Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 25 6月, 2009 2 次提交
  3. 24 6月, 2009 2 次提交
    • P
      rcu: Remove Classic RCU · c17ef453
      由 Paul E. McKenney 提交于 
      Remove Classic RCU, given that the combination of Tree RCU and
the proposed Bloatwatch RCU do everything that Classic RCU can
with fewer bugs.

Tree RCU has been default in x86 builds for almost six months,
and seems to be quite reliable, so there does not seem to be
much justification for keeping the Classic RCU code and config
complexity around anymore.
Signed-off-by: NPaul E. McKenney <paulmck@linux.ibm.com>
Cc: akpm@linux-foundation.org
Cc: niv@us.ibm.com
Cc: dvhltc@us.ibm.com
Cc: dipankar@in.ibm.com
Cc: dhowells@redhat.com
Cc: lethal@linux-sh.org
Cc: kernel@wantstofly.org
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      c17ef453
    • E
      audit: seperate audit inode watches into a subfile · cfcad62c
      由 Eric Paris 提交于 
      In preparation for converting audit to use fsnotify instead of inotify we
seperate the inode watching code into it's own file.  This is similar to
how the audit tree watching code is already seperated into audit_tree.c
Signed-off-by: NEric Paris <eparis@redhat.com>
      cfcad62c
  5. 19 6月, 2009 1 次提交
    • P
      gcov: add gcov profiling infrastructure · 2521f2c2
      由 Peter Oberparleiter 提交于 
      Enable the use of GCC's coverage testing tool gcov [1] with the Linux
kernel.  gcov may be useful for:

 * debugging (has this code been reached at all?)
 * test improvement (how do I change my test to cover these lines?)
 * minimizing kernel configurations (do I need this option if the
   associated code is never run?)

The profiling patch incorporates the following changes:

 * change kbuild to include profiling flags
 * provide functions needed by profiling code
 * present profiling data as files in debugfs

Note that on some architectures, enabling gcc's profiling option
"-fprofile-arcs" for the entire kernel may trigger compile/link/
run-time problems, some of which are caused by toolchain bugs and
others which require adjustment of architecture code.

For this reason profiling the entire kernel is initially restricted
to those architectures for which it is known to work without changes.
This restriction can be lifted once an architecture has been tested
and found compatible with gcc's profiling. Profiling of single files
or directories is still available on all platforms (see config help
text).

[1] http://gcc.gnu.org/onlinedocs/gcc/Gcov.htmlSigned-off-by: NPeter Oberparleiter <oberpar@linux.vnet.ibm.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Li Wei <W.Li@Sun.COM>
Cc: Michael Ellerman <michaele@au1.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Heiko Carstens <heicars2@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <mschwid2@linux.vnet.ibm.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: WANG Cong <xiyou.wangcong@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      2521f2c2
  7. 17 6月, 2009 1 次提交
  9. 15 4月, 2009 1 次提交
    • I
      tracing: make the trace clocks available generally · 56449f43
      由 Ingo Molnar 提交于 
      Jeremy Fitzhardinge reported this build failure:

 LD	 .tmp_vmlinux1
 arch/x86/kernel/built-in.o: In function `ds_take_timestamp':
 git/linux/arch/x86/kernel/ds.c:1380: undefined reference to `trace_clock_global'
 git/linux/arch/x86/kernel/ds.c:1380: undefined reference to `trace_clock_global'

Which is due to !CONFIG_TRACING && CONFIG_X86_DS=y.

Expose the trace clock code to CONFIG_X86_DS as well.

[ Unfortunately librarizing doesnt work well - ancient architectures
  with no raw_local_irq_save() primitive break the build. ]
Reported-by: NJeremy Fitzhardinge <jeremy@goop.org>
LKML-Reference: <49E4413F.7070700@goop.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      56449f43
  11. 03 4月, 2009 1 次提交
  13. 22 2月, 2009 1 次提交
  15. 19 2月, 2009 1 次提交
  17. 16 1月, 2009 1 次提交
  19. 15 1月, 2009 1 次提交
  21. 11 1月, 2009 1 次提交
  23. 08 1月, 2009 1 次提交
    • A
      async: Asynchronous function calls to speed up kernel boot · 22a9d645
      由 Arjan van de Ven 提交于 
      Right now, most of the kernel boot is strictly synchronous, such that
various hardware delays are done sequentially.

In order to make the kernel boot faster, this patch introduces
infrastructure to allow doing some of the initialization steps
asynchronously, which will hide significant portions of the hardware delays
in practice.

In order to not change device order and other similar observables, this
patch does NOT do full parallel initialization.

Rather, it operates more in the way an out of order CPU does; the work may
be done out of order and asynchronous, but the observable effects
(instruction retiring for the CPU) are still done in the original sequence.
Signed-off-by: NArjan van de Ven <arjan@linux.intel.com>
      22a9d645
  25. 19 12月, 2008 1 次提交
    • P
      "Tree RCU": scalable classic RCU implementation · 64db4cff
      由 Paul E. McKenney 提交于 
      This patch fixes a long-standing performance bug in classic RCU that
results in massive internal-to-RCU lock contention on systems with
more than a few hundred CPUs.  Although this patch creates a separate
flavor of RCU for ease of review and patch maintenance, it is intended
to replace classic RCU.

This patch still handles stress better than does mainline, so I am still
calling it ready for inclusion.  This patch is against the -tip tree.
Nevertheless, experience on an actual 1000+ CPU machine would still be
most welcome.

Most of the changes noted below were found while creating an rcutiny
(which should permit ejecting the current rcuclassic) and while doing
detailed line-by-line documentation.

Updates from v9 (http://lkml.org/lkml/2008/12/2/334):

o	Fixes from remainder of line-by-line code walkthrough,
	including comment spelling, initialization, undesirable
	narrowing due to type conversion, removing redundant memory
	barriers, removing redundant local-variable initialization,
	and removing redundant local variables.

	I do not believe that any of these fixes address the CPU-hotplug
	issues that Andi Kleen was seeing, but please do give it a whirl
	in case the machine is smarter than I am.

	A writeup from the walkthrough may be found at the following
	URL, in case you are suffering from terminal insomnia or
	masochism:

	http://www.kernel.org/pub/linux/kernel/people/paulmck/tmp/rcutree-walkthrough.2008.12.16a.pdf

o	Made rcutree tracing use seq_file, as suggested some time
	ago by Lai Jiangshan.

o	Added a .csv variant of the rcudata debugfs trace file, to allow
	people having thousands of CPUs to drop the data into
	a spreadsheet.	Tested with oocalc and gnumeric.  Updated
	documentation to suit.

Updates from v8 (http://lkml.org/lkml/2008/11/15/139):

o	Fix a theoretical race between grace-period initialization and
	force_quiescent_state() that could occur if more than three
	jiffies were required to carry out the grace-period
	initialization.  Which it might, if you had enough CPUs.

o	Apply Ingo's printk-standardization patch.

o	Substitute local variables for repeated accesses to global
	variables.

o	Fix comment misspellings and redundant (but harmless) increments
	of ->n_rcu_pending (this latter after having explicitly added it).

o	Apply checkpatch fixes.

Updates from v7 (http://lkml.org/lkml/2008/10/10/291):

o	Fixed a number of problems noted by Gautham Shenoy, including
	the cpu-stall-detection bug that he was having difficulty
	convincing me was real.  ;-)

o	Changed cpu-stall detection to wait for ten seconds rather than
	three in order to reduce false positive, as suggested by Ingo
	Molnar.

o	Produced a design document (http://lwn.net/Articles/305782/).
	The act of writing this document uncovered a number of both
	theoretical and "here and now" bugs as noted below.

o	Fix dynticks_nesting accounting confusion, simplify WARN_ON()
	condition, fix kerneldoc comments, and add memory barriers
	in dynticks interface functions.

o	Add more data to tracing.

o	Remove unused "rcu_barrier" field from rcu_data structure.

o	Count calls to rcu_pending() from scheduling-clock interrupt
	to use as a surrogate timebase should jiffies stop counting.

o	Fix a theoretical race between force_quiescent_state() and
	grace-period initialization.  Yes, initialization does have to
	go on for some jiffies for this race to occur, but given enough
	CPUs...

Updates from v6 (http://lkml.org/lkml/2008/9/23/448):

o	Fix a number of checkpatch.pl complaints.

o	Apply review comments from Ingo Molnar and Lai Jiangshan
	on the stall-detection code.

o	Fix several bugs in !CONFIG_SMP builds.

o	Fix a misspelled config-parameter name so that RCU now announces
	at boot time if stall detection is configured.

o	Run tests on numerous combinations of configurations parameters,
	which after the fixes above, now build and run correctly.

Updates from v5 (http://lkml.org/lkml/2008/9/15/92, bad subject line):

o	Fix a compiler error in the !CONFIG_FANOUT_EXACT case (blew a
	changeset some time ago, and finally got around to retesting
	this option).

o	Fix some tracing bugs in rcupreempt that caused incorrect
	totals to be printed.

o	I now test with a more brutal random-selection online/offline
	script (attached).  Probably more brutal than it needs to be
	on the people reading it as well, but so it goes.

o	A number of optimizations and usability improvements:

	o	Make rcu_pending() ignore the grace-period timeout when
		there is no grace period in progress.

	o	Make force_quiescent_state() avoid going for a global
		lock in the case where there is no grace period in
		progress.

	o	Rearrange struct fields to improve struct layout.

	o	Make call_rcu() initiate a grace period if RCU was
		idle, rather than waiting for the next scheduling
		clock interrupt.

	o	Invoke rcu_irq_enter() and rcu_irq_exit() only when
		idle, as suggested by Andi Kleen.  I still don't
		completely trust this change, and might back it out.

	o	Make CONFIG_RCU_TRACE be the single config variable
		manipulated for all forms of RCU, instead of the prior
		confusion.

	o	Document tracing files and formats for both rcupreempt
		and rcutree.

Updates from v4 for those missing v5 given its bad subject line:

o	Separated dynticks interface so that NMIs and irqs call separate
	functions, greatly simplifying it.  In particular, this code
	no longer requires a proof of correctness.  ;-)

o	Separated dynticks state out into its own per-CPU structure,
	avoiding the duplicated accounting.

o	The case where a dynticks-idle CPU runs an irq handler that
	invokes call_rcu() is now correctly handled, forcing that CPU
	out of dynticks-idle mode.

o	Review comments have been applied (thank you all!!!).
	For but one example, fixed the dynticks-ordering issue that
	Manfred pointed out, saving me much debugging.  ;-)

o	Adjusted rcuclassic and rcupreempt to handle dynticks changes.

Attached is an updated patch to Classic RCU that applies a hierarchy,
greatly reducing the contention on the top-level lock for large machines.
This passes 10-hour concurrent rcutorture and online-offline testing on
128-CPU ppc64 without dynticks enabled, and exposes some timekeeping
bugs in presence of dynticks (exciting working on a system where
"sleep 1" hangs until interrupted...), which were fixed in the
2.6.27 kernel.  It is getting more reliable than mainline by some
measures, so the next version will be against -tip for inclusion.
See also Manfred Spraul's recent patches (or his earlier work from
2004 at http://marc.info/?l=linux-kernel&m=108546384711797&w=2).
We will converge onto a common patch in the fullness of time, but are
currently exploring different regions of the design space.  That said,
I have already gratefully stolen quite a few of Manfred's ideas.

This patch provides CONFIG_RCU_FANOUT, which controls the bushiness
of the RCU hierarchy.  Defaults to 32 on 32-bit machines and 64 on
64-bit machines.  If CONFIG_NR_CPUS is less than CONFIG_RCU_FANOUT,
there is no hierarchy.  By default, the RCU initialization code will
adjust CONFIG_RCU_FANOUT to balance the hierarchy, so strongly NUMA
architectures may choose to set CONFIG_RCU_FANOUT_EXACT to disable
this balancing, allowing the hierarchy to be exactly aligned to the
underlying hardware.  Up to two levels of hierarchy are permitted
(in addition to the root node), allowing up to 16,384 CPUs on 32-bit
systems and up to 262,144 CPUs on 64-bit systems.  I just know that I
am going to regret saying this, but this seems more than sufficient
for the foreseeable future.  (Some architectures might wish to set
CONFIG_RCU_FANOUT=4, which would limit such architectures to 64 CPUs.
If this becomes a real problem, additional levels can be added, but I
doubt that it will make a significant difference on real hardware.)

In the common case, a given CPU will manipulate its private rcu_data
structure and the rcu_node structure that it shares with its immediate
neighbors.  This can reduce both lock and memory contention by multiple
orders of magnitude, which should eliminate the need for the strange
manipulations that are reported to be required when running Linux on
very large systems.

Some shortcomings:

o	More bugs will probably surface as a result of an ongoing
	line-by-line code inspection.

	Patches will be provided as required.

o	There are probably hangs, rcutorture failures, &c.  Seems
	quite stable on a 128-CPU machine, but that is kind of small
	compared to 4096 CPUs.  However, seems to do better than
	mainline.

	Patches will be provided as required.

o	The memory footprint of this version is several KB larger
	than rcuclassic.

	A separate UP-only rcutiny patch will be provided, which will
	reduce the memory footprint significantly, even compared
	to the old rcuclassic.  One such patch passes light testing,
	and has a memory footprint smaller even than rcuclassic.
	Initial reaction from various embedded guys was "it is not
	worth it", so am putting it aside.

Credits:

o	Manfred Spraul for ideas, review comments, and bugs spotted,
	as well as some good friendly competition.  ;-)

o	Josh Triplett, Ingo Molnar, Peter Zijlstra, Mathieu Desnoyers,
	Lai Jiangshan, Andi Kleen, Andy Whitcroft, and Andrew Morton
	for reviews and comments.

o	Thomas Gleixner for much-needed help with some timer issues
	(see patches below).

o	Jon M. Tollefson, Tim Pepper, Andrew Theurer, Jose R. Santos,
	Andy Whitcroft, Darrick Wong, Nishanth Aravamudan, Anton
	Blanchard, Dave Kleikamp, and Nathan Lynch for keeping machines
	alive despite my heavy abuse^Wtesting.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      64db4cff
  27. 08 12月, 2008 2 次提交
    • T
      performance counters: core code · 0793a61d
      由 Thomas Gleixner 提交于 
      Implement the core kernel bits of Performance Counters subsystem.

The Linux Performance Counter subsystem provides an abstraction of
performance counter hardware capabilities. It provides per task and per
CPU counters, and it provides event capabilities on top of those.

Performance counters are accessed via special file descriptors.
There's one file descriptor per virtual counter used.

The special file descriptor is opened via the perf_counter_open()
system call:

 int
 perf_counter_open(u32 hw_event_type,
                   u32 hw_event_period,
                   u32 record_type,
                   pid_t pid,
                   int cpu);

The syscall returns the new fd. The fd can be used via the normal
VFS system calls: read() can be used to read the counter, fcntl()
can be used to set the blocking mode, etc.

Multiple counters can be kept open at a time, and the counters
can be poll()ed.

See more details in Documentation/perf-counters.txt.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      0793a61d
    • F
      tracing/function-graph-tracer: introduce __notrace_funcgraph to filter special functions · 8b96f011
      由 Frederic Weisbecker 提交于 
      Impact: trace more functions

When the function graph tracer is configured, three more files are not
traced to prevent only four functions to be traced. And this impacts the
normal function tracer too.

arch/x86/kernel/process_64/32.c:

I had crashes when I let this file traced. After some debugging, I saw
that the "current" task point was changed inside__swtich_to(), ie:
"write_pda(pcurrent, next_p);" inside process_64.c Since the tracer store
the original return address of the function inside current, we had
crashes. Only __switch_to() has to be excluded from tracing.

kernel/module.c and kernel/extable.c:

Because of a function used internally by the function graph tracer:
__kernel_text_address()

To let the other functions inside these files to be traced, this patch
introduces the __notrace_funcgraph function prefix which is __notrace if
function graph tracer is configured and nothing if not.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      8b96f011
  29. 26 11月, 2008 1 次提交
  31. 18 11月, 2008 1 次提交
  33. 14 11月, 2008 1 次提交
  35. 11 11月, 2008 2 次提交
    • F
      tracing, x86: add low level support for ftrace return tracing · caf4b323
      由 Frederic Weisbecker 提交于 
      Impact: add infrastructure for function-return tracing

Add low level support for ftrace return tracing.

This plug-in stores return addresses on the thread_info structure of
the current task.

The index of the current return address is initialized when the task
is the first one (init) and when a process forks (the child). It is
not needed when a task does a sys_execve because after this syscall,
it still needs to return on the kernel functions it called.

Note that the code of return_to_handler has been suggested by Steven
Rostedt as almost all of the ideas of improvements in this V3.

For purpose of security, arch/x86/kernel/process_32.c is not traced
because __switch_to() changes the current task during its execution.
That could cause inconsistency in the stored return address of this
function even if I didn't have any crash after testing with tracing on
this function enabled.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      caf4b323
    • I
      sched: rename SCHED_NO_NO_OMIT_FRAME_POINTER => SCHED_OMIT_FRAME_POINTER · ae1e9130
      由 Ingo Molnar 提交于 
      Impact: cleanup, change .config option name

We had this ugly config name for a long time for hysteric raisons.
Rename it to a saner name.

We still cannot get rid of it completely, until /proc/<pid>/stack
usage replaces WCHAN usage for good.

We'll be able to do that in the v2.6.29/v2.6.30 timeframe.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      ae1e9130
  37. 03 11月, 2008 1 次提交
  39. 21 10月, 2008 1 次提交
  41. 20 10月, 2008 2 次提交
    • M
      container freezer: implement freezer cgroup subsystem · dc52ddc0
      由 Matt Helsley 提交于 
      This patch implements a new freezer subsystem in the control groups
framework.  It provides a way to stop and resume execution of all tasks in
a cgroup by writing in the cgroup filesystem.

The freezer subsystem in the container filesystem defines a file named
freezer.state.  Writing "FROZEN" to the state file will freeze all tasks
in the cgroup.  Subsequently writing "RUNNING" will unfreeze the tasks in
the cgroup.  Reading will return the current state.

* Examples of usage :

   # mkdir /containers/freezer
   # mount -t cgroup -ofreezer freezer  /containers
   # mkdir /containers/0
   # echo $some_pid > /containers/0/tasks

to get status of the freezer subsystem :

   # cat /containers/0/freezer.state
   RUNNING

to freeze all tasks in the container :

   # echo FROZEN > /containers/0/freezer.state
   # cat /containers/0/freezer.state
   FREEZING
   # cat /containers/0/freezer.state
   FROZEN

to unfreeze all tasks in the container :

   # echo RUNNING > /containers/0/freezer.state
   # cat /containers/0/freezer.state
   RUNNING

This is the basic mechanism which should do the right thing for user space
task in a simple scenario.

It's important to note that freezing can be incomplete.  In that case we
return EBUSY.  This means that some tasks in the cgroup are busy doing
something that prevents us from completely freezing the cgroup at this
time.  After EBUSY, the cgroup will remain partially frozen -- reflected
by freezer.state reporting "FREEZING" when read.  The state will remain
"FREEZING" until one of these things happens:

	1) Userspace cancels the freezing operation by writing "RUNNING" to
		the freezer.state file
	2) Userspace retries the freezing operation by writing "FROZEN" to
		the freezer.state file (writing "FREEZING" is not legal
		and returns EIO)
	3) The tasks that blocked the cgroup from entering the "FROZEN"
		state disappear from the cgroup's set of tasks.

[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: export thaw_process]
Signed-off-by: NCedric Le Goater <clg@fr.ibm.com>
Signed-off-by: NMatt Helsley <matthltc@us.ibm.com>
Acked-by: NSerge E. Hallyn <serue@us.ibm.com>
Tested-by: NMatt Helsley <matthltc@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      dc52ddc0
    • M
      container freezer: make refrigerator always available · 8174f150
      由 Matt Helsley 提交于 
      Now that the TIF_FREEZE flag is available in all architectures, extract
the refrigerator() and freeze_task() from kernel/power/process.c and make
it available to all.

The refrigerator() can now be used in a control group subsystem
implementing a control group freezer.
Signed-off-by: NCedric Le Goater <clg@fr.ibm.com>
Signed-off-by: NMatt Helsley <matthltc@us.ibm.com>
Acked-by: NSerge E. Hallyn <serue@us.ibm.com>
Tested-by: NMatt Helsley <matthltc@us.ibm.com>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      8174f150
  43. 14 10月, 2008 1 次提交
    • M
      tracing: Kernel Tracepoints · 97e1c18e
      由 Mathieu Desnoyers 提交于 
      Implementation of kernel tracepoints. Inspired from the Linux Kernel
Markers. Allows complete typing verification by declaring both tracing
statement inline functions and probe registration/unregistration static
inline functions within the same macro "DEFINE_TRACE". No format string
is required. See the tracepoint Documentation and Samples patches for
usage examples.

Taken from the documentation patch :

"A tracepoint placed in code provides a hook to call a function (probe)
that you can provide at runtime. A tracepoint can be "on" (a probe is
connected to it) or "off" (no probe is attached). When a tracepoint is
"off" it has no effect, except for adding a tiny time penalty (checking
a condition for a branch) and space penalty (adding a few bytes for the
function call at the end of the instrumented function and adds a data
structure in a separate section).  When a tracepoint is "on", the
function you provide is called each time the tracepoint is executed, in
the execution context of the caller. When the function provided ends its
execution, it returns to the caller (continuing from the tracepoint
site).

You can put tracepoints at important locations in the code. They are
lightweight hooks that can pass an arbitrary number of parameters, which
prototypes are described in a tracepoint declaration placed in a header
file."

Addition and removal of tracepoints is synchronized by RCU using the
scheduler (and preempt_disable) as guarantees to find a quiescent state
(this is really RCU "classic"). The update side uses rcu_barrier_sched()
with call_rcu_sched() and the read/execute side uses
"preempt_disable()/preempt_enable()".

We make sure the previous array containing probes, which has been
scheduled for deletion by the rcu callback, is indeed freed before we
proceed to the next update. It therefore limits the rate of modification
of a single tracepoint to one update per RCU period. The objective here
is to permit fast batch add/removal of probes on _different_
tracepoints.

Changelog :
- Use #name ":" #proto as string to identify the tracepoint in the
  tracepoint table. This will make sure not type mismatch happens due to
  connexion of a probe with the wrong type to a tracepoint declared with
  the same name in a different header.
- Add tracepoint_entry_free_old.
- Change __TO_TRACE to get rid of the 'i' iterator.

Masami Hiramatsu <mhiramat@redhat.com> :
Tested on x86-64.

Performance impact of a tracepoint : same as markers, except that it
adds about 70 bytes of instructions in an unlikely branch of each
instrumented function (the for loop, the stack setup and the function
call). It currently adds a memory read, a test and a conditional branch
at the instrumentation site (in the hot path). Immediate values will
eventually change this into a load immediate, test and branch, which
removes the memory read which will make the i-cache impact smaller
(changing the memory read for a load immediate removes 3-4 bytes per
site on x86_32 (depending on mov prefixes), or 7-8 bytes on x86_64, it
also saves the d-cache hit).

About the performance impact of tracepoints (which is comparable to
markers), even without immediate values optimizations, tests done by
Hideo Aoki on ia64 show no regression. His test case was using hackbench
on a kernel where scheduler instrumentation (about 5 events in code
scheduler code) was added.

Quoting Hideo Aoki about Markers :

I evaluated overhead of kernel marker using linux-2.6-sched-fixes git
tree, which includes several markers for LTTng, using an ia64 server.

While the immediate trace mark feature isn't implemented on ia64, there
is no major performance regression. So, I think that we don't have any
issues to propose merging marker point patches into Linus's tree from
the viewpoint of performance impact.

I prepared two kernels to evaluate. The first one was compiled without
CONFIG_MARKERS. The second one was enabled CONFIG_MARKERS.

I downloaded the original hackbench from the following URL:
http://devresources.linux-foundation.org/craiger/hackbench/src/hackbench.c

I ran hackbench 5 times in each condition and calculated the average and
difference between the kernels.

    The parameter of hackbench: every 50 from 50 to 800
    The number of CPUs of the server: 2, 4, and 8

Below is the results. As you can see, major performance regression
wasn't found in any case. Even if number of processes increases,
differences between marker-enabled kernel and marker- disabled kernel
doesn't increase. Moreover, if number of CPUs increases, the differences
doesn't increase either.

Curiously, marker-enabled kernel is better than marker-disabled kernel
in more than half cases, although I guess it comes from the difference
of memory access pattern.

* 2 CPUs

Number of | without      | with         | diff     | diff    |
processes | Marker [Sec] | Marker [Sec] |   [Sec]  |   [%]   |
--------------------------------------------------------------
       50 |      4.811   |       4.872  |  +0.061  |  +1.27  |
      100 |      9.854   |      10.309  |  +0.454  |  +4.61  |
      150 |     15.602   |      15.040  |  -0.562  |  -3.6   |
      200 |     20.489   |      20.380  |  -0.109  |  -0.53  |
      250 |     25.798   |      25.652  |  -0.146  |  -0.56  |
      300 |     31.260   |      30.797  |  -0.463  |  -1.48  |
      350 |     36.121   |      35.770  |  -0.351  |  -0.97  |
      400 |     42.288   |      42.102  |  -0.186  |  -0.44  |
      450 |     47.778   |      47.253  |  -0.526  |  -1.1   |
      500 |     51.953   |      52.278  |  +0.325  |  +0.63  |
      550 |     58.401   |      57.700  |  -0.701  |  -1.2   |
      600 |     63.334   |      63.222  |  -0.112  |  -0.18  |
      650 |     68.816   |      68.511  |  -0.306  |  -0.44  |
      700 |     74.667   |      74.088  |  -0.579  |  -0.78  |
      750 |     78.612   |      79.582  |  +0.970  |  +1.23  |
      800 |     85.431   |      85.263  |  -0.168  |  -0.2   |
--------------------------------------------------------------

* 4 CPUs

Number of | without      | with         | diff     | diff    |
processes | Marker [Sec] | Marker [Sec] |   [Sec]  |   [%]   |
--------------------------------------------------------------
       50 |      2.586   |       2.584  |  -0.003  |  -0.1   |
      100 |      5.254   |       5.283  |  +0.030  |  +0.56  |
      150 |      8.012   |       8.074  |  +0.061  |  +0.76  |
      200 |     11.172   |      11.000  |  -0.172  |  -1.54  |
      250 |     13.917   |      14.036  |  +0.119  |  +0.86  |
      300 |     16.905   |      16.543  |  -0.362  |  -2.14  |
      350 |     19.901   |      20.036  |  +0.135  |  +0.68  |
      400 |     22.908   |      23.094  |  +0.186  |  +0.81  |
      450 |     26.273   |      26.101  |  -0.172  |  -0.66  |
      500 |     29.554   |      29.092  |  -0.461  |  -1.56  |
      550 |     32.377   |      32.274  |  -0.103  |  -0.32  |
      600 |     35.855   |      35.322  |  -0.533  |  -1.49  |
      650 |     39.192   |      38.388  |  -0.804  |  -2.05  |
      700 |     41.744   |      41.719  |  -0.025  |  -0.06  |
      750 |     45.016   |      44.496  |  -0.520  |  -1.16  |
      800 |     48.212   |      47.603  |  -0.609  |  -1.26  |
--------------------------------------------------------------

* 8 CPUs

Number of | without      | with         | diff     | diff    |
processes | Marker [Sec] | Marker [Sec] |   [Sec]  |   [%]   |
--------------------------------------------------------------
       50 |      2.094   |       2.072  |  -0.022  |  -1.07  |
      100 |      4.162   |       4.273  |  +0.111  |  +2.66  |
      150 |      6.485   |       6.540  |  +0.055  |  +0.84  |
      200 |      8.556   |       8.478  |  -0.078  |  -0.91  |
      250 |     10.458   |      10.258  |  -0.200  |  -1.91  |
      300 |     12.425   |      12.750  |  +0.325  |  +2.62  |
      350 |     14.807   |      14.839  |  +0.032  |  +0.22  |
      400 |     16.801   |      16.959  |  +0.158  |  +0.94  |
      450 |     19.478   |      19.009  |  -0.470  |  -2.41  |
      500 |     21.296   |      21.504  |  +0.208  |  +0.98  |
      550 |     23.842   |      23.979  |  +0.137  |  +0.57  |
      600 |     26.309   |      26.111  |  -0.198  |  -0.75  |
      650 |     28.705   |      28.446  |  -0.259  |  -0.9   |
      700 |     31.233   |      31.394  |  +0.161  |  +0.52  |
      750 |     34.064   |      33.720  |  -0.344  |  -1.01  |
      800 |     36.320   |      36.114  |  -0.206  |  -0.57  |
--------------------------------------------------------------
Signed-off-by: NMathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Acked-by: NMasami Hiramatsu <mhiramat@redhat.com>
Acked-by: N'Peter Zijlstra' <peterz@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      97e1c18e
  45. 26 7月, 2008 1 次提交
    • A
      build kernel/profile.o only when requested · b03f6489
      由 Adrian Bunk 提交于 
      Build kernel/profile.o only if CONFIG_PROFILING is enabled.

This makes CONFIG_PROFILING=n kernels smaller.

As a bonus, some profile_tick() calls and one branch from schedule() are
now eliminated with CONFIG_PROFILING=n (but I doubt these are
measurable effects).

This patch changes the effects of CONFIG_PROFILING=n, but I don't think
having more than two choices would be the better choice.

This patch also adds the name of the first parameter to the prototypes
of profile_{hits,tick}() since I anyway had to add them for the dummy
functions.
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      b03f6489
  47. 18 7月, 2008 1 次提交
  49. 17 7月, 2008 1 次提交
  51. 11 7月, 2008 1 次提交
  53. 30 6月, 2008 1 次提交
  55. 26 6月, 2008 1 次提交
    • J
      Add generic helpers for arch IPI function calls · 3d442233
      由 Jens Axboe 提交于 
      This adds kernel/smp.c which contains helpers for IPI function calls. In
addition to supporting the existing smp_call_function() in a more efficient
manner, it also adds a more scalable variant called smp_call_function_single()
for calling a given function on a single CPU only.

The core of this is based on the x86-64 patch from Nick Piggin, lots of
changes since then. "Alan D. Brunelle" <Alan.Brunelle@hp.com> has
contributed lots of fixes and suggestions as well. Also thanks to
Paul E. McKenney <paulmck@linux.vnet.ibm.com> for reviewing RCU usage
and getting rid of the data allocation fallback deadlock.
Acked-by: NIngo Molnar <mingo@elte.hu>
Reviewed-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
      3d442233
  57. 06 6月, 2008 2 次提交
  59. 24 5月, 2008 4 次提交
  61. 06 5月, 2008 1 次提交
    • P
      sched: add optional support for CONFIG_HAVE_UNSTABLE_SCHED_CLOCK · 3e51f33f
      由 Peter Zijlstra 提交于 
      this replaces the rq->clock stuff (and possibly cpu_clock()).

 - architectures that have an 'imperfect' hardware clock can set
   CONFIG_HAVE_UNSTABLE_SCHED_CLOCK

 - the 'jiffie' window might be superfulous when we update tick_gtod
   before the __update_sched_clock() call in sched_clock_tick()

 - cpu_clock() might be implemented as:

     sched_clock_cpu(smp_processor_id())

   if the accuracy proves good enough - how far can TSC drift in a
   single jiffie when considering the filtering and idle hooks?

[ mingo@elte.hu: various fixes and cleanups ]
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      3e51f33f