The IBM asm driver is using a kobject only for reference counting,
nothing else.  So switch it to use a kref instead, which is all that is
needed, and is much smaller.

Cc: Max Asböck <amax@us.ibm.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Removed duplicates defined elsewhere
Signed-off-by: NEmil Medve <Emilian.Medve@Freescale.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

struct class_device is going away, this converts the code to use struct
device instead.
Signed-off-by: NTony Jones <tonyj@suse.de>
Cc: Jan "Yenya" Kasprzak <kas@fi.muni.cz>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NTony Jones <tonyj@suse.de>
Cc: Alex Dubov <oakad@yahoo.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

struct class_device is going away, this converts the code to use struct
device instead.
Signed-off-by: NTony Jones <tonyj@suse.de>
Cc: Peter Osterlund <petero2@telia.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

struct class_device is going away, this converts the code to use struct
device instead.
Signed-off-by: NTony Jones <tonyj@suse.de>
Cc: Tim Waugh <tim@cyberelk.net>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

struct class_device is going away, this converts the code to use struct
device instead.
Signed-off-by: NTony Jones <tonyj@suse.de>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

struct class_device is going away, this converts the code to use struct
device instead.
Signed-off-by: NTony Jones <tonyj@suse.de>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

struct class_device is going away, this converts the code to use struct
device instead.
Signed-off-by: NTony Jones <tonyj@suse.de>
Cc: Joshua Thompson <funaho@jurai.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NTony Jones <tonyj@suse.de>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Acked-by: NKarsten Keil <kkeil@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NTony Jones <tonyj@suse.de>
Cc: Gadi Oxman <gadio@netvision.net.il>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NTony Jones <tonyj@suse.de>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Cc: Shannon Nelson <shannon.nelson@intel.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NTony Jones <tonyj@suse.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Sam Hopkins <sah@coraid.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch reorganizes the way suspend and resume notifications are
sent to drivers.  The major changes are that now the PM core acquires
every device semaphore before calling the methods, and calls to
device_add() during suspends will fail, while calls to device_del()
during suspends will block.

It also provides a way to safely remove a suspended device with the
help of the PM core, by using the device_pm_schedule_removal() callback
introduced specifically for this purpose, and updates two drivers (msr
and cpuid) that need to use it.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This is a driver to control the cardbus wireless data card that works on
3g networks.

Greg Kroah-Hartman <gregkh@suse.de> did the initial driver cleanup.
Thanks to Arnaud Patard <apatard@mandriva.com> for help with bugfixing.
Thanks to Alan Cox for a lot of tty fixes.
Thanks to Satyam Sharma <satyam@infradead.org> for fixing buildbreakage.
Thanks to Frank Seidel <fseidel@suse.de> for a lot of bugfixes and
rewriting to make it a sane Linux driver
Thanks to Jiri Slaby <jirislaby@gmail.com> for a lot bugfixes, cleanups
and rewrites that make it much more readable.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NFrank Seidel <fseidel@suse.de>
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>

Before transmission of the last word in PIO RX_ONLY mode rx+tx mode
is enabled:

	/* prevent last RX_ONLY read from triggering
	 * more word i/o: switch to rx+tx
	 */
	if (c == 0 && tx == NULL)
		mcspi_write_cs_reg(spi,
				OMAP2_MCSPI_CHCONF0, l);

But because c is decremented after the test, c will never be zero and
rx+tx will not be enabled. This breaks RX_ONLY mode PIO transfers.

Fix it by decrementing c in the beginning of the various I/O loops.
Signed-off-by: NKalle Valo <kalle.valo@nokia.com>
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This reverts commit 93ad7c07.

http://bugzilla.kernel.org/show_bug.cgi?id=9798Signed-off-by: NLen Brown <len.brown@intel.com>

The "DEBUG" symbol needs to be defined before #including <linux/kernel.h> to
get the pr_debug() working.
Signed-off-by: NMárton Németh <nm127@freemail.hu>
Signed-off-by: NLen Brown <len.brown@intel.com>

Add leading zeros to pr_debug() calls. For example if x=0x0a, the format
"0x%2x" will result the string "0x a", the format "0x%2.2x" will result "0x0a".
Signed-off-by: NMárton Németh <nm127@freemail.hu>
Signed-off-by: NLen Brown <len.brown@intel.com>

Return OBF_1 optimization workaround

http://bugzilla.kernel.org/show_bug.cgi?id=8459Signed-off-by: NAlexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: NLen Brown <len.brown@intel.com>

This DMI blacklist reduces the console messages
on systems which have a BIOS that invokes OSI(Linux).

As the DMI blacklist already knows about these systems,
the request for DMI info itself is disabled.

Further, if OSI(Linux) has already been determined
to have no beneift, we disable the console message
requesting acpi_osi=Linux test results.
Signed-off-by: NLen Brown <len.brown@intel.com>

acpi_osi=Linux helps sound on these systems.
Signed-off-by: NLen Brown <len.brown@intel.com>

If BIOS invokes _OSI(Linux), the kernel response
depends on what the ACPI DMI list knows about the system,
and that is reflectd in dmesg:

1) System unknown to DMI:

ACPI: BIOS _OSI(Linux) query ignored
ACPI: DMI System Vendor: LENOVO
ACPI: DMI Product Name: 7661W1P
ACPI: DMI Product Version: ThinkPad T61
ACPI: DMI Board Name: 7661W1P
ACPI: DMI BIOS Vendor: LENOVO
ACPI: DMI BIOS Date: 10/18/2007
ACPI: Please send DMI info above to linux-acpi@vger.kernel.org
ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@vger.kernel.org

2) System known to DMI, but effect of OSI(Linux) unknown:

ACPI: DMI detected: Lenovo ThinkPad T61
...
ACPI: BIOS _OSI(Linux) query ignored via DMI
ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@vger.kernel.org

3) System known to DMI, which disables _OSI(Linux):

ACPI: DMI detected: Lenovo ThinkPad T61
...
ACPI: BIOS _OSI(Linux) query ignored via DMI

4) System known to DMI, which enable _OSI(Linux):

ACPI: DMI detected: Lenovo ThinkPad T61
ACPI: Added _OSI(Linux)
...
ACPI: BIOS _OSI(Linux) query honored via DMI

cmdline overrides take precidence over the built-in
default and the DMI prescribed default.
cmdline "acpi_osi=Linux" results in:

ACPI: BIOS _OSI(Linux) query honored via cmdline
Signed-off-by: NLen Brown <len.brown@intel.com>

Linux does not want BIOS writers to invoke _OSI(Linux) -
for in the field it causes more Windows incompatibility problems
than it solves.

So when it is seen in the BIOS for an Intel Customer Reference Board,
Linux should ignore its effect by default, and should complain loudly.
Otherwise, the reference BIOS will go unfixed, and the bad BIOS
will spread to the field.

Users of this board can get the old behavior with "acpi_osi=Linux"

As this was the only entry, delete acpi_osl_dmi_table[].
Signed-off-by: NLen Brown <len.brown@intel.com>

Signed-off-by: NLen Brown <len.brown@intel.com>

A utility routine to print common entries used
for ACPI-related DMI blacklist entries.
Signed-off-by: NLen Brown <len.brown@intel.com>

This simply allows other sub-systems (such as ACPI)
to access and print out slots in static dmi_ident[].
Signed-off-by: NLen Brown <len.brown@intel.com>

Signed-off-by: NLen Brown <len.brown@intel.com>

E7221 chipset is a server version of the i915.
Signed-off-by: NDave Airlie <airlied@linux.ie>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The E7221 chipset is a 915 rebadged for the Intel server line.
Signed-off-by: NDave Airlie <airlied@linux.ie>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

I've verified (on my Initio 9100 with a DAT drive) that the
2.6.24-rc8-git6 initio module still hangs on loading.

These fixes (other than the printk) are needed to get the module to load
ok (and work correctly) with my adapter & tape drive.

a) printk cosmetic fix

b) cblk->sglen needs setting for later DMA I/O routines to use

c) host->bios_addr needs setting for debug output correctness

d) semaph & semaph_lock initialisation had got lost since 2.6.22

e) since 2.6.22 the bios data address was truncated to 16 bits (needs 20
when shifted left)
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

sis190_tx_timeout
-> sis190_hw_start
   -> sis190_soft_reset
      -> msleep *splat*

PCI transactions are correctly flushed here.
The msleep() is probably useless.
Signed-off-by: NFrancois Romieu <romieu@fr.zoreil.com>
Cc: K.M. Liu <kmliu@sis.com.tw>

i ranges from 0 to 100 in the 'for' loop a few lines above.

Reported by davem.
Signed-off-by: NFrancois Romieu <romieu@fr.zoreil.com>
Cc: K.M. Liu <kmliu@sis.com.tw>

It is already done in sis190_init_one.
Signed-off-by: NFrancois Romieu <romieu@fr.zoreil.com>
Cc: K.M. Liu <kmliu@sis.com.tw>

More work is needed to handle correctly the PHY of the new devices
when connected to a 10Mb link but this change already helps some
users as is.

Fix for:
http://bugzilla.kernel.org/show_bug.cgi?id=9467Signed-off-by: NFrancois Romieu <romieu@fr.zoreil.com>
Cc: K.M. Liu <kmliu@sis.com.tw>
Cc: J. Gleacher <jgleacher@yahoo.com>
Cc: Alexandre Penasso Teixeira <alexandre@keepsoftware.com>
Cc: Arliton Rocha <arliton@gmail.com>
Cc: Juan Jose Pablos <juanjo@apertus.es>
Cc: Wipat Srutiprom <wipat.s@psu.ac.th>

This fixes a NULL pointer dereference that can occur when the
ucode is not loaded at the time __iwl_up is called.

The problem was reported at http://kerneloops.org/raw.php?rawid=2765&msgid=Signed-off-by: NReinette Chatre <reinette.chatre@intel.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Changeset 16b110c3 (dmfe warning fix)
bothed up the offsets read from the SROM so that it doesn't read the
same datums it used to.

The change made transformations like turning:

	"srom + 34"

into

	"(__le32 *)srom + 34/4"

which doesn't work because 4 does not divide evenly
into 34 so we're using a different pointer offset
than in the original code.

I've changed theses cases in dmfe_parse_srom() to
consistently use "(type *)(srom + offset)" preserving
the offsets from the original code.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix typo in arch/powerpc/boot/flatdevtree_env.h.
There is no Documentation/networking/ixgbe.txt.

README.cycladesZ is now in Documentation/.
wavelan.p.h is now in drivers/net/wireless/.
HFS.txt is now Documentation/filesystems/hfs.txt.
OSS-files are now in sound/oss/.
Signed-off-by: NJohann Felix Soden <johfel@users.sourceforge.net>
Acked-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The extra rom[0] check is flagging valid temperatures as invalid when
there is already a CRC data transmission check.

w1_therm_read_bin()
	if (rom[8] == crc && rom[0])
		verdict = 1;

Requiring rom[0] to be non-zero will flag as invalid temperature
conversions when the low byte is zero, specifically the temperatures 0C,
16C, 32C, 48C, -16C, -32C, and -48C.

The CRC check is produced on the device for the previous 8 bytes and is
required to ensure the data integrity in transmission.  I don't see why the
extra check for rom[0] being non-zero is in there.  Evgeniy Polyakov didn't
know either.  Just for a check I unplugged the sensor, executed a
temperature conversion, and read the results.  The read was all ff's, which
also failed the CRC, so it doesn't need to protect against a disconnected
sensor.

I have more extensive patches in the work, but these two trivial ones will
do for today.  I would like to hear from people who use the ds2490 USB to
one wire dongle.  1 if you would be willing to test the patches as I
currently only have the one sensor on a short parisite powered wire, 2 if
there is any cheap sources for the ds2490.
Signed-off-by: NDavid Fries <david@fries.net>
Acked-by: NEvgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Correct the decoding of negative C temperatures.  The code did a binary OR
of two bytes to make a 16 bit value, but assignd it to an integer.  This
caused the value to not be sign extended and to loose that it was a
negative number in the assignment.

Before the patch (in my freezer),
	w1_slave
	ed fe 4b 46 7f ff 03 10 e4 : crc=e4 YES
	ed fe 4b 46 7f ff 03 10 e4 t=4078
With the patch,
	e3 fe 4b 46 7f ff 0d 10 81 : crc=81 YES
	e3 fe 4b 46 7f ff 0d 10 81 t=-17
Signed-off-by: NDavid Fries <david@fries.net>
Acked-by: NEvgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>