IPv6 specific thing is wrongly removed from transformation at net-2.6.25.
This patch recovers it with current design.

o Update "path" of xfrm_dst since IPv6 transformation should
  care about routing changes. It is required by MIPv6 and
  off-link destined IPsec.
o Rename nfheader_len which is for non-fragment transformation used by
  MIPv6 to rt6i_nfheader_len as IPv6 name space.
Signed-off-by: NMasahide NAKAMURA <nakam@linux-ipv6.org>
Acked-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

I'd say that most of what tcp_tso_should_defer had in between
there was dead code because of this.
Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch updates the version number to 3.87.
Signed-off-by: NMatt Carlson <mcarlson@broadcom.com>
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch does three things.  It modifies tg3_setup_flow_control() to
use the administrator requested flow control settings if
autonegotiation is turned off.  It slightly modifies the
tg3_setup_fiber_mii_phy() function to account for this new use case.
And finally, it does the same for tg3_setup_copper_phy().

The copper modifications are more than a small multi-line change.  The
new code makes an attempt to avoid a link renegotiation if the link is
active at half duplex and the only difference between the current
advertised settings and requested advertised settings is the
flow control advertisements.
Signed-off-by: NMatt Carlson <mcarlson@broadcom.com>
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch modifies the software autoneg code to use the administrator
specified flow control parameters.  Since the autonegotiation code uses
alternative flow control enumerations, the 1000-BaseX utility functions
are used and code was added to convert the definitions to and from the
alternate enumerations.
Signed-off-by: NMatt Carlson <mcarlson@broadcom.com>
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch modifies the 5704S hardware autoneg code to use the
administrator specified flow control parameters.  Since the 5704S uses
device specific flow control enumerations, the 1000-BaseX utility
functions are used and code was added to convert the definitions to and
from the proprietary enumerations.
Signed-off-by: NMatt Carlson <mcarlson@broadcom.com>
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch replaces magic values with preprocessor definitions for
the sg_dig_ctrl and sg_dig_status registers.  This is preparatory work
for the next patch.
Signed-off-by: NMatt Carlson <mcarlson@broadcom.com>
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds two functions designed to convert abstract TX & RX
flow control parameters to 1000-BaseT and 1000-BaseX autonegotiation
advertisements.  Code that uses standard definitions which statically
advertises TX & RX flow control has been replaced with code that
configures the advertisements based on administrator dictated
preferences.
Signed-off-by: NMatt Carlson <mcarlson@broadcom.com>
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds two new utility functions to resolve flow control.  One
function resolves flow control based on 1000-BaseT register definitions.
The other resolves flow control based on 1000-Base X register
definitions.
Signed-off-by: NMatt Carlson <mcarlson@broadcom.com>
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch removes the TX and RX flow control flags from tg3_flags and
adds two new flow control variables, flowctrl and active_flowctrl.
Signed-off-by: NMatt Carlson <mcarlson@broadcom.com>
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The neigh_del_timer() looks sane - it removes the timer and
(conditionally) puts the neighbor. I expected, that the
neigh_add_timer() is symmetrical to the del one - i.e. it
holds the neighbor and arms the timer - but it turned out
that it was not so.

I think, that making them look symmetrical makes the code
more readable.
Signed-off-by: NPavel Emelyanov <xemul@openvz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This one is not that big, but is widely used: saves 1200 bytes
from net/ipv4/built-in.o

add/remove: 1/0 grow/shrink: 1/12 up/down: 97/-1300 (-1203)
function                                     old     new   delta
inet_twsk_put                                  -      87     +87
__inet_lookup_listener                       274     284     +10
tcp_sacktag_write_queue                     2255    2254      -1
tcp_time_wait                                482     411     -71
__inet_check_established                     796     722     -74
tcp_v4_err                                   973     898     -75
__inet_twsk_kill                             230     154     -76
inet_twsk_deschedule                         180     103     -77
tcp_v4_do_rcv                                462     384     -78
inet_hash_connect                            686     607     -79
inet_twdr_do_twkill_work                     236     150     -86
inet_twdr_twcal_tick                         395     307     -88
tcp_v4_rcv                                  1744    1480    -264
tcp_timewait_state_process                   975     644    -331

Export it for ipv6 module.
Signed-off-by: NPavel Emelyanov <xemul@openvz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This is -700 bytes from the net/ipv4/built-in.o

add/remove: 1/0 grow/shrink: 1/3 up/down: 340/-1040 (-700)
function                                     old     new   delta
__inet_lookup_established                      -     339    +339
tcp_sacktag_write_queue                     2254    2255      +1
tcp_v4_err                                  1304     973    -331
tcp_v4_rcv                                  2089    1744    -345
tcp_v4_do_rcv                                826     462    -364

Exporting is for dccp module (used via e.g. inet_lookup).
Signed-off-by: NPavel Emelyanov <xemul@openvz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This one is used in quite many places in the networking code and
seems to big to be inline.

After the patch net/ipv4/build-in.o loses ~650 bytes:
add/remove: 2/0 grow/shrink: 0/5 up/down: 461/-1114 (-653)
function                                     old     new   delta
__inet_hash_nolisten                           -     282    +282
__inet_hash                                    -     179    +179
tcp_sacktag_write_queue                     2255    2254      -1
__inet_lookup_listener                       284     274     -10
tcp_v4_syn_recv_sock                         755     493    -262
tcp_v4_hash                                  389      35    -354
inet_hash_connect                           1086     599    -487

This version addresses the issue pointed by Eric, that
while being inline this function was optimized by gcc
in respect to the 'listen_possible' argument.
Signed-off-by: NPavel Emelyanov <xemul@openvz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The Security Considerations section of RFC 5061 has the following
text:

   If an SCTP endpoint that supports this extension receives an INIT
   that indicates that the peer supports the ASCONF extension but does
   NOT support the [RFC4895] extension, the receiver of such an INIT
   MUST send an ABORT in response.  Note that an implementation is
   allowed to silently discard such an INIT as an option as well, but
   under NO circumstance is an implementation allowed to proceed with
   the association setup by sending an INIT-ACK in response.

   An implementation that receives an INIT-ACK that indicates that the
   peer does not support the [RFC4895] extension MUST NOT send the
   COOKIE-ECHO to establish the association.  Instead, the
   implementation MUST discard the INIT-ACK and report to the upper-
   layer user that an association cannot be established destroying the
   Transmission Control Block (TCB).

Follow the recomendations.
Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

ADD-IP spec has a special case for processing ABORTs:
    F4) ... One special consideration is that ABORT
        Chunks arriving destined to the IP address being deleted MUST be
        ignored (see Section 5.3.1 for further details).

Check if the address we received on is in the DEL state, and if
so, ignore the ABORT.
Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The processing of the ASCONF chunks has changed a lot in the
spec.  New items are:
    1. A list of ASCONF-ACK chunks is now cached
    2. The source of the packet is used in response.
    3. New handling for unexpect ASCONF chunks.
Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

   C4)  Both ASCONF and ASCONF-ACK Chunks MUST NOT be sent in any SCTP
        state except ESTABLISHED, SHUTDOWN-PENDING, SHUTDOWN-RECEIVED,
        and SHUTDOWN-SENT.
Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

ADD-IP draft section 5.2 specifies that if an association can not
be found using the source and destination of the IP packet,
then, if the packet contains ASCONF chunks, the Address Parameter
TLV should be used to lookup an association.
Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The ADD-IP "Set Primary IP Address" parameter is allowed in the
INIT/INIT-ACK exchange.  Allow processing of this parameter during
the INIT/INIT-ACK.
Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The Address Parameter in the parameter list of the ASCONF chunk
may be a wildcard address.  In this case special processing
is required.  For the 'add' case, the source IP of the packet is
added.  In the 'del' case, all addresses except the source IP
of packet are removed. In the "mark primary" case, the source
address is marked as primary.
Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Now that we support AUTH, discard unauthenticated ASCONF and ASCONF ACK
chunks as mandated in the ADD-IP spec.
Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It appears that I've managed to create two different functions both
called xfrm6_tunnel_output.  This is because we have the plain tunnel
encapsulation named xfrmX_tunnel as well as the tunnel-mode encapsulation
which lives in the files xfrmX_mode_tunnel.c.

This patch renames functions from the latter to use the xfrmX_mode_tunnel
prefix to avoid name-space conflicts.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add a new rate control algorithm based on a PID controller. It samples the
percentage of failed frames over time, feeds the result into the controller and
uses its output to control the TX rate.
Signed-off-by: NMattias Nissler <mattias.nissler@gmx.de>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Move some code out of rc80211_simple since it's probably needed for all rate
selection algorithms, and fix iwlwifi accordingly. While at it, clean up the
rate_control_get_rate() interface.
Signed-off-by: NStefano Brivio <stefano.brivio@polimi.it>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch fixes should_drop_frame function to pass in ps poll control
frames required for power save functioanlity. Interface types that do not
have interest for PS POLL frames now drop it in handler.
Signed-off-by: NRon Rindjunsky <ron.rindjunsky@intel.com>
Acked-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The SNMP macros use raw_smp_processor_id() in process context
which is illegal because the process may be preempted and then
migrated to another CPU.

This patch makes it use get_cpu/put_cpu to disable preemption.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

While merging the IPsec output path I moved the encapsulation output
operation to the top of the loop so that it sits outside of the locked
section.  Unfortunately in doing so it now sits in front of the space
check as well which could be a fatal error.

This patch rearranges the calls so that the space check happens as
the thing on the output path.

This patch also fixes an incorrect goto should the encapsulation output
fail.

Thanks to Kazunori MIYAZAWA for finding this bug.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The NETFILTER_ADVANCED option hides lots of the rather obscure netfilter
options when disabled and provides defaults (M) that should allow to
run a distribution firewall without further thinking.

Defaults to 'y' to avoid breaking current configurations.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Apply Eric Dumazet's jhash optimizations where applicable. Quoting Eric:

Thanks to jhash, hash value uses full 32 bits. Instead of returning
hash % size (implying a divide) we return the high 32 bits of the
(hash * size) that will give results between [0 and size-1] and same
hash distribution.

On most cpus, a multiply is less expensive than a divide, by an order
of magnitude.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch generalizes the (CONFIG_IP6_NF_IPTABLES || CONFIG_IP6_NF_IPTABLES_MODULE)
test done in hashlimit_init_dst() to all the xt_hashlimit module.

This permits a size reduction of "struct dsthash_dst". This saves memory and
cpu for IPV4 only hosts.
Signed-off-by: NEric Dumazet <dada1@cosmosbay.com>
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

1) Using jhash2() instead of jhash() is a litle bit faster if applicable.

2) Thanks to jhash, hash value uses full 32 bits.
   Instead of returning hash % size (implying a divide)
   we return the high 32 bits of the (hash * size) that will
   give results between [0 and size-1] and same hash distribution.

  On most cpus, a multiply is less expensive than a divide, by an order
  of magnitude.
Signed-off-by: NEric Dumazet <dada1@cosmosbay.com>
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NJan Engelhardt <jengelh@computergmbh.de>
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Parenthesize macro parameters.
Signed-off-by: NJan Engelhardt <jengelh@computergmbh.de>
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

A few netfilter modules provide their own union of IPv4 and IPv6
address storage. Will unify that in this patch series.

(1/4): Rename union nf_conntrack_address to union nf_inet_addr and
move it to x_tables.h.
Signed-off-by: NJan Engelhardt <jengelh@computergmbh.de>
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use %u format specifiers as ->family is unsigned.
Signed-off-by: NJan Engelhardt <jengelh@computergmbh.de>
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>