remove unused acpi_found_madt in mparse.c
Signed-off-by: NYinghai Lu <yinghai.lu@amd.com>
Signed-off-by: NAndi Kleen <ak@suse.de>

Make mce_remove_device() clean up the kobject in per_cpu(device_mce, cpu)
after it has been unregistered.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NAndi Kleen <ak@suse.de>

One ARCH_DISCONTIGMEM_ENABLE option is enough.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NAndi Kleen <ak@suse.de>

interrupt array is referred for idt vectors instead of NR_IRQS, so change size
to NR_VECTORS - FIRST_EXTERNAL_VECTOR. Also change to static.
Signed-off-by: NYinghai Lu <yinghai@amd.com>
Signed-off-by: NAndi Kleen <ak@suse.de>

idt_table is in the .bss section, so clear_bss need to called at first
Signed-off-by: NYinghai Lu <yinghai.lu@amd.com>
Signed-off-by: NAndi Kleen <ak@suse.de>

Add sysctl for kstack_depth_to_print. This lets users change
the amount of raw stack data printed in dump_stack() without
having to reboot.
Signed-off-by: NChuck Ebbert <76306.1226@compuserve.com>
Signed-off-by: NAndi Kleen <ak@suse.de>

Remove unused GET_APIC_VERSION call from clear_local_APIC() and
__setup_APIC_LVTT().

Reported by D Binderman <dcb314@hotmail.com>.

Cc: Andi Kleen <ak@suse.de>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: NDavid Rientjes <rientjes@cs.washington.edu>
Signed-off-by: NAndi Kleen <ak@suse.de>

Read/Write APIC_LVTPC and APIC_LVTTHMR only,
if get_maxlvt() returns certain values.
This is done like everywhere else in i386/kernel/apic.c,
so I guess its correct.
Suspends/Resumes to disk fine and eleminates an smp_error_interrupt()
here on a K8.

AK: ported to x86-64 too
Signed-off-by: NKarsten Wiese <fzu@wemgehoertderstaat.de>
Signed-off-by: NAndi Kleen <ak@suse.de>

Here is a small patch for x86-64 which adds a cpufeature flag and
detection code for Intel's Branch Trace Store (BTS) feature. This
feature can be found on Intel P4 and Core 2 processors among others.
It can also be used by perfmon.

changelog:
	- add CPU_FEATURE_BTS
	- add Branch Trace Store detection
signed-off-by: Nstephane eranian <eranian@hpl.hp.com>
Signed-off-by: NAndi Kleen <ak@suse.de>

Move the irqbalance quirks for E7320/E7520/E7525(Errata 23 in
http://download.intel.com/design/chipsets/specupdt/30304203.pdf) to early
quirks.

And add a PCI quirk for these platforms to check(which happens very late
during the boot) if the APIC routing is indeed set to default flat mode.

This fixes the breakage(in x86_64) of this quirk due to cpu hotplug which
selects physical mode instead of the logical flat(as needed for this errata
workaround).
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: NAndi Kleen <ak@suse.de>
Cc: Andi Kleen <ak@suse.de>
Cc: "Li, Shaohua" <shaohua.li@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>

Add genapic_force. Used by the next Intel quirks patch.
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: NAndi Kleen <ak@suse.de>
Cc: Andi Kleen <ak@suse.de>
Cc: "Li, Shaohua" <shaohua.li@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>

Signed-off-by: NAndi Kleen <ak@suse.de>

The final line of /proc/<pid>/maps on x86_64 for native 64-bit
tasks shows an incorrect ending address and incorrect permissions.  There
is only a single page mapped in this vsyscall region, and it is accessible
for both read and execute.

The patch below fixes this.  (Since 32-bit-compat tasks have a real vma
with correct perms/range, no change is necessary for that scenario.)

Before the patch, a "cat /proc/self/maps | tail -1" shows this:

        ffffffffff600000-ffffffffffe00000 ---p 00000000 [...]

After the patch, this is the output:

        ffffffffff600000-ffffffffff601000 r-xp 00000000 [...]
Signed-off-by: NErnie Petrides <petrides@redhat.com>
Signed-off-by: NAndi Kleen <ak@suse.de>

Add an option to compile for Intel's Core 2

The Kconfig help is a mouthful due to the inventiveness of Intel's
product naming department.

Mainly for the 64bit cache line sizes because gcc doesn't support
optimizing for core2 yet. However it will and then the kernel
should be ready by passing the right option

Also fix the old MPSC help text to confirm better to reality.
Signed-off-by: NAndi Kleen <ak@suse.de>

It's two big and used by two callers. Calls should be cheap enough anyways.
Signed-off-by: NAndi Kleen <ak@suse.de>

Interrupt could happen between setting the IO-APIC entry
and setting its interrupt data.

Pointed out by Linus.
Signed-off-by: NAndi Kleen <ak@suse.de>

Port two patches from i386 to x86_64 delay.c to make sure all rounding is done
upward instead of downward.

There is no sign in commit messages that the mismatch was done on purpose, and
"delay() guarantees sleeping at least for the specified time" is still a valid
rule IMHO.

The original x86 patches are both from pre-GIT era, i.e.:

"[PATCH] round up  in __udelay()" in commit
54c7e1f5cc6771ff644d7bc21a2b829308bd126f

"[PATCH] add 1 in __const_udelay()" in commit
42c77a9801b8877d8b90f65f75db758822a0bccc

(both commits are from converted BK repository to x86_64).

AK: fixed gcc warning

linux/arch/x86_64/lib/delay.c:43: warning: suggest parentheses around + or - inside shift
(did this actually work?)
Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndi Kleen <ak@suse.de>

This patch makes it possible to compile Calgary in but not use it by
default. In this mode, use 'iommu=calgary' to activate it.
Signed-off-by: NMuli Ben-Yehuda <muli@il.ibm.com>
Signed-off-by: NJon Mason <jdmason@kudzu.us>
Signed-off-by: NAndi Kleen <ak@suse.de>

This patch cleans up the previous "Use BIOS supplied BBAR information"
patch. Mostly stylistic clenaups, but also check for ioremap failure
when we ioremap the BBAR rather than when trying to use it.
Signed-off-by: NMuli Ben-Yehuda <muli@il.ibm.com>
Signed-off-by: NJon Mason <jdmason@kudzu.us>
Signed-off-by: NAndi Kleen <ak@suse.de>
Acked-by: NLaurent Vivier <Laurent.Vivier@bull.net>

Find the BBAR register address of each Calgary using the "Extended
BIOS Data Area" rather than calculating it ourselves. Also get the bus
topology (what PHB each bus is on) from Calgary rather than
calculating it ourselves.

This patch fixes http://bugzilla.kernel.org/show_bug.cgi?id=7407.
Signed-off-by: NLaurent Vivier <Laurent.Vivier@bull.net>
Signed-off-by: NMuli Ben-Yehuda <muli@il.ibm.com>
Signed-off-by: NJon Mason <jdmason@kudzu.us>
Signed-off-by: NAndi Kleen <ak@suse.de>

Signed-off-by: NMuli Ben-Yehuda <muli@il.ibm.com>
Signed-off-by: NJon Mason <jdmason@kudzu.us>
Signed-off-by: NAndi Kleen <ak@suse.de>

The recent change to make x86_64 support i386 binaries compiled
with -mregparm=3 only covered signal handlers without SA_SIGINFO.
(the 3-arg "real-time" ones)

To be compatible with i386, both types should be supported.
Signed-off-by: NAlbert Cahalan <acahalan@gmail.com>
Signed-off-by: NAndi Kleen <ak@suse.de>

Instead of adding all kinds of more quirks try various timer
routing variants in check_timer.

In particular this tries to handle quirks from:
- Nvidia NF2-4 reference BIOS: wrong timer override
- Asus: Wrong timer override but no HPET table
- ATI: require timer disabled in 8259
- Some boards: require timer enabled in 8259

We just try many of the the known variants in the hopefully right order
in check_timer.

Trying pin 0/2 on Nvidia suggested by Tim Hockin.

TBD Experimental. Needs a lot of testing
Signed-off-by: NAndi Kleen <ak@suse.de>

Instead of open coded __get_user
Signed-off-by: NAndi Kleen <ak@suse.de>

Clear the irq releated entries in irq_vector, irq_domain and vector_irq
instead of clearing irq_vector only. So when new irq is created, it
could reuse that vector. (actually is the second loop scanning from
FIRST_DEVICE_VECTOR+8). This could avoid the vectors are used up
with enough module inserting and removing

Cc: Eric W. Biedierman <ebiederm@xmission.com>
Cc: Muli Ben-Yehuda <muli@il.ibm.com>
Signed-off-By: NYinghai Lu <yinghai.lu@amd.com>
Signed-off-by: NAndi Kleen <ak@suse.de>

CLFLUSH is a lot faster than WBINVD so avoid the later if at all
possible.

Always pass the complete list of pages to other CPUs to cut down
the number of IPIs.

Minor other cleanup and sync with i386 version.
Signed-off-by: NAndi Kleen <ak@suse.de>

On modern systems RAM errors don't cause NMIs, but it's usually
caused by PCI SERR. Mention PCI instead of RAM in the printk.

Reported by r_hayashi@ctc-g.co.jp (Ryutaro Hayashi)

Cc:  r_hayashi@ctc-g.co.jp
Signed-off-by: NAndi Kleen <ak@suse.de>

Resending as I believe the discussion about them established they were
correct.
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NAndi Kleen <ak@suse.de>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>

Currently the idle loop has two nested loops -- one high level
in cpu_idle and in some low level idle functions another one.

Looping in the low level idle functions breaks the idle notifiers
because interrupts waking up sleep states need to execute
exit_idle() which is only in cpu_idle().

So don't do that, only loop in cpu_idle(). This only removes
code.

In some cases e.g. poll_idle the idle loop is a little longer
now because cpu_idle checks more things. I hope that isn't a problem
ACPI idle doesn't change behaviour because it never looped anyways.

Cc: len.brown@intel.com
Cc: eranian@hpl.hp.com
Signed-off-by: NAndi Kleen <ak@suse.de>

This patch:
- makes ret_from_sys_call no longer global (all external users were
  previously switched to use int_ret_from_sys_call)
- adjusts placement of a CFI_{REMEMBER,RESTORE}_STATE pair to better
  fit logic flow
- eliminates an unnecessary pair of CFI_{REMEMBER,RESTORE}_STATE
- glues together function- and unwinder-wise the previously separate
  system_call and int_ret_from_sys_call function fragments
Signed-off-by: NJan Beulich <jbeulich@novell.com>
Signed-off-by: NAndi Kleen <ak@suse.de>

Fix

BUG: using smp_processor_id() in preemptible [00000001] code:

in backtracer on preemptible debug kernels.

Cc: Andi Kleen <ak@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NAndi Kleen <ak@suse.de>

Insert the Local APIC and IO APIC(s) into the resource tree.  It allows the
APIC resources to be visible within /proc/iomem.  The patch also takes into
account IO APIC(s) mapped in the PCI space by deferring the insertion until
after PCI has allocated its necessary resources.
Signed-off-by: NAaron Durbin <adurbin@google.com>
Signed-off-by: NAndi Kleen <ak@suse.de>
Cc: Andi Kleen <ak@muc.de>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>

When a spinlock lockup occurs, arrange for the NMI code to emit an all-cpu
backtrace, so we get to see which CPU is holding the lock, and where.

Cc: Andi Kleen <ak@muc.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NAndi Kleen <ak@suse.de>

Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NAndi Kleen <ak@suse.de>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>

Here is a patch (used by perfmon2) to detect the presence of the
Precise Event Based Sampling (PEBS) feature for Intel 64-bit processors.
The patch also adds the cpu_has_pebs macro.

changelog:
	- adds X86_FEATURE_PEBS
	- adds cpu_has_pebs to test for X86_FEATURE_PEBS
Signed-off-by: Nstephane eranian <eranian@hpl.hp.com>
Signed-off-by: NAndi Kleen <ak@suse.de>

The unwinder has some extra newlines, which eat up loads of screen
space when it spews. (See https://bugzilla.redhat.com/bugzilla/attachment.cgi?id=137900
for a nasty example).

warning_symbol-> and warning-> already printk a newline, so don't add one
in the strings passed to them.

[AK: redone for new code]
Signed-off-by: NDave Jones <davej@redhat.com>
Signed-off-by: NAndi Kleen <ak@suse.de>

Andrew complained about > 80 character lines in the new unwinder.
Fix that.
Signed-off-by: NAndi Kleen <ak@suse.de>

Signed-off-by: NAndi Kleen <ak@suse.de>

* sanitize prototypes, annotate
* usual ntohs->shift
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Previously it would check for alignment only, which could break
if the stack pointer was unaligned. Now explicitely check if the
stack pointer is in the stack page of the current process.

Ported from i386.
Signed-off-by: NAndi Kleen <ak@suse.de>