Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 15 5月, 2012 2 次提交
    • J
      mtd: Add orion_nand devicetree bindings · a0fabf72
      由 Jamie Lentin 提交于 
      Allow a NAND chip using the orion_nand driver to be described using devicetree.

Changes since last submission (V4) [Addressing comments by]:-
* WARN when bank-width is out of range [Andrew Lunn]

Changes since last submission (V3):-
* Document all parameters [Grant Likely]
* Convert bank-width to be in bytes
* Add explicit defaults for cle, ale and bank-width
Signed-off-by: NJamie Lentin <jm@lentin.co.uk>
Signed-off-by: NJason Cooper <jason@lakedaemon.net>
      a0fabf72
    • J
      ARM: kirkwood: Basic support for DNS-320 and DNS-325 · 9007d100
      由 Jamie Lentin 提交于 
      Add support for the DNS-320 and DNS-325. Describe as much as currently possible
in the devicetree files, create a board-dnskw.c for everything else.

Changes since last submission (V3) [Addressing comments by]:-

* One MACH_DLINK_KIRKWOOD_DT for all dtb files [Grant Likely, Jason Cooper]
* Drop brain-dead select "select CONFIG_MTD_OF_PARTS" [Grant Likely]
* Don't add NAND support then throw it away immediately after [Grant Likely]
* Describe purpose of MPP 41, 42 & 49

Changes since last submission (V2):-

* Use IEEE-compliant "okay", rather than "ok" [Scott Wood]
Signed-off-by: NJamie Lentin <jm@lentin.co.uk>
Signed-off-by: NJason Cooper <jason@lakedaemon.net>
      9007d100
  3. 13 5月, 2012 16 次提交
  5. 12 5月, 2012 16 次提交
    • M
      dm mpath: check if scsi_dh module already loaded before trying to load · 510193a2
      由 Mike Snitzer 提交于 
      If the requested scsi_dh module is already loaded then skip
request_module().

Multipath table loads can hang in an unnecessary __request_module.
Reported-by: NBen Marzinski <bmarzins@redhat.com>
Cc: stable@kernel.org
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
      510193a2
    • A
      dm thin: correct module description · 7cab8bf1
      由 Alasdair G Kergon 提交于 
      Remove duplicate copy of string "device-mapper" (DM_NAME) from
MODULE_DESCRIPTION.
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
      7cab8bf1
    • M
      dm thin: fix unprotected use of prepared_discards list · c3a0ce2e
      由 Mike Snitzer 提交于 
      Fix two places in commit 104655fd ("dm thin: support discards") that
didn't use pool->lock to protect against concurrent changes to the
prepared_discards list.

Without this fix, thin_endio() can race with process_discard(), leading
to concurrent list_add()s that result in the processes locking up with
an error like the following:

WARNING: at lib/list_debug.c:32 __list_add+0x8f/0xa0()
...
list_add corruption. next->prev should be prev (ffff880323b96140), but was ffff8801d2c48440. (next=ffff8801d2c485c0).
...
Pid: 17205, comm: kworker/u:1 Tainted: G        W  O 3.4.0-rc3.snitm+ #1
Call Trace:
 [<ffffffff8103ca1f>] warn_slowpath_common+0x7f/0xc0
 [<ffffffff8103cb16>] warn_slowpath_fmt+0x46/0x50
 [<ffffffffa04f6ce6>] ? bio_detain+0xc6/0x210 [dm_thin_pool]
 [<ffffffff8124ff3f>] __list_add+0x8f/0xa0
 [<ffffffffa04f70d2>] process_discard+0x2a2/0x2d0 [dm_thin_pool]
 [<ffffffffa04f6a78>] ? remap_and_issue+0x38/0x50 [dm_thin_pool]
 [<ffffffffa04f7c3b>] process_deferred_bios+0x7b/0x230 [dm_thin_pool]
 [<ffffffffa04f7df0>] ? process_deferred_bios+0x230/0x230 [dm_thin_pool]
 [<ffffffffa04f7e42>] do_worker+0x52/0x60 [dm_thin_pool]
 [<ffffffff81056fa9>] process_one_work+0x129/0x450
 [<ffffffff81059b9c>] worker_thread+0x17c/0x3c0
 [<ffffffff81059a20>] ? manage_workers+0x120/0x120
 [<ffffffff8105eabe>] kthread+0x9e/0xb0
 [<ffffffff814ceda4>] kernel_thread_helper+0x4/0x10
 [<ffffffff8105ea20>] ? kthread_freezable_should_stop+0x70/0x70
 [<ffffffff814ceda0>] ? gs_change+0x13/0x13
---[ end trace 7e0a523bc5e52692 ]---
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
      c3a0ce2e
    • M
      dm thin: reinstate missing mempool_free in cell_release_singleton · 03aaae7c
      由 Mike Snitzer 提交于 
      Fix a significant memory leak inadvertently introduced during
simplification of cell_release_singleton() in commit
6f94a4c4 ("dm thin: fix stacked bi_next
usage").

A cell's hlist_del() must be accompanied by a mempool_free().
Use __cell_release() to do this, like before.
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
      03aaae7c
    • S
      gpio/exynos: Fix compiler warnings when non-exynos machines are selected · 2760f7ad
      由 Sachin Kamat 提交于 
      Fixes the following compiler warnings:

drivers/gpio/gpio-samsung.c: In function ‘samsung_gpiolib_init’:
drivers/gpio/gpio-samsung.c:2980:1: warning: label ‘err_ioremap1’ defined but not used [-Wunused-label]
drivers/gpio/gpio-samsung.c:2978:1: warning: label ‘err_ioremap2’ defined but not used [-Wunused-label]
drivers/gpio/gpio-samsung.c:2976:1: warning: label ‘err_ioremap3’ defined but not used [-Wunused-label]
drivers/gpio/gpio-samsung.c:2974:1: warning: label ‘err_ioremap4’ defined but not used [-Wunused-label]
drivers/gpio/gpio-samsung.c:2722:55: warning: unused variable ‘gpio_base4’ [-Wunused-variable]

drivers/gpio/gpio-samsung.c:455:32: warning: ‘exynos_gpio_cfg’ defined but not used [-Wunused-variable]
drivers/gpio/gpio-samsung.c:2126:33: warning: ‘exynos4_gpios_1’ defined but not used [-Wunused-variable]
drivers/gpio/gpio-samsung.c:2228:33: warning: ‘exynos4_gpios_2’ defined but not used [-Wunused-variable]
drivers/gpio/gpio-samsung.c:2373:33: warning: ‘exynos4_gpios_3’ defined but not used [-Wunused-variable]
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
      2760f7ad
    • T
      gpio: pch9: Use proper flow type handlers · df9541a6
      由 Thomas Gleixner 提交于 
      Jean-Francois Dagenais reported:

 Configuring a gpio pin with the gpio-pch driver with
 "IRQF_TRIGGER_LOW | IRQF_ONESHOT" generates an interrupt storm for
 threaded ISR until the ISR thread actually gets to physically clear
 the interrupt on the triggering chip!! The immediate observable
 symptom is the high CPU usage for my ISR thread task and the
 interrupt count in /proc/interrupts incrementing radically.

The driver is wrong in several ways:

1) Using handle_simple_irq() does not provide proper flow control
   handling. In the case of oneshot threaded handlers for the
   demultiplexed interrupts this results in an interrupt storm because
   the simple handler does not deal with masking/unmasking.  Even
   without threaded oneshot handlers an interrupt storm for level type
   interrupts can easily be triggered when the interrupt is disabled
   and the interrupt line is activated from the device.

2) Acknowlegding the demultiplexed interrupt before calling the
   handler is wrong for level type interrupts.

3) The set_type function unconditionally enables the interrupt. It's
   supposed to set the type and nothing else. The unmasking is done by
   the core code.

Move the acknowledge code into a separate function and add it to the
demux irqchip callbacks.

Remove the unconditional enabling from the set_type() callback and set
the proper flow handlers depending on the selected type (level/edge).
Reported-and-tested-by: NJean-Francois Dagenais <jeff.dagenais@gmail.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
      df9541a6
    • L
      Merge tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux-2.6 · bcc62fb0
      由 Linus Torvalds 提交于 
      Pull GPIO omap bug fix from Grant Likely.

* tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux-2.6:
  gpio/omap: fix incorrect initialization of omap_gpio_mod_init
      bcc62fb0
    • L
      Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc · ec53646f
      由 Linus Torvalds 提交于 
      Pull another powerpc irq fix from Benjamin Herrenschmidt:
 "It looks like my previous fix for the lazy irq masking problem wasn't
  quite enough.  There was another problem related to performance
  monitor interrupts acting as NMIs leaving the flags in an incorrect
  state.  Here's a fix that finally seems to make perf solid again."

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc/irq: Fix another case of lazy IRQ state getting out of sync
      ec53646f
    • L
      Merge branch '3.4-urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending · 04e53358
      由 Linus Torvalds 提交于 
      Pull target fix from Nicholas Bellinger:
 "This patch removes some incorrect legacy code to free se_lun_acl
  memory in the NodeACL release path that could potentially trigger an
  OOPS during shutdown once dynamic -> explicit initiator NodeACL
  conversion has occurred.

  That said, we've been able to trigger an OOPS in v4.0 code for this
  special case when the associated MappedLUNs had not also been made
  explicit based on active TPG LUN layout during the conversion, so it
  really makes senses to go ahead and drop this extra cruft to avoid any
  possible issues here.

  This ends up only effecting iscsi-target module code (it's the only
  user) and is CC'ed to stable."

* '3.4-urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
  target: Drop incorrect se_lun_acl release for dynamic -> explict ACL conversion
      04e53358
    • B
      powerpc/irq: Fix another case of lazy IRQ state getting out of sync · 7c0482e3
      由 Benjamin Herrenschmidt 提交于 
      So we have another case of paca->irq_happened getting out of
sync with the HW irq state. This can happen when a perfmon
interrupt occurs while soft disabled, as it will return to a
soft disabled but hard enabled context while leaving a stale
PACA_IRQ_HARD_DIS flag set.

This patch fixes it, and also adds a test for the condition
of those flags being out of sync in arch_local_irq_restore()
when CONFIG_TRACE_IRQFLAGS is enabled.

This helps catching those gremlins faster (and so far I
can't seem see any anymore, so that's good news).
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
      7c0482e3
    • S
      ks8851: Update link status during link change interrupt · 062e55e3
      由 Stephen Boyd 提交于 
      If a link change interrupt comes in we just clear the interrupt
and continue along without notifying the upper networking layers
that the link has changed. Use the mii_check_link() function to
update the link status whenever a link change interrupt occurs.

Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      062e55e3
    • B
      macvtap: restore vlan header on user read · f09e2249
      由 Basil Gor 提交于 
      Ethernet vlan header is not on the packet and kept in the skb->vlan_tci
when it comes from lower dev. This patch inserts vlan header in user
buffer during skb copy on user read.
Signed-off-by: NBasil Gor <basil.gor@gmail.com>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      f09e2249
    • B
      vhost-net: fix handle_rx buffer size · c53cff5e
      由 Basil Gor 提交于 
      Take vlan header length into account, when vlan id is stored as
vlan_tci. Otherwise tagged packets coming from macvtap will be
truncated.
Signed-off-by: NBasil Gor <basil.gor@gmail.com>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      c53cff5e
    • N
      target: Drop incorrect se_lun_acl release for dynamic -> explict ACL conversion · cfebf8f4
      由 Nicholas Bellinger 提交于 
      This patch removes some potentially problematic legacy code within
core_clear_initiator_node_from_tpg() that was originally intended to
release left over se_lun_acl setup during dynamic NodeACL+MappedLUN
generate when running with TPG demo-mode operation.

Since we now only ever expect to allocate and release se_lun_acl from
within target_core_fabric_configfs.c:target_fabric_make_mappedlun() and
target_fabric_drop_mappedlun() context respectively, this code for
demo-mode release is incorrect and needs to be removed.

Cc: Christoph Hellwig <hch@lst.de>
Cc: Andy Grover <agrover@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
      cfebf8f4
    • L
      Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu · 4e25651b
      由 Linus Torvalds 提交于 
      Pull a m68knommu fix from Greg Ungerer:
 "It contains a single fix for including the ColdFire QSPI interface
  setup code when enabled as a module.  This was broken in the
  consolidation of the ColdFire SoC device tables in the 3.4 merge
  window."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68knommu: enable qspi support when SPI_COLDFIRE_QSPI = m
      4e25651b
    • H
      mm: raise MemFree by reverting percpu_pagelist_fraction to 0 · 1b76b02f
      由 Hugh Dickins 提交于 
      Why is there less MemFree than there used to be?  It perturbed a test,
so I've just been bisecting linux-next, and now find the offender went
upstream yesterday.

Commit 93278814 "mm: fix division by 0 in percpu_pagelist_fraction()"
mistakenly initialized percpu_pagelist_fraction to the sysctl's minimum 8,
which leaves 1/8th of memory on percpu lists (on each cpu??); but most of
us expect it to be left unset at 0 (and it's not then used as a divisor).

  MemTotal: 8061476kB  8061476kB  8061476kB  8061476kB  8061476kB  8061476kB
  Repetitive test with percpu_pagelist_fraction 8:
  MemFree:  6948420kB  6237172kB  6949696kB  6840692kB  6949048kB  6862984kB
  Same test with percpu_pagelist_fraction back to 0:
  MemFree:  7945000kB  7944908kB  7948568kB  7949060kB  7948796kB  7948812kB
Signed-off-by: NHugh Dickins <hughd@google.com>
[ We really should fix the crazy sysctl interface too, but that's a
  separate thing - Linus ]
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      1b76b02f
  7. 11 5月, 2012 6 次提交
    • J
      bonding: don't increase rx_dropped after processing LACPDUs · 13a8e0c8
      由 Jiri Bohac 提交于 
      Since commit 3aba891d, bonding processes LACP frames (802.3ad
mode) with bond_handle_frame(). Currently a copy of the skb is
made and the original is left to be processed by other
rx_handlers and the rest of the network stack by returning
RX_HANDLER_ANOTHER.  As there is no protocol handler for
PKT_TYPE_LACPDU, the frame is dropped and dev->rx_dropped
increased.

Fix this by making bond_handle_frame() return RX_HANDLER_CONSUMED
if bonding has processed the LACP frame.
Signed-off-by: NJiri Bohac <jbohac@suse.cz>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      13a8e0c8
    • E
      connector/userns: replace netlink uses of cap_raised() with capable() · 38bf1953
      由 Eric W. Biederman 提交于 
      In 2009 Philip Reiser notied that a few users of netlink connector
interface needed a capability check and added the idiom
cap_raised(nsp->eff_cap, CAP_SYS_ADMIN) to a few of them, on the premise
that netlink was asynchronous.

In 2011 Patrick McHardy noticed we were being silly because netlink is
synchronous and removed eff_cap from the netlink_skb_params and changed
the idiom to cap_raised(current_cap(), CAP_SYS_ADMIN).

Looking at those spots with a fresh eye we should be calling
capable(CAP_SYS_ADMIN).  The only reason I can see for not calling capable
is that it once appeared we were not in the same task as the caller which
would have made calling capable() impossible.

In the initial user_namespace the only difference between between
cap_raised(current_cap(), CAP_SYS_ADMIN) and capable(CAP_SYS_ADMIN) are a
few sanity checks and the fact that capable(CAP_SYS_ADMIN) sets
PF_SUPERPRIV if we use the capability.

Since we are going to be using root privilege setting PF_SUPERPRIV seems
the right thing to do.

The motivation for this that patch is that in a child user namespace
cap_raised(current_cap(),...) tests your capabilities with respect to that
child user namespace not capabilities in the initial user namespace and
thus will allow processes that should be unprivielged to use the kernel
services that are only protected with cap_raised(current_cap(),..).

To fix possible user_namespace issues and to just clean up the code
replace cap_raised(current_cap(), CAP_SYS_ADMIN) with
capable(CAP_SYS_ADMIN).
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Cc: Patrick McHardy <kaber@trash.net>
Cc: Philipp Reisner <philipp.reisner@linbit.com>
Acked-by: NSerge E. Hallyn <serge.hallyn@canonical.com>
Acked-by: NAndrew G. Morgan <morgan@kernel.org>
Cc: Vasiliy Kulikov <segoon@openwall.com>
Cc: David Howells <dhowells@redhat.com>
Reviewed-by: NJames Morris <james.l.morris@oracle.com>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      38bf1953
    • N
      sctp: check cached dst before using it · e0268868
      由 Nicolas Dichtel 提交于 
      dst_check() will take care of SA (and obsolete field), hence
IPsec rekeying scenario is taken into account.
Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: NVlad Yaseivch <vyasevich@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      e0268868
    • E
      pktgen: fix crash at module unload · c57b5468
      由 Eric Dumazet 提交于 
      commit 7d3d43da (net: In unregister_netdevice_notifier unregister
the netdevices.) makes pktgen crashing at module unload.

[  296.820578] BUG: spinlock bad magic on CPU#6, rmmod/3267
[  296.820719]  lock: ffff880310c38000, .magic: ffff8803, .owner: <none>/-1, .owner_cpu: -1
[  296.820943] Pid: 3267, comm: rmmod Not tainted 3.4.0-rc5+ #254
[  296.821079] Call Trace:
[  296.821211]  [<ffffffff8168a715>] spin_dump+0x8a/0x8f
[  296.821345]  [<ffffffff8168a73b>] spin_bug+0x21/0x26
[  296.821507]  [<ffffffff812b4741>] do_raw_spin_lock+0x131/0x140
[  296.821648]  [<ffffffff8169188e>] _raw_spin_lock+0x1e/0x20
[  296.821786]  [<ffffffffa00cc0fd>] __pktgen_NN_threads+0x4d/0x140 [pktgen]
[  296.821928]  [<ffffffffa00ccf8d>] pktgen_device_event+0x10d/0x1e0 [pktgen]
[  296.822073]  [<ffffffff8154ed4f>] unregister_netdevice_notifier+0x7f/0x100
[  296.822216]  [<ffffffffa00d2a0b>] pg_cleanup+0x48/0x73 [pktgen]
[  296.822357]  [<ffffffff8109528e>] sys_delete_module+0x17e/0x2a0
[  296.822502]  [<ffffffff81699652>] system_call_fastpath+0x16/0x1b

Hold the pktgen_thread_lock while splicing pktgen_threads, and test
pktgen_exiting in pktgen_device_event() to make unload faster.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      c57b5468
    • D
      Revert "net: maintain namespace isolation between vlan and real device" · 59b9997b
      由 David S. Miller 提交于 
      This reverts commit 8a83a00b.

It causes regressions for S390 devices, because it does an
unconditional DST drop on SKBs for vlans and the QETH device
needs the neighbour entry hung off the DST for certain things
on transmit.

Arnd can't remember exactly why he even needed this change.

Conflicts:

	drivers/net/macvlan.c
	net/8021q/vlan_dev.c
	net/core/dev.c
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      59b9997b
    • T
      ehea: fix losing of NEQ events when one event occurred early · 380ec964
      由 Thadeu Lima de Souza Cascardo 提交于 
      The NEQ interrupt is only triggered when there was no previous pending
interrupt. If we request irq handling after an interrupt has occurred,
we will never get an interrupt until we call H_RESET_EVENTS.

Events seem to be cleared when we first register the NEQ. So, when we
requested irq handling right after registering it, a possible race with
an interrupt was much less likely. Now, there is a chance we may lose
this race and never get any events.

The fix here is to poll and acknowledge any events that might have
happened right after registering the irq handler.
Signed-off-by: NThadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      380ec964