At save step 8, the mfc control register in the CSA should be written
_only_ with Sc and Sm bits (at least MFC_CNTL[Dh] should be set to 0)
Signed-off-by: NMasato Noguchi <Masato.Noguchi@jp.sony.com>
Signed-off-by: NJeremy Kerr <jk@ozlabs.org>
Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com>

The decr_status in the LSCSA is valid only in the sequence of context
restore. Thus, it's nonsense to read and/or write it through spufs.

This patch changes decr_status node to access MFC_CNTL[Ds] in the CSA.
Signed-off-by: NMasato Noguchi <Masato.Noguchi@jp.sony.com>
Signed-off-by: NJeremy Kerr <jk@ozlabs.org>
Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com>

The decr_status in the LSCSA is confusedly used as two meanings:
 * SPU decrementer was running
 * SPU decrementer was wrapped as a result of adjust
and the code to set decr_status is missing.

This patch fixes these problems by using the decr_status argument as a
set of flags. This requires a rebuild of the shipped spu_restore code.
Signed-off-by: NMasato Noguchi <Masato.Noguchi@jp.sony.com>
Signed-off-by: NJeremy Kerr <jk@ozlabs.org>
Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com>

The following steps are not needed in the SPE context save/restore
paths:

Save Step 12: save_mfc_decr()
  save suspend_time to CSA (It will be done by step 14)
  save ch 7 (decrementer value will be saved in LSCSA by spe-side step 10)

Restore Step 59: restore_ch_part1()
  restore ch 1 (it will be done by spe-side step 15)

This change removes the unnecessary steps.
Signed-off-by: NMasato Noguchi <Masato.Noguchi@jp.sony.com>
Signed-off-by: NJeremy Kerr <jk@ozlabs.org>
Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com>

Based on a fix from Masato Noguchi <Masato.Noguchi@jp.sony.com>.

Remove the (incorrect) array size declarations in the spufs channel
arrays, and use ARRAY_SIZE rather than hardcoded values.
Signed-off-by: NJeremy Kerr <jk@ozlabs.org>
Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com>

Currently a process is removed from the physical spu when spu_acquire_saved
is saved but never put back.  This patch adds a new spu_release_saved
that is to be paired with spu_acquire_saved and put the process back if
it has been in RUNNABLE state before.

Niether Jeremy not be are entirely happy about this exact patch because
it adds another spu_activate call outside of the owner thread, but I
feel this is the best short-term fix we can come up with.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJeremy Kerr <jk@ozlabs.org>
Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com>

This patch exports per-context statistics in spufs as long as spu
statistics in sysfs.

It was formed by merging:
"spufs: add spu stats in sysfs"   From: Christoph Hellwig
"spufs: add stat file to spufs"   From: Christoph Hellwig
"spufs: fix libassist accounting" From: Jeremy Kerr
"spusched: fix spu utilization statistics" From: Luke Browning
And some adjustments by myself, after suggestions on cbe-oss-dev.

Having separate patches was making the review process harder
than it should, as we end up integrating spus and ctx statistics
accounting much more than it was on the first implementation.
Signed-off-by: NAndre Detsch <adetsch@br.ibm.com>
Signed-off-by: NJeremy Kerr <jk@ozlabs.org>
Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com>

In 6cbf93960e64f313f6e247cbca7afaa50e3ee2c we added a WARN_ON for
calling spu_deactivate on contexts created with the SPU_CREATE_NOSCHED
flag. However, all NOSCHED contexts will need to be deactivated when
the context is destroyed, so this gives a spurious warning when any
NOSCHED context is closed.

This change removes the WARN_ON.
Signed-off-by: NJeremy Kerr <jk@ozlabs.org>
Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com>

Reading from the signal{1,2} files requires a spu_acquire_saved, so
make these files write-only for contexts created with
SPU_CREATE_NOSCHED.
Signed-off-by: NJeremy Kerr <jk@ozlabs.org>
Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com>

The current SPU context saving procedure in SPUFS unexpectedly
restarts MFC when halting decrementer, because MFC_CNTL[Dh] is set
without MFC_CNTL[Sm]. This bug causes, for example, saving broken DMA
queues. Here is a patch to fix the problem.
Signed-off-by: NKazunori Asayama <asayama@sm.sony.co.jp>
Signed-off-by: NJeremy Kerr <jk@ozlabs.org>
Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com>

WARNING: arch/powerpc/platforms/cell/spufs/spufs.o(.init.text+0x158): Section
mismatch: reference to .exit.text:.spu_sched_exit (between '.init_module' and
'.spu_sched_init')

was introduced by c99c1994
This patch removes the warning.

Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NSebastian Siewior <sebastian@breakpoint.cc>
Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com>

This patch adds support for the setup and decoding of MSIs
on Axon-based Cell systems, using the MSIC mechanism.

This involves setting up an area of BE memory which the Axon
then uses as a FIFO for MSI messages. When one or more MSIs
are decoded by the MSIC we receive an interrupt on the MPIC,
and the MSI messages are written into the FIFO. At the moment
we use a 64KB FIFO, one per MSIC/BE.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com>

This patch adds support for investigating spus information after a
kernel crash event, through kdump vmcore file.
Implementation is based on xmon code, but the new functionality was
kept independent from xmon.
Signed-off-by: NLucio Jose Herculano Correia <luciojhc@br.ibm.com>
Signed-off-by: NAndre Detsch <adetsch@br.ibm.com>
Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com>

The Axon bridge chip used on new Cell/B.E. based blade servers
comes with a DDR2 memory controller that can be used to
attach cheap memory modules, as opposed to the high-speed
XDR memory that is used by the CPU itself.

Since the memory controller does not participate in the
cache coherency protocol, we can not use the memory direcly
for Linux applications, but by providing a block device
it can be used for swap space, temporary file storage and
through the use of the direct_access block device operation
for mapping into user addresses, when it is mounted with
an appropriate file system.
Signed-off-by: NMaxim Shchetynin <maxim@de.ibm.com>
Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com>

The platforms missing the "cpus" property in the "be" node are mono-Cell
platforms such as CAB or Getaway.

Therefore it is possible to assume that if there is no "cpus" properties
under the "be" node then we can safely return the "device node" without
more checking. This is a bit hacky but ... it allows it to work on
these platforms.
Signed-off-by: NJean-Christophe DUBOIS <jcd@tribudubois.net>
Acked-by: NChristian Krafft <krafft@de.ibm.com>
Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com>

Previous patch changed based on Christian Krafft's comment.

On some legacy SLOF tree the generic code is unable to ioremap some Cell BE
registers. Therefore the "generic" functions are returning a NULL pointer,
triggering a crash on such platforms.

Let's handle this more gracefully.
Signed-off-by: NJean-Christophe DUBOIS <jcd@tribudubois.net>
Acked-by: NChristian Kraff <krafft@de.ibm.com>
Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com>

Previous patch changed based on Christian Krafft's comment.

On some legacy SLOF tree the generic code is unable to ioremap some Cell BE
registers. Therefore the "generic" functions are returning a NULL pointer,
triggering a crash on such platforms.

Let's handle this more gracefully.
Signed-off-by: NJean-Christophe DUBOIS <jcd@tribudubois.net>
Acked-by: NChristian Kraff <krafft@de.ibm.com>
Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com>

This patch reorganizes the code of the driver into three files.
Two cbe_cpufreq_pmi.c and cbe_cpufreq_pervasive.c care about hardware.
cbe_cpufreq.c contains the logic.
There is no changed behaviour, except that the PMI related function
is now located in a seperate module cbe_cpufreq_pmi. This module
will be required by cbe_cpufreq, if CONFIG_CBE_CPUFREQ_PMI has been set.
Signed-off-by: NChristian Krafft <krafft@de.ibm.com>
Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com>

Minor issues have been fixed:
* added a missing call to of_node_put()
* signedness of a function parameter
* added some line breaks
* changed global pmi_frequency_limit to a
  per node pmi_slow_mode_limit array
Signed-off-by: NChristian Krafft <krafft@de.ibm.com>
Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com>

This patch fixes the initialization of the cbe_cpufreq driver.
The code that initializes the PMI related functions was called per cpu:
* registering cpufreq notifier block
* registering a pmi handler

This ends in a bug that the notifier block gets called in an endless loop.
The initialization code is being put to the
module init code path by this patch. This way it only gets called once.
Signed-off-by: NChristian Krafft <krafft@de.ibm.com>
Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com>

This patch fixes the debug code that calculates the transition time when
changing the slow modes on a Cell BE cpu.
Signed-off-by: NChristian Krafft <krafft@de.ibm.com>
Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com>

The pmi driver got simplified by removing support for multiple devices.
As there is no more than one pmi device per maschine, there is no need to
specify the device for listening and sending messages.

This way the caller (cbe_cpufreq) doesn't need to scan the device tree.
When registering the handler on a board without a pmi
interface, pmi.c will just return -ENODEV.

The patch that fixed the breakage of cell_defconfig has been
broken out of the earlier version of this patch. So this is
the version that applies cleanly on top of it.
Signed-off-by: NChristian Krafft <krafft@de.ibm.com>
Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com>

The kvm mmu uses page->private on shadow page tables; so does slub, and
an oops result.  Fix by allocating regular pages for shadows instead of
using slub.
Tested-by: NS.Çağlar Onur <caglar@pardus.org.tr>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Allow real-mode emulation of rdmsr and wrmsr.  This allows smp Windows to
boot, presumably for its sipi trampoline.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

The memory slot management functions were oriented against vcpu 0, where
they should be kvm-wide.  This causes hangs starting X on guest smp.

Fix by making the functions (and resultant tail in the mmu) non-vcpu-specific.
Unfortunately this reduces the efficiency of the mmu object cache a bit.  We
may have to revisit this later.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

We need to distinguish between large page shadows which have the nx bit set
and those which don't.  The problem shows up when booting a newer smp Linux
kernel, where the trampoline page (which is in real mode, which uses the
same shadow pages as large pages) is using the same mapping as a kernel data
page, which is mapped using nx, causing kvm to spin on that page.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/sfr/ofcons:
  Create drivers/of/platform.c
  Create linux/of_platorm.h
  [SPARC/64] Rename some functions like PowerPC
  Begin consolidation of of_device.h
  Begin to consolidate of_device.c
  Consolidate of_find_node_by routines
  Consolidate of_get_next_child
  Consolidate of_get_parent
  Consolidate of_find_property
  Consolidate of_device_is_compatible
  Start split out of common open firmware code
  Split out common parts of prom.h

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: appletouch - improve powersaving for Geyser3 devices
  Input: lifebook - fix an oops on Panasonic CF-18
  Input: document intended meaning of KEY_SWITCHVIDEOMODE
  Input: switch to using seq_list_xxx helpers
  Input: i8042 - give more trust to PNP data on i386
  Input: add driver for Fujitsu serial touchscreens
  Input: ads7846 - re-check pendown status before reporting events
  Input: ads7846 - introduce sample settling delay
  Input: xpad - add support for leds on xbox 360 pad

Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinux Torvalds <torvalds@linux-foundation.org>

If add_to_page_cache_lru() fails, the page will not be locked. But
splice jumps to an error path that does a page release and unlock,
causing a BUG() in unlock_page().

Fix this by adding one more label that just releases the page. This bug
was actually triggered on EL5 by gurudas pai <gurudas.pai@oracle.com>
using fio.
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Guests currently use the default scheduler clock: this means they
always use jiffies even if TSC is actually available.  It doesn't make
any noticeable difference here, but it's a better thing to do.

Also remove commented-out asm/sched-clock.h from -mm tree.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The sense of the IF bit is backwards in the host interrupt handling.

This means we always save "IF=1" on the stack when injecting an
interrupt.  It turns out this is almost always correct (unless the
guest is taking a page fault in an interrupt due to an unpopulated
vmalloc mapping), so went unnoticed.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix afs_send_simple_reply() to accept a greater-than-zero return value from
rxrpc_kernel_send_data() as being a successful return rather than thinking it
an error and aborting the call.

rxrpc_kernel_send_data() previously returned zero incorrectly when it worked
successfully, but has been patched to return the number of bytes it
transmitted.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6: (26 commits)
  sh: intc - add support for SH7750 and its variants
  sh: Move entry point code to .text.head.
  sh: heartbeat: Shut up resource size warning.
  sh: update r2d defconfig and fix SH7751R pci compliation
  sh: Many symbol exports for nommu allmodconfig.
  sh: zero terminate 8250 platform data for r2d board
  sh: cpufreq: Fix up the build for SH-2.
  sh: Make on-chip DMA channel selection explicit.
  sh: Fix up CPU dependencies for on-chip DMAC.
  sh: cpufreq: clock framework support.
  sh: Support rate rounding for SH7722 FRQCR clocks.
  sh: Implement clk_round_rate() in the clock framework.
  sh: Fix up PCI section mismatch warnings.
  sh: Wire up fallocate() syscall.
  sh: intc - add support for 7780
  sh: intc - improve group support
  sh: Fix up SH-3 and SH-4 driver dependencies.
  sh: push-switch: Correct license string.
  sh: cpufreq: Fix driver dependencies and flag as broken.
  sh: IPR/INTC2 IRQ setup consolidation.
  ...

* 'linus' of master.kernel.org:/pub/scm/linux/kernel/git/perex/alsa: (102 commits)
  [ALSA] version 1.0.14
  [ALSA] remove duplicate Logitech Quickcam USB ID in usbquirks.h
  [ALSA] hda-codec - Fix input with STAC92xx
  [ALSA] hda-intel: support for iMac 24'' released on 09/2006
  [ALSA] hda-codec - Add quirk for Asus P5LD2
  [ALSA] snd-ca0106: Add support for X-Fi Extreme Audio.
  [ALSA] snd-emu10k1:Enable E-Mu 1616m notebook firmware loading.
  [ALSA] snd-emu10k1: Initial support for E-Mu 1616 and 1616m.
  [ALSA] cs46xx - Fix PM resume
  [ALSA] hda: Enable SPDIF in/out on some stac9205 boards
  [ALSA] timer: check for incorrect device state in non-debug compiles, too
  [ALSA] snd-aoa-codec-onyx: fix typo
  [ALSA] hda-codec - Add quirks for HP dx2200/dx2250
  [ALSA] hda-codec - Rename HP model-specific quirks
  [ALSA] hda-codec - Add quirk for HP Samba
  [ALSA] hda-codec - Add LG LW20 line-in capture source
  [ALSA] usb-audio - Fix AC3 with M-Audio Audiophile USB
  [ALSA] hda: stac9202 mixer fix
  [ALSA] Make s3c24xx_i2s_set_clkdiv() change the correct bits
  [ALSA] hda-codec - Add LG LW20 si3054 modem id
  ...

* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh64-2.6:
  sh64: Flag sh64_get_page() as __init_refok.
  sh64: Move entry point code to .text.head.
  sh64: Fix up PCI section mismatch warnings.
  sh64: Update cayman defconfig.
  sh64: Wire up fallocate() syscall.

* 'cfq' of git://git.kernel.dk/data/git/linux-2.6-block:
  cfq: Write-only stuff in CFQ data structures
  cfq: async queue allocation per priority

Update arm to use bitwise types for its VM_FAULT_ constants.
Signed-off-by: NNick Piggin <npiggin@suse.de>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: (29 commits)
  libata: implement EH fast drain
  libata: schedule probing after SError access failure during autopsy
  libata: clear HOTPLUG flag after a reset
  libata: reorganize ata_ehi_hotplugged()
  libata: improve SCSI scan failure handling
  libata: quickly trigger SATA SPD down after debouncing failed
  libata: improve SATA PHY speed down logic
  The SATA controller device ID is different according to
  ahci: implement SCR_NOTIFICATION r/w
  ahci: make NO_NCQ handling more consistent
  libata: make ->scr_read/write callbacks return error code
  libata: implement AC_ERR_NCQ
  libata: improve EH report formatting
  sata_sil24: separate out sil24_do_softreset()
  sata_sil24: separate out sil24_exec_polled_cmd()
  sata_sil24: replace sil24_update_tf() with sil24_read_tf()
  ahci: separate out ahci_do_softreset()
  ahci: separate out ahci_exec_polled_cmd()
  ahci: separate out ahci_kick_engine()
  ahci: use deadline instead of fixed timeout for 1st FIS for SRST
  ...