  If the geometry information is
not available, zero will be returned for all of the parameters.
Signed-off-by: NDarrick J. Wong <djwong@us.ibm.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Store an up-pointer to the owning struct mapped_device in every table when it
is created.

Access it with:
  struct mapped_device *dm_table_get_md(struct dm_table *t)

Tables linked to md must be destroyed before the md itself.
Signed-off-by: NMike Anderson <andmike@us.ibm.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Change dm_get_mdptr() to take a struct mapped_device instead of dev_t.
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The patch stores a printable device number in struct mapped_device for use in
warning messages and with a proposed netlink interface.
Signed-off-by: NMike Anderson <andmike@us.ibm.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

If dm_suspend() is cancelled, bios already added to the deferred list need to
be submitted.  Otherwise they remain 'in limbo' until there's a dm_resume().
Signed-off-by: NJun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Before removing a snapshot, wait for the completion of any kcopyd jobs using
it.

Do this by maintaining a count (nr_jobs) of how many outstanding jobs each
kcopyd_client has.

The snapshot destructor first unregisters the snapshot so that no new kcopyd
jobs (created by writes to the origin) will reference that particular
snapshot.  kcopyd_client_destroy() is now run next to wait for the completion
of any outstanding jobs before the snapshot exception structures (that those
jobs reference) are freed.
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This flag should be set for a virtual device iff it is set for all
underlying devices.
Signed-off-by: NNeil Brown <neilb@suse.de>
Acked-by: NAlasdair G Kergon <agk@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

We don't know what type sector_t has.  Sometimes it's unsigned long, sometimes
it's unsigned long long.  For example on ppc64 it's unsigned long with
CONFIG_LBD=n and on x86_64 it's unsigned long long with CONFIG_LBD=n.

The way to handle all of this is to always use unsigned long long and to
always typecast the sector_t when printing it.
Acked-by: NAlasdair G Kergon <agk@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

dm-mirror has potential data corruption problem: while on-disk log shows
that all disk contents are in-sync, actual contents of the disks are not
synchronized.  This problem occurs if initial recovery (synching) is
interrupted and resumed.

Attached patch fixes this problem.

Background:

rh_dec() changes the region state from RH_NOSYNC (out-of-sync) to RH_CLEAN
(in-sync), which results in the corresponding bit of clean_bits being set.

This is harmful if on-disk log is used and the map is removed/suspended
before the initial sync is completed.  The clean_bits is written down to
the on-disk log at the map removal, and, upon resume, it's read and copied
to sync_bits.  Since the recovery process refers to the sync_bits to find a
region to be recovered, the region whose state was changed from RH_NOSYNC
to RH_CLEAN is no longer recovered.

If you haven't applied dm-raid1-read-balancing.patch proposed in dm-devel
sometimes ago, the contents of the mirrored disk just corrupt silently.  If
you have, balanced read may get bogus data from out-of-sync disks.

The patch keeps RH_NOSYNC state unchanged.  It will be changed to
RH_RECOVERING when recovery starts and get reclaimed when the recovery
completes.  So it doesn't leak the region hash entry.

Description:

Keep RH_NOSYNC state unchanged when I/O on the region completes.

rh_dec() changes the region state from RH_NOSYNC (out-of-sync) to RH_CLEAN
(in-sync), which results in the corresponding bit of clean_bits being set.

This is harmful if on-disk log is used and the map is removed/suspended
before the initial sync is completed.  The clean_bits is written down to
the on-disk log at the map removal, and, upon resume, it's read and copied
to sync_bits.  Since the recovery process refers to the sync_bits to find a
region to be recovered, the region whose state was changed from RH_NOSYNC
to RH_CLEAN is no longer recovered.

If you haven't applied dm-raid1-read-balancing.patch proposed in dm-devel
sometimes ago, the contents of the mirrored disk just corrupt silently.  If
you have, balanced read may get bogus data from out-of-sync disks.

The RH_NOSYNC region will be changed to RH_RECOVERING when recovery starts
on the region and get reclaimed when the recovery completes.  So it doesn't
leak the region hash entry.

Alasdair said:

  I've analysed the relevant part of the state machine and I believe that
  the patch is correct.

  (Further work on this code is still needed - this patch has the
  side-effect of holding onto memory unnecessarily for long periods of time
  under certain workloads - but better that than corrupting data.)
Signed-off-by: NJun'ichi Nomura <j-nomura@ce.jp.nec.com>
Acked-by: NAlasdair G Kergon <agk@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

When a snapshot becomes invalid, s->valid is set to 0.  In this state, a
snapshot can no longer be accessed.

When s->lock is acquired, before doing anything else, s->valid must be checked
to ensure the snapshot remains valid.

This patch eliminates some races (that may cause panics) by adding some
missing checks.  At the same time, some unnecessary levels of indentation are
removed and snapshot invalidation is moved into a single function that always
generates a device-mapper event.
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The siblings "list" is used unsafely at the moment.

Firstly, only the element on the list being changed gets locked (via the
snapshot lock), not the next and previous elements which have pointers that
are also being changed.

Secondly, if you have two or more snapshots and write to the same chunk a
second time before every snapshot has finished making its private copy of the
data, if you're unlucky, _origin_write() could attempt its list_merge() and
dereference a 'last' pointer to a pending_exception structure that has just
been freed.

Analysis reveals that the list is actually only there for reference counting.
If 5 pending_exceptions are needed in origin_write, then the 5 are joined
together into a 5-element list - without a separate list head because there's
nowhere suitable to store it.  As the pending_exceptions complete, they are
removed from the list one-by-one and any contents of origin_bios get moved
across to one of the remaining pending_exceptions on the list.  Whichever one
is last is detected because list_empty() is then true and the origin_bios get
submitted.

The fix proposed here uses an alternative reference counting mechanism by
choosing one of the pending_exceptions as primary and maintaining an atomic
counter there.
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Say you have several snapshots of the same origin and then you issue a write
to some place in the origin for the first time.

Before the device-mapper snapshot target lets the write go through to the
underlying device, it needs to make a copy of the data that is about to be
overwritten.  Each snapshot is independent, so it makes one copy for each
snapshot.

__origin_write() loops through each snapshot and checks to see whether a copy
is needed for that snapshot.  (A copy is only needed the first time that data
changes.)

If a copy is needed, the code allocates a 'pending_exception' structure
holding the details.  It links these together for all the snapshots, then
works its way through this list and submits the copying requests to the kcopyd
thread by calling start_copy().  When each request is completed, the original
pending_exception structure gets freed in pending_complete().

If you're very unlucky, this structure can get freed *before* the submission
process has finished walking the list.

This patch:

  1) Creates a new temporary list pe_queue to hold the pending exception
     structures;

  2) Does all the bookkeeping up-front, then walks through the new list
     safely and calls start_copy() for each pending_exception that needed it;

  3) Avoids attempting to add pe->siblings to the list if it's already
     connected.

[NB This does not fix all the races in this code.  More patches will follow.]
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The Coverity checker spotted these two unused variables.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Thomas Winischhofer <thomas@winischhofer.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Use ARRAY_SIZE macro instead of sizeof(x)/sizeof(x[0]) and remove
duplicates of ARRAY_SIZE.  Some coding style and trailing whitespaces are
also fixed.

Compile-tested where possible (some are other arch or BROKEN)
Signed-off-by: NTobias Klauser <tklauser@nuerscht.ch>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add a modeline for the Philips 200W display.  aty128fb does not do DDC, it
picks 1920x1440 or similar.  It works ok with nvidiafb because it can ask
for DDC data.

mode "1680x1050-60"
    # D: 146.028 MHz, H: 65.191 kHz, V: 59.863 Hz
    geometry 1680 1050 1680 1050 16
    timings 6848 280 104 30 3 176 6
    hsync high
    vsync high
    rgba 5/11,6/5,5/0,0/0
endmode

 hwinfo --monitor
20: None 00.0: 10000 Monitor
  [Created at monitor.206]
  Unique ID: rdCR.pzUFTofo1S4
  Parent ID: 002j.bJRsY88eNSC
  Hardware Class: monitor
  Model: "PHILIPS Philips 200W"
  Vendor: PHL "PHILIPS"
  Device: eisa 0x0832 "Philips 200W"
  Serial ID: "VN  016596"
  Resolution: 720x400@70Hz
  Resolution: 640x480@60Hz
  Resolution: 640x480@67Hz
  Resolution: 640x480@72Hz
  Resolution: 640x480@75Hz
  Resolution: 800x600@56Hz
  Resolution: 800x600@60Hz
  Resolution: 800x600@72Hz
  Resolution: 800x600@75Hz
  Resolution: 832x624@75Hz
  Resolution: 1024x768@60Hz
  Resolution: 1024x768@70Hz
  Resolution: 1024x768@75Hz
  Resolution: 1280x1024@75Hz
  Resolution: 1152x864@70Hz
  Resolution: 1152x864@75Hz
  Resolution: 1280x960@60Hz
  Resolution: 1280x1024@60Hz
  Resolution: 1680x1050@60Hz
  Size: 433x271 mm
  Driver Info #0:
    Max. Resolution: 1680x1050
    Vert. Sync Range: 56-85 Hz
    Hor. Sync Range: 30-93 kHz
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #5 (VGA compatible controller)
Signed-off-by: NOlaf Hering <olh@suse.de>
Acked-by: N"Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

There are more sparse warnings but fixing those will require some more work
than I want to do without hardware for testing at hand.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
Signed-off-by: NAntonino Daplas <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Quadro NVS280 is a dual-head PCIe card with PCI ID 10de:00fd and subsystem ID
10de:0215.
Signed-off-by: NPavel Roskin <proski@gnu.org>
Signed-off-by: NAntonino Daplas <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

clk_p is always 0.

Coverity Bug 67
Signed-off-by: NAntonino Daplas <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Remove code that can never be reached.

Coverity Bug 67
Signed-off-by: NAntonino Daplas <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Remove unnecessary NULL check.
Signed-off-by: NAntonino Daplas <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Remove unnecessary NULL check.  Being a function private to the driver,
out_edid can never be NULL.
Signed-off-by: NAntonino Daplas <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Remove unnecessary NULL check.
Signed-off-by: NAntonino Daplas <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Remove unnecessary NULL check, as struct info will never be NULL.

Coverity Bug 835
Signed-off-by: NAntonino Daplas <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Remove unnecessary NULL check, as struct info will never be NULL.

Coverity Bug 836
Signed-off-by: NAntonino Daplas <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

A set of 3 small bugfixes, all of which are related to bogus return values
of fb colormap-setting functions.

First, fb_alloc_cmap returns -1 if memory allocation fails. This is a hard
condition to reproduce since you'd have to be really low on memory, but from
studying the contexts in which it is called, I think this function should be
returning a negative errno, and the -1 will be seen as an EPERM. Switching it
to -ENOMEM makes sense.

Second, the store_cmap function which is called for writes to
/sys/class/graphics/fb0/color_map returns 0 for success, but it should be
returning the count of bytes written since its return value ends up in
userspace as the result of the write() syscall.

Third, radeonfb returns 1 instead of a negative errno when FBIOPUTCMAP is
called with an oversized colormap.  This is seen in userspace as a return
value of 1 from the ioctl() syscall with errno left unchanged.  A more
useful return value would be -EINVAL.
Signed-off-by: NAlan Curry <pacman@TheWorld.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

DDC reading via the Video BIOS may take several tens of seconds with some
combination of display cards and monitors.

Make this option configurable.  It defaults to `y' to minimise disruption.
Signed-off-by: NAntonino Daplas <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add support for Alchemy Au1200 framebuffer driver
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
Signed-off-by: NAntonino Daplas <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

A few cleanups which were done to almost all i2c drivers some times
ago, but matroxfb_maven was forgotten:

* Don't allocate two different structures at once.
* Use kzalloc instead of kmalloc+memset.
* Use strlcpy instead of strcpy.
* Drop duplicate error message on client deregistration failure.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Acked-by: NPetr Vandrovec <vandrove@vc.cvut.cz>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

insmod will tell us when the module failed to load.  We do no further
processing on the return from i2c_add_driver(), so just return what
i2c_add_driver() did, instead of storing it.

Add __init/__exit annotations while we're at it.
Signed-off-by: NArthur Othieno <apgo@patchbomb.org>
Acked-by: NJean Delvare <khali@linux-fr.org>
Acked-by: NPetr Vandrovec <petr@vandrovec.name>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

A framebuffer driver for the display controller in AMD Geode GX processors
(Geode GX533, Geode GX500 etc.).  Tested at 640x480, 800x600, 1024x768 and
1280x1024 at 8, 16, and 24 bpp with both CRT and TFT.  No accelerated features
currently implemented and compression remains disabled.

This driver requires that the BIOS (or the SoftVG/Firmbase code in the BIOS)
has created an appropriate virtual PCI header.
Signed-off-by: NDavid Vrabel <dvrabel@arcom.com>
Signed-off-by: NAntonino Daplas <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add suspend and resume hooks to make software suspend more reliable.  Resuming
from standby should generally work.  Resuming from mem and from disk requires
that the GPU is disabled.  Adding these to the suspend script...

fbset -accel false -a
/* suspend here */
fbset -accel true -a

...  should generally work.  In addition, resuming from mem requires that the
video card has to be POSTed by the BIOS or some other utility.
Signed-off-by: NAntonino Daplas <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The scrollback buffer of the VGA console is located in VGA RAM.  This RAM
is fixed in size and is very small.  To make the scrollback buffer larger,
it must be placed instead in System RAM.

This patch adds this feature.  The feature and the size of the buffer are
made as a kernel config option.  Besides consuming kernel memory, this
feature will slow down the console by approximately 20%.
Signed-off-by: NAntonino Daplas <adaplas@pol.net>
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Cc: Jindrich Makovicka <makovick@kmlinux.fjfi.cvut.cz>
Cc: Martin Mares <mj@ucw.cz>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This corrects cursor resize on ega boards: registers are write-only, so we
shouldn't even try to read them.  And on ega, 31/30 produces a flat cursor.
Using 31/31 is better: except with 32 pixels high fonts, it shouldn't show
up.
Signed-off-by: NSamuel Thibault <samuel.thibault@ens-lyon.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>