Use ktime_get_ts() to take the timestamp instead of getnstimestamp().  This
patch prepares to remove getnstimestamp() by switching its only user to a
different function with almost exactly the same code.
Signed-off-by: NMatt Helsley <matthltc@us.ibm.com>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

These days ioctl32.h is only used for communication of fs/compat.c and
fs/compat_ioctl.c and doesn't contain anything of interest to drivers.

Remove inclusion in various drivers.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add a compat_ioctl method to the dasd driver so the last entries in
arch/s390/kernel/compat_ioctl.c can go away.  Unlike the previous attempt this
one does not replace the ioctl method with an unlocked_ioctl method so that
the ioctl_by_bdev calls in s390 partition code continue to work.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The only own ioctl, TAPE390_DISPLAY, is compat_clean, everything else is
routed through common translation code.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Again easy because all ioctls are compat clean.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Removes the call to get_cpu() and put_cpu() as it is not required.
Signed-off-by: NVivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

- Kexec on panic functionality allocates memory for saving cpu registers in
  case of system crash event.  Address of this allocated memory needs to be
  exported to user space, which is used by kexec-tools.

- Previously, a single /sys/kernel/crash_notes entry was being exported as
  memory allocated was a single continuous array.  Now memory allocation being
  dyanmic and per cpu based, address of per cpu buffer is exported through
  "/sys/devices/system/cpu/cpuX/crash_notes"
Signed-off-by: NVivek Goyal <vgoyal@in.ibm.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Do it via Kconfig rather than via #error.
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

...
  CC [M]  drivers/char/ipmi/ipmi_msghandler.o
drivers/char/ipmi/ipmi_msghandler.c:3301: `proc_ipmi_root' undeclared here (not in a function)
drivers/char/ipmi/ipmi_msghandler.c:3301: initializer element is not constant
drivers/char/ipmi/ipmi_msghandler.c:3301: (near initialization for `__ksymtab_proc_ipmi_root.value')
drivers/char/ipmi/ipmi_msghandler.c:1535: warning: `ipmb_file_read_proc' defined but not used
drivers/char/ipmi/ipmi_msghandler.c:1551: warning: `version_file_read_proc' defined but not used
drivers/char/ipmi/ipmi_msghandler.c:1561: warning: `stat_file_read_proc' defined but not used
...
  CC [M]  drivers/char/ipmi/ipmi_poweroff.o
drivers/char/ipmi/ipmi_poweroff.c: In function `ipmi_poweroff_init':
drivers/char/ipmi/ipmi_poweroff.c:616: warning: implicit declaration of function `unregister_sysctl_table'
drivers/char/ipmi/ipmi_poweroff.c:616: `ipmi_table_header' undeclared (first use in this function)
drivers/char/ipmi/ipmi_poweroff.c:616: (Each undeclared identifier is reported only once
drivers/char/ipmi/ipmi_poweroff.c:616: for each function it appears in.)
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Cc: Corey Minyard <minyard@acm.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

A simple driver for the CS5535 and CS5536 that allows a user-space program
to manipulate GPIO pins.  The CS5535/CS5536 chips are Geode processor
companion devices.
Signed-off-by: NBen Gardner <bgardner@wabtec.com>
Signed-off-by: NRichard Knutsson <ricknu-0@student.ltu.se>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Recent X "nv" driver was fixed for various issues with modern 6xxx and 7xxx
cards.  This patch ports those fixes to nvidiafb.  This makes it work fine
on the 6600 bundled with the newest G5 macs.  I've verified it still works
on the 5200FX of the iMacG5.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: N"Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Not all architectures implement asm/serial.h, and the driver doesn't appear to
need it anyway.

Cc: Paul Fulghum <paulkf@microgate.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

convert the block loop device from semaphores to completions.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The patch changes semaphores that are initialized as
locked to complete().

Source: MontaVista Software, Inc.
Modified-by: NSteven Rostedt <rostedt@goodmis.org>

The following patch is from Montavista.  I modified it slightly.
Semaphores are currently being used where it makes more sense for
completions.  This patch corrects that.
Signed-off-by: NAleksey Makarov <amakarov@ru.mvista.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

change CPU3WDT semaphores to completions.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

change SX8 semaphores to completions.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This patch converts the inode semaphore to a mutex. I have tested it on
XFS and compiled as much as one can consider on an ia64. Anyway your
luck with it might be different.
Modified-by: NIngo Molnar <mingo@elte.hu>

(finished the conversion)
Signed-off-by: NJes Sorensen <jes@sgi.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

more mutex debugging: check for held locks during memory freeing,
task exit, enable sysrq printouts, etc.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NArjan van de Ven <arjan@infradead.org>

Here's a small patch with a few tiny fixups for the EHCI Kconfig help
text. Please consider applying.
Signed-off-by: NJesper Juhl <juhl-lkml@dif.dk>
Signed-off-by: NAdrian Bunk <bunk@stusta.de>

Additionally, one comment was reformulated by Joe Perches <joe@perches.com>.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>

Signed-off-by: NAdrian Bunk <bunk@stusta.de>

Signed-off-by: NAdrian Bunk <bunk@stusta.de>

A new device to do intermidiate functional block in a system shared
manner.  To use the new functionality, you need to turn on
qos/classifier actions.

The new functionality can be grouped as:

1) qdiscs/policies that are per device as opposed to system wide.  ifb
allows for a device which can be redirected to thus providing an
impression of sharing.

2) Allows for queueing incoming traffic for shaping instead of
dropping.

Packets are redirected to this device using tc/action mirred redirect
construct. If they are sent to it by plain routing instead then they
will merely be dropped and the stats would indicate that.
Signed-off-by: NJamal Hadi Salim <hadi@cyberus.ca>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

With the previous missing-unlock fix the spinlock is dropped only
after the tty->driver->write() call which might sleep.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As the Crypto API now allows multiple implementations to be registered
for the same algorithm, we no longer have to play tricks with Kconfig
to select the right AES implementation.

This patch sets the driver name and priority for all the AES
implementations and removes the Kconfig conditions on the C implementation
for AES.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

A lot of crypto code needs to read/write a 32-bit/64-bit words in a
specific gender.  Many of them open code them by reading/writing one
byte at a time.  This patch converts all the applicable usages over
to use the standard byte order macros.

This is based on a previous patch by Denis Vlasenko.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Change the bit-field in struct cword to unsigned to shut sparse up.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Some hosts need to know that a transfer will be multi-block.
Add a data flag to indicate multiple data block transfers.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Another reason to use:

	ret = foo();
	if (ret < 0)
		goto out;
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

sg_page_malloc should clear the data buffer, not that extent of mem_map.

This fixes Jesper's sg_page_free "Bad page states"
Signed-off-by: NHugh Dickins <hugh@veritas.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

- Clean up a recently introduced spaces vs tabs whitespace problem.
Signed-off-by: NChris Pascoe <c.pascoe@itee.uq.edu.au>
Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>

- replace omitted 'TODO:'
Signed-off-by: NMichael Krufky <mkrufky@m1k.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>

- Move the code that patches bluebird firmware before upload from the
generic code into the cxusb driver itself.
Signed-off-by: NPatrick Boettcher <pb@linuxtv.org>
Signed-off-by: NMichael Krufky <mkrufky@m1k.net>
Signed-off-by: NChris Pascoe <c.pascoe@itee.uq.edu.au>
Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>

- Add VIDIOC_LOG_STATUS to the radio device ioctl list.
- Reduce the confusion between modes and standards
- Fix stereo reporting for radio.
- Don't set i2c configuration if the chip doesn't support it.
- Fix reporting of current standard for radio.
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>

- Implemented v4l2 api for sliced vbi data output
to pass WSS data from userspace to the av7110
Signed-off-by: NOliver Endriss <o.endriss@gmx.de>
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>

- Check capabilities for audio settings (volume, balance,
bass, treble, loudness, mute)
- added loudness support
- added missing VIDEO_AUDIO_BALANCE flags for v4l1 compatibility
- do not call msp_any_detect_stereo for non-autoselect chips to
retrieve the current stereo setting: that will temporarily mute
the sound. It is only needed when the stereo mode might be
changed, and for autoselect msp processors that do not periodically
need to update their stereo setting.
- do not wake up the thread if the standard did not change. Prevents
temporary audio drop-out if the standard is set to the same value.
- fix confused stereo detect code where V4L2_TUNER_SUB_STEREO and
V4L2_TUNER_MODE_STEREO values were used incorrectly.
- stereo mode reporting was broken (v4l2 value used to index a
string array expecting v4l1 mode values).
- do not set dsp register 0x30 in the 3410d thread: that register
does not exist for pre-'G' revision msp chips.
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>

- A new Kconfig option makes the user able to select if the dibusb-mb driver shall claim faulty programmed USB devices which are coming with default Cypress USB IDs.
Signed-off-by: NPatrick Boettcher <pb@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>

- Some whitespaces cleaned up
- unused code removed
Signed-off-by: NPatrick Boettcher <pb@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>

- Indention cleaned for tabsize=8
Signed-off-by: NPatrick Boettcher <pb@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>

- Check if in the dvb-usb-device-structure the dvb_pll_desc is set before use.
Signed-off-by: NPatrick Boettcher <pb@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>