There is no point in sending them through the scheduler.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucer@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

We can't submit to multiple rings at the same time anyway.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucer@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The padding depends on the firmware version and we need that for BO moves as
well, not only for VM updates.

v2: new approach of making pad_ib a ring function
v3: fix typo in macro name
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucer@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Don't keep that around twice.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

And use them in the CS instead of allocating IBs and jobs separately.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucer@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Specifying no IBs on command submission is invalid, stop crashing
badly when somebody tries it.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucer@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Just a leftover from semaphores.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucer@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Just leftovers from the semaphores.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucer@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Instead of when we try to bind it check the usermm when
we try to use it in the IOCTLs.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>

When the radeon driver resets a gpu, it attempts to test whether all the
rings can successfully handle an IB.  If these rings fail to respond, the
process will wait forever.  Another gpu reset can't happen at this point,
as the current reset holds a lock required to do so.  Instead, make all
the IB tests run with a timeout, so the system can attempt to recover
in this case.

While this doesn't fix the underlying issue with card resets failing, it
gives the system a higher chance of recovering.  These timeouts have been
confirmed to help both a Tathi and Hawaii card recover after a gpu reset.

This also adds a new function, radeon_fence_wait_timeout, that behaves like
fence_wait_timeout.  It is used instead of fence_wait_timeout as it continues
to work during a reset.  radeon_fence_wait is changed to be implemented
using this function.

V2:
 - Changed the timeout to 1s, as the default 10s from radeon_wait_timeout was
too long.  A timeout of 100ms was tested and found to be too short.
 - Changed radeon_fence_wait_timeout to behave more like fence_wait_timeout.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NMatthew Dawson <matthew@mjdsystems.ca>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Drop needless function wrapper.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Move that out of the main IOCTL function.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

And use it in UVD/VCE command patching.

v2: squash in Christian's fix
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

We only need a few dw here.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

VBIOS does this for us in asic_init.

v2: update iceland as well
Reviewed-by: NMonk Liu <monk.liu@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

VBIOS does this for us in asic_init.
Reviewed-by: NMonk Liu <monk.liu@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Generally a good idea between VM sessions.  We need a way to
detect VM pass-through in general and always run asic_init in
that case.
Reviewed-by: NMonk Liu <monk.liu@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Required to make desicions about certain code pathes.
Reviewed-by: NMonk Liu <monk.liu@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This table is found on boards that support SR-IOV.  This will
be used to determine if the board supports SR-IOV and allow
the driver to take specific action in certain cases.
Reviewed-by: NMonk Liu <monk.liu@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

amdgpu_boot_test_post_card() is not used anywhere.  Probably
a leftover from the original port from radeon.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NTom St Denis <tom.stdenis@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

ACP IP have internal DMA controller, DW I2S controller and DSPs
as separate power tiles. DMA and I2S devices are added to generic
pm domain, so that entire IP can be powered off/on at appropriate
times. Unused DSPs are made to be powered off though they are powered
on during ACP pm domain power on sequence.
Signed-off-by: NMaruthi Bayyavarapu <maruthi.bayyavarapu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This adds the ACP (Audio CoProcessor) IP driver and wires
it up to the amdgpu driver.  The ACP block provides the DMA
engine for i2s based ALSA driver. This is required for audio
on APUs that utilize an i2s codec.
Reviewed-by: NJammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: NMaruthi Bayyavarapu <maruthi.bayyavarapu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NMurali Krishna Vemuri <murali-krishna.vemuri@amd.com>
Signed-off-by: NMaruthi Bayyavarapu <maruthi.bayyavarapu@amd.com>
Signed-off-by: NChunming Zhou <david1.zhou@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

That works with other values as well.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Don't calculate the end address multiple times.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Neither the global nor the local mutex exists any more and
amdgpu doesn't support cayman.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

No need to fence every page table, just the page directory is enough.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NChunming Zhou <david1.zhou@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

If we can't copy entries from the GTT or fill them with one command split
up the mapping operation into multiple ones.

v2: agd: rebase on upstream
v3: squash in Christian's fix
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

That allows the VM code to use GART BOs from other driver instances.

v2: don't use copy optimization for foreign GARTs, that won't work.
v3: some more comment cleanups
v4: agd: rebase on upstream
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

No need to duplicate that code over and over again. Also stop using the
flags to determine if we need to map the addresses.

v2: constify the pages_addr
v3: rebased, fix typo in commit message
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Those are just leftovers from the time we wrote the VM
updates directly to the ring.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Crashing the system doesn't helps at all. Also properly return
-EINVAL if size or alignment are outside valid ranges.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

since the dependency job is also scheduled by the same
scheduler with the job depended on it, no need to
call wake up scheduler when the dep is scheduled.
Signed-off-by: NMonk Liu <Monk.Liu@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This adds the DCE8 enum header.
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NEric Huang <JinHuiEric.Huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

These add the interfaces for manual clock control.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NEric Huang <JinHuiEric.Huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

These add the interfaces for manual clock control.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NEric Huang <JinHuiEric.Huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The new sysfs interfaces:
pp_num_states: Read-only, return the number of all pp states, 0 if powerplay is not available.
pp_cur_state: Read-only, return the index number of current pp state.
pp_force_state: Read-write, to write a power state index will switch to selected state forcedly and
		enable forced state mode, disable forced state mode. such as "echo >...".
pp_table: Read-write, binary output, to be used to read or write the dpm table, the maximum
		file size is 4KB of page size.
pp_dpm_sclk: Read-write, reading will return a dpm levels list, to write an index number will force
		powerplay to set the corresponding dpm level.
pp_dpm_mclk: same as sclk.
pp_dpm_pcie: same as sclk.

And add new setting "manual" to the existing interface power_dpm_force_performance_level.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NEric Huang <JinHuiEric.Huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

With the scheduler enabled we don't need that any more.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NChunming Zhou <david1.zhou@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

It's not needed any more because all access goes through the scheduler now.

v2: Update commit message.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NChunming Zhou <david1.zhou@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>