This unifies the 32-bit (ARCH=ppc and ARCH=powerpc) and 64-bit idle
loops.  It brings over the concept of having a ppc_md.power_save
function from 32-bit to ARCH=powerpc, which lets us get rid of
native_idle().  With this we will also be able to simplify the idle
handling for pSeries and cell.
Signed-off-by: NPaul Mackerras <paulus@samba.org>

A few symbols are exported twice, remove them from ppc_ksyms.c
Remove users of sys_ctrler in arch/ppc/

WARNING: vmlinux: duplicate symbol '__delay' previous definition was in vmlinux
WARNING: vmlinux: duplicate symbol '__up' previous definition was in vmlinux
WARNING: vmlinux: duplicate symbol '__down' previous definition was in vmlinux
WARNING: vmlinux: duplicate symbol '__down_interruptible' previous definition was in vmlinux
WARNING: vmlinux: duplicate symbol 'sys_ctrler' previous definition was in vmlinux
WARNING: vmlinux: duplicate symbol 'strncat' previous definition was in vmlinux
WARNING: vmlinux: duplicate symbol 'strncmp' previous definition was in vmlinux
WARNING: vmlinux: duplicate symbol 'strchr' previous definition was in vmlinux
WARNING: vmlinux: duplicate symbol 'strrchr' previous definition was in vmlinux
WARNING: vmlinux: duplicate symbol 'strnlen' previous definition was in vmlinux
WARNING: vmlinux: duplicate symbol 'strpbrk' previous definition was in vmlinux
WARNING: vmlinux: duplicate symbol 'memscan' previous definition was in vmlinux
WARNING: vmlinux: duplicate symbol 'strstr' previous definition was in vmlinux
Signed-off-by: NOlaf Hering <olh@suse.de>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This patch unifies udbg for both ppc32 and ppc64 when building the
merged achitecture. xmon now has a single "back end". The powermac udbg
stuff gets enriched with some ADB capabilities and btext output. In
addition, the early_init callback is now called on ppc32 as well,
approx. in the same order as ppc64 regarding device-tree manipulations.
The init sequences of ppc32 and ppc64 are getting closer, I'll unify
them in a later patch.

For now, you can force udbg to the scc using "sccdbg" or to btext using
"btextdbg" on powermacs. I'll implement a cleaner way of forcing udbg
output to something else than the autodetected OF output device in a
later patch.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Change the phys_mem_access_prot() function to take a pfn instead of an
address.  This allows mmap64() to work on /dev/mem for addresses above 4G
on 32-bit architectures.  We start with a pfn in mmap_mem(), so there's no
need to convert to an address; in fact, it's actively bad, since the
conversion can overflow when the address is above 4G.

Similarly fix the ppc32 page_is_ram() function to avoid a conversion to an
address by directly comparing to max_pfn.  Working with max_pfn instead of
high_memory fixes page_is_ram() to give the right answer for highmem pages.
Signed-off-by: NRoland Dreier <rolandd@cisco.com>
Cc: Anton Blanchard <anton@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This declares powersave_nap in system.h and makes it an int everywhere,
fixes typos for the maple platform, fixes a couple of places where
I missed removing the last two arguments from a message_pass function,
and makes ppc64 consistent with ppc32 in the type of the
pci_bridge.cfg_data field.
Signed-off-by: NPaul Mackerras <paulus@samba.org>

I have tweaked this patch slightly to handle an empty list
of pages to relocate passed to relocate_new_kernel.  And
I have added ppc_md.machine_crash_shutdown.  To keep up with
the changes in the generic kexec infrastructure.

From: Albert Herranz <albert_herranz@yahoo.es>

The following patch adds support for kexec on the ppc32 platform.

Non-OpenFirmware based platforms are likely to work directly without
additional changes on the kernel side.  The kexec-tools userland package
may need to be slightly updated, though.

For OpenFirmware based machines, additional work is still needed on the
kernel side before kexec support is ready.  Benjamin Herrenschmidt is
kindly working on that part.

In order for a ppc platform to use the kexec kernel services it must
implement some ppc_md hooks.  Otherwise, kexec will be explicitly disabled,
as suggested by benh.

There are 3+1 new ppc_md hooks that a platform supporting kexec may
implement.  Two of them are mandatory for kexec to work.  See
include/asm-ppc/machdep.h for details.

- machine_kexec_prepare(image)

  This function is called to make any arrangements to the image before it
  is loaded.

  This hook _MUST_ be provided by a platform in order to activate kexec
  support for that platform.  Otherwise, the platform is considered to not
  support kexec and the kexec_load system call will fail (that makes all
  existing platforms by default non-kexec'able).

- machine_kexec_cleanup(image)

  This function is called to make any cleanups on image after the loaded
  image data it is freed.  This hook is optional.  A platform may or may
  not provide this hook.

- machine_kexec(image)

  This function is called to perform the _actual_ kexec.  This hook
  _MUST_ be provided by a platform in order to activate kexec support for
  that platform.

  If a platform provides machine_kexec_prepare but forgets to provide
  machine_kexec, a kexec will fall back to a reboot.

  A ready-to-use machine_kexec_simple() generic function is provided to,
  hopefully, simplify kexec adoption for embedded platforms.  A platform
  may call this function from its specific machine_kexec hook, like this:

void myplatform_kexec(struct kimage *image)
{
        machine_kexec_simple(image);
}

- machine_shutdown()

  This function is called to perform any machine specific shutdowns, not
  already done by drivers.  This hook is optional.  A platform may or may
  not provide this hook.

An example (trimmed) platform specific module for a platform supporting
kexec through the existing machine_kexec_simple follows:

/* ... */

#ifdef CONFIG_KEXEC
int myplatform_kexec_prepare(struct kimage *image)
{
        /* here, we can place additional preparations
*/
        return 0; /* yes, we support kexec */
}

void myplatform_kexec(struct kimage *image)
{
        machine_kexec_simple(image);
}
#endif /* CONFIG_KEXEC */

/* ... */

void __init
platform_init(unsigned long r3, unsigned long r4,
unsigned long r5,
              unsigned long r6, unsigned long r7)
{

/* ... */

#ifdef CONFIG_KEXEC
        ppc_md.machine_kexec_prepare =
myplatform_kexec_prepare;
        ppc_md.machine_kexec         =
myplatform_kexec;
#endif /* CONFIG_KEXEC */

/* ... */

}

The kexec ppc kernel support has been heavily tested on the GameCube Linux
port, and, as reported in the fastboot mailing list, it has been tested too
on a Moto 82xx ppc by Rick Richardson.
Signed-off-by: NAlbert Herranz <albert_herranz@yahoo.es>
Signed-off-by: NEric Biederman <ebiederm@xmission.com>
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!