Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 10 8月, 2009 2 次提交
    • C
      SUNRPC: Provide functions for managing universal addresses · a02d6926
      由 Chuck Lever 提交于 
      Introduce a set of functions in the kernel's RPC implementation for
converting between a socket address and either a standard
presentation address string or an RPC universal address.

The universal address functions will be used to encode and decode
RPCB_FOO and NFSv4 SETCLIENTID arguments.  The other functions are
part of a previous promise to deliver shared functions that can be
used by upper-layer protocols to display and manipulate IP
addresses.

The kernel's current address printf formatters were designed
specifically for kernel to user-space APIs that require a particular
string format for socket addresses, thus are somewhat limited for the
purposes of sunrpc.ko.  The formatter for IPv6 addresses, %pI6, does
not support short-handing or scope IDs.  Also, these printf formatters
are unique per address family, so a separate formatter string is
required for printing AF_INET and AF_INET6 addresses.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
      a02d6926
    • C
      NFS: Add ability to send MOUNTPROC_UMNT to the kernel's mountd client · 0b524123
      由 Chuck Lever 提交于 
      After certain failure modes of an NFS mount, an NFS client should send
a MOUNTPROC_UMNT request to remove the just-added mount entry from the
server's mount table.  While no-one should rely on the accuracy of the
server's mount table, sending a UMNT is simply being a good internet
neighbor.

Since NFS mount processing is handled in the kernel now, we will need
a function in the kernel's mountd client that can post a MOUNTRPC_UMNT
request, in order to handle these failure modes.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
      0b524123
  3. 18 6月, 2009 11 次提交
  5. 03 4月, 2009 2 次提交
    • D
      NFS: Add mount options to enable local caching on NFS · b797cac7
      由 David Howells 提交于 
      Add NFS mount options to allow the local caching support to be enabled.

The attached patch makes it possible for the NFS filesystem to be told to make
use of the network filesystem local caching service (FS-Cache).

To be able to use this, a recent nfsutils package is required.

There are three variant NFS mount options that can be added to a mount command
to control caching for a mount.  Only the last one specified takes effect:

 (*) Adding "fsc" will request caching.

 (*) Adding "fsc=<string>" will request caching and also specify a uniquifier.

 (*) Adding "nofsc" will disable caching.

For example:

	mount warthog:/ /a -o fsc

The cache of a particular superblock (NFS FSID) will be shared between all
mounts of that volume, provided they have the same connection parameters and
are not marked 'nosharecache'.

Where it is otherwise impossible to distinguish superblocks because all the
parameters are identical, but the 'nosharecache' option is supplied, a
uniquifying string must be supplied, else only the first mount will be
permitted to use the cache.

If there's a key collision, then the second mount will disable caching and give
a warning into the kernel log.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Acked-by: NSteve Dickson <steved@redhat.com>
Acked-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
Acked-by: NAl Viro <viro@zeniv.linux.org.uk>
Tested-by: NDaire Byrne <Daire.Byrne@framestore.com>
      b797cac7
    • D
      NFS: Define and create superblock-level objects · 08734048
      由 David Howells 提交于 
      Define and create superblock-level cache index objects (as managed by
nfs_server structs).

Each superblock object is created in a server level index object and is itself
an index into which inode-level objects are inserted.

Ideally there would be one superblock-level object per server, and the former
would be folded into the latter; however, since the "nosharecache" option
exists this isn't possible.

The superblock object key is a sequence consisting of:

 (1) Certain superblock s_flags.

 (2) Various connection parameters that serve to distinguish superblocks for
     sget().

 (3) The volume FSID.

 (4) The security flavour.

 (5) The uniquifier length.

 (6) The uniquifier text.  This is normally an empty string, unless the fsc=xyz
     mount option was used to explicitly specify a uniquifier.

The key blob is of variable length, depending on the length of (6).

The superblock object is given no coherency data to carry in the auxiliary data
permitted by the cache.  It is assumed that the superblock is always coherent.

This patch also adds uniquification handling such that two otherwise identical
superblocks, at least one of which is marked "nosharecache", won't end up
trying to share the on-disk cache.  It will be possible to manually provide a
uniquifier through a mount option with a later patch to avoid the error
otherwise produced.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Acked-by: NSteve Dickson <steved@redhat.com>
Acked-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
Acked-by: NAl Viro <viro@zeniv.linux.org.uk>
Tested-by: NDaire Byrne <Daire.Byrne@framestore.com>
      08734048
  7. 20 3月, 2009 1 次提交
    • T
      NFS: Optimise NFS close() · 7fe5c398
      由 Trond Myklebust 提交于 
      Close-to-open cache consistency rules really only require us to flush out
writes on calls to close(), and require us to revalidate attributes on the
very last close of the file.

Currently we appear to be doing a lot of extra attribute revalidation
and cache flushes.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
      7fe5c398
  9. 12 3月, 2009 1 次提交
    • T
      NFS: Throttle page dirtying while we're flushing to disk · 72cb77f4
      由 Trond Myklebust 提交于 
      The following patch is a combination of a patch by myself and Peter
Staubach.

Trond: If we allow other processes to dirty pages while a process is doing
a consistency sync to disk, we can end up never making progress.

Peter: Attached is a patch which addresses a continuing problem with
the NFS client generating out of order WRITE requests.  While
this is compliant with all of the current protocol
specifications, there are servers in the market which can not
handle out of order WRITE requests very well.  Also, this may
lead to sub-optimal block allocations in the underlying file
system on the server.  This may cause the read throughputs to
be reduced when reading the file from the server.

Peter: There has been a lot of work recently done to address out of
order issues on a systemic level.  However, the NFS client is
still susceptible to the problem.  Out of order WRITE
requests can occur when pdflush is in the middle of writing
out pages while the process dirtying the pages calls
generic_file_buffered_write which calls
generic_perform_write which calls
balance_dirty_pages_rate_limited which ends up calling
writeback_inodes which ends up calling back into the NFS
client to writes out dirty pages for the same file that
pdflush happens to be working with.
Signed-off-by: NPeter Staubach <staubach@redhat.com>
[modification by Trond to merge the two similar patches]
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
      72cb77f4
  11. 24 12月, 2008 3 次提交
  13. 11 10月, 2008 1 次提交
  15. 08 10月, 2008 2 次提交
  17. 07 10月, 2008 1 次提交
  19. 10 7月, 2008 1 次提交
  21. 20 3月, 2008 3 次提交
  23. 06 3月, 2008 1 次提交
    • E
      NFS: use new LSM interfaces to explicitly set mount options · f9c3a380
      由 Eric Paris 提交于 
      NFS and SELinux worked together previously because SELinux had NFS
specific knowledge built in.  This design was approved by both groups
back in 2004 but the recent NFS changes to use nfs_parsed_mount_data and
the usage of nfs_clone_mount_data showed this to be a poor fragile
solution.  This patch fixes the NFS functionality regression by making
use of the new LSM interfaces to allow an FS to explicitly set its own
mount options.

The explicit setting of mount options is done in the nfs get_sb
functions which are called before the generic vfs hooks try to set mount
options for filesystems which use text mount data.

This does not currently support NFSv4 as that functionality did not
exist in previous kernels and thus there is no regression.  I will be
adding the needed code, which I believe to be the exact same as the v3
code, in nfs4_get_sb for 2.6.26.
Signed-off-by: NEric Paris <eparis@redhat.com>
Acked-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: NJames Morris <jmorris@namei.org>
      f9c3a380
  25. 26 2月, 2008 1 次提交
    • T
      NFS: Add an nfsiod workqueue · 5746006f
      由 Trond Myklebust 提交于 
      NFS post-rpciod cleanups often involve tasks that cannot be safely
performed within the rpciod context (due to deadlock concerns). We
therefore add a dedicated NFS workqueue that can perform tasks like
cleaning up state after an interrupted NFSv4 open() call, or calling
put_nfs_open_context() after an asynchronous read or write call.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
      5746006f
  27. 30 1月, 2008 7 次提交
  29. 10 10月, 2007 3 次提交