drivers/net/appletalk/cops.c: In function `cops_load':
drivers/net/appletalk/cops.c:539: warning: assignment discards qualifiers from pointer target type
drivers/net/appletalk/cops.c:547: warning: assignment discards qualifiers from pointer target type
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

I get a machine check exception, triple fault, or NMI watchdog lockup
when DRI gets enabled on this card.

(And Mauro Tassinari <mtassinari@cmanet.it> reports hung kernels too in
http://lkml.org/lkml/2006/1/26/97)

[ Adrian Bunk also states that this is the only RV350 entry for an RV370
  in our lists, which implies that it's just buggy ]

Cc: Adrian Bunk <bunk@stusta.de>
Cc: Dave Jones <davej@redhat.com>
Cc: Mauro Tassinari <mtassinari@cmanet.it>
Cc: Dave Airlie <airlied@linux.ie>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Before the PCMCIA subsystem was fully integrated into the device and
driver model, the BT3C driver had to workaround this when loading the
firmware. This workaround is broken and makes the driver oops when
loading the firmware. This patch removes this workaround and uses now
the provided device structure from the PCMCIA subsystem.
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

The orinoco wireless driver can support the SMC 2532W-B PC Card, so add the
id for it.
Signed-off-by: NJesse Allen <the3dfxdude@gmail.com>
Cc: Pavel Roskin <proski@gnu.org>
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Update the module version defines.
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Put all code for showing the card's boot info in
one sub-routine.
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Rename get_support function to pcwd_check_temperature_support
so that it is clearer what the function does.
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Add Control Status #2 bits (with defines)
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

more private data of the card to one struct.
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

When doing a __devexit from a card we should also
decrement the cards_found counter.
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

add extra comments for the include files
changes spaces by tabs where it is appropriate.
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

The following makes drivers/char/watchdog/sa1100_wdt.c sparse clean.
(similar to the other watchdog drivers)
Signed-off-by: NIan Campbell <icampbell@arcom.com>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

drivers/video/fbmem.c:1567: warning: 'video_setup' defined but not used
Acked-by: N"Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add support for Geforce4 MX 4000 (0x185)
Signed-off-by: NAntonino Daplas <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The BUS_I2C option is neither available (since there is no VISWS option in
the kernel) nor does it have any effect - so why not remove it?

Based on a report by Jean-Luc Leger <reiga@dspnet.fr.eu.org>.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

- tipar_open(): fix unsigned comparison

- tipar_open(): don't permit NULL pardevice (probably unneeded given the
  above fix).

- tipar_init_module(): handle the situation where parport_register_driver()
  failed to register any devices (parport_register_driver() drops the ->attach
  return value on the floor).

  This probably makes fixes #1 and #2 unneeded.

- tipar_init_module(): fix various error-path resource leaks.
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

When the sclp interface takes very long to serve a request, the sclp core
driver will report a failed request to the sclp tty driver even though the
request is still being processed by the sclp interface.  Eventually the sclp
interface completes the request and updates some fields in the request buffer
which leads to a corrupted tty pages list.  The next time function
sclp_tty_write_room is called, the corrupted list will be traversed, resulting
in an oops.

To avoid this remove the busy retry limit and increase retry intervals.
Signed-off-by: NPeter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix locking in __chp_add() and s390_subchannel_remove_chpid(): Need to
disable/enable because they are always called from a thread (and not
directly from a machine check...)
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Serial drivers in general should not write uart_info->flags - they're
private to serial_core.  Serial drivers have no need to fiddle with
tty->alt_speed, nor manipulate TTY_IO_ERROR in tty->flags.  Fix the
ioc4 serial driver for both these points by simply removing the
offending code.

Acked-by: pfg@sgi.com
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Prevent stalled processing of received data when a driver allocates tty
buffer space but does not immediately follow the allocation with more data
and a call to schedule receive tty processing.  (example: hvc_console) This
bug was introduced by the first locking patch for the new tty buffering.
Signed-off-by: NPaul Fulghum <paulkf@microgate.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Firmware should go into /lib/firmware, not /etc/firmware.

Found by Alejandro Bonilla.
Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Acked-by: NZhu Yi <yi.zhu@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Use seq_file interface for proc output in sba_iommu. Also
clean up the bus root assignment, and give the proc files
a more logical name. Tested on my J6000.
Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>

Gut ccio-dma.c of the ugly proc append and snprintf cruft and
just use seq_printf instead. Tested on a K-class.
Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>

An obvious vi fat finger on my part.
Signed-off-by: NJordan Crouse <jordan.crouse@amd.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This patch adds new PCI serial card support.
Signed-off-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This replaces old direct usage of tty->flip stuff with relative flip API
calls.
Signed-off-by: NVitaly Bordug <vbordug@ru.mvista.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

The DB1550 actually doesn't have a UART2.  Remove it from the list.
Signed-off-by: NJordan Crouse <jordan.crouse@amd.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

On some embedded PowerPC (MPC834x) systems an extra byte would some
times be required to flush data out of the fifo.
serial8250_console_write() was updating the IER in hardware without
also updating the copy in uart_8250_port. This causes issues functions
like serial8250_start_tx() and __stop_tx() to misbehave.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Lucas Correia Villa Real

This patch defines the number of serial ports on the S3C2400.
Signed-off-by: NLucas Correia Villa Real <lucasvr@gobolinux.org>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Quoth BenH:
  "Ok, looks like I forgot to update the Kconfig for the new i2c driver,
   it should select I2C_POWERMAC instead.  Do you want a new patch or
   can you just fix it there ?"
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

we do min() on u8 and small integer constant; cast the latter to u8.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

This patch adds a windfarm module, windfarm_pm112, for the dual core G5s
(both 2 and 4 core models), keeping the machine from getting into
vacuum-cleaner mode ;) For proper credits, the patch was initially
written by Paul Mackerras, and slightly reworked by me to add overtemp
handling among others. The patch also removes the sysfs attributes from
windfarm_pm81 and windfarm_pm91 and instead adds code to the windfarm
core to automagically expose attributes for sensor & controls.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

* compat_alloc_user_space() returns __user pointer
* copying between two userland areas is copy_in_user(), not copy_from_user()
* dereferencing userland pointers is bad
* so's get_user() from local variables

... plus usual __user annotations
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

MTD_XIP depends on having working asm/mtd-xip.h; it's not just per-architecture
(arm-only, as current Kconfig would have it), but actually per-subarch as
well.  Introduced a new symbol (ARCH_MTD_XIP) set by arch Kconfig; MTD_XIP
depends on it.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>