- 11 11月, 2014 9 次提交
-
-
由 Daniel Thompson 提交于
Currently if an active CPU fails to respond to a roundup request the CPU that requested the roundup will become stuck. This needlessly reduces the robustness of the debugger. This patch introduces a timeout allowing the system state to be examined even when the system contains unresponsive processors. It also modifies kdb's cpu command to make it censor attempts to switch to unresponsive processors and to report their state as (D)ead. Signed-off-by: NDaniel Thompson <daniel.thompson@linaro.org> Cc: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NJason Wessel <jason.wessel@windriver.com>
-
由 Daniel Thompson 提交于
Currently kiosk mode must be explicitly requested by the bootloader or userspace. It is convenient to be able to change the default value in a similar manner to CONFIG_MAGIC_SYSRQ_DEFAULT_MASK. Signed-off-by: NDaniel Thompson <daniel.thompson@linaro.org> Cc: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: NJason Wessel <jason.wessel@windriver.com>
-
由 Anton Vorontsov 提交于
Currently all kdb commands are enabled whenever kdb is deployed. This makes it difficult to deploy kdb to help debug certain types of systems. Android phones provide one example; the FIQ debugger found on some Android devices has a deliberately weak set of commands to allow the debugger to enabled very late in the production cycle. Certain kiosk environments offer another interesting case where an engineer might wish to probe the system state using passive inspection commands without providing sufficient power for a passer by to root it. Without any restrictions, obtaining the root rights via KDB is a matter of a few commands, and works everywhere. For example, log in as a normal user: cbou:~$ id uid=1001(cbou) gid=1001(cbou) groups=1001(cbou) Now enter KDB (for example via sysrq): Entering kdb (current=0xffff8800065bc740, pid 920) due to Keyboard Entry kdb> ps 23 sleeping system daemon (state M) processes suppressed, use 'ps A' to see all. Task Addr Pid Parent [*] cpu State Thread Command 0xffff8800065bc740 920 919 1 0 R 0xffff8800065bca20 *bash 0xffff880007078000 1 0 0 0 S 0xffff8800070782e0 init [...snip...] 0xffff8800065be3c0 918 1 0 0 S 0xffff8800065be6a0 getty 0xffff8800065b9c80 919 1 0 0 S 0xffff8800065b9f60 login 0xffff8800065bc740 920 919 1 0 R 0xffff8800065bca20 *bash All we need is the offset of cred pointers. We can look up the offset in the distro's kernel source, but it is unnecessary. We can just start dumping init's task_struct, until we see the process name: kdb> md 0xffff880007078000 0xffff880007078000 0000000000000001 ffff88000703c000 ................ 0xffff880007078010 0040210000000002 0000000000000000 .....!@......... [...snip...] 0xffff8800070782b0 ffff8800073e0580 ffff8800073e0580 ..>.......>..... 0xffff8800070782c0 0000000074696e69 0000000000000000 init............ ^ Here, 'init'. Creds are just above it, so the offset is 0x02b0. Now we set up init's creds for our non-privileged shell: kdb> mm 0xffff8800065bc740+0x02b0 0xffff8800073e0580 0xffff8800065bc9f0 = 0xffff8800073e0580 kdb> mm 0xffff8800065bc740+0x02b8 0xffff8800073e0580 0xffff8800065bc9f8 = 0xffff8800073e0580 And thus gaining the root: kdb> go cbou:~$ id uid=0(root) gid=0(root) groups=0(root) cbou:~$ bash root:~# p.s. No distro enables kdb by default (although, with a nice KDB-over-KMS feature availability, I would expect at least some would enable it), so it's not actually some kind of a major issue. Signed-off-by: NAnton Vorontsov <anton.vorontsov@linaro.org> Signed-off-by: NJohn Stultz <john.stultz@linaro.org> Signed-off-by: NDaniel Thompson <daniel.thompson@linaro.org> Cc: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: NJason Wessel <jason.wessel@windriver.com>
-
由 Daniel Thompson 提交于
This patch introduces several new flags to collect kdb commands into groups (later allowing them to be optionally disabled). This follows similar prior art to enable/disable magic sysrq commands. The commands have been categorized as follows: Always on: go (w/o args), env, set, help, ?, cpu (w/o args), sr, dmesg, disable_nmi, defcmd, summary, grephelp Mem read: md, mdr, mdp, mds, ef, bt (with args), per_cpu Mem write: mm Reg read: rd Reg write: go (with args), rm Inspect: bt (w/o args), btp, bta, btc, btt, ps, pid, lsmod Flow ctrl: bp, bl, bph, bc, be, bd, ss Signal: kill Reboot: reboot All: cpu, kgdb, (and all of the above), nmi_console Signed-off-by: NDaniel Thompson <daniel.thompson@linaro.org> Cc: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: NJason Wessel <jason.wessel@windriver.com>
-
由 Anton Vorontsov 提交于
Since we now treat KDB_REPEAT_* as flags, there is no need to pass KDB_REPEAT_NONE. It's just the default behaviour when no flags are specified. Signed-off-by: NAnton Vorontsov <anton.vorontsov@linaro.org> Signed-off-by: NJohn Stultz <john.stultz@linaro.org> Signed-off-by: NDaniel Thompson <daniel.thompson@linaro.org> Cc: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: NJason Wessel <jason.wessel@windriver.com>
-
由 Anton Vorontsov 提交于
The actual values of KDB_REPEAT_* enum values and overall logic stayed the same, but we now treat the values as flags. This makes it possible to add other flags and combine them, plus makes the code a lot simpler and shorter. But functionality-wise, there should be no changes. Signed-off-by: NAnton Vorontsov <anton.vorontsov@linaro.org> Signed-off-by: NJohn Stultz <john.stultz@linaro.org> Signed-off-by: NDaniel Thompson <daniel.thompson@linaro.org> Cc: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: NJason Wessel <jason.wessel@windriver.com>
-
由 Anton Vorontsov 提交于
We're about to add more options for commands behaviour, so let's give a more generic name to the low-level kdb command registration function. There are just various renames, no functional changes. Signed-off-by: NAnton Vorontsov <anton.vorontsov@linaro.org> Signed-off-by: NJohn Stultz <john.stultz@linaro.org> Signed-off-by: NDaniel Thompson <daniel.thompson@linaro.org> Cc: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: NJason Wessel <jason.wessel@windriver.com>
-
由 Anton Vorontsov 提交于
We're about to add more options for command behaviour, so let's expand the meaning of kdb_repeat_t. So far we just do various renames, there should be no functional changes. Signed-off-by: NAnton Vorontsov <anton.vorontsov@linaro.org> Signed-off-by: NJohn Stultz <john.stultz@linaro.org> Signed-off-by: NDaniel Thompson <daniel.thompson@linaro.org> Cc: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: NJason Wessel <jason.wessel@windriver.com>
-
由 Anton Vorontsov 提交于
The struct member is never used in the code, so we can remove it. We will introduce real flags soon by renaming cmd_repeat to cmd_flags. Signed-off-by: NAnton Vorontsov <anton.vorontsov@linaro.org> Signed-off-by: NJohn Stultz <john.stultz@linaro.org> Signed-off-by: NDaniel Thompson <daniel.thompson@linaro.org> Cc: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: NJason Wessel <jason.wessel@windriver.com>
-
- 10 11月, 2014 9 次提交
-
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux由 Linus Torvalds 提交于
Pull arm64 fixes from Catalin Marinas: - enable bpf syscall for compat - cpu_suspend fix when checking the idle state type - defconfig update * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: defconfig: update defconfig for 3.18 arm64: compat: Enable bpf syscall arm64: psci: fix cpu_suspend to check idle state type for index
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull ARM SoC fixes from Olof Johansson: "Another quiet week: - a fix to silence edma probe error on non-supported platforms from Arnd - a fix to enable the PL clock for Parallella, to make mainline usable with the SDK. - a somewhat verbose fix for the PLL clock tree on VF610 - enabling of SD/MMC on one of the VF610-based boards (for testing) - a fix for i.MX where CONFIG_SPI used to be implicitly enabled and now needs to be added to the defconfig instead - another maintainer added for bcm2835: Lee Jones" * tag 'armsoc-for-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: dts: zynq: Enable PL clocks for Parallella dma: edma: move device registration to platform code ARM: dts: vf610: add SD node to cosmic dts MAINTAINERS: update bcm2835 entry ARM: imx: Fix the removal of CONFIG_SPI option ARM: imx: clk-vf610: define PLL's clock tree
-
git://git.kernel.org/pub/scm/linux/kernel/git/glikely/linux由 Linus Torvalds 提交于
Pull devicetree bugfix from Grant Likely: "One buffer overflow bug that shouldn't be left around" * 'devicetree/merge' of git://git.kernel.org/pub/scm/linux/kernel/git/glikely/linux: of: Fix overflow bug in string property parsing functions
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs由 Linus Torvalds 提交于
Pull btrfs fix from Chris Mason: "It's a one liner for an error cleanup path that leads to crashes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: fix kfree on list_head in btrfs_lookup_csums_range error cleanup
-
由 Linus Torvalds 提交于
Merge tag 'driver-core-3.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fixes from Greg KH: "Here are 3 tiny fixes for 3.18-rc4. One fixes up a long-stading race condition in the driver core for removing directories in /sys/devices/virtual/ and the other 2 fix up the wording of a new Kconfig option that was added in 3.18-rc1" * tag 'driver-core-3.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: tiny: rename ENABLE_DEV_COREDUMP to ALLOW_DEV_COREDUMP tiny: reverse logic for DISABLE_DEV_COREDUMP sysfs: driver core: Fix glue dir race condition by gdp_mutex
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging由 Linus Torvalds 提交于
Pull staging driver fixes from Greg KH: "Here are some staging/iio fixes for 3.18-rc4. Nothing major, just a few bugfixes of things that have been reported" * tag 'staging-3.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging:iio:ade7758: Remove "raw" from channel name staging:iio:ade7758: Fix check if channels are enabled in prenable staging:iio:ade7758: Fix NULL pointer deref when enabling buffer iio: as3935: allocate correct iio_device size io: accel: kxcjk-1013: Fix iio_event_spec direction iio: tsl4531: Fix compiler error when CONFIG_PM_OPS is not defined iio: adc: mxs-lradc: Disable the clock on probe failure iio: st_sensors: Fix buffer copy staging:iio:ad5933: Drop "raw" from channel names staging:iio:ad5933: Fix NULL pointer deref when enabling buffer
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty由 Linus Torvalds 提交于
Pull tty/serial fixes from Greg KH: "Here are some tiny serial/tty fixes for 3.18-rc4 that resolve some reported issues" * tag 'tty-3.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: Fix pty master poll() after slave closes v2 serial: of-serial: fix uninitialized kmalloc variable tty/vt: don't set font mappings on vc not supporting this tty: serial: 8250_mtk: Fix quot calculation tty: Prevent "read/write wait queue active!" log flooding tty: Fix high cpu load if tty is unreleaseable serial: Fix divide-by-zero fault in uart_get_divisor()
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb由 Linus Torvalds 提交于
Pull USB fixes from Greg KH: "Here are some USB fixes for 3.18-rc4. Just a bunch of little fixes resolving reported issues and new device ids for existing drivers. Full details are in the shortlog" * tag 'usb-3.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (26 commits) USB: Update default usb-storage delay_use value in kernel-parameters.txt USB: cdc-acm: add quirk for control-line state requests phy: omap-usb2: Enable runtime PM of omap-usb2 phy properly USB: storage: Fix timeout in usb_stor_euscsi_init() and usb_stor_huawei_e220_init() USB: cdc-acm: only raise DTR on transitions from B0 Revert "storage: Replace magic number with define in usb_stor_euscsi_init()" usb: core: notify disconnection when core detects disconnect usb: core: need to call usb_phy_notify_connect after device setup uas: Add US_FL_NO_ATA_1X quirk for 2 more Seagate models xhci: no switching back on non-ULT Haswell USB: quirks: enable device-qualifier quirk for yet another Elan touchscreen USB: quirks: enable device-qualifier quirk for another Elan touchscreen MAINTAINERS: Remove duplicate entry for usbip driver usb: storage: fix build warnings !CONFIG_PM usb: Remove references to non-existent PLAT_S5P symbol uas: Add NO_ATA_1X for VIA VL711 devices xhci: Disable streams on Asmedia 1042 xhci controllers USB: HWA: fix a warning message uas: Add US_FL_NO_ATA_1X quirk for 1 more Seagate model usb-storage: handle a skipped data phase ...
-
- 09 11月, 2014 4 次提交
-
-
由 Andreas Färber 提交于
The Parallella board comes with a U-Boot bootloader that loads one of two predefined FPGA bitstreams before booting the kernel. Both define an AXI interface to the on-board Epiphany processor. Enable clocks FCLK0..FCLK3 for the Programmable Logic by default. Otherwise accessing, e.g., the ESYSRESET register freezes the board, as seen with the Epiphany SDK tools e-reset and e-hw-rev, using /dev/mem. Cc: <stable@vger.kernel.org> # 3.17.x Signed-off-by: NAndreas Färber <afaerber@suse.de> Acked-by: NMichal Simek <michal.simek@xilinx.com> Signed-off-by: NOlof Johansson <olof@lixom.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux由 Linus Torvalds 提交于
Pull i2c bugfixes from Wolfram Sang: "One bigger cleanup (FSF address removal) and two bugfixes for I2C" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: core: Dispose OF IRQ mapping at client removal time i2c: at91: don't account as iowait i2c: remove FSF address
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull irq fixes from Thomas Gleixner: "Two fixlets for the armada SoC interrupt controller" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip: armada-370-xp: Fix MPIC interrupt handling irqchip: armada-370-xp: Fix MSI interrupt handling
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media由 Linus Torvalds 提交于
Pull media fixes from Mauro Carvalho Chehab: "For: - some regression fixes at the Remote Controller core and imon driver - a build fix for certain randconfigs with ir-hix5hd2 - don't feed power to satellite system at ds3000 driver init It also contains some fixes for drivers added for Kernel 3.18: - some fixes at the new ISDB-S driver, and the corresponding bits to fix some descriptors for this Japanese TV standard at the DVB core - two warning cleanups for sp2 driver if PM is disabled - change the default mode for the new vivid driver" * git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] sp2: sp2_init() can be static [media] dvb:tc90522: fix always-false expression [media] dvb-core: set default properties of ISDB-S [media] dvb:tc90522: fix stats report [media] vivid: default to single planar device instances [media] imon: fix other RC type protocol support [media] ir-hix5hd2 fix build warning [media] ds3000: fix LNB supply voltage on Tevii S480 on initialization [media] rc5-decoder: BZ#85721: Fix RC5-SZ decoding [media] rc-core: fix protocol_change regression in ir_raw_event_register
-
- 08 11月, 2014 11 次提交
-
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linus由 Linus Torvalds 提交于
Pull MIPS updates from Ralf Baechle: "This weeks' round of MIPS bug fixes for 3.18: - wire up the bpf syscall - fix TLB dump output for R3000 class TLBs - fix strnlen_user return value if no NUL character was found. - fix build with binutils 2.24.51+. While there is no binutils 2.25 release yet, toolchains derived from binutils 2.24.51+ are already in common use. - the Octeon GPIO code forgot to offline GPIO IRQs. - fix build error for XLP. - fix possible BUG assertion with EVA for CMA" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: Fix build with binutils 2.24.51+ MIPS: R3000: Fix debug output for Virtual page number MIPS: Fix strnlen_user() return value in case of overlong strings. MIPS: CMA: Do not reserve memory if not required MIPS: Wire up bpf syscall. MIPS/Xlp: Remove the dead function destroy_irq() to fix build error MIPS: Octeon: Make Octeon GPIO IRQ chip CPU hotplug-aware
-
git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs由 Linus Torvalds 提交于
Pull xfs fixes from Dave Chinner: "This update fixes a warning in the new pagecache_isize_extended() and updates some related comments, another fix for zero-range misbehaviour, and an unforntuately large set of fixes for regressions in the bulkstat code. The bulkstat fixes are large but necessary. I wouldn't normally push such a rework for a -rcX update, but right now xfsdump can silently create incomplete dumps on 3.17 and it's possible that even xfsrestore won't notice that the dumps were incomplete. Hence we need to get this update into 3.17-stable kernels ASAP. In more detail, the refactoring work I committed in 3.17 has exposed a major hole in our QA coverage. With both xfsdump (the major user of bulkstat) and xfsrestore silently ignoring missing files in the dump/restore process, incomplete dumps were going unnoticed if they were being triggered. Many of the dump/restore filesets were so small that they didn't evenhave a chance of triggering the loop iteration bugs we introduced in 3.17, so we didn't exercise the code sufficiently, either. We have already taken steps to improve QA coverage in xfstests to avoid this happening again, and I've done a lot of manual verification of dump/restore on very large data sets (tens of millions of inodes) of the past week to verify this patch set results in bulkstat behaving the same way as it does on 3.16. Unfortunately, the fixes are not exactly simple - in tracking down the problem historic API warts were discovered (e.g xfsdump has been working around a 20 year old bug in the bulkstat API for the past 10 years) and so that complicated the process of diagnosing and fixing the problems. i.e. we had to fix bugs in the code as well as discover and re-introduce the userspace visible API bugs that we unwittingly "fixed" in 3.17 that xfsdump relied on to work correctly. Summary: - incorrect warnings about i_mutex locking in pagecache_isize_extended() and updates comments to match expected locking - another zero-range bug fix for stray file size updates - a bunch of fixes for regression in the bulkstat code introduced in 3.17" * tag 'xfs-for-linus-3.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: xfs: track bulkstat progress by agino xfs: bulkstat error handling is broken xfs: bulkstat main loop logic is a mess xfs: bulkstat chunk-formatter has issues xfs: bulkstat chunk formatting cursor is broken xfs: bulkstat btree walk doesn't terminate mm: Fix comment before truncate_setsize() xfs: rework zero range to prevent invalid i_size updates mm: Remove false WARN_ON from pagecache_isize_extended() xfs: Check error during inode btree iteration in xfs_bulkstat() xfs: bulkstat doesn't release AGI buffer on error
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator由 Linus Torvalds 提交于
Pull regulator fixes from Mark Brown: "More changes than I'd like here, most of them for a single bug repeated in a bunch of drivers with data not being initialized correctly, plus a fix to lower the severity of a warning introduced in the last merge window which can legitimately go off so we don't want to alarm users excessively" * tag 'regulator-v3.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: s2mpa01: zero-initialize regulator match table array regulator: max8660: zero-initialize regulator match table array regulator: max77802: zero-initialize regulator match table regulator: max77686: zero-initialize regulator match table regulator: max1586: zero-initialize regulator match table array regulator: max77693: Fix use of uninitialized regulator config regulator: of: Lower the severity of the error with no container
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi由 Linus Torvalds 提交于
Pull spi bugfixes from Mark Brown: "A couple of small driver fixes for v3.18, both quite problematic if you hit a use case that's affected" * tag 'spi-v3.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: pxa2xx: toggle clocks on suspend if not disabled by runtime PM spi: fsl-dspi: Fix CTAR selection
-
由 Johannes Berg 提交于
The ENABLE_DEV_COREDUMP option is misleading as it implies that it gets the framework enabled, this isn't true it just allows it to get enabled if a driver needs it. Rename it to ALLOW_DEV_COREDUMP to better capture its semantics. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Reviewed-by: NJosh Triplett <josh@joshtriplett.org> Acked-by: NAristeu Rozanski <aris@redhat.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Aristeu Rozanski 提交于
It's desirable for allnconfig and tinyconfig targets to result in the least amount of code possible. DISABLE_DEV_COREDUMP exists as a way to switch off DEV_COREDUMP regardless if any drivers select WANT_DEV_COREDUMP. This patch renames the option to ENABLE_DEV_COREDUMP and setting it to 'n' (as in allnconfig or tinyconfig) will effectively disable device coredump. Cc: Josh Triplett <josh@joshtriplett.org> Reviewed-by: NJosh Triplett <josh@joshtriplett.org> Signed-off-by: NAristeu Rozanski <arozansk@redhat.com> Reviewed-by: NJohannes Berg <johannes@sipsolutions.net> Acked-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Laurent Pinchart 提交于
Clients instantiated from OF get an IRQ mapping created at device registration time. Dispose the mapping when the client is removed. Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: NWolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org
-
由 Wolfram Sang 提交于
iowait is for blkio [1]. I2C shouldn't use it. [1] https://lkml.org/lkml/2014/11/3/317Signed-off-by: NWolfram Sang <wsa@the-dreams.de> Acked-by: NLudovic Desroches <ludovic.desroches@atmel.com> Cc: stable@kernel.org
-
由 Wolfram Sang 提交于
We have a central copy of the GPL for that. Some addresses were already outdated. Signed-off-by: NWolfram Sang <wsa+renesas@sang-engineering.com>
-
由 Mark Knibbs 提交于
Back in 2010 the default usb-storage delay_use time was reduced from 5 to 1 second (commit a4a47bc0), but kernel-parameters.txt wasn't updated to reflect that. Signed-off-by: NMark Knibbs <markk@clara.co.uk> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Yijing Wang 提交于
There is a race condition when removing glue directory. It can be reproduced in following test: path 1: Add first child device device_add() get_device_parent() /*find parent from glue_dirs.list*/ list_for_each_entry(k, &dev->class->p->glue_dirs.list, entry) if (k->parent == parent_kobj) { kobj = kobject_get(k); break; } .... class_dir_create_and_add() path2: Remove last child device under glue dir device_del() cleanup_device_parent() cleanup_glue_dir() kobject_put(glue_dir); If path2 has been called cleanup_glue_dir(), but not call kobject_put(glue_dir), the glue dir is still in parent's kset list. Meanwhile, path1 find the glue dir from the glue_dirs.list. Path2 may release glue dir before path1 call kobject_get(). So kernel will report the warning and bug_on. This is a "classic" problem we have of a kref in a list that can be found while the last instance could be removed at the same time. This patch reuse gdp_mutex to fix this race condition. The following calltrace is captured in kernel 3.4, but the latest kernel still has this bug. ----------------------------------------------------- <4>[ 3965.441471] WARNING: at ...include/linux/kref.h:41 kobject_get+0x33/0x40() <4>[ 3965.441474] Hardware name: Romley <4>[ 3965.441475] Modules linked in: isd_iop(O) isd_xda(O)... ... <4>[ 3965.441605] Call Trace: <4>[ 3965.441611] [<ffffffff8103717a>] warn_slowpath_common+0x7a/0xb0 <4>[ 3965.441615] [<ffffffff810371c5>] warn_slowpath_null+0x15/0x20 <4>[ 3965.441618] [<ffffffff81215963>] kobject_get+0x33/0x40 <4>[ 3965.441624] [<ffffffff812d1e45>] get_device_parent.isra.11+0x135/0x1f0 <4>[ 3965.441627] [<ffffffff812d22d4>] device_add+0xd4/0x6d0 <4>[ 3965.441631] [<ffffffff812d0dbc>] ? dev_set_name+0x3c/0x40 .... <2>[ 3965.441912] kernel BUG at ..../fs/sysfs/group.c:65! <4>[ 3965.441915] invalid opcode: 0000 [#1] SMP ... <4>[ 3965.686743] [<ffffffff811a677e>] sysfs_create_group+0xe/0x10 <4>[ 3965.686748] [<ffffffff810cfb04>] blk_trace_init_sysfs+0x14/0x20 <4>[ 3965.686753] [<ffffffff811fcabb>] blk_register_queue+0x3b/0x120 <4>[ 3965.686756] [<ffffffff812030bc>] add_disk+0x1cc/0x490 .... ------------------------------------------------------- Signed-off-by: NYijing Wang <wangyijing@huawei.com> Signed-off-by: NWeng Meiling <wengmeiling.weng@huawei.com> Cc: <stable@vger.kernel.org> #3.4+ Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 07 11月, 2014 7 次提交
-
-
由 Manuel Lauss 提交于
Starting with version 2.24.51.20140728 MIPS binutils complain loudly about mixing soft-float and hard-float object files, leading to this build failure since GCC is invoked with "-msoft-float" on MIPS: {standard input}: Warning: .gnu_attribute 4,3 requires `softfloat' LD arch/mips/alchemy/common/built-in.o mipsel-softfloat-linux-gnu-ld: Warning: arch/mips/alchemy/common/built-in.o uses -msoft-float (set by arch/mips/alchemy/common/prom.o), arch/mips/alchemy/common/sleeper.o uses -mhard-float To fix this, we detect if GAS is new enough to support "-msoft-float" command option, and if it does, we can let GCC pass it to GAS; but then we also need to sprinkle the files which make use of floating point registers with the necessary ".set hardfloat" directives. Signed-off-by: NManuel Lauss <manuel.lauss@gmail.com> Cc: Linux-MIPS <linux-mips@linux-mips.org> Cc: Matthew Fortune <Matthew.Fortune@imgtec.com> Cc: Markos Chandras <Markos.Chandras@imgtec.com> Cc: Maciej W. Rozycki <macro@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/8355/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Dave Chinner 提交于
The bulkstat main loop progress is tracked by the "lastino" variable, which is a full 64 bit inode. However, the loop actually works on agno/agino pairs, and so there's a significant disconnect between the rest of the loop and the main cursor. Convert this to use the agino, and pass the agino into the chunk formatting function and convert it too. This gets rid of the inconsistency in the loop processing, and finally makes it simple for us to skip inodes at any point in the loop simply by incrementing the agino cursor. cc: <stable@vger.kernel.org> # 3.17 Signed-off-by: NDave Chinner <dchinner@redhat.com> Reviewed-by: NBrian Foster <bfoster@redhat.com> Signed-off-by: NDave Chinner <david@fromorbit.com>
-
由 Dave Chinner 提交于
The error propagation is a horror - xfs_bulkstat() returns a rval variable which is only set if there are formatter errors. Any sort of btree walk error or corruption will cause the bulkstat walk to terminate but will not pass an error back to userspace. Worse is the fact that formatter errors will also be ignored if any inodes were correctly formatted into the user buffer. Hence bulkstat can fail badly yet still report success to userspace. This causes significant issues with xfsdump not dumping everything in the filesystem yet reporting success. It's not until a restore fails that there is any indication that the dump was bad and tha bulkstat failed. This patch now triggers xfsdump to fail with bulkstat errors rather than silently missing files in the dump. This now causes bulkstat to fail when the lastino cookie does not fall inside an existing inode chunk. The pre-3.17 code tolerated that error by allowing the code to move to the next inode chunk as the agino target is guaranteed to fall into the next btree record. With the fixes up to this point in the series, xfsdump now passes on the troublesome filesystem image that exposes all these bugs. cc: <stable@vger.kernel.org> Signed-off-by: NDave Chinner <dchinner@redhat.com> Reviewed-by: NBrian Foster <bfoster@redhat.com>
-
由 Dave Chinner 提交于
There are a bunch of variables tha tare more wildy scoped than they need to be, obfuscated user buffer checks and tortured "next inode" tracking. This all needs cleaning up to expose the real issues that need fixing. cc: <stable@vger.kernel.org> # 3.17 Signed-off-by: NDave Chinner <dchinner@redhat.com> Reviewed-by: NBrian Foster <bfoster@redhat.com> Signed-off-by: NDave Chinner <david@fromorbit.com>
-
由 Dave Chinner 提交于
The loop construct has issues: - clustidx is completely unused, so remove it. - the loop tries to be smart by terminating when the "freecount" tells it that all inodes are free. Just drop it as in most cases we have to scan all inodes in the chunk anyway. - move the "user buffer left" condition check to the only point where we consume space int eh user buffer. - move the initialisation of agino out of the loop, leaving just a simple loop control logic using the clusteridx. Also, double handling of the user buffer variables leads to problems tracking the current state - use the cursor variables directly rather than keeping local copies and then having to update the cursor before returning. cc: <stable@vger.kernel.org> # 3.17 Signed-off-by: NDave Chinner <dchinner@redhat.com> Reviewed-by: NBrian Foster <bfoster@redhat.com> Signed-off-by: NDave Chinner <david@fromorbit.com>
-
由 Dave Chinner 提交于
The xfs_bulkstat_agichunk formatting cursor takes buffer values from the main loop and passes them via the structure to the chunk formatter, and the writes the changed values back into the main loop local variables. Unfortunately, this complex dance is full of corner cases that aren't handled correctly. The biggest problem is that it is double handling the information in both the main loop and the chunk formatting function, leading to inconsistent updates and endless loops where progress is not made. To fix this, push the struct xfs_bulkstat_agichunk outwards to be the primary holder of user buffer information. this removes the double handling in the main loop. Also, pass the last inode processed by the chunk formatter as a separate parameter as it purely an output variable and is not related to the user buffer consumption cursor. Finally, the chunk formatting code is not shared by anyone, so make it local to xfs_itable.c. cc: <stable@vger.kernel.org> # 3.17 Signed-off-by: NDave Chinner <dchinner@redhat.com> Reviewed-by: NBrian Foster <bfoster@redhat.com> Signed-off-by: NDave Chinner <david@fromorbit.com>
-
由 Dave Chinner 提交于
The bulkstat code has several different ways of detecting the end of an AG when doing a walk. They are not consistently detected, and the code that checks for the end of AG conditions is not consistently coded. Hence the are conditions where the walk code can get stuck in an endless loop making no progress and not triggering any termination conditions. Convert all the "tmp/i" status return codes from btree operations to a common name (stat) and apply end-of-ag detection to these operations consistently. cc: <stable@vger.kernel.org> # 3.17 Signed-off-by: NDave Chinner <dchinner@redhat.com> Reviewed-by: NBrian Foster <bfoster@redhat.com> Signed-off-by: NDave Chinner <david@fromorbit.com>
-