On x86_64 we have 3 holes in struct tbf_sched_data.

The member peak_present can be replaced with peak.rate_bytes_ps,
because peak.rate_bytes_ps is set only when peak is specified in
tbf_change(). tbf_peak_present() is introduced to test
peak.rate_bytes_ps.

The member max_size is moved to fill 32bit hole.
Signed-off-by: NHiroaki SHIMODA <shimoda.hiroaki@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The commit 9b2777d6 ("ieee802154: add TX power control to
wpan_phy") introduced the new function at86rf212_set_txpower() with
the questionable check of the return of __at86rf230_write() in the
exit path:

1) Both at86rf212_set_txpower() and __at86rf230_write() have the
   same return type.

2) Whatever __at86rf230_write() returns becomes the return value of
   at86rf212_set_txpower().

Thus, fix the exit path by getting rid of that check entirely.
Signed-off-by: NJean Sacren <sakiwit@gmail.com>
Cc: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There were a couple of patches fixing the same bug that
results in duplicated err = 0; assignment.
The patch removes one of them.
Signed-off-by: NAlexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Amir Vadai says:

====================
net/mlx4: Mellanox driver update 27-02-2014

This patchset contains some fixes for small trivial bugs, and
compilation/syntactic parsers warnings

Patchset was applied and tested over commit 750f679c "Merge branch '6lowpan'"

Changes from V1:
-patch 5/9:  Replace mlx4_en_mac_to_u64() with mlx4_mac_to_u64()
  - Remove unnecessary define of ETH_ALEN

Changes from V0:
-patch 3/9:  net/mlx4_en: Pad ethernet packets smaller than 17 bytes
  - Make condition more efficient
  - Didn't use canonical function to pad buffer since using bounce buffer
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The mlx4_en driver support also 1Gbit and 40Gbit Ethernet devices,
changed the driver description in the menuconfig to reflect that.
Signed-off-by: NEyal Perry <eyalpe@mellanox.com>
Signed-off-by: NAmir Vadai <amirv@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When BlueFlame is turned on, control segment of the TX WQE is changed,
and the second line of it is used for QPN.
Changed code to use a union in the mlx4_wqe_ctrl_seg instead of casting.
This makes the code clearer and solves the static checker warning:

drivers/net/ethernet/mellanox/mlx4/en_tx.c:839 mlx4_en_xmit()
	warn: potential memory corrupting cast 4 vs 2 bytes

CC: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NAmir Vadai <amirv@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch force conversion to u32 to fix the following sparse warning:
drivers/net/ethernet/mellanox/mlx4/fw.c:1822:53: warning: restricted __be32
degrades to integer

Casting to u32 is safe here, because token will be returned as is
from the hardware without any modification.
Signed-off-by: NEyal Perry <eyalpe@mellanox.com>
Signed-off-by: NAmir Vadai <amirv@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Connect-X devices selftest speed test shouldn't fail on 1G and 40G link
speeds.
Signed-off-by: NAmir Vadai <amirv@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently, the EN driver uses a private static function
mlx4_en_mac_to_u64(). Move it to a common include file (driver.h)
for mlx4_en and mlx4_ib for further use.
Signed-off-by: NEugenia Emantayev <eugenia@mellanox.com>
Signed-off-by: NAmir Vadai <amirv@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Give accurate counters and avoids cache misses when several rings
update the counters of stop/wake queue.
Signed-off-by: NEugenia Emantayev <eugenia@mellanox.com>
Signed-off-by: NAmir Vadai <amirv@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Hardware can't accept packets smaller than 17 bytes. Therefore need to
pad with zeros.
Signed-off-by: NAmir Vadai <amirv@mellanox.com>
Signed-off-by: NEugenia Emantayev <eugenia@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Verify mlx4_en module parameters.
In case they are out of range - reset to default values.
Signed-off-by: NEugenia Emantayev <eugenia@mellanox.com>
Signed-off-by: NAmir Vadai <amirv@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

User priority limit has to be less than MLX4_EN_NUM_UP.
Signed-off-by: NAmir Vadai <amirv@mellanox.com>
Signed-off-by: NEugenia Emantayev <eugenia@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Alexander Aring says:

====================
6lowpan: fix issues with byte ordering types

I got some mail from a "kbuild test robot" and it detected some byte
ordering issues with the tag and datagram size value of 6LoWPAN IEEE
802.15.4 fragmentation header.

This patch series should fix the issues with the byte ordering.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NAlexander Aring <alex.aring@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The initialization of the tag value doesn't matter at begin of
fragmentation. This patch removes the initialization to zero.
Signed-off-by: NAlexander Aring <alex.aring@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Datagram size value is u16 because we convert it to host byte order
and we need to read it. Only the tag value belongs to __be16 type.
Signed-off-by: NAlexander Aring <alex.aring@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Aaron Brown says:

====================
Mark updates ixgbe for LER / adapter removal.  He restores the HW
address in the recovery path so the device is not perpetually removed,
fixes up some removed state ethtool results and adds checks related to
config space access.

Jacob adds support for the new SIOCGHWTSTAMP ioctl.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds support for the new SIOCGHWTSTAMP ioctl, which enables a
process to determine the current timestamp configuration. In order to
implement this, store a copy of the timestamp configuration. In
addition, we can remove the 'int cmd' parameter as the new set_ts_config
function doesn't use it. I also fixed a typo in the function
description.

-v2
* Only save the settings after validating them
Signed-off-by: NJacob Keller <jacob.e.keller@intel.com>
Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Configuration space reads should also be checked for removal. So
add some checks related to config space accesses.

v2:
* Fixed indent
Signed-off-by: NMark Rustad <mark.d.rustad@intel.com>
Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Some ethtool tests returned apparently good results when the
adapter was in a removed state. Fix that by checking for removal.
This also fixes two paths that could return uninitialized memory
in data[4].
Signed-off-by: NMark Rustad <mark.d.rustad@intel.com>
Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The hw_addr needs to be restored in the pcie recovery path or
else the device will be perpetually removed. Also restore the
value in the resume path.
Signed-off-by: NMark Rustad <mark.d.rustad@intel.com>
Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently we're only sending arp requests if we have a route to the target
(and, thus, can find out the source ip address).

There are some use cases, however, where we don't want/need to set an ip
address (or set up a specific route) for bonding to use arp monitoring *for
traffic generation*. We can easily send arp probes (arp requests with src
ip == 0) to generate arp broadcast responses from the target ip and use
them for determining if the target is up.

This, obviously, won't work with arp validation - because we don't have the
ip address set and, thus, will filter out the responses. So in that case -
print a warning.

CC: François CACHEREUL <f.cachereul@alphalink.fr>
CC: Zhenjie Chen <zhchen@redhat.com>
CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: NVeaceslav Falico <vfalico@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Alexander Aring says:

====================
6lowpan: reimplementation of fragmentation handling

this patch series reimplementation the fragmentation handling of 6lowpan
accroding to rfc4944 [1].

The first big note is, that the current fragmentation behaviour isn't rfc
complaint. The main issue is a wrong datagram_size value which needs to be:
datagram_size = ipv6_payload + ipv6 header + (maybe compressed transport header,
                currently only udp is supported)

but the current datagram_size value is calculated as:
datagram_size = ipv6_payload

Fragmentation work in a linux<->linux communication only.

Why reimplementation?

I reimplemted the reassembly side only. The current behaviour is to allocate a
skb with the reassembled size and hold all fragments in a list, protected by a
spinlock. After we received all fragments (detected by the sum of all fragments,
it begins to place all fragments into the allocated skb).

This reassembly implementation has some race condition. Additional I make it more
rfc complaint. The current implementation match on the tag value inside the frag
header only, but rfc4944 says we need to match on dst addr(mac), src addr(mac),
tag value, datagram_size value. [2]

The new reassembly handling use the inet_frag api (I mean the callback interface
of ipv6 and ipv4 reassembly). I looked into ipv6 and wanted to see how ipv6 is
dealing with reassembly, so I based my code on this implementation.

On the sending side to generate the fragments I improved the current code to use
the nearest 8 divided payload. (We can do that, because the mac layer has a
dynamic size, so it depends on mac_header how big we can do the payload).

Of course I fix also the reassembly/sending side to be rfc complaint now.

Regards
Alexander Aring

[1] http://tools.ietf.org/html/rfc4944
[2] http://tools.ietf.org/html/rfc4944#section-5.3

changes since v2:
 - rework checkpatch code style issue patch.
   Merge two pr_debugs into one pr_debug.

changes since v3:
 - rename 6lowpan.ko to 6lowpan_rtnl.c in commit msg of patch 5/8.

changes since v4:
 - Add a new patch 2/8 to introduce lowpan_uncompress_size function. Also
   improving this function a little bit.
 - Add a new patch 4/8 to change tag value to __be16.
 - use skb_header_reset function on FRAG1 only, which should have the
   lowpan header. See lowpan_get_frag_info function. (slightly improving
   of fragmentation header parsing).
 - changes types of variables to u16 in lowpan_skb_fragmentation.
 - use lowpan_uncompress_size instead of storing necessary information
   in skb control block, this can be destroyed after dev_queue_xmit call.
   Thanks David for this hint.
 - remove Tested-by: Martin Townsend <martin.townsend@xsilon.com>, because
   too many funcionality change.

changes since v5:
 - handle lowpan_addr_mode_size with lookup table.

changes since v6:
 - remove unnecessary parameter in lowpan_frag_queue.
 - fix commit message in patch 8/8 which included a describtion of adding the
   lownpan_uncompress_size function. This was splitted in a seperate patch.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch drops the current way of 6lowpan fragmentation on receiving
side and replace it with a implementation which use the inet_frag api.
The old fragmentation handling has some race conditions and isn't
rfc4944 compatible. Also adding support to match fragments on
destination address, source address, tag value and datagram_size
which is missing in the current implementation.
Signed-off-by: NAlexander Aring <alex.aring@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds necessary ieee802154 6lowpan namespace to provide the
inet_frag information. This is a initial support for handling 6lowpan
fragmentation with the inet_frag api.
Signed-off-by: NAlexander Aring <alex.aring@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Detected with:

./scripts/checkpatch.pl --strict -f net/ieee802154/6lowpan_rtnl.c
Signed-off-by: NAlexander Aring <alex.aring@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We have a 6lowpan.c file and 6lowpan.ko file. To avoid confusing we
should move 6lowpan.c to 6lowpan_rtnl.c. Then we can support multiple
source files for 6lowpan module.
Signed-off-by: NAlexander Aring <alex.aring@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NAlexander Aring <alex.aring@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch fix the fragmentation on sending side according to rfc4944.

Also add improvement to use the full payload of a PDU which calculate
the nearest divided to 8 payload length for the fragmentation datagram
size attribute.

The main issue is that the datagram size of fragmentation header use the
ipv6 payload length, but rfc4944 says it's the ipv6 payload length inclusive
network header size (and transport header size if compressed).
Signed-off-by: NAlexander Aring <alex.aring@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch add a lookup function for uncompressed 6LoWPAN header
size. This is needed to estimate the real size after uncompress the
6LoWPAN header.
Signed-off-by: NAlexander Aring <alex.aring@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds a 6lowpan fragmentation struct into cb of skb which
is necessary to hold fragmentation information.
Signed-off-by: NAlexander Aring <alex.aring@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use devm_ioremap_resource() in order to make the code simpler.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use devm_ioremap_resource() in order to make the code simpler.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit 57f89bfa ("network: Allow af_packet to transmit +4 bytes
for VLAN packets.") added the possibility for non-mmaped frames to
send extra 4 byte for VLAN header so the MTU increases from 1500 to
1504 byte, for example.

Commit cbd89acb ("af_packet: fix for sending VLAN frames via
packet_mmap") attempted to fix that for the mmap part but was
reverted as it caused regressions while using eth_type_trans()
on output path.

Lets just act analogous to 57f89bfa and add a similar logic
to TX_RING. We presume size_max as overcharged with +4 bytes and
later on after skb has been built by tpacket_fill_skb() check
for ETH_P_8021Q header on packets larger than normal MTU. Can
be easily reproduced with a slightly modified trafgen in mmap(2)
mode, test cases:

 { fill(0xff, 12) const16(0x8100) fill(0xff, <1504|1505>) }
 { fill(0xff, 12) const16(0x0806) fill(0xff, <1500|1501>) }

Note that we need to do the test right after tpacket_fill_skb()
as sockets can have PACKET_LOSS set where we would not fail but
instead just continue to traverse the ring.
Reported-by: NMathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de>
Signed-off-by: NDaniel Borkmann <dborkman@redhat.com>
Cc: Ben Greear <greearb@candelatech.com>
Cc: Phil Sutter <phil@nwl.cc>
Tested-by: NMathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Aaron Brown says:

====================
This series contains updates to ixgbe and ixgbevf.

Don provides an update to change a hard coded timeout interval to
a system-wide timeout one, collects AUTOC register functions into
one place and fixes some firmware bit handling.

Emil resolves a tx handling error introduced in a recent commit and
adds check for CHECKSUM_PARTIAL to avoid an skb_is_gso check
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds check for CHECKSUM_PARTIAL to avoid the skb_is_gso check
in ixgbevf_tso(). It should reduce overhead for workloads that are not using
TSO or checksum offloads. It is the same as in ixgbe.
Signed-off-by: NEmil Tantilov <emil.s.tantilov@intel.com>
Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com>
Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch resolves an issue introduced by:
commit 7ad1a093
ixgbevf: make the first tx_buffer a repository for most of the skb info

Incorrect check for the result of ixgbevf_tso() can lead to calling
ixgbevf_tx_csum() which can spawn 2 context descriptors and result in
performance degradation and/or corrupted packets.
Signed-off-by: NEmil Tantilov <emil.s.tantilov@intel.com>
Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The driver will now honor the MNG FW veto bit in blocking link resets.
This patch will affect x520 and x540 systems.
Signed-off-by: NDon Skidmore <donald.c.skidmore@intel.com>
Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The current code doesn't toggle the correct bit to reset the data pipeline
on Restart_AN assertion.  This patch corrects that.
Signed-off-by: NDon Skidmore <donald.c.skidmore@intel.com>
Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>