Such a feature doesn't exist and isn't really needed since you
probably won't have enough interfaces to make it worthwhile, so
just remove that from the documentation.

Reported-by: booto [on IRC]
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

The userspace may want to delay the the first scheduled scan or
net-detect cycle.  Add an optional attribute to the scheduled scan
configuration to pass the delay to be (optionally) used by the driver.
Signed-off-by: NLuciano Coelho <luciano.coelho@intel.com>
[add the attribute to the policy to validate it]
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Added new NL80211_ATTR_NETNS_FD which allows to
set namespace via nl80211 by fd.
Signed-off-by: NVadim Kochan <vadim4j@gmail.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

For some reason, we made the bandwidth separate flags, which
is rather confusing - a single rate cannot have different
bandwidths at the same time.

Change this to no longer be flags but use a separate field
for the bandwidth ('bw') instead.

While at it, add support for 5 and 10 MHz rates - these are
reported as regular legacy rates with their real bitrate,
but tagged as 5/10 now to make it easier to distinguish them.

In the nl80211 API, the flags are preserved, but the code
now can also clearly only set a single one of the flags.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

These rates are treated the same as 160 MHz in the spec, so
it makes no sense to distinguish them. As no driver uses them
yet, this is also not a problem, just remove them.

In the userspace API the field remains reserved to preserve
API and ABI.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Send the netdetect configuration information in the response to
NL8021_CMD_GET_WOWLAN commands.  This includes the scan interval,
SSIDs to match and frequencies to scan.

Additionally, add the NL80211_WOWLAN_TRIG_NET_DETECT with
NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED.
Signed-off-by: NLuciano Coelho <luciano.coelho@intel.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

The base for the current statistics is pretty mixed up, support
exporting RX/TX statistics for MSDUs per TID. This (currently)
covers received MSDUs, transmitted MSDUs and retries/failures
thereof.

Doing it per TID for MSDUs makes more sense than say only per AC
because it's symmetric - we could export per-AC statistics for all
frames (which AC we used for transmission can be determined also
for management frames) but per TID is better and usually data
frames are really the ones we care about. Also, on RX we can't
determine the AC - but we do know the TID for any QoS MPDU we
received.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

The current statistics we keep aren't very clear, some are on
MPDUs and some on MSDUs/MMPDUs. Clarify the descriptions based
on the counters mac80211 keeps.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Add these two values:
 * BEACON_RX: number of beacons received from this peer
 * BEACON_SIGNAL_AVG: signal strength average for beacons only

These can then be used for Android Lollipop's statistics request.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

This is really just duplicating the list of information that's
already available in the nl80211 attribute, so remove the list.
Two small changes are needed:
 * remove STATION_INFO_ASSOC_REQ_IES complete, but the length
   (assoc_req_ies_len) can be used instead
 * add NL80211_STA_INFO_RX_DROP_MISC which exists internally
   but not in nl80211 yet

This gets rid of the duplicate maintenance of the two lists.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Add the time spent scanning to the survey data so it can be
reported by drivers that collect such information.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Not all devices are able to report survey data (particularly
time spent for various operations) per channel. As all these
statistics already exist in survey data, allow such devices
to report them (if userspace requested it)
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

All of the survey data is (currently) per channel anyway,
so having the word "channel" in the name does nothing. In
the next patch I'll introduce global data to the survey,
where the word "channel" is actually confusing.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Put the group names into the userspace API header file so that
userspace clients can use symbolic names from there instead of
hardcoding the actual names. This doesn't really change much,
but seems somewhat cleaner.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

With the wiphy::features flag being used up this patch adds a
new field wiphy::ext_features. Considering extensibility this
new field is declared as a byte array. This extensible flag is
exposed to user-space by NL80211_ATTR_EXT_FEATURES.

Cc: Avinash Patil <patila@marvell.com>
Signed-off-by: NGautam (Gautam Kumar) Shukla <gautams@broadcom.com>
Signed-off-by: NArend van Spriel <arend@broadcom.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

The flag is no longer used (and hasn't been for a long time)
since trying to track authentication (and make decisions based
on state) was just causing issues all over - see commit
95de817b.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Some network cards (Intel) produce per-channel regdomains and rely on
cfg80211 to merge rules as needed. This hits the max rules limit and
fails.
Signed-off-by: NArik Nemtsov <arikx.nemtsov@intel.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

An attribute NL80211_ATTR_SOCKET_OWNER can be set by the scan initiator.
If present, the attribute will cause the scan to be stopped if the client
dies.
Signed-off-by: NJukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

If a device has self-managed regulatory, insist on returning the wiphy
specific regdomain if a wiphy-idx is specified. The global regdomain is
meaningless for such devices.

Also add an attribute for self-managed devices, so usermode can
distinguish them as such.
Signed-off-by: NArik Nemtsov <arikx.nemtsov@intel.com>
Reviewed-by: NLuis R. Rodriguez <mcgrof@suse.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Add a new regulatory flag that allows a driver to manage regdomain
changes/updates for its own wiphy.
A self-managed wiphys only employs regulatory information obtained from
the FW and driver and does not use other cfg80211 sources like
beacon-hints, country-code IEs and hints from other devices on the same
system. Conversely, a self-managed wiphy does not share its regulatory
hints with other devices in the system. If a system contains several
devices, one or more of which are self-managed, there might be
contradictory regulatory settings between them. Usage of flag is
generally discouraged. Only use it if the FW/driver is incompatible
with non-locally originated hints.

A new API lets the driver send a complete regdomain, to be applied on
its wiphy only.

After a wiphy-specific regdomain change takes place, usermode will get
a new type of change notification. The regulatory core also takes care
enforce regulatory restrictions, in case some interfaces are on
forbidden channels.
Signed-off-by: NJonathan Doron <jonathanx.doron@intel.com>
Signed-off-by: NArik Nemtsov <arikx.nemtsov@intel.com>
Reviewed-by: NLuis R. Rodriguez <mcgrof@suse.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

If a wiphy-idx is specified, the kernel will return the wiphy specific
regdomain, if such exists. Otherwise return the global regdom.

When no wiphy-idx is specified, return the global regdomain as well as
all wiphy-specific regulatory domains in the system, via a new nested
list of attributes.

Add a new attribute for each wiphy-specific regdomain, for usermode to
identify it as such.
Signed-off-by: NArik Nemtsov <arikx.nemtsov@intel.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

There have been several times where I have had to rebuild a kernel to
cause a panic when hitting a WARN() in the code in order to get a crash
dump from a system.  Sometimes this is easy to do, other times (such as
in the case of a remote admin) it is not trivial to send new images to
the user.

A much easier method would be a switch to change the WARN() over to a
panic.  This makes debugging easier in that I can now test the actual
image the WARN() was seen on and I do not have to engage in remote
debugging.

This patch adds a panic_on_warn kernel parameter and
/proc/sys/kernel/panic_on_warn calls panic() in the
warn_slowpath_common() path.  The function will still print out the
location of the warning.

An example of the panic_on_warn output:

The first line below is from the WARN_ON() to output the WARN_ON()'s
location.  After that the panic() output is displayed.

    WARNING: CPU: 30 PID: 11698 at /home/prarit/dummy_module/dummy-module.c:25 init_dummy+0x1f/0x30 [dummy_module]()
    Kernel panic - not syncing: panic_on_warn set ...

    CPU: 30 PID: 11698 Comm: insmod Tainted: G        W  OE  3.17.0+ #57
    Hardware name: Intel Corporation S2600CP/S2600CP, BIOS RMLSDP.86I.00.29.D696.1311111329 11/11/2013
     0000000000000000 000000008e3f87df ffff88080f093c38 ffffffff81665190
     0000000000000000 ffffffff818aea3d ffff88080f093cb8 ffffffff8165e2ec
     ffffffff00000008 ffff88080f093cc8 ffff88080f093c68 000000008e3f87df
    Call Trace:
     [<ffffffff81665190>] dump_stack+0x46/0x58
     [<ffffffff8165e2ec>] panic+0xd0/0x204
     [<ffffffffa038e05f>] ? init_dummy+0x1f/0x30 [dummy_module]
     [<ffffffff81076b90>] warn_slowpath_common+0xd0/0xd0
     [<ffffffffa038e040>] ? dummy_greetings+0x40/0x40 [dummy_module]
     [<ffffffff81076c8a>] warn_slowpath_null+0x1a/0x20
     [<ffffffffa038e05f>] init_dummy+0x1f/0x30 [dummy_module]
     [<ffffffff81002144>] do_one_initcall+0xd4/0x210
     [<ffffffff811b52c2>] ? __vunmap+0xc2/0x110
     [<ffffffff810f8889>] load_module+0x16a9/0x1b30
     [<ffffffff810f3d30>] ? store_uevent+0x70/0x70
     [<ffffffff810f49b9>] ? copy_module_from_fd.isra.44+0x129/0x180
     [<ffffffff810f8ec6>] SyS_finit_module+0xa6/0xd0
     [<ffffffff8166cf29>] system_call_fastpath+0x12/0x17

Successfully tested by me.

hpa said: There is another very valid use for this: many operators would
rather a machine shuts down than being potentially compromised either
functionally or security-wise.
Signed-off-by: NPrarit Bhargava <prarit@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: NYasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Fabian Frederick <fabf@skynet.be>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch removes bridge mode swdev.
Users can use BRIDGE_FLAGS_SELF to indicate swdev offload
if needed.
Signed-off-by: NRoopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: NScott Feldman <sfeldma@gmail.com>
Signed-off-by: NJiri Pirko <jiri@resnulli.us>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds mode BRIDGE_MODE_UNDEF for cases where mode is not needed.
Signed-off-by: NRoopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: NScott Feldman <sfeldma@gmail.com>
Signed-off-by: NJiri Pirko <jiri@resnulli.us>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When deploying FQ pacing, one thing we noticed is that CUBIC Hystart
triggers too soon.

Having SNMP counters to have an idea of how often the various Hystart
methods trigger is useful prior to any modifications.

This patch adds SNMP counters tracking, how many time "ack train" or
"Delay" based Hystart triggers, and cumulative sum of cwnd at the time
Hystart decided to end SS (Slow Start)

myhost:~# nstat -a | grep Hystart
TcpExtTCPHystartTrainDetect     9                  0.0
TcpExtTCPHystartTrainCwnd       20650              0.0
TcpExtTCPHystartDelayDetect     10                 0.0
TcpExtTCPHystartDelayCwnd       360                0.0

->
 Train detection was triggered 9 times, and average cwnd was
 20650/9=2294,
 Delay detection was triggered 10 times and average cwnd was 36
Signed-off-by: NEric Dumazet <edumazet@google.com>
Acked-by: NNeal Cardwell <ncardwell@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This file is used by iproute2 and should be exported.
Signed-off-by: NStephen Hemminger <stephen@networkplumber.org>
Acked-by: NJiri Pirko <jiri@resnulli.us>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Activate VIRTIO_F_VERSION_1 automatically unless legacy_only
is set.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Pretty straight-forward, just use accessors for all fields.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Replace uXX by __uXX and _packed by __attribute((packed))
as seems to be the norm for userspace headers.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>

Guests need to use virtio scsi API, so export it to uapi,
nice to e.g. qemu and will help us remember this file
affects ABI.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>

virtio 1.0 modified virtio net header format,
making all fields little endian.

Users can tweak header format before submitting it to tun,
but this means more data copies where none were necessary.
And if the iovec is in RO memory, this means we might
need to split iovec also means we might in theory overflow
iovec max size.

This patch adds a simpler way for applications to handle this,
using new "little endian" flag in tun.
As a result, tun simply byte-swaps header fields as appropriate.
This is a NOP on LE architectures.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

TUN_ flags are internal and never exposed
to userspace. Any application using it is almost
certainly buggy.

Move them out to tun.c.

Note: we remove these completely in follow-up patches,
this code movement is split out for ease of review.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Based on patch by Cornelia Huck.

Note: for consistency, and to avoid sparse errors,
      convert all fields, even those no longer in use
      for virtio v1.0.
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Based on patches by Rusty Russell, Cornelia Huck.
Note: more code changes are needed for 1.0 support
(due to different header size).
So we don't advertize support for 1.0 yet.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

set FEATURES_OK as per virtio 1.0 spec
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>

virtio 1.0 makes all memory structures LE, so
we need APIs to conditionally do a byteswap on BE
architectures.

To make it easier to check code statically,
add virtio specific types for multi-byte integers
in memory.

Add low level wrappers that do a byteswap conditionally, these will be
useful e.g. for vhost.  Add high level wrappers that
query device endian-ness and act accordingly.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>

Based on original patches by Rusty Russell, Thomas Huth
and Cornelia Huck.

Note: at this time, we do not negotiate this feature bit
in core, drivers have to declare VERSION_1 support explicitly.

For this reason we treat this bit as a device bit
and not as a transport bit for now.

After all drivers are converted, we will be able to
move VERSION_1 to core and drop it from all drivers.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>

This patch extends the set/get_rxfh ethtool-options for getting or
setting the RSS hash function.

It modifies drivers implementation of set/get_rxfh accordingly.

This change also delegates the responsibility of checking whether a
modification to a certain RX flow hash parameter is supported to the
driver implementation of set_rxfh.

User-kernel API is done through the new hfunc bitmask field in the
ethtool_rxfh struct. A bit set in the hfunc field is corresponding to an
index in the new string-set ETH_SS_RSS_HASH_FUNCS.

Got approval from most of the relevant driver maintainers that their
driver is using Toeplitz, and for the few that didn't answered, also
assumed it is Toeplitz.

Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Ariel Elior <ariel.elior@qlogic.com>
Cc: Prashant Sreedharan <prashant@broadcom.com>
Cc: Michael Chan <mchan@broadcom.com>
Cc: Hariprasad S <hariprasad@chelsio.com>
Cc: Sathya Perla <sathya.perla@emulex.com>
Cc: Subbu Seetharaman <subbu.seetharaman@emulex.com>
Cc: Ajit Khaparde <ajit.khaparde@emulex.com>
Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Cc: Bruce Allan <bruce.w.allan@intel.com>
Cc: Carolyn Wyborny <carolyn.wyborny@intel.com>
Cc: Don Skidmore <donald.c.skidmore@intel.com>
Cc: Greg Rose <gregory.v.rose@intel.com>
Cc: Matthew Vick <matthew.vick@intel.com>
Cc: John Ronciak <john.ronciak@intel.com>
Cc: Mitch Williams <mitch.a.williams@intel.com>
Cc: Amir Vadai <amirv@mellanox.com>
Cc: Solarflare linux maintainers <linux-net-drivers@solarflare.com>
Cc: Shradha Shah <sshah@solarflare.com>
Cc: Shreyas Bhatewara <sbhatewara@vmware.com>
Cc: "VMware, Inc." <pv-drivers@vmware.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: NEyal Perry <eyalpe@mellanox.com>
Signed-off-by: NAmir Vadai <amirv@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Allow reading of timestamps and cmsg at the same time on all relevant
socket families. One use is to correlate timestamps with egress
device, by asking for cmsg IP_PKTINFO.

on AF_INET sockets, call the relevant function (ip_cmsg_recv). To
avoid changing legacy expectations, only do so if the caller sets a
new timestamping flag SOF_TIMESTAMPING_OPT_CMSG.

on AF_INET6 sockets, IPV6_PKTINFO and all other recv cmsg are already
returned for all origins. only change is to set ifindex, which is
not initialized for all error origins.

In both cases, only generate the pktinfo message if an ifindex is
known. This is not the case for ACK timestamps.

The difference between the protocol families is probably a historical
accident as a result of the different conditions for generating cmsg
in the relevant ip(v6)_recv_error function:

ipv4:        if (serr->ee.ee_origin == SO_EE_ORIGIN_ICMP) {
ipv6:        if (serr->ee.ee_origin != SO_EE_ORIGIN_LOCAL) {

At one time, this was the same test bar for the ICMP/ICMP6
distinction. This is no longer true.
Signed-off-by: NWillem de Bruijn <willemb@google.com>

----

Changes
  v1 -> v2
    large rewrite
    - integrate with existing pktinfo cmsg generation code
    - on ipv4: only send with new flag, to maintain legacy behavior
    - on ipv6: send at most a single pktinfo cmsg
    - on ipv6: initialize fields if not yet initialized

The recv cmsg interfaces are also relevant to the discussion of
whether looping packet headers is problematic. For v6, cmsgs that
identify many headers are already returned. This patch expands
that to v4. If it sounds reasonable, I will follow with patches

1. request timestamps without payload with SOF_TIMESTAMPING_OPT_TSONLY
   (http://patchwork.ozlabs.org/patch/366967/)
2. sysctl to conditionally drop all timestamps that have payload or
   cmsg from users without CAP_NET_RAW.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NLey Foon Tan <lftan@altera.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>