- 19 7月, 2011 2 次提交
-
-
由 WANG Cong 提交于
`make headers_check` complains that linux-2.6/usr/include/linux/sdla.h:116: userspace cannot reference function or variable defined in the kernel this is due to that there is no such a kernel function, void sdla(void *cfg_info, char *dev, struct frad_conf *conf, int quiet); I don't know why we have it in a kernel header, so remove it. Signed-off-by: NWANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
Commit 726b65ad ("tulip: Convert uses of KERN_DEBUG") enabled some old previously inactive uses of pr_debug converted by commit dde7c8ef ("tulip/dmfe.c: Use dev_<level> and pr_<level>"). Remove these pr_debugs. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 7月, 2011 8 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: [CIFS] update cifs to version 1.74 [CIFS] update limit for snprintf in cifs_construct_tcon cifs: Fix signing failure when server mandates signing for NTLMSSP
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: Bluetooth: Fix crash with incoming L2CAP connections Bluetooth: Fix regression in L2CAP connection procedure gianfar: rx parser r6040: only disable RX interrupt if napi_schedule_prep is successful net: remove NETIF_F_ALL_TX_OFFLOADS net: sctp: fix checksum marking for outgoing packets
-
git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: watchdog: hpwdt depends on PCI watchdog: fix hpwdt Kconfig regression in 3.0-rc
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6由 Linus Torvalds 提交于
* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: [media] tuner-core: fix a 2.6.39 regression with mt20xx [media] dvb_frontend: fix race condition in stopping/starting frontend [media] media: fix radio-sf16fmr2 build when SND is not enabled [media] MEDIA: Fix non-ISA_DMA_API link failure of sound code [media] nuvoton-cir: make idle timeout more sane [media] mceusb: increase default timeout to 100ms [media] mceusb: Timeout unit corrections [media] Revert "V4L/DVB: cx23885: Enable Message Signaled Interrupts(MSI)"
-
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6由 Linus Torvalds 提交于
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: ACPI: Fixes device power states array overflow ACPI, APEI, HEST, Detect duplicated hardware error source ID ACPI: Fix lockdep false positives in acpi_power_off()
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6由 Linus Torvalds 提交于
* 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6: PM / MIPS: Convert i8259.c to using syscore_ops
-
由 Linus Torvalds 提交于
Merge branch 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung * 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: SAMSUNG: DMA Cleanup as per sparse ARM: SAMSUNG: Check NULL return from irq_alloc_generic_chip
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sparc: sun4m SMP: fix wrong shift instruction in IPI handler sparc32,leon: Added __init declaration to leon_flush_needed() sparc/irqs: Do not trace arch_local_{*,irq_*} functions
-
- 17 7月, 2011 4 次提交
-
-
由 Randy Dunlap 提交于
hpwdt is a PCI driver so it should depend on PCI. Fixes these build errors: drivers/watchdog/hpwdt.c:762: error: implicit declaration of function 'pci_iomap' drivers/watchdog/hpwdt.c:762: warning: assignment makes pointer from integer without a cast drivers/watchdog/hpwdt.c:797: error: implicit declaration of function 'pci_iounmap' Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Signed-off-by: NWim Van Sebroeck <wim@iguana.be> Cc: Thomas Mingarelli <thomas.mingarelli@hp.com>
-
由 Will Simoneau 提交于
This shift instruction appears to be shifting in the wrong direction. Without this change, my SparcStation-20MP hangs just after bringing up the second CPU: Entering SMP Mode... Starting CPU 2 at f02b4e90 Brought up 2 CPUs Total of 2 processors activated (99.52 BogoMIPS). *** stuck *** Signed-off-by: NWill Simoneau <simoneau@ele.uri.edu> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilia Kolomisnky 提交于
Another regression fix considering incomming l2cap connections with defer_setup enabled. In situations when incomming connection is extracted with l2cap_sock_accept, it's bt_sock info will have 'parent' member zerroed, but 'parent' may be used unconditionally in l2cap_conn_start() and l2cap_security_cfm() when defer_setup is enabled. Backtrace: [<bf02d5ac>] (l2cap_security_cfm+0x0/0x2ac [bluetooth]) from [<bf01f01c>] (hci_event_pac ket+0xc2c/0x4aa4 [bluetooth]) [<bf01e3f0>] (hci_event_packet+0x0/0x4aa4 [bluetooth]) from [<bf01a844>] (hci_rx_task+0x cc/0x27c [bluetooth]) [<bf01a778>] (hci_rx_task+0x0/0x27c [bluetooth]) from [<c008eee4>] (tasklet_action+0xa0/ 0x15c) [<c008ee44>] (tasklet_action+0x0/0x15c) from [<c008f38c>] (__do_softirq+0x98/0x130) r7:00000101 r6:00000018 r5:00000001 r4:efc46000 [<c008f2f4>] (__do_softirq+0x0/0x130) from [<c008f524>] (do_softirq+0x4c/0x58) [<c008f4d8>] (do_softirq+0x0/0x58) from [<c008f5e0>] (run_ksoftirqd+0xb0/0x1b4) r4:efc46000 r3:00000001 [<c008f530>] (run_ksoftirqd+0x0/0x1b4) from [<c009f2a8>] (kthread+0x84/0x8c) r7:00000000 r6:c008f530 r5:efc47fc4 r4:efc41f08 [<c009f224>] (kthread+0x0/0x8c) from [<c008cc84>] (do_exit+0x0/0x5f0) Signed-off-by: NIlia Kolomisnky <iliak@ti.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Gustavo F. Padovan 提交于
Caused by the following commit, partially revert it. commit 9fa7e4f7 Author: Gustavo F. Padovan <padovan@profusion.mobi> Date: Thu Jun 30 16:11:30 2011 -0300 Bluetooth: Fix regression with incoming L2CAP connections PTS test A2DP/SRC/SRC_SET/TC_SRC_SET_BV_02_I revealed that ( probably after the df3c3931 commit ) the l2cap connection could not be established in case when the "Auth Complete" HCI event does not arive before the initiator send "Configuration request", in which case l2cap replies with "Command rejected" since the channel is still in BT_CONNECT2 state. Signed-off-by: NLuiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 7月, 2011 14 次提交
-
-
由 Sangwook Lee 提交于
Function declaration differs between file: dma.c and file:dma.h and SPARSE (Documentation/sparse.txt) gives error messages All dma channels are members of 'enum dma_ch' and not 'unsigned int' Please have a look at channel definitions in: arch/arm/mach-s3c64xx/include/mach/dma.h arch/arm/plat-samsung/include/plat/s3c-dma-pl330.h arch/arm/mach-s3c2410/include/mach/dma.h So all arguments should be of type 'enum dma_ch' Signed-off-by: NSangwook Lee <sangwook.lee@linaro.org> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Olaf Hering 提交于
Remove Kconfig regression caused by commit a4616153 "watchdog: hpwdt: build hpwdt as module by default with NMI_DECODING enabled" With the above change applied, hpwdt will be enabled unconditionally by just entering the Watchdog subscreen in menuconfig. Since this driver is not essential to boot any box it should remain disabled until it gets manually enabled, just like all other drivers. Signed-off-by: NOlaf Hering <olaf@aepfle.de> Cc: Tony Camuso <tcamuso@redhat.com> Signed-off-by: NWim Van Sebroeck <wim@iguana.be> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
-
由 Todd Poynor 提交于
Signed-off-by: NTodd Poynor <toddpoynor@google.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
git://git.secretlab.ca/git/linux-2.6由 Linus Torvalds 提交于
* 'gpio/merge' of git://git.secretlab.ca/git/linux-2.6: gpio: wm831x: add a missing break in wm831x_gpio_dbg_show
-
由 Richard Cochran 提交于
Commit 234b6ced clocksource: convert ARM 32-bit up counting clocksources broke the build for ixp4xx and made big endian operation impossible. This commit restores the original behaviour. Signed-off-by: NRichard Cochran <richard.cochran@omicron.at> Signed-off-by: NKrzysztof Hałasa <khc@pm.waw.pl> [ Thomas says that we might want to have generic BE accessor functions to the MMIO clock source, but that hasn't happened yet, so in the meantime this seems to be the short-term fix for the particular problem - Linus ] Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Sebastian Pöhn 提交于
Only let the rx parser be enabled if it is necessary (if VLAN extraction, IP or TCP checksumming or the rx queue filer are enabled). Otherwise disable it. The new routine gfar_check_rx_parser_mode should be run after every change on this features and will enable/disable the parser as necessary. Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NSebastian Poehn <sebastian.poehn@belden.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rafael J. Wysocki 提交于
The code in arch/mips/kernel/i8259.c still hasn't been converted to using struct syscore_ops instead of a sysdev for resume and shutdown. As a result, this code doesn't build any more after suspend, resume and shutdown callbacks have been removed from struct sysdev_class. Fix this problem by converting i8259.c to using syscore_ops. Reported-and-tested-by: NRoland Vossen <rvossen@broadcom.com> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Acked-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Axel Lin 提交于
Signed-off-by: NAxel Lin <axel.lin@gmail.com> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2: nilfs2: remove resize from unsupported features list
-
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging由 Linus Torvalds 提交于
* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging: hwmon: (adm1275) Fix coefficients per datasheet revision B hwmon: (pmbus) Use long variables for register to data conversions
-
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6由 Linus Torvalds 提交于
* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/radeon/kms: add new NI pci ids
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: fix loop checks in d_materialise_unique() Fix ->d_lock locking order in unlazy_walk()
-
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-2.6-rcu由 Linus Torvalds 提交于
* 'rcu/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-2.6-rcu: rcu: Prevent RCU callbacks from executing before scheduler initialized
-
由 Peter Zijlstra 提交于
Commit 3fe1698b ("sched: Deal with non-atomic min_vruntime reads on 32bit") forgot to initialize min_vruntime_copy which could lead to an infinite while loop in task_waking_fair() under some circumstances (early boot, lucky timing). [ This bug was also reported by others that blamed it on the RCU initialization problems ] Reported-and-tested-by: NBruno Wolff III <bruno@wolff.to> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Reviewed-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 15 7月, 2011 7 次提交
-
-
由 Alex Deucher 提交于
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@kernel.org Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Michael Thalmeier 提交于
When receiving the first RX interrupt before the internal call to napi_schedule_prep is successful the RX interrupt gets disabled and is never enabled again as the poll function never gets executed. Signed-off-by: NMichael Thalmeier <Michael.Thalmeier@sigmatek.at> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Guenter Roeck 提交于
Coefficients to convert chip register values to voltage/current have been slightly changed in revision B of the chip datasheet. Update driver coefficients to match the coefficients in the datasheet. Signed-off-by: NGuenter Roeck <guenter.roeck@ericsson.com> Acked-by: NJean Delvare <khali@linux-fr.org>
-
由 Al Viro 提交于
Both __d_unalias() and __d_materialise_dentry() need loop prevention. Grab rename_lock in caller, check for loops there... As a side benefit, we have dentry_lock_for_move() called only under rename_lock, which seriously reduces deadlock potential of the execrable "locking order" used for ->d_lock. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Michał Mirosław 提交于
There is no software fallback implemented for SCTP or FCoE checksumming, and so it should not be passed on by software devices like bridge or bonding. For VLAN devices, this is different. First, the driver for underlying device should be prepared to get offloaded packets even when the feature is disabled (especially if it advertises it in vlan_features). Second, devices under VLANs do not get replaced without tearing down the VLAN first. This fixes a mess I accidentally introduced while converting bonding to ndo_fix_features. NETIF_F_SOFT_FEATURES are removed from BOND_VLAN_FEATURES because they are unused as of commit 712ae51a. Signed-off-by: NMichał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michał Mirosław 提交于
Packets to devices without NETIF_F_SCTP_CSUM (including NETIF_F_NO_CSUM) should be properly checksummed because the packets can be diverted or rerouted after construction. This still leaves packets diverted from NETIF_F_SCTP_CSUM-enabled devices with broken checksums. Fixing this needs implementing software offload fallback in networking core. For users of sctp_checksum_disable, skb->ip_summed should be left as CHECKSUM_NONE and not CHECKSUM_UNNECESSARY as per include/linux/skbuff.h. Signed-off-by: NMichał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes: GFS2: Resolve inode eviction and ail list interaction bug GFS2: Fix race during filesystem mount GFS2: force a log flush when invalidating the rindex glock
-
- 14 7月, 2011 5 次提交
-
-
由 Steven Whitehouse 提交于
This patch contains a few misc fixes which resolve a recently reported issue. This patch has been a real team effort and has received a lot of testing. The first issue is that the ail lock needs to be held over a few more operations. The lock thats added into gfs2_releasepage() may possibly be a candidate for replacing with RCU at some future point, but at this stage we've gone for the obvious fix. The second issue is that gfs2_write_inode() can end up calling a glock recursively when called from gfs2_evict_inode() via the syncing code, so it needs a guard added. The third issue is that we either need to not truncate the metadata pages of inodes which have zero link count, but which we cannot deallocate due to them still being in use by other nodes, or we need to ensure that those pages have all made it through the journal and ail lists first. This patch takes the former approach, but the latter has also been tested and there is nothing to choose between them performance-wise. So again, we could revise that decision in the future. Also, the inode eviction process is now better documented. Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com> Tested-by: NBob Peterson <rpeterso@redhat.com> Tested-by: NAbhijith Das <adas@redhat.com> Reported-by: NBarry J. Marson <bmarson@redhat.com> Reported-by: NDavid Teigland <teigland@redhat.com>
-
由 Len Brown 提交于
-
由 Lin Ming 提交于
Commit 28c2103d added new state ACPI_STATE_D3_COLD, so the device power states array must be expanded by one also. v2: Use ACPI_D_STATE_COUNT instead of number 5 for the array size. Reported-by: NDan Carpenter <error27@gmail.com> Suggested-by: NOldřich Jedlička <oldium.pro@seznam.cz> Signed-off-by: NLin Ming <ming.m.lin@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Huang Ying 提交于
The firmware on some machine will report duplicated hardware error source ID in HEST. This is considered a firmware bug. To provide better warning message, this patch adds duplicated hardware error source ID detecting and corresponding printk. This patch fixes #37412 on kernel bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=37412 Reported-by: marconifabio@ubuntu-it.org Signed-off-by: NHuang Ying <ying.huang@intel.com> Tested-by: NMathias <janedo.spam@gmail.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: mmc: core: Bus width testing needs to handle suspend/resume
-