Marking PCH transcoder FIFO underrun reporting as disabled for
transcoder B/C on LPT-H will block us from enabling the south error
interrupt. So let's only mark transcoder A underrun reporting as
disabled initially.

This is a little tricky to hit since you need a machine with LPT-H, and
the BIOS must enable either pipe B or C at boot. Then i915 would mark
the "transcoder B/C" underrun reporting as disabled and never enable it
again, meaning south interrupts would never get enabled either. The only
other interrupt in there is actually the poison interrupt which, if we
could ever trigger it, would just result in a little error in dmesg.

Here's the resulting change in SDEIMR on my HSW when I boot it with
multiple displays attached:
- (0x000c4004): 0xf115ffff
+ (0x000c4004): 0xf114ffff

My previous attempt [1] tried to fix this a little differently, but
Daniel requested I do this instead.

[1] https://lists.freedesktop.org/archives/intel-gfx/2015-November/081420.html

Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470416417-15021-1-git-send-email-ville.syrjala@linux.intel.comReviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

intel_enable_pipe() looks rather confusing when one side doesn't have
the curly braces, and the other one does. And what's even worse,
there's another if-else inside the braceless side. Let's put braces
around it to make it clear which branch goes where.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470418894-1249-1-git-send-email-ville.syrjala@linux.intel.comReviewed-by: NChris Wilson <chris@chris-wilson.co.uk>

When using RCU lookup for the request, commit 0eafec6d ("drm/i915:
Enable lockless lookup of request tracking via RCU"), we acknowledge that
we may race with another thread that could have reallocated the request.
In order for the first thread not to blow up, the second thread must not
clear the request completed before overwriting it. In the RCU lookup, we
allow for the engine/seqno to be replaced but we do not allow for it to
be zeroed.

The choice we make is to either add extra checking to the RCU lookup, or
embrace the inherent races (as intended). It is more complicated as we
need to manually clear everything we depend upon being zero initialised,
but we benefit from not emiting the memset() to clear the entire
frequently allocated structure (that memset turns up in throughput
profiles). And at the same time, the lookup remains flexible for future
adjustments.

v2: Old style LRC requires another variable to be initialize. (The
danger inherent in not zeroing everything.)
v3: request->batch also needs to be cleared
v4: signaling.tsk is no long used unset, but pid still exists

Fixes: 0eafec6d ("drm/i915: Enable lockless lookup of request...")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: "Goel, Akash" <akash.goel@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1470731014-6894-2-git-send-email-chris@chris-wilson.co.uk

In the debate as to whether the second read of active->request is
ordered after the dependent reads of the first read of active->request,
just give in and throw a smp_rmb() in there so that ordering of loads is
assured.

v2: Explain the manual smp_rmb()
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1470731014-6894-1-git-send-email-chris@chris-wilson.co.uk

When we force the cleanup after a GPU hang, we want to retire all
requests, or else we may leak them if truly wedged (and the GPU never
advances again). Converting to the active request helpers had the issue
of doing the check against busyness before reporting the request, so if
we claim the GPU had hung but this engine hadn't we could potential skip
the request cleanup - triggering the self-check BUG.

Fixes: dcff85c8 ("drm/i915: Enable i915_gem_wait_for_idle() ...")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1470728222-10243-3-git-send-email-chris@chris-wilson.co.uk

As we do the lockdep protected RCU lookup in a couple of places,
refactor that code to a common helper i915_gem_active_raw().
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1470728222-10243-2-git-send-email-chris@chris-wilson.co.uk

This was originally introduced to be used by the busy-ioctl, but in the
end busy ioctl performed a different dance. Since there are no users,
and no likely users, remove an unwanted chunk of the API.
Suggested-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1470728222-10243-1-git-send-email-chris@chris-wilson.co.ukReviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

In i915_ggtt_cleanup_hw we need to remember to free aliasing_ppgtt. This
fixes the following kmemleak message:

unreferenced object 0xffff880213cca000 (size 8192):
  comm "modprobe", pid 1298, jiffies 4294745402 (age 703.930s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<ffffffff817c808e>] kmemleak_alloc+0x4e/0xb0
    [<ffffffff8121f9c2>] kmem_cache_alloc_trace+0x142/0x1d0
    [<ffffffffa06d11ef>] i915_gem_init_ggtt+0x10f/0x210 [i915]
    [<ffffffffa06d71bb>] i915_gem_init+0x5b/0xd0 [i915]
    [<ffffffffa069749a>] i915_driver_load+0x97a/0x1460 [i915]
    [<ffffffffa06a26ef>] i915_pci_probe+0x4f/0x70 [i915]
    [<ffffffff81423015>] local_pci_probe+0x45/0xa0
    [<ffffffff81424463>] pci_device_probe+0x103/0x150
    [<ffffffff81515e6c>] driver_probe_device+0x22c/0x440
    [<ffffffff81516151>] __driver_attach+0xd1/0xf0
    [<ffffffff8151379c>] bus_for_each_dev+0x6c/0xc0
    [<ffffffff8151555e>] driver_attach+0x1e/0x20
    [<ffffffff81514fa3>] bus_add_driver+0x1c3/0x280
    [<ffffffff81516aa0>] driver_register+0x60/0xe0
    [<ffffffff8142297c>] __pci_register_driver+0x4c/0x50
    [<ffffffffa013605b>] 0xffffffffa013605b
Signed-off-by: NMatthew Auld <matthew.auld@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Fixes: b18b6bde ("drm/i915/bdw: Free PPGTT struct")
Cc: stable@vger.kernel.org
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1470420280-21417-1-git-send-email-matthew.auld@intel.com

~jiffie and a few usecs is 3 orders of magnitude different. A bit
much. This was changed in

commit ca5b721e
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Fri Dec 11 11:32:58 2015 +0000

    drm/i915: Limit the busy wait on requests to 5us not 10ms!

But probably missed the comment since the change was non-local to the
comment.

v2: Polish comment more (Chris).

Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470413484-23775-1-git-send-email-daniel.vetter@ffwll.ch

No functional change. Instead of defining a new empty function
let's use what is available on drm.

It gets cleaner, and easy to read, and understand.
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>

Copy to user return the number of bytes it couldn't write
and zero on success. So any number different than 0 should
be considered a fault, not only when it doesn't write
the full size.

v2: fixed the inverted logic. (Ville)

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>

This reverts commit f64425a8.

active_streams will get totally out of whack with SST unless we
sync up with the hw state at readout, obviously! We don't yet
do that, so now the WARNs fire all the time. Let's revert :(
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470413142-26402-1-git-send-email-ville.syrjala@linux.intel.com
References: https://bugs.freedesktop.org/show_bug.cgi?id=95472#c14Acked-by: NChris Wilson <chris@chris-wilson.co.uk>

As pointed out by Chris Harris, we are using the wrong WA name, it
should in fact be WaToEnableHwFixForPushConstHWBug, also it should be
applied from C0 onwards for both BXT and KBL.

Fixes: 7b9005cd ("drm/i915: Add WaInsertDummyPushConstP for bxt and kbl")

Cc: Chris Harris <chris.harris@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reported-by: NChris Harris <chris.harris@intel.com>
Signed-off-by: NMatthew Auld <matthew.auld@intel.com>
Reviewed-by: NArun Siluvery <arun.siluvery@linux.intel.com>
Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470127013-29653-1-git-send-email-matthew.auld@intel.com

With all callers now not playing tricks with dropping the struct_mutex
between waiting and retiring, we can assert that the request is ready to
be retired.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470388464-28458-19-git-send-email-chris@chris-wilson.co.uk

In the previous commit, we moved the obj->tiling_mode out of a bitfield
and into its own integer so that we could safely use READ_ONCE(). Let us
now repair some of that damage by sharing the tiling_mode with its
companion, the fence stride.

v2: New magic
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470388464-28458-18-git-send-email-chris@chris-wilson.co.uk

Through the GTT interface to the fence registers, we can only handle
linear, X and Y tiling. The more esoteric tiling patterns are ignored.
Document that the tiling ABI only supports upto Y tiling, and reject any
attempts to set a tiling mode other than NONE, X or Y.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470388464-28458-17-git-send-email-chris@chris-wilson.co.uk

Since we are not concerned with userspace racing itself with set-tiling
(the order is indeterminant even if we take a lock), then we can safely
read back the single obj->tiling_mode and do the static lookup of
swizzle mode without having to take a lock.

get-tiling is reasonably frequent due to the back-channel passing around
of tiling parameters in DRI2/DRI3.

v2: Make tiling_mode a full unsigned int so that we can trivially use it
with READ_ONCE(). Separating it out into manual control over the flags
field was too noisy for a simple patch. Note that we could use the lower
bits of obj->stride for the tiling mode.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470388464-28458-16-git-send-email-chris@chris-wilson.co.uk

We don't need to incur the overhead of checking whether the object is
pinned prior to changing its madvise. If the object is pinned, the
madvise will not take effect until it is unpinned and so we cannot free
the pages being pointed at by hardware. Marking a pinned object with
allocated pages as DONTNEED will not trigger any undue warnings. The check
is therefore superfluous, and by removing it we can remove a linear walk
over all the vma the object has.

Still despite it being an overzealous check, that error code is part of
the current ABI and so we must proceed with caution.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470388464-28458-15-git-send-email-chris@chris-wilson.co.uk

We only need to take the struct_mutex if the object is pinned to the
display engine and so requires checking for clflush. (The race with
userspace pinning the object to a framebuffer is irrelevant.)

v2: Use access once for compiler hints (or not as it is a bitfield)
v3: READ_ONCE, obj->pin_display is not a bitfield anymore
v4: Don't be creative with goto.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470388464-28458-14-git-send-email-chris@chris-wilson.co.uk

By applying the same logic as for wait-ioctl, we can query whether a
request has completed without holding struct_mutex. The biggest impact
system-wide is removing the flush_active and the contention that causes.

Testcase: igt/gem_busy
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Akash Goel <akash.goel@intel.com>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470388464-28458-13-git-send-email-chris@chris-wilson.co.uk

With a bit of care (and leniency) we can iterate over the object and
wait for previous rendering to complete with judicial use of atomic
reference counting. The ABI requires us to ensure that an active object
is eventually flushed (like the busy-ioctl) which is guaranteed by our
management of requests (i.e. everything that is submitted to hardware is
flushed in the same request). All we have to do is ensure that we can
detect when the requests are complete for reporting when the object is
idle (without triggering ETIME), locklessly - this is handled by
i915_gem_active_wait_unlocked().

The impact of this is actually quite small - the return to userspace
following the wait was already lockless and so we don't see much gain in
latency improvement upon completing the wait. What we do achieve here is
completing an already finished wait without hitting the struct_mutex,
our hold is quite short and so we are typically just a victim of
contention rather than a cause - but it is still one less contention
point!

v2: Break up a long line.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470388464-28458-12-git-send-email-chris@chris-wilson.co.uk

If we try and read or write to an active request, we first must wait
upon the GPU completing that request. Let's do that without holding the
mutex (and so allow someone else to access the GPU whilst we wait). Upon
completion, we will acquire the mutex and only then start the operation
(i.e. we do not rely on state from before the initial wait).

v2: Repaint the goto labels
v3: Move the tracepoints back to the start of the ioctls
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470388464-28458-11-git-send-email-chris@chris-wilson.co.uk

After removing the user of this wart, we can remove the wart entirely.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470388464-28458-10-git-send-email-chris@chris-wilson.co.uk

If we make the observation that mmap-offsets are only released when we
free an object, we can then deduce that the shrinker only creates free
space in the mmap arena indirectly by flushing the request list and
freeing expired objects. If we combine this with the lockless
vma-manager and lockless idling, we can avoid taking our big struct_mutex
until we need to actually free the requests.

One side-effect is that we defer the madvise checking until we need the
pages (i.e. the fault handler). This brings us into line with the other
delayed checks (and madvise in general).

v2: s/ret/err/ and use if (!err) rather than if (ret == 0)
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470388464-28458-9-git-send-email-chris@chris-wilson.co.uk

We can now wait for the GPU (all engines) to become idle without
requiring the struct_mutex. Inside the shrinker, we need to currently
take the struct_mutex in order to purge objects and to purge the objects
we need the GPU to be idle - causing a stall whilst we hold the
struct_mutex. We can hide most of that stall by performing the wait
before taking the struct_mutex and only doing essential waits for
new rendering on objects to be freed.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470388464-28458-8-git-send-email-chris@chris-wilson.co.uk

Now that we pass along the expected interruptible nature for the
wait-for-idle, we do not need to modify the global
i915->mm.interruptible for this single call. (Only the immediate call to
i915_gem_wait_for_idle() takes the interruptible status as the other
action, dma_map_sg(), is independent of i915.ko)
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470388464-28458-7-git-send-email-chris@chris-wilson.co.uk

The principal motivation for this was to try and eliminate the
struct_mutex from i915_gem_suspend - but we still need to hold the mutex
current for the i915_gem_context_lost(). (The issue there is that there
may be an indirect lockdep cycle between cpu_hotplug (i.e. suspend) and
struct_mutex via the stop_machine().) For the moment, enabling last
request tracking for the engine, allows us to do busyness checking and
waiting without requiring the struct_mutex - which is useful in its own
right.

As a side-effect of having a robust means for tracking engine busyness,
we can replace our other busyness heuristic, that of comparing against
the last submitted seqno. For paranoid reasons, we have a semi-ordered
check of that seqno inside the hangchecker, which we can now improve to
an ordered check of the engine's busyness (removing a locked xchg in the
process).

v2: Pass along "bool interruptible" as being unlocked we cannot rely on
i915->mm.interruptible being stable or even under our control.
v3: Replace check Ironlake i915_gpu_busy() with the common precalculated value
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470388464-28458-6-git-send-email-chris@chris-wilson.co.uk

Before suspending (or unloading), we would first wait upon all rendering
to be completed and then disable the rings. This later step is a remanent
from DRI1 days when we did not use request tracking for all operations
upon the ring. Now that we are sure we are waiting upon the very last
operation by the engine, we can forgo clobbering the ring registers,
though we do keep the assert that the engine is indeed idle before
sleeping.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470388464-28458-5-git-send-email-chris@chris-wilson.co.uk

Inside the kthread context, we can't be interrupted by signals so
touching the mm.interruptible flag is pointless and wait-request now
consumes EIO itself.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470388464-28458-4-git-send-email-chris@chris-wilson.co.uk

We can completely avoid taking the struct_mutex around the non-blocking
waits by switching over to the RCU request management (trading the mutex
for a RCU read lock and some complex atomic operations). The improvement
is that we gain further contention reduction, and overall the code
become simpler due to the reduced mutex dancing.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470388464-28458-3-git-send-email-chris@chris-wilson.co.uk

We can completely avoid taking the struct_mutex around the non-blocking
waits by switching over to the RCU request management (trading the mutex
for a RCU read lock and some complex atomic operations). The improvement
is that we gain further contention reduction, and overall the code
become simpler due to the reduced mutex dancing.

v2: Move i915_gem_fault tracepoint back to the start of the function,
before the unlocked wait.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470388464-28458-2-git-send-email-chris@chris-wilson.co.uk

It is useful to be able to wait on pending rendering without grabbing
the struct_mutex. We can do this by using the i915_gem_active_get_rcu()
primitive to acquire a reference to the pending request without
requiring struct_mutex, just the RCU read lock, and then call
i915_wait_request().

v2: Rebase onto new i915_gem_active_get_unlocked() semantics that take
the RCU read lock on behalf of the caller.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470388464-28458-1-git-send-email-chris@chris-wilson.co.uk

Backmerge the 4.8 pull request state from Dave - conflicts were
getting out of hand, and Chris has some patches which outright don't
apply without everything merged together again.
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>

The spec was recently fixed to have the correct iboost setting for the
SKL Y/U DP DDI buffer translation table entry 2. Update our tables
to match.

Cc: David Weinehall <david.weinehall@linux.intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470140517-13011-1-git-send-email-ville.syrjala@linux.intel.com
Cc: stable@vger.kernel.org
Reviewed-by: NDavid Weinehall <david.weinehall@linux.intel.com>

The bspec was updated a couple weeks ago to add an extra block per line
to plane watermark calculations for linear pixel formats.

Bspec update 115327 description:
  "Gen9+ - Updated the plane blocks per line calculation for linear
  cases. Adds +1 for all linear cases to handle the non-block aligned
  stride cases."

Cc: Lyude <cpaul@redhat.com>
Cc: drm-intel-fixes@lists.freedesktop.org
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470344880-27394-1-git-send-email-matthew.d.roper@intel.comReviewed-by: NLyude <cpaul@redhat.com>

If the GEM objects being rendered with in this request have been
exported via dma-buf to a third party, hook ourselves into the dma-buf
reservation object so that the third party can serialise with our
rendering via the dma-buf fences.

Testcase: igt/prime_busy
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1470324762-2545-26-git-send-email-chris@chris-wilson.co.uk

If we enable RCU for the requests (providing a grace period where we can
inspect a "dead" request before it is freed), we can allow callers to
carefully perform lockless lookup of an active request.

However, by enabling deferred freeing of requests, we can potentially
hog a lot of memory when dealing with tens of thousands of requests per
second - with a quick insertion of a synchronize_rcu() inside our
shrinker callback, that issue disappears.

v2: Currently, it is our responsibility to handle reclaim i.e. to avoid
hogging memory with the delayed slab frees. At the moment, we wait for a
grace period in the shrinker, and block for all RCU callbacks on oom.
Suggested alternatives focus on flushing our RCU callback when we have a
certain number of outstanding request frees, and blocking on that flush
after a second high watermark. (So rather than wait for the system to
run out of memory, we stop issuing requests - both are nondeterministic.)

Paul E. McKenney wrote:

Another approach is synchronize_rcu() after some largish number of
requests.  The advantage of this approach is that it throttles the
production of callbacks at the source.  The corresponding disadvantage
is that it slows things up.

Another approach is to use call_rcu(), but if the previous call_rcu()
is still in flight, block waiting for it.  Yet another approach is
the get_state_synchronize_rcu() / cond_synchronize_rcu() pair.  The
idea is to do something like this:

        cond_synchronize_rcu(cookie);
        cookie = get_state_synchronize_rcu();

You would of course do an initial get_state_synchronize_rcu() to
get things going.  This would not block unless there was less than
one grace period's worth of time between invocations.  But this
assumes a busy system, where there is almost always a grace period
in flight.  But you can make that happen as follows:

        cond_synchronize_rcu(cookie);
        cookie = get_state_synchronize_rcu();
        call_rcu(&my_rcu_head, noop_function);

Note that you need additional code to make sure that the old callback
has completed before doing a new one.  Setting and clearing a flag
with appropriate memory ordering control suffices (e.g,. smp_load_acquire()
and smp_store_release()).

v3: More comments on compiler and processor order of operations within
the RCU lookup and discover we can use rcu_access_pointer() here instead.

v4: Wrap i915_gem_active_get_rcu() to take the rcu_read_lock itself.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: "Goel, Akash" <akash.goel@intel.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1470324762-2545-25-git-send-email-chris@chris-wilson.co.uk

Just move it earlier so that we can use the companion nonblocking
version in a couple of more callsites without having to add a forward
declaration.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470324762-2545-24-git-send-email-chris@chris-wilson.co.uk

We are motivated to avoid using a bitfield for obj->active for a couple
of reasons. Firstly, we wish to document our lockless read of obj->active
using READ_ONCE inside i915_gem_busy_ioctl() and that requires an
integral type (i.e. not a bitfield). Secondly, gcc produces abysmal code
when presented with a bitfield and that shows up high on the profiles of
request tracking (mainly due to excess memory traffic as it converts
the bitfield to a register and back and generates frequent AGI in the
process).

v2: BIT, break up a long line in compute the other engines, new paint
for i915_gem_object_is_active (now i915_gem_object_get_active).
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470324762-2545-23-git-send-email-chris@chris-wilson.co.uk