- 27 5月, 2014 1 次提交
-
-
由 Mukesh Rathor 提交于
When running as a dom0 in PVH mode, foreign pfns that are accessed must be added to our p2m which is managed by xen. This is done via XENMEM_add_to_physmap_range hypercall. This is needed for toolstack building guests and mapping guest memory, xentrace mapping xen pages, etc. Signed-off-by: NMukesh Rathor <mukesh.rathor@oracle.com> Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
-
- 15 5月, 2014 1 次提交
-
-
由 David Vrabel 提交于
_PAGE_IOMAP is used in xen_remap_domain_mfn_range() to prevent the pfn_pte() call in remap_area_mfn_pte_fn() from using the p2m to translate the MFN. If mfn_pte() is used instead, the p2m look up is avoided and the use of _PAGE_IOMAP is no longer needed. Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com> Reviewed-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com> Tested-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
- 06 5月, 2014 1 次提交
-
-
由 Andy Lutomirski 提交于
This makes the 64-bit and x32 vdsos use the same mechanism as the 32-bit vdso. Most of the churn is deleting all the old fixmap code. Signed-off-by: NAndy Lutomirski <luto@amacapital.net> Link: http://lkml.kernel.org/r/8af87023f57f6bb96ec8d17fce3f88018195b49b.1399317206.git.luto@amacapital.netSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
- 25 3月, 2014 1 次提交
-
-
由 David Vrabel 提交于
This reverts commit a9c8e4be. PTEs in Xen PV guests must contain machine addresses if _PAGE_PRESENT is set and pseudo-physical addresses is _PAGE_PRESENT is clear. This is because during a domain save/restore (migration) the page table entries are "canonicalised" and uncanonicalised". i.e., MFNs are converted to PFNs during domain save so that on a restore the page table entries may be rewritten with the new MFNs on the destination. This canonicalisation is only done for PTEs that are present. This change resulted in writing PTEs with MFNs if _PAGE_PROTNONE (or _PAGE_NUMA) was set but _PAGE_PRESENT was clear. These PTEs would be migrated as-is which would result in unexpected behaviour in the destination domain. Either a) the MFN would be translated to the wrong PFN/page; b) setting the _PAGE_PRESENT bit would clear the PTE because the MFN is no longer owned by the domain; or c) the present bit would not get set. Symptoms include "Bad page" reports when munmapping after migrating a domain. Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com> Acked-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: <stable@vger.kernel.org> [3.12+]
-
- 14 3月, 2014 1 次提交
-
-
由 H. Peter Anvin 提交于
Checkin b0b49f26 x86, vdso: Remove compat vdso support ... removed the VDSO from the fixmap, and thus FIX_VDSO; remove a stray reference in Xen. Found by Fengguang Wu's test robot. Reported-by: NFengguang Wu <fengguang.wu@intel.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: David Vrabel <david.vrabel@citrix.com> Link: http://lkml.kernel.org/r/4bb4690899106eb11430b1186d5cc66ca9d1660c.1394751608.git.luto@amacapital.netSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
- 11 2月, 2014 1 次提交
-
-
由 Mel Gorman 提交于
Steven Noonan forwarded a users report where they had a problem starting vsftpd on a Xen paravirtualized guest, with this in dmesg: BUG: Bad page map in process vsftpd pte:8000000493b88165 pmd:e9cc01067 page:ffffea00124ee200 count:0 mapcount:-1 mapping: (null) index:0x0 page flags: 0x2ffc0000000014(referenced|dirty) addr:00007f97eea74000 vm_flags:00100071 anon_vma:ffff880e98f80380 mapping: (null) index:7f97eea74 CPU: 4 PID: 587 Comm: vsftpd Not tainted 3.12.7-1-ec2 #1 Call Trace: dump_stack+0x45/0x56 print_bad_pte+0x22e/0x250 unmap_single_vma+0x583/0x890 unmap_vmas+0x65/0x90 exit_mmap+0xc5/0x170 mmput+0x65/0x100 do_exit+0x393/0x9e0 do_group_exit+0xcc/0x140 SyS_exit_group+0x14/0x20 system_call_fastpath+0x1a/0x1f Disabling lock debugging due to kernel taint BUG: Bad rss-counter state mm:ffff880e9ca60580 idx:0 val:-1 BUG: Bad rss-counter state mm:ffff880e9ca60580 idx:1 val:1 The issue could not be reproduced under an HVM instance with the same kernel, so it appears to be exclusive to paravirtual Xen guests. He bisected the problem to commit 1667918b ("mm: numa: clear numa hinting information on mprotect") that was also included in 3.12-stable. The problem was related to how xen translates ptes because it was not accounting for the _PAGE_NUMA bit. This patch splits pte_present to add a pteval_present helper for use by xen so both bare metal and xen use the same code when checking if a PTE is present. [mgorman@suse.de: wrote changelog, proposed minor modifications] [akpm@linux-foundation.org: fix typo in comment] Reported-by: NSteven Noonan <steven@uplinklabs.net> Tested-by: NSteven Noonan <steven@uplinklabs.net> Signed-off-by: NElena Ufimtseva <ufimtseva@gmail.com> Signed-off-by: NMel Gorman <mgorman@suse.de> Reviewed-by: NDavid Vrabel <david.vrabel@citrix.com> Acked-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: <stable@vger.kernel.org> [3.12+] Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 30 1月, 2014 1 次提交
-
-
由 Andi Kleen 提交于
The paravirt thunks use a hack of using a static reference to a static function to reference that function from the top level statement. This assumes that gcc always generates static function names in a specific format, which is not necessarily true. Simply make these functions global and asmlinkage or __visible. This way the static __used variables are not needed and everything works. Functions with arguments are __visible to keep the register calling convention on 32bit. Changed in paravirt and in all users (Xen and vsmp) v2: Use __visible for functions with arguments Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Ido Yariv <ido@wizery.com> Signed-off-by: NAndi Kleen <ak@linux.intel.com> Link: http://lkml.kernel.org/r/1382458079-24450-5-git-send-email-andi@firstfloor.orgSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
- 06 1月, 2014 4 次提交
-
-
由 Mukesh Rathor 提交于
We also optimize one - the TLB flush. The native operation would needlessly IPI offline VCPUs causing extra wakeups. Using the Xen one avoids that and lets the hypervisor determine which VCPU needs the TLB flush. Signed-off-by: NMukesh Rathor <mukesh.rathor@oracle.com> Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
由 Mukesh Rathor 提交于
.. which are surprisingly small compared to the amount for PV code. PVH uses mostly native mmu ops, we leave the generic (native_*) for the majority and just overwrite the baremetal with the ones we need. At startup, we are running with pre-allocated page-tables courtesy of the tool-stack. But we still need to graft them in the Linux initial pagetables. However there is no need to unpin/pin and change them to R/O or R/W. Note that the xen_pagetable_init due to 7836fec9d0994cc9c9150c5a33f0eb0eb08a335a "xen/mmu/p2m: Refactor the xen_pagetable_init code." does not need any changes - we just need to make sure that xen_post_allocator_init does not alter the pvops from the default native one. Signed-off-by: NMukesh Rathor <mukesh.rathor@oracle.com> Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
-
由 Konrad Rzeszutek Wilk 提交于
Stefano noticed that the code runs only under 64-bit so the comments about 32-bit are pointless. Also we change the condition for xen_revector_p2m_tree returning the same value (because it could not allocate a swath of space to put the new P2M in) or it had been called once already. In such we return early from the function. Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
-
由 Konrad Rzeszutek Wilk 提交于
The revectoring and copying of the P2M only happens when !auto-xlat and on 64-bit builds. It is not obvious from the code, so lets have seperate 32 and 64-bit functions. We also invert the check for auto-xlat to make the code flow simpler. Suggested-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
- 15 11月, 2013 2 次提交
-
-
由 Kirill A. Shutemov 提交于
If split page table lock is in use, we embed the lock into struct page of table's page. We have to disable split lock, if spinlock_t is too big be to be embedded, like when DEBUG_SPINLOCK or DEBUG_LOCK_ALLOC enabled. This patch add support for dynamic allocation of split page table lock if we can't embed it to struct page. page->ptl is unsigned long now and we use it as spinlock_t if sizeof(spinlock_t) <= sizeof(long), otherwise it's pointer to spinlock_t. The spinlock_t allocated in pgtable_page_ctor() for PTE table and in pgtable_pmd_page_ctor() for PMD table. All other helpers converted to support dynamically allocated page->ptl. Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by: NPeter Zijlstra <peterz@infradead.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Kirill A. Shutemov 提交于
We're going to introduce split page table lock for PMD level. Let's rename existing split ptlock for PTE level to avoid confusion. Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com> Tested-by: NAlex Thorlton <athorlton@sgi.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: "Eric W . Biederman" <ebiederm@xmission.com> Cc: "Paul E . McKenney" <paulmck@linux.vnet.ibm.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Dave Jones <davej@redhat.com> Cc: David Howells <dhowells@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kees Cook <keescook@chromium.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Robin Holt <robinmholt@gmail.com> Cc: Sedat Dilek <sedat.dilek@gmail.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 10 10月, 2013 2 次提交
-
-
由 Stefano Stabellini 提交于
Use xen_alloc_coherent_pages and xen_free_coherent_pages to allocate or free coherent pages. We need to be careful handling the pointer returned by xen_alloc_coherent_pages, because on ARM the pointer is not equal to phys_to_virt(*dma_handle). In fact virt_to_phys only works for kernel direct mapped RAM memory. In ARM case the pointer could be an ioremap address, therefore passing it to virt_to_phys would give you another physical address that doesn't correspond to it. Make xen_create_contiguous_region take a phys_addr_t as start parameter to avoid the virt_to_phys calls which would be incorrect. Changes in v6: - remove extra spaces. Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
由 Stefano Stabellini 提交于
Modify xen_create_contiguous_region to return the dma address of the newly contiguous buffer. Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: NDavid Vrabel <david.vrabel@citrix.com> Changes in v4: - use virt_to_machine instead of virt_to_bus.
-
- 27 9月, 2013 1 次提交
-
-
由 Konrad Rzeszutek Wilk 提交于
Jan Beulich spotted that the PAT MSR settings in the Xen public document that "the first (PAT6) column was wrong across the board, and the column for PAT7 was missing altogether." This updates it to be in sync. CC: Jan Beulich <jbeulich@suse.com> Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by: NJan Beulich <jbeulich@suse.com>
-
- 12 4月, 2013 1 次提交
-
-
由 Kees Cook 提交于
Make a copy of the IDT (as seen via the "sidt" instruction) read-only. This primarily removes the IDT from being a target for arbitrary memory write attacks, and has the added benefit of also not leaking the kernel base offset, if it has been relocated. We already did this on vendor == Intel and family == 5 because of the F0 0F bug -- regardless of if a particular CPU had the F0 0F bug or not. Since the workaround was so cheap, there simply was no reason to be very specific. This patch extends the readonly alias to all CPUs, but does not activate the #PF to #UD conversion code needed to deliver the proper exception in the F0 0F case except on Intel family 5 processors. Signed-off-by: NKees Cook <keescook@chromium.org> Link: http://lkml.kernel.org/r/20130410192422.GA17344@www.outflux.net Cc: Eric Northup <digitaleric@google.com> Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
- 11 4月, 2013 1 次提交
-
-
由 Boris Ostrovsky 提交于
Invoking arch_flush_lazy_mmu_mode() results in calls to preempt_enable()/disable() which may have performance impact. Since lazy MMU is not used on bare metal we can patch away arch_flush_lazy_mmu_mode() so that it is never called in such environment. [ hpa: the previous patch "Fix vmalloc_fault oops during lazy MMU updates" may cause a minor performance regression on bare metal. This patch resolves that performance regression. It is somewhat unclear to me if this is a good -stable candidate. ] Signed-off-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com> Link: http://lkml.kernel.org/r/1364045796-10720-2-git-send-email-konrad.wilk@oracle.comTested-by: NJosh Boyer <jwboyer@redhat.com> Tested-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by: NBorislav Petkov <bp@suse.de> Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com> Cc: <stable@vger.kernel.org> SEE NOTE ABOVE
-
- 03 4月, 2013 1 次提交
-
-
由 Konrad Rzeszutek Wilk 提交于
Occassionaly on a DL380 G4 the guest would crash quite early with this: (XEN) d244:v0: unhandled page fault (ec=0003) (XEN) Pagetable walk from ffffffff84dc7000: (XEN) L4[0x1ff] = 00000000c3f18067 0000000000001789 (XEN) L3[0x1fe] = 00000000c3f14067 000000000000178d (XEN) L2[0x026] = 00000000dc8b2067 0000000000004def (XEN) L1[0x1c7] = 00100000dc8da067 0000000000004dc7 (XEN) domain_crash_sync called from entry.S (XEN) Domain 244 (vcpu#0) crashed on cpu#3: (XEN) ----[ Xen-4.1.3OVM x86_64 debug=n Not tainted ]---- (XEN) CPU: 3 (XEN) RIP: e033:[<ffffffff81263f22>] (XEN) RFLAGS: 0000000000000216 EM: 1 CONTEXT: pv guest (XEN) rax: 0000000000000000 rbx: ffffffff81785f88 rcx: 000000000000003f (XEN) rdx: 0000000000000000 rsi: 00000000dc8da063 rdi: ffffffff84dc7000 The offending code shows it to be a loop writting the value zero (%rax) in the %rdi (the L4 provided by Xen) register: 0: 44 00 00 add %r8b,(%rax) 3: 31 c0 xor %eax,%eax 5: b9 40 00 00 00 mov $0x40,%ecx a: 66 0f 1f 84 00 00 00 nopw 0x0(%rax,%rax,1) 11: 00 00 13: ff c9 dec %ecx 15:* 48 89 07 mov %rax,(%rdi) <-- trapping instruction 18: 48 89 47 08 mov %rax,0x8(%rdi) 1c: 48 89 47 10 mov %rax,0x10(%rdi) which fails. xen_setup_kernel_pagetable recycles some of the Xen's page-table entries when it has switched over to its Linux page-tables. Right before try to clear the page, we make a hypercall to change it from _RO to _RW and that works (otherwise we would hit an BUG()). And the _RW flag is set for that page: (XEN) L1[0x1c7] = 001000004885f067 0000000000004dc7 The error code is 3, so PFEC_page_present and PFEC_write_access, so page is present (correct), and we tried to write to the page, but a violation occurred. The one theory is that the the page entries in hardware (which are cached) are not up to date with what we just set. Especially as we have just done an CR3 write and flushed the multicalls. This patch does solve the problem by flusing out the TLB page entry after changing it from _RO to _RW and we don't hit this issue anymore. Fixed-Oracle-Bug: 16243091 [ON OCCASIONS VM START GOES INTO 'CRASH' STATE: CLEAR_PAGE+0X12 ON HP DL380 G4] Reported-and-Tested-by: NSaar Maoz <Saar.Maoz@oracle.com> Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
- 28 3月, 2013 1 次提交
-
-
由 Konrad Rzeszutek Wilk 提交于
We move the setting of write_cr3 from the early bootup variant (see git commit 0cc9129d "x86-64, xen, mmu: Provide an early version of write_cr3.") to a more appropiate location. This new location sets all of the other non-early variants of pvops calls - and most importantly is before the alternative_asm mechanism kicks in. Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
- 23 2月, 2013 1 次提交
-
-
由 Konrad Rzeszutek Wilk 提交于
With commit 8170e6be ("x86, 64bit: Use a #PF handler to materialize early mappings on demand") we started hitting an early bootup crash where the Xen hypervisor would inform us that: (XEN) d7:v0: unhandled page fault (ec=0000) (XEN) Pagetable walk from ffffea000005b2d0: (XEN) L4[0x1d4] = 0000000000000000 ffffffffffffffff (XEN) domain_crash_sync called from entry.S (XEN) Domain 7 (vcpu#0) crashed on cpu#3: (XEN) ----[ Xen-4.2.0 x86_64 debug=n Not tainted ]---- .. that Xen was unable to context switch back to dom0. Looking at the calling stack we find: [<ffffffff8103feba>] xen_get_user_pgd+0x5a <-- [<ffffffff8103feba>] xen_get_user_pgd+0x5a [<ffffffff81042d27>] xen_write_cr3+0x77 [<ffffffff81ad2d21>] init_mem_mapping+0x1f9 [<ffffffff81ac293f>] setup_arch+0x742 [<ffffffff81666d71>] printk+0x48 We are trying to figure out whether we need to up-date the user PGD as well. Please keep in mind that under 64-bit PV guests we have a limited amount of rings: 0 for the Hypervisor, and 1 for both the Linux kernel and user-space. As such the Linux pvops'fied version of write_cr3 checks if it has to update the user-space cr3 as well. That clearly is not needed during early bootup. The recent changes (see above git commit) streamline the x86 page table allocation to be much simpler (And also incidentally the #PF handler ends up in spirit being similar to how the Xen toolstack sets up the initial page-tables). The fix is to have an early-bootup version of cr3 that just loads the kernel %cr3. The later version - which also handles user-page modifications will be used after the initial page tables have been setup. [ hpa: removed a redundant #ifdef and made the new function __init. Also note that x86-32 already has such an early xen_write_cr3. ] Tested-by: N"H. Peter Anvin" <hpa@zytor.com> Reported-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com> Link: http://lkml.kernel.org/r/1361579812-23709-1-git-send-email-konrad.wilk@oracle.comSigned-off-by: NH. Peter Anvin <hpa@zytor.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 29 11月, 2012 2 次提交
-
-
由 Ian Campbell 提交于
For Xen on ARM a PFN is 64 bits so we need to use the appropriate type here. Signed-off-by: NIan Campbell <ian.campbell@citrix.com> Acked-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com> [v2: include the necessary header, Reported-by: Fengguang Wu <fengguang.wu@intel.com> ]
-
由 Ian Campbell 提交于
Also introduce xen_unmap_domain_mfn_range. These are the parts of Mukesh's "xen/pvh: Implement MMU changes for PVH" which are also needed as a baseline for ARM privcmd support. The original patch was: Signed-off-by: NMukesh Rathor <mukesh.rathor@oracle.com> Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com> This derivative is also: Signed-off-by: NIan Campbell <ian.campbell@citrix.com>
-
- 18 11月, 2012 1 次提交
-
-
由 Yinghai Lu 提交于
Page table area are pre-mapped now after x86, mm: setup page table in top-down x86, mm: Remove early_memremap workaround for page table accessing on 64bit mapping_pagetable_reserve is not used anymore, so remove it. Also remove operation in mask_rw_pte(), as modified allow_low_page always return pages that are already mapped, moreover xen_alloc_pte_init, xen_alloc_pmd_init, etc, will mark the page RO before hooking it into the pagetable automatically. -v2: add changelog about mask_rw_pte() from Stefano. Signed-off-by: NYinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1353123563-3103-27-git-send-email-yinghai@kernel.org Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
- 01 11月, 2012 1 次提交
-
-
由 Konrad Rzeszutek Wilk 提交于
As Mukesh explained it, the MMUEXT_TLB_FLUSH_ALL allows the hypervisor to do a TLB flush on all active vCPUs. If instead we were using the generic one (which ends up being xen_flush_tlb) we end up making the MMUEXT_TLB_FLUSH_LOCAL hypercall. But before we make that hypercall the kernel will IPI all of the vCPUs (even those that were asleep from the hypervisor perspective). The end result is that we needlessly wake them up and do a TLB flush when we can just let the hypervisor do it correctly. This patch gives around 50% speed improvement when migrating idle guest's from one host to another. Oracle-bug: 14630170 CC: stable@vger.kernel.org Tested-by: NJingjie Jiang <jingjie.jiang@oracle.com> Suggested-by: NMukesh Rathor <mukesh.rathor@oracle.com> Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
- 09 10月, 2012 1 次提交
-
-
由 Konstantin Khlebnikov 提交于
A long time ago, in v2.4, VM_RESERVED kept swapout process off VMA, currently it lost original meaning but still has some effects: | effect | alternative flags -+------------------------+--------------------------------------------- 1| account as reserved_vm | VM_IO 2| skip in core dump | VM_IO, VM_DONTDUMP 3| do not merge or expand | VM_IO, VM_DONTEXPAND, VM_HUGETLB, VM_PFNMAP 4| do not mlock | VM_IO, VM_DONTEXPAND, VM_HUGETLB, VM_PFNMAP This patch removes reserved_vm counter from mm_struct. Seems like nobody cares about it, it does not exported into userspace directly, it only reduces total_vm showed in proc. Thus VM_RESERVED can be replaced with VM_IO or pair VM_DONTEXPAND | VM_DONTDUMP. remap_pfn_range() and io_remap_pfn_range() set VM_IO|VM_DONTEXPAND|VM_DONTDUMP. remap_vmalloc_range() set VM_DONTEXPAND | VM_DONTDUMP. [akpm@linux-foundation.org: drivers/vfio/pci/vfio_pci.c fixup] Signed-off-by: NKonstantin Khlebnikov <khlebnikov@openvz.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Carsten Otte <cotte@de.ibm.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Eric Paris <eparis@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Morris <james.l.morris@oracle.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Kentaro Takeda <takedakn@nttdata.co.jp> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Venkatesh Pallipadi <venki@google.com> Acked-by: NLinus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 04 10月, 2012 1 次提交
-
-
由 Olaf Hering 提交于
Register pfn_is_ram helper speed up reading /proc/vmcore in the kdump kernel. See commit message of 997c136f ("fs/proc/vmcore.c: add hook to read_from_oldmem() to check for non-ram pages") for details. It makes use of a new hvmop HVMOP_get_mem_type which was introduced in xen 4.2 (23298:26413986e6e0) and backported to 4.1.1. The new function is currently only enabled for reading /proc/vmcore. Later it will be used also for the kexec kernel. Since that requires more changes in the generic kernel make it static for the time being. Signed-off-by: NOlaf Hering <olaf@aepfle.de> Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
- 12 9月, 2012 4 次提交
-
-
由 Attilio Rao 提交于
At this stage x86_init.paging.pagetable_setup_done is only used in the XEN case. Move its content in the x86_init.paging.pagetable_init setup function and remove the now unused x86_init.paging.pagetable_setup_done remaining infrastructure. Signed-off-by: NAttilio Rao <attilio.rao@citrix.com> Acked-by: <konrad.wilk@oracle.com> Cc: <Ian.Campbell@citrix.com> Cc: <Stefano.Stabellini@eu.citrix.com> Cc: <xen-devel@lists.xensource.com> Link: http://lkml.kernel.org/r/1345580561-8506-5-git-send-email-attilio.rao@citrix.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Attilio Rao 提交于
Move the paging_init() call to the platform specific pagetable_init() function, so we can get rid of the extra pagetable_setup_done() function pointer. Signed-off-by: NAttilio Rao <attilio.rao@citrix.com> Acked-by: <konrad.wilk@oracle.com> Cc: <Ian.Campbell@citrix.com> Cc: <Stefano.Stabellini@eu.citrix.com> Cc: <xen-devel@lists.xensource.com> Link: http://lkml.kernel.org/r/1345580561-8506-4-git-send-email-attilio.rao@citrix.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Attilio Rao 提交于
In preparation for unifying the pagetable_setup_start() and pagetable_setup_done() setup functions, rename appropriately all the infrastructure related to pagetable_setup_start(). Signed-off-by: NAttilio Rao <attilio.rao@citrix.com> Ackedd-by: <konrad.wilk@oracle.com> Cc: <Ian.Campbell@citrix.com> Cc: <Stefano.Stabellini@eu.citrix.com> Cc: <xen-devel@lists.xensource.com> Link: http://lkml.kernel.org/r/1345580561-8506-3-git-send-email-attilio.rao@citrix.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Attilio Rao 提交于
We either use swapper_pg_dir or the argument is unused. Preparatory patch to simplify platform pagetable setup further. Signed-off-by: NAttilio Rao <attilio.rao@citrix.com> Ackedb-by: <konrad.wilk@oracle.com> Cc: <Ian.Campbell@citrix.com> Cc: <Stefano.Stabellini@eu.citrix.com> Cc: <xen-devel@lists.xensource.com> Link: http://lkml.kernel.org/r/1345580561-8506-2-git-send-email-attilio.rao@citrix.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 06 9月, 2012 1 次提交
-
-
由 David Vrabel 提交于
Callers of xen_remap_domain_range() need to know if the remap failed because frame is currently paged out. So they can retry the remap later on. Return -ENOENT in this case. This assumes that the error codes returned by Xen are a subset of those used by the kernel. It is unclear if this is defined as part of the hypercall ABI. Acked-by: NAndres Lagar-Cavilla <andres@lagarcavilla.org> Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com> Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
- 05 9月, 2012 1 次提交
-
-
由 Alex Shi 提交于
While TLB_FLUSH_ALL gets passed as 'end' argument to flush_tlb_others(), the Xen code was made to check its 'start' parameter. That may give a incorrect op.cmd to MMUEXT_INVLPG_MULTI instead of MMUEXT_TLB_FLUSH_MULTI. Then it causes some page can not be flushed from TLB. This patch fixed this issue. Reported-by: NJan Beulich <jbeulich@suse.com> Signed-off-by: NAlex Shi <alex.shi@intel.com> Acked-by: NJan Beulich <jbeulich@suse.com> Tested-by: NYongjie Ren <yongjie.ren@intel.com> Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
- 23 8月, 2012 7 次提交
-
-
由 Konrad Rzeszutek Wilk 提交于
If the P2M revectoring would fail, we would try to continue on by cleaning the PMD for L1 (PTE) page-tables. The xen_cleanhighmap is greedy and erases the PMD on both boundaries. Since the P2M array can share the PMD, we would wipe out part of the __ka that is still used in the P2M tree to point to P2M leafs. This fixes it by bypassing the revectoring and continuing on. If the revector fails, a nice WARN is printed so we can still troubleshoot this. Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
由 Konrad Rzeszutek Wilk 提交于
We call memblock_reserve for [start of mfn list] -> [PMD aligned end of mfn list] instead of <start of mfn list> -> <page aligned end of mfn list]. This has the disastrous effect that if at bootup the end of mfn_list is not PMD aligned we end up returning to memblock parts of the region past the mfn_list array. And those parts are the PTE tables with the disastrous effect of seeing this at bootup: Write protecting the kernel read-only data: 10240k Freeing unused kernel memory: 1860k freed Freeing unused kernel memory: 200k freed (XEN) mm.c:2429:d0 Bad type (saw 1400000000000002 != exp 7000000000000000) for mfn 116a80 (pfn 14e26) ... (XEN) mm.c:908:d0 Error getting mfn 116a83 (pfn 14e2a) from L1 entry 8000000116a83067 for l1e_owner=0, pg_owner=0 (XEN) mm.c:908:d0 Error getting mfn 4040 (pfn 5555555555555555) from L1 entry 0000000004040601 for l1e_owner=0, pg_owner=0 .. and so on. Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
由 Konrad Rzeszutek Wilk 提交于
Please first read the description in "xen/mmu: Copy and revector the P2M tree." At this stage, the __ka address space (which is what the old P2M tree was using) is partially disassembled. The cleanup_highmap has removed the PMD entries from 0-16MB and anything past _brk_end up to the max_pfn_mapped (which is the end of the ramdisk). The xen_remove_p2m_tree and code around has ripped out the __ka for the old P2M array. Here we continue on doing it to where the Xen page-tables were. It is safe to do it, as the page-tables are addressed using __va. For good measure we delete anything that is within MODULES_VADDR and up to the end of the PMD. At this point the __ka only contains PMD entries for the start of the kernel up to __brk. [v1: Per Stefano's suggestion wrapped the MODULES_VADDR in debug] Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
由 Konrad Rzeszutek Wilk 提交于
Please first read the description in "xen/p2m: Add logic to revector a P2M tree to use __va leafs" patch. The 'xen_revector_p2m_tree()' function allocates a new P2M tree copies the contents of the old one in it, and returns the new one. At this stage, the __ka address space (which is what the old P2M tree was using) is partially disassembled. The cleanup_highmap has removed the PMD entries from 0-16MB and anything past _brk_end up to the max_pfn_mapped (which is the end of the ramdisk). We have revectored the P2M tree (and the one for save/restore as well) to use new shiny __va address to new MFNs. The xen_start_info has been taken care of already in 'xen_setup_kernel_pagetable()' and xen_start_info->shared_info in 'xen_setup_shared_info()', so we are free to roam and delete PMD entries - which is exactly what we are going to do. We rip out the __ka for the old P2M array. [v1: Fix smatch warnings] [v2: memset was doing 0 instead of 0xff] Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
由 Konrad Rzeszutek Wilk 提交于
As we are not using them. We end up only using the L1 pagetables and grafting those to our page-tables. [v1: Per Stefano's suggestion squashed two commits] [v2: Per Stefano's suggestion simplified loop] [v3: Fix smatch warnings] [v4: Add more comments] Acked-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
由 Konrad Rzeszutek Wilk 提交于
B/c we do not need it. During the startup the Xen provides us with all the initial memory mapped that we need to function. The initial memory mapped is up to the bootstack, which means we can reference using __ka up to 4.f): (from xen/interface/xen.h): 4. This the order of bootstrap elements in the initial virtual region: a. relocated kernel image b. initial ram disk [mod_start, mod_len] c. list of allocated page frames [mfn_list, nr_pages] d. start_info_t structure [register ESI (x86)] e. bootstrap page tables [pt_base, CR3 (x86)] f. bootstrap stack [register ESP (x86)] (initial ram disk may be ommitted). [v1: More comments in git commit] Acked-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
由 Konrad Rzeszutek Wilk 提交于
After all, this is what it is there for. Acked-by: NJan Beulich <jbeulich@suse.com> Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-