The port->count was used to count the number of macvlan devs
in the same port, but the list vlans could play the same role
to do that, so free the port if the list vlans is empty and
no need to use the parameter count.
Signed-off-by: NDing Tianhong <dingtianhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Netdev_priv is an accessor function, and has no purpose if its result is
not used.

A simplified version of the semantic match that fixes this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@ local idexpression x; @@
-x = netdev_priv(...);
... when != x
// </smpl>
Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Netdev_priv is an accessor function, and has no purpose if its result is
not used.

A simplified version of the semantic match that fixes this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@ local idexpression x; @@
-x = netdev_priv(...);
... when != x
// </smpl>
Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Netdev_priv is an accessor function, and has no purpose if its result is
not used.

A simplified version of the semantic match that fixes this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@ local idexpression x; @@
-x = netdev_priv(...);
... when != x
// </smpl>
Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Netdev_priv is an accessor function, and has no purpose if its result is
not used.

A simplified version of the semantic match that fixes this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@ local idexpression x; @@
-x = netdev_priv(...);
... when != x
// </smpl>
Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Packets need to be at least 64 bytes to enter the switch port logic,
including the FCS, otherwise they will be discarded as RUNT packets.

With packets having Broadcom tags, the 4-bytes tag is first stripped
off the packet, and the packet length is then checked, so we need to
make sure that the packet length with FCS is at least 64 bytes.
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The link adjustment callback can be called as frequently as desired by
the PHY library, as such, let's avoid doing a Read/Modify/Write sequence
if nothing changed, which is more than likely since we are interfaced
with a switch device.
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

These should not have trailing semicolons so remove them.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Alexei Starovoitov says:

====================
internal BPF jit for x64 and JITed seccomp

Internal BPF JIT compiler for x86_64 replaces classic BPF JIT.
Use it in seccomp and in tracing filters (sent as separate patch)
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Take advantage of internal BPF JIT

05-sim-long_jumps.c of libseccomp was used as micro-benchmark:

 seccomp_rule_add_exact(ctx,...
 seccomp_rule_add_exact(ctx,...

 rc = seccomp_load(ctx);

 for (i = 0; i < 10000000; i++)
    syscall(...);

$ sudo sysctl net.core.bpf_jit_enable=1
$ time ./bench
real	0m2.769s
user	0m1.136s
sys	0m1.624s

$ sudo sysctl net.core.bpf_jit_enable=0
$ time ./bench
real	0m5.825s
user	0m1.268s
sys	0m4.548s
Signed-off-by: NAlexei Starovoitov <ast@plumgrid.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Maps all internal BPF instructions into x86_64 instructions.
This patch replaces original BPF x64 JIT with internal BPF x64 JIT.
sysctl net.core.bpf_jit_enable is reused as on/off switch.

Performance:

1. old BPF JIT and internal BPF JIT generate equivalent x86_64 code.
  No performance difference is observed for filters that were JIT-able before

Example assembler code for BPF filter "tcpdump port 22"

original BPF -> old JIT:            original BPF -> internal BPF -> new JIT:
   0:   push   %rbp                      0:     push   %rbp
   1:   mov    %rsp,%rbp                 1:     mov    %rsp,%rbp
   4:   sub    $0x60,%rsp                4:     sub    $0x228,%rsp
   8:   mov    %rbx,-0x8(%rbp)           b:     mov    %rbx,-0x228(%rbp) // prologue
                                        12:     mov    %r13,-0x220(%rbp)
                                        19:     mov    %r14,-0x218(%rbp)
                                        20:     mov    %r15,-0x210(%rbp)
                                        27:     xor    %eax,%eax         // clear A
   c:   xor    %ebx,%ebx                29:     xor    %r13,%r13         // clear X
   e:   mov    0x68(%rdi),%r9d          2c:     mov    0x68(%rdi),%r9d
  12:   sub    0x6c(%rdi),%r9d          30:     sub    0x6c(%rdi),%r9d
  16:   mov    0xd8(%rdi),%r8           34:     mov    0xd8(%rdi),%r10
                                        3b:     mov    %rdi,%rbx
  1d:   mov    $0xc,%esi                3e:     mov    $0xc,%esi
  22:   callq  0xffffffffe1021e15       43:     callq  0xffffffffe102bd75
  27:   cmp    $0x86dd,%eax             48:     cmp    $0x86dd,%rax
  2c:   jne    0x0000000000000069       4f:     jne    0x000000000000009a
  2e:   mov    $0x14,%esi               51:     mov    $0x14,%esi
  33:   callq  0xffffffffe1021e31       56:     callq  0xffffffffe102bd91
  38:   cmp    $0x84,%eax               5b:     cmp    $0x84,%rax
  3d:   je     0x0000000000000049       62:     je     0x0000000000000074
  3f:   cmp    $0x6,%eax                64:     cmp    $0x6,%rax
  42:   je     0x0000000000000049       68:     je     0x0000000000000074
  44:   cmp    $0x11,%eax               6a:     cmp    $0x11,%rax
  47:   jne    0x00000000000000c6       6e:     jne    0x0000000000000117
  49:   mov    $0x36,%esi               74:     mov    $0x36,%esi
  4e:   callq  0xffffffffe1021e15       79:     callq  0xffffffffe102bd75
  53:   cmp    $0x16,%eax               7e:     cmp    $0x16,%rax
  56:   je     0x00000000000000bf       82:     je     0x0000000000000110
  58:   mov    $0x38,%esi               88:     mov    $0x38,%esi
  5d:   callq  0xffffffffe1021e15       8d:     callq  0xffffffffe102bd75
  62:   cmp    $0x16,%eax               92:     cmp    $0x16,%rax
  65:   je     0x00000000000000bf       96:     je     0x0000000000000110
  67:   jmp    0x00000000000000c6       98:     jmp    0x0000000000000117
  69:   cmp    $0x800,%eax              9a:     cmp    $0x800,%rax
  6e:   jne    0x00000000000000c6       a1:     jne    0x0000000000000117
  70:   mov    $0x17,%esi               a3:     mov    $0x17,%esi
  75:   callq  0xffffffffe1021e31       a8:     callq  0xffffffffe102bd91
  7a:   cmp    $0x84,%eax               ad:     cmp    $0x84,%rax
  7f:   je     0x000000000000008b       b4:     je     0x00000000000000c2
  81:   cmp    $0x6,%eax                b6:     cmp    $0x6,%rax
  84:   je     0x000000000000008b       ba:     je     0x00000000000000c2
  86:   cmp    $0x11,%eax               bc:     cmp    $0x11,%rax
  89:   jne    0x00000000000000c6       c0:     jne    0x0000000000000117
  8b:   mov    $0x14,%esi               c2:     mov    $0x14,%esi
  90:   callq  0xffffffffe1021e15       c7:     callq  0xffffffffe102bd75
  95:   test   $0x1fff,%ax              cc:     test   $0x1fff,%rax
  99:   jne    0x00000000000000c6       d3:     jne    0x0000000000000117
                                        d5:     mov    %rax,%r14
  9b:   mov    $0xe,%esi                d8:     mov    $0xe,%esi
  a0:   callq  0xffffffffe1021e44       dd:     callq  0xffffffffe102bd91 // MSH
                                        e2:     and    $0xf,%eax
                                        e5:     shl    $0x2,%eax
                                        e8:     mov    %rax,%r13
                                        eb:     mov    %r14,%rax
                                        ee:     mov    %r13,%rsi
  a5:   lea    0xe(%rbx),%esi           f1:     add    $0xe,%esi
  a8:   callq  0xffffffffe1021e0d       f4:     callq  0xffffffffe102bd6d
  ad:   cmp    $0x16,%eax               f9:     cmp    $0x16,%rax
  b0:   je     0x00000000000000bf       fd:     je     0x0000000000000110
                                        ff:     mov    %r13,%rsi
  b2:   lea    0x10(%rbx),%esi         102:     add    $0x10,%esi
  b5:   callq  0xffffffffe1021e0d      105:     callq  0xffffffffe102bd6d
  ba:   cmp    $0x16,%eax              10a:     cmp    $0x16,%rax
  bd:   jne    0x00000000000000c6      10e:     jne    0x0000000000000117
  bf:   mov    $0xffff,%eax            110:     mov    $0xffff,%eax
  c4:   jmp    0x00000000000000c8      115:     jmp    0x000000000000011c
  c6:   xor    %eax,%eax               117:     mov    $0x0,%eax
  c8:   mov    -0x8(%rbp),%rbx         11c:     mov    -0x228(%rbp),%rbx // epilogue
  cc:   leaveq                         123:     mov    -0x220(%rbp),%r13
  cd:   retq                           12a:     mov    -0x218(%rbp),%r14
                                       131:     mov    -0x210(%rbp),%r15
                                       138:     leaveq
                                       139:     retq

On fully cached SKBs both JITed functions take 12 nsec to execute.
BPF interpreter executes the program in 30 nsec.

The difference in generated assembler is due to the following:

Old BPF imlements LDX_MSH instruction via sk_load_byte_msh() helper function
inside bpf_jit.S.
New JIT removes the helper and does it explicitly, so ldx_msh cost
is the same for both JITs, but generated code looks longer.

New JIT has 4 registers to save, so prologue/epilogue are larger,
but the cost is within noise on x64.

Old JIT checks whether first insn clears A and if not emits 'xor %eax,%eax'.
New JIT clears %rax unconditionally.

2. old BPF JIT doesn't support ANC_NLATTR, ANC_PAY_OFFSET, ANC_RANDOM
  extensions. New JIT supports all BPF extensions.
  Performance of such filters improves 2-4 times depending on a filter.
  The longer the filter the higher performance gain.
  Synthetic benchmarks with many ancillary loads see 20x speedup
  which seems to be the maximum gain from JIT

Notes:

. net.core.bpf_jit_enable=2 + tools/net/bpf_jit_disasm is still functional
  and can be used to see generated assembler

. there are two jit_compile() functions and code flow for classic filters is:
  sk_attach_filter() - load classic BPF
  bpf_jit_compile() - try to JIT from classic BPF
  sk_convert_filter() - convert classic to internal
  bpf_int_jit_compile() - JIT from internal BPF

  seccomp and tracing filters will just call bpf_int_jit_compile()
Signed-off-by: NAlexei Starovoitov <ast@plumgrid.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Split bpf_jit_compile() into two functions to improve readability
of for(pass++) loop. The change follows similar style of JIT compilers
for arm, powerpc, s390

The body of new do_jit() was not reformatted to reduce noise
in this patch, since the following patch replaces most of it.

Tested with BPF testsuite.
Signed-off-by: NAlexei Starovoitov <ast@plumgrid.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Phoebe Buckheister says:

====================
802154: some cleanups and fixes

This series adds some definitions for 802.15.4 header fields that were missing,
changes 6lowpan fragmentation to be aware of security headers and fixes
802.15.4 datagram socket sendmsg(), which was entirely incompliant to date.
Also a few minor changes to mac_cb handling, mark a single-use function static,
and correctly check for EMSGSIZE conditions during wpan_header_create.

Changes since v1:
  * rename mac_cb_alloc to mac_cb_init
  * catch all error cases of sendmsg() instead of only !conn && msg_name
  * redo 6lowpan fragmentation to not clone lower layer headers
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This function is only used within the same translation unit, so mark it
static.
Signed-off-by: NPhoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

802.15.4 datagram sockets do not currently have a compliant sendmsg().
The destination address supplied is always ignored, and in unconnected
mode, packets are broadcast instead of dropped with -EDESTADDRREQ. This
patch fixes 802.15.4 dgram sockets to be compliant, i.e.

 !conn && !msg_name => -EDESTADDRREQ
 !conn &&  msg_name => send to msg_name
  conn && !msg_name => send to connected
  conn &&  msg_name => -EISCONN
Signed-off-by: NPhoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently, 6lowpan creates one 802.15.4 MAC header for the original
packet the device was given by upper layers and reuses this header for
all fragments, if fragmentation is required. This also reuses frame
sequence numbers, which must not happen. 6lowpan also has issues with
fragmentation in the presence of security headers, since those may imply
the presence of trailing fields that are not accounted for by the
fragmentation code right now.

Fix both of these issues by properly allocating fragment skbs with
headromm and tailroom as specified by the underlying device, create one
header for each skb instead of reusing the original header, let the
underlying device do the rest.
Signed-off-by: NPhoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The current mac_cb handling of ieee802154 is rather awkward and limited.
Decompose the single flags field into multiple fields with the meanings
of each subfield of the flags field to make future extensions (for
example, link-layer security) easier. Also don't set the frame sequence
number in upper layers, since that's a thing the MAC is supposed to set
on frame transmit - we set it on header creation, but assuming that
upper layers do not blindly duplicate our headers, this is fine.
Signed-off-by: NPhoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The current WPAN header creation code checks for EMSGSIZE conditions,
but does not account for the MIC field that link layer security may add
at the end of the frame. Now that we can accurately calculate the
maximum payload size of packets, use that to check for EMSGSIZE
conditions.
Signed-off-by: NPhoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When dealing with 802.15.4, one often has to know the maximum payload
size for a given packet. This depends on many factors, one of which is
whether or not a security header is present in the frame. These
definitions and functions provide an easy way for any upper layer to
calculate the maximum payload size for a packet. The first obvious user
for this is 6lowpan, which duplicates this calculation and gets it
partially wrong because it ignores security headers.
Signed-off-by: NPhoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This unifies the behaviour with other network device drivers and
allows for a matching of the PCI device path in UDEV rules.
Signed-off-by: NMarkus Lottmann <markus.lottmann1986@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

> include/net/ip.h:211:5: warning: "CONFIG_SYSCTL" is not defined [-Wundef]
>  #if CONFIG_SYSCTL
>      ^
Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

George Cherian says:

====================
TI CPSW Cleanup

This series does some minimal cleanups.
	-Conversion of pr_*() to dev_*()
	-Convert kzalloc to devm_kzalloc.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Convert kzalloc() to devm_kzalloc().
Signed-off-by: NGeorge Cherian <george.cherian@ti.com>
Reviewed-by: NFelipe Balbi <balbi@ti.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Convert the lone pr_err() to dev_err() call.
Signed-off-by: NGeorge Cherian <george.cherian@ti.com>
Reviewed-by: NFelipe Balbi <balbi@ti.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Convert all pr_*() calls to dev_*() calls.
No functional changes.
Signed-off-by: NGeorge Cherian <george.cherian@ti.com>
Reviewed-by: NFelipe Balbi <balbi@ti.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Sparse was reporting quite a few warnings for the driver.
Those get fixed by this patch.
Signed-off-by: NDariusz Marcinkiewicz <reksio@newterm.pl>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Missing a colon on definition use is a bit odd so
change the macro for the 32 bit case to declare an
__attribute__((unused)) and __deprecated variable.

The __deprecated attribute will cause gcc to emit
an error if the variable is actually used.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use devm_ioremap_resource() because devm_request_and_ioremap() is
obsoleted by devm_ioremap_resource().
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Acked-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Or Gerlitz says:

====================
Mellanox driver update 2014-05-12

This patchset introduce some small bug fixes:

Eyal fixed some compilation and syntactic checkers warnings. Ido fixed a
coruption in user priority mapping when changing number of channels. Shani
fixed some other problems when modifying MAC address. Yuval fixed a problem
when changing IRQ affinity during high traffic - IRQ changes got effective
only after the first pause in traffic.

This patchset was tested and applied over commit 93dccc59: "mdio_bus: fix
devm_mdiobus_alloc_size export"

Changes from V1:
- applied feedback from Dave to use true/false and not 0/1 in patch 1/9
- removed the patch from Noa which adddressed a bug in flow steering table
  when using a bond device, as the fix might need to be in the bonding driver,
  this is now dicussed in the netdev thread "bonding directly changes
  underlying device address"

Changes from V0:
- Patch 1/9 - net/mlx4_core: Enforce irq affinity changes immediatly
  - Moved the new members to a hot cache line as Eric suggested
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Adopt the "info: why not propagate 'ret' from parse_trans_rule()..."
suggestion made by the smatch semantic checker on:
drivers/net/ethernet/mellanox/mlx4/mcg.c:867 mlx4_flow_attach()
Signed-off-by: NEyal Perry <eyalpe@mellanox.com>
Signed-off-by: NAmir Vadai <amirv@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Using a positive value for error: MLX4_NET_TRANS_RULE_NUM instead
of -EPROTONOSUPPORT, to remove compilation warning.
Signed-off-by: NEyal Perry <eyalpe@mellanox.com>
Signed-off-by: NAmir Vadai <amirv@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This Patches solves an issue that could raise when modifying the
device's MAC. It occurs due to a simultaneous access to priv->mac_hash
from two contexts. The buggy scenario described below:
Context 1: copy the new mac address to the dev->dev_addr field.
Context 2: mlx4_en_do_uc_filter removes prev_mac entry from the mac_hash
           db since it is not in dev->uc and not equal to dev->dev_addr.
Context 1: mlx4_en_do_set_mac() calls mlx4_en_replace_mac() to replace
           prev_mac with dev_addr but it fails to update the mac_hash db
           since it no longer contains prev_mac, therefore it returns
           with an error.

The fix is to prevent mlx4_en_do_uc_filter from being executed by both
of the context 1 calls described above, This is done by putting them
both under the mdev->state_lock lock, it will solve this issue since
mlx4_en_do_uc_filter is already protected by the mdev->state_lock.
Reviewed-by: NEyal Perry <eyalpe@mellanox.com>
Signed-off-by: NShani Michaeli <shanim@mellanox.com>
Signed-off-by: NAmir Vadai <amirv@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix the "warn: suspicious bitop condition" made by the smatch semantic
checker on:
drivers/net/ethernet/mellanox/mlx4/main.c:509 mlx4_slave_cap()
Signed-off-by: NEyal Perry <eyalpe@mellanox.com>
Signed-off-by: NAmir Vadai <amirv@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix the "error: we previously assumed 'out_param' could be null" found
by smatch semantic checker on:
drivers/net/ethernet/mellanox/mlx4/cmd.c:506 mlx4_cmd_poll()
drivers/net/ethernet/mellanox/mlx4/cmd.c:578 mlx4_cmd_wait()
Signed-off-by: NEyal Perry <eyalpe@mellanox.com>
Signed-off-by: NAmir Vadai <amirv@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch fix an issue that happen when changing the MAC address when
the port is down, described as follows:
1. Set the port down.
2. Change the MAC address - mlx4_en_set_mac() will change dev->dev_addr.
3. Set the port up - will result in mlx4_en_do_uc_filter that will
   remove the prev_mac entry from the mac_hash db.
4. Changing the MAC address again will eventually trigger the call to
   mlx4_en_replace_mac() in order to replace prev_mac with dev_addr but
   the prev_mac entry is already not exist in the mac_hash db therefore
   the operation fails.

The fix is to set the prev_mac with the new MAC address so in step 3
above, after setting the port up mlx4_en_get_qp() is updating the
mac_hash with the entry of dev_addr which is equal to prev_mac.
Therefore in step 4, when calling mlx4_en_replace_mac, the entry related
to prev_mac exist in mac_hash and the replace operation succeed.
Reviewed-by: NEyal Perry <eyalpe@mellanox.com>
Signed-off-by: NShani Michaeli <shanim@mellanox.com>
Signed-off-by: NAmir Vadai <amirv@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When using ethtool set_channels, mlx4_en_setup_tc is always called, even
when it was not configured. Fixed code to call mlx4_en_setup_tc() only
if needed.
Signed-off-by: NIdo Shamay <idos@mellanox.com>
Signed-off-by: NAmir Vadai <amirv@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

During heavy traffic, napi is constatntly polling the complition queue
and no interrupt is fired. Because of that, changes to irq affinity are
ignored until traffic is stopped and resumed.

By registering to the irq notifier mechanism, and forcing interrupt when
affinity is changed, irq affinity changes will be immediatly enforced.
Signed-off-by: NYuval Atias <yuvala@mellanox.com>
Signed-off-by: NAmir Vadai <amirv@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When the physical MTU changes we should ensure that all existing MACVLAN
dev MTU do not exceed the new lowerdev MTU. This patch adds that
propagation.
Signed-off-by: NDing Tianhong <dingtianhong@huawei.com>
Reviewed-by: NJiri Pirko <jiri@resnulli.us>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In Documentation/networking/dccp.txt points that request_retries
should be greater than 0. So make the extra1 to be &one instead
of &zero.
Signed-off-by: NWang Weidong <wangweidong1@huawei.com>
Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fengguang reported the following sparse warning:

>> net/ipv6/proc.c:198:41: sparse: incorrect type in argument 1 (different address spaces)
   net/ipv6/proc.c:198:41:    expected void [noderef] <asn:3>*mib
   net/ipv6/proc.c:198:41:    got void [noderef] <asn:3>**pcpumib

Fixes: commit 698365fa (net: clean up snmp stats code)
Reported-by: NFengguang Wu <fengguang.wu@intel.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>