drivers/iio/frequency/adf4350.c:316:32: warning: ‘val’ may be used uninitialized in this function
[-Wuninitialized]
Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Reported-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: NSamuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: NSamuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

When uninstalling a device, the call to the ipack_bus_ops remove() frees
resources in the ipack device driver but without unregistering the device.

It generates a kernel oops when somebody wants to unregister the device.
Signed-off-by: NSamuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

tpci200->info is used later when uninstalling the module. As there is another
kfree in the proper place, this patch removes the wrong one.
Signed-off-by: NSamuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

When uninstalling a device, there is a loop of calls that produces, at the end,
two calls to __ipoctal_remove() function with the same ipack_device argument.

The first time works fine, but the second will fail in tty_unregister_driver()

To avoid this situation, the call to __ipoctal_remove() it is done only from the
ipack bus driver and not from the ipack device driver.
Signed-off-by: NSamuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

When a bus driver calls ipack_driver_register(), it should manages the returning
NULL value to undo all the operations it did before this call, and print the
corresponding trace.

It is not a task for the ipack driver to call the remove() function here.
Signed-off-by: NSamuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Use idr interface to give the bus number. That way, we remove the
limitation of 64 buses.

The mutex is removed because the ida interface uses spinlocks inside, so it is
not needed an extra lock.
Signed-off-by: NSamuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

When ipack_device_register() is called, the variable
tpci200->slots[dev->slot].dev has not assigned a value and it gives an error
when the mezzanine driver is reading a register from the board for the match()
function, as all the I/O functions call check_slot().
Signed-off-by: NSamuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This field is not needed at all, as the IRQ is registered for the carrier not
for the mezzanine.
Signed-off-by: NSamuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: NSamuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

To avoid a dereference of a NULL pointer, the availability of the function is
checked before its use.
Signed-off-by: NSamuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

tpci200_slot_map_space() should return 0 if the operation was properly
done. If not, the caller will think that something wrong happened.

This patch establish the returned value to 0. It is overwritten in case of
error.
Signed-off-by: NSamuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

tpci200_slot_unmap_space() should return 0 if the operation was properly done. If
not, the caller will think that something wrong happened.
Signed-off-by: NSamuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

It should return the same value given by the match function of the ipack_driver
that has been called.

Returning 0 here, means that the match has failed and it could be succeed.
Signed-off-by: NSamuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

To perform the installation of a mezzanine it was needed to write on these
files, now it is not needed at all as the device model is properly implemented.
Signed-off-by: NSamuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

version.h header file is no longer required.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The memory regions of the probe and remove are move
to __devinit and __devexit respectively.
Acked-by: NJonathan Cameron <jic23@kernel.org>
Signed-off-by: NShubhrajyoti D <shubhrajyoti@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The memory regions of the probe and remove are move
to __devinit and __devexit respectively.
Acked-by: NJonathan Cameron <jic23@kernel.org>
Signed-off-by: NShubhrajyoti D <shubhrajyoti@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The IIO DAC drivers are in a reasonably good shape. They all make use of channel
spec and non of them provides non-documented sysfs attributes. Code style should
be OK as well, both checkpatch and coccicheck only report trivial issues.

So lets move the whole folder out of staging.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Acked-by: NJonathan Cameron <jic23@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The header for this driver contains some private structs and defines, which do
not have to be shared between multiple source files, as well as the platform
data struct for this driver, which has to be shared with other source files.
Since there is no need to expose those private structs and defines move them to
the source file.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Acked-by: NJonathan Cameron <jic23@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The header for this driver contains some private structs and defines, which do
not have to be shared between multiple source files, as well as the platform
data struct for this driver, which has to be shared with other source files.
Since there is no need to expose those private structs and defines move them to
the source file.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Acked-by: NJonathan Cameron <jic23@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

IRQ support is optional, so we have to check whether it was actually requested
before we attempt to free it.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Acked-by: NJonathan Cameron <jic23@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Use strtobool for parsing the powerdown value instead of strict_strtol, since
the powerdown attribute is a boolean value.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Acked-by: NJonathan Cameron <jic23@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Use strtobool for parsing the powerdown value instead of strict_strtol, since
the powerdown attribute is a boolean value.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Acked-by: NJonathan Cameron <jic23@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Use strtobool for parsing the powerdown value instead of strict_strtol, since
the powerdown attribute is a boolean value.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Acked-by: NJonathan Cameron <jic23@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Now that all drivers have been converted to channel spec, we can finally remove
the dac.h file since it is no longer used.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Acked-by: NJonathan Cameron <jic23@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Convert the max517 driver to channel spec. As part of the conversion the
"out_voltage_1&2_raw" property, which updates both channel 1 and 2
simultaneously with the same value, is lost, since this is not really covered by
the IIO spec and has only a limited use case in practice.

Also the channel index for the sysfs files is now zero based instead of one
based, which means all channel numbers will be lower by one. E.g.
"out_voltage_1_scale" instead of "out_voltage_2_scale"
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Acked-by: NJonathan Cameron <jic23@kernel.org>
Acked-by: NRoland Stigge <stigge@antcom.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

None of these drivers use anything from dac.h, so remove the include.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Acked-by: NJonathan Cameron <jic23@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Use extended channel attributes instead of raw sysfs files for the additional
channel attributes. This allows us to remove some boilerplate code.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Acked-by: NJonathan Cameron <jic23@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Use extended channel attributes instead of raw sysfs files for the additional
channel attributes. This allows us to remove some boilerplate code.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Acked-by: NJonathan Cameron <jic23@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Use extended channel attributes instead of raw sysfs files for the additional
channel attributes. This allows us to remove some boilerplate code.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Acked-by: NJonathan Cameron <jic23@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Use extended channel attributes instead of raw sysfs files for the additional
channel attributes. This allows us to remove some boilerplate code.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Acked-by: NJonathan Cameron <jic23@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Use extended channel attributes instead of raw sysfs files for the additional
channel attributes. This allows us to remove some boilerplate code.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Acked-by: NJonathan Cameron <jic23@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This allows us to remove some boilerplate code for comparing and formatting the
enum strings.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Acked-by: NJonathan Cameron <jic23@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This allows us to remove some boilerplate code for comparing and formatting the
enum strings.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Acked-by: NJonathan Cameron <jic23@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

We often have the case were we do have a enum style channel attribute. These
attributes have in common that they are a list of string values which usually
map in a 1-to-1 fashion to integer values.

This patch implements some common helper code for implementing enum style
channel attributes using extended channel attributes. The helper functions take
care of converting between the string and integer values, as well providing a
function for "_available" attributes which list all available enum items.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Acked-by: NJonathan Cameron <jic23@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Use iio_device_get and iio_device_put instead of open-coding it.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Acked-by: NJonathan Cameron <jic23@kernel.org>
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch add the iio_device_get() function, which increases the reference
count of a iio device. The matching function to decrease the reference count -
iio_device_put() - already exists.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Acked-by: NJonathan Cameron <jic23@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

version.h header file is no longer required.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>