The netburst PMU is way different from the "architectural
perfomance monitoring" specification that current CPUs use.
P4 uses a tuple of ESCR+CCCR+COUNTER MSR registers to handle
perfomance monitoring events.

A few implementational details:

1) We need a separate x86_pmu::hw_config helper in struct
   x86_pmu since register bit-fields are quite different from P6,
   Core and later cpu series.

2) For the same reason is a x86_pmu::schedule_events helper
   introduced.

3) hw_perf_event::config consists of packed ESCR+CCCR values.
   It's allowed since in reality both registers only use a half
   of their size. Of course before making a real write into a
   particular MSR we need to unpack the value and extend it to
   a proper size.

4) The tuple of packed ESCR+CCCR in hw_perf_event::config
   doesn't describe the memory address of ESCR MSR register
   so that we need to keep a mapping between these tuples
   used and available ESCR (various P4 events may use same
   ESCRs but not simultaneously), for this sake every active
   event has a per-cpu map of hw_perf_event::idx <--> ESCR
   addresses.

5) Since hw_perf_event::idx is an offset to counter/control register
   we need to lift X86_PMC_MAX_GENERIC up, otherwise kernel
   strips it down to 8 registers and event armed may never be turned
   off (ie the bit in active_mask is set but the loop never reaches
   this index to check), thanks to Peter Zijlstra

Restrictions:

 - No cascaded counters support (do we ever need them?)
 - No dependent events support (so PERF_COUNT_HW_INSTRUCTIONS
   doesn't work for now)
 - There are events with same counters which can't work simultaneously
   (need to use intersected ones due to broken counter 1)
 - No PERF_COUNT_HW_CACHE_ events yet

Todo:

 - Implement dependent events
 - Need proper hashing for event opcodes (no linear search, good for
   debugging stage but not in real loads)
 - Some events counted during a clock cycle -- need to set threshold
   for them and count every clock cycle just to get summary statistics
   (ie to behave the same way as other PMUs do)
 - Need to swicth to use event_constraints
 - To support RAW events we need to encode a global list of P4 events
   into p4_templates
 - Cache events need to be added

Event support status matrix:

 Event			status
 -----------------------------
 cycles			works
 cache-references	works
 cache-misses		works
 branch-misses		works
 bus-cycles		partially (does not work on 64bit cpu with HT enabled)
 instruction		doesnt work (needs dependent event [mop tagging])
 branches		doesnt work
Signed-off-by: NCyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: NLin Ming <ming.m.lin@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20100311165439.GB5129@lenovo>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

There is no concurrency on these variables, so don't use LOCK'ed ops.

As to the intel_pmu_handle_irq() status bit clean, nobody uses that so
remove it all together.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: paulus@samba.org
Cc: eranian@google.com
Cc: robert.richter@amd.com
Cc: fweisbec@gmail.com
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
LKML-Reference: <20100304140100.240023029@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Remove the hw_perf_event_*() hotplug hooks in favour of per PMU hotplug
notifiers. This has the advantage of reducing the static weak interface
as well as exposing all hotplug actions to the PMU.

Use this to fix x86 hotplug usage where we did things in ONLINE which
should have been done in UP_PREPARE or STARTING.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: paulus@samba.org
Cc: eranian@google.com
Cc: robert.richter@amd.com
Cc: fweisbec@gmail.com
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
LKML-Reference: <20100305154128.736225361@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Avoid kernels from exploding on AMD machines when they have any
lock debugging bits enabled.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Split amd,p6,intel into separate files so that we can easily deal with
CONFIG_CPU_SUP_* things, needed to make things build now that perf_event.c
relies on symbols from amd.c
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>