- 14 9月, 2012 1 次提交
-
-
由 Arnd Bergmann 提交于
Platform data for device drivers should be defined in include/linux/platform_data/*.h, not in the architecture and platform specific directories. This moves such data out of the sa1100 include directories Signed-off-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: NNicolas Pitre <nico@linaro.org> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Jochen Friedrich <jochen@scram.de>
-
- 10 7月, 2012 1 次提交
-
-
由 Russell King 提交于
Make the OS timer registers have IOMEM like properities so they can be passed to readl_relaxed/writel_relaxed() et.al. rather than being straight volatile dereferences. Add linux/io.h includes where required. linux/io.h includes added to arch/arm/mach-sa1100/cpu-sa1100.c, arch/arm/mach-sa1100/jornada720_ssp.c, arch/arm/mach-sa1100/leds-lart.c drivers/input/touchscreen/jornada720_ts.c, drivers/pcmcia/sa1100_shannon.c from Arnd. This fixes these warnings: arch/arm/mach-sa1100/time.c: In function 'sa1100_timer_init': arch/arm/mach-sa1100/time.c:104: warning: passing argument 1 of 'clocksource_mmio_init' discards qualifiers from pointer target type arch/arm/mach-pxa/time.c: In function 'pxa_timer_init': arch/arm/mach-pxa/time.c:126: warning: passing argument 1 of 'clocksource_mmio_init' discards qualifiers from pointer target type Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 08 5月, 2012 1 次提交
-
-
由 Shawn Guo 提交于
Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
-
- 26 3月, 2012 1 次提交
-
-
由 Rob Herring 提交于
In preparation to convert SA1100 to sparse irq, set .nr_irqs for each machine and explicitly include mach/irqs.h as needed. Signed-off-by: NRob Herring <rob.herring@calxeda.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 21 2月, 2012 2 次提交
-
-
由 Russell King 提交于
Now that we have platform data contained within the individual board code, we can get rid of the global function pointers, placing them inside the platform data instead. Acked-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Move platform data out of the sa1100fb driver into the various platform files themselves. Acked-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 19 2月, 2012 2 次提交
-
-
由 Russell King 提交于
Move the assabet specific reset handling out of mcp-sa11x0.c, into its board file. This leaves the mcp code free from all board specific details. Acked-by: NJochen Friedrich <jochen@scram.de> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Add ucb1x00 platform data to enable GPIO support on the UCB1300 device. Acked-by: NJochen Friedrich <jochen@scram.de> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 09 2月, 2012 5 次提交
-
-
由 Russell King 提交于
The neponset board is a daughter board for the Assabet. Create the neponset platform device in assabet.c, where we don't have to wrap it with machine_is_assabet() stuff. We also create this device dynamically rather than keeping it as a static device. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
GPIO27 is just connected to a CPLD input without any pull-ups or pull- downs. If GPIO27 is left as an input, it will float around mid-supply, which for CMOS inputs is the worst place for a pin to be. Ensure that this pin is driven. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Avoid glitching the GPIO signals during initialization, which can have undesirable effects. Ensure that the desired pin state is set before we change the GPIO pin direction to be an output. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Convert StrongARM-11x0 platforms and core SoC code to use the DEFINE_RES_xxx macros. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 04 2月, 2012 1 次提交
-
-
由 Russell King 提交于
Patch taken from af9081ae (ARM: sa1100: Refactor mcp-sa11x0 to use platform resources.) by Jochen Friedrich <jochen@scram.de>, and consolidated to use a common function. Move the setup of the PPC unit out of mcp-sa11x0 into the core SA11x0 code, and call it from each platforms initialization file. This centralizes the setup of the PPC unit while not polluting the mcp-sa11x0 driver with these details. Acked-by: NJochen Friedrich <jochen@scram.de> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 21 1月, 2012 2 次提交
-
-
由 Russell King 提交于
This reverts commit 5dd7bf59. Conflicts: scripts/mod/file2alias.c This change is wrong on many levels. First and foremost, it causes a regression. On boot on Assabet, which this patch gives a codec id of 'ucb1x00', it gives: ucb1x00 ID not found: 1005 0x1005 is a valid ID for the UCB1300 device. Secondly, this patch is way over the top in terms of complexity. The only device which has been seen to be connected with this MCP code is the UCB1x00 (UCB1200, UCB1300 etc) devices, and they all use the same driver. Adding a match table, requiring the codec string to match the hardware ID read out of the ID register, etc is completely over the top when we can just read the hardware ID register.
-
由 Russell King 提交于
This reverts commit af9081ae. This revert is necessary to revert 5dd7bf59.
-
- 17 1月, 2012 1 次提交
-
-
由 Russell King 提交于
Since a32618d2 (ARM: pgtable: switch to use pgtable-nopud.h), assabet warns as follows: arch/arm/mach-sa1100/assabet.c: In function 'map_sa1100_gpio_regs': arch/arm/mach-sa1100/assabet.c:264: warning: passing argument 1 of 'pmd_offset' from incompatible pointer type Fix this by adding the necessary pud_offset() macro. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 09 1月, 2012 2 次提交
-
-
由 Jochen Friedrich 提交于
Make use of memory resources rather than hardcoded IO adresses. This is a first step towards DT support. Signed-off-by: NJochen Friedrich <jochen@scram.de> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Jochen Friedrich 提交于
Signed-off-by: NJochen Friedrich <jochen@scram.de> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
- 05 1月, 2012 1 次提交
-
-
由 Russell King 提交于
Hook these platforms restart code into the new restart hook rather than using arch_reset(). Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 17 10月, 2011 1 次提交
-
-
由 Russell King 提交于
Get rid of the mdesc pointer in the fixup function call. No one uses the mdesc pointer, it shouldn't be modified anyway, and we can't wrap it, so let's remove it. Platform files found by: $ regexp=$(git grep -h '\.fixup.*=' arch/arm | sed 's!.*= *\([^,]*\),* *!\1!' | sort -u | tr '\n' '|' | sed 's,|$,,;s,|,\\|,g') $ git grep $regexp arch/arm Acked-by: NNicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 22 8月, 2011 1 次提交
-
-
由 Nicolas Pitre 提交于
Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org> Acked-by: NArnd Bergmann <arnd@arndb.de>
-
- 19 7月, 2011 1 次提交
-
-
由 Nicolas Pitre 提交于
Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org>
-
- 20 10月, 2010 1 次提交
-
-
由 Nicolas Pitre 提交于
Since we're now using addruart to establish the debug mapping, we can remove the io_pg_offst and phys_io members of struct machine_desc. The various declarations were removed using the following script: grep -rl MACHINE_START arch/arm | xargs \ sed -i '/MACHINE_START/,/MACHINE_END/ { /\.\(phys_io\|io_pg_offst\)/d }' [ Initial patch was from Jeremy Kerr, example script from Russell King ] Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org> Acked-by: Eric Miao <eric.miao at canonical.com>
-
- 07 12月, 2009 1 次提交
-
-
由 Russell King 提交于
Only register devices if we have platform data for those which require platform data. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 07 8月, 2008 2 次提交
-
-
由 Russell King 提交于
This just leaves include/asm-arm/plat-* to deal with. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Remove includes of asm/hardware.h in addition to asm/arch/hardware.h. Then, since asm/hardware.h only exists to include asm/arch/hardware.h, update everything to directly include asm/arch/hardware.h and remove asm/hardware.h. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 01 7月, 2006 1 次提交
-
-
由 Jörn Engel 提交于
Signed-off-by: NJörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: NAdrian Bunk <bunk@stusta.de>
-
- 22 3月, 2006 1 次提交
-
-
由 Russell King 提交于
Move the hardware PMD and PTE page table definitions from pgtable.h into pgtable-hwdef.h, and include pgtable-hwdef.h as necessary. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 14 1月, 2006 1 次提交
-
-
由 Nicolas Pitre 提交于
Patch from Nicolas Pitre This field is redundent since it must be equal to PHYS_OFFSET anyway. Now that no code uses it anymore, mark it deprecated and remove all initializations from the tree. Signed-off-by: NNicolas Pitre <nico@cam.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 22 11月, 2005 1 次提交
-
-
由 Russell King 提交于
assabet.c:291: warning: 'scr' may be used uninitialized in this function Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 28 10月, 2005 1 次提交
-
-
由 Deepak Saxena 提交于
Patch from Deepak Saxena SA1100 map_desc.pfn conversion Signed-off-by: NDeepak Saxena <dsaxena@plexity.net> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 18 8月, 2005 1 次提交
-
-
由 Russell King 提交于
Add platform device data for the SA11x0 MCP device. This allows platforms to customise the configuration of the SA11x0 MCP device according to their needs. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 04 7月, 2005 1 次提交
-
-
由 Russell King 提交于
Remove the pointless machine description macros, favouring C99 initialisers instead. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 17 4月, 2005 1 次提交
-
-
由 Linus Torvalds 提交于
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
-