- 30 9月, 2015 1 次提交
-
-
由 Eric Dumazet 提交于
None of these functions need to change the socket, make it const. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 9月, 2015 1 次提交
-
-
由 Eric Dumazet 提交于
This is done to make sure we do not change listener socket while sending SYNACK packets while socket lock is not held. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 24 4月, 2015 1 次提交
-
-
由 Eric Dumazet 提交于
[ 3897.923145] BUG: unable to handle kernel NULL pointer dereference at 0000000000000080 [ 3897.931025] IP: [<ffffffffa9f27686>] reqsk_timer_handler+0x1a6/0x243 There is a race when reqsk_timer_handler() and tcp_check_req() call inet_csk_reqsk_queue_unlink() on the same req at the same time. Before commit fa76ce73 ("inet: get rid of central tcp/dccp listener timer"), listener spinlock was held and race could not happen. To solve this bug, we change reqsk_queue_unlink() to not assume req must be found, and we return a status, to conditionally release a refcount on the request sock. This also means tcp_check_req() in non fastopen case might or not consume req refcount, so tcp_v6_hnd_req() & tcp_v4_hnd_req() have to properly handle this. (Same remark for dccp_check_req() and its callers) inet_csk_reqsk_queue_drop() is now too big to be inlined, as it is called 4 times in tcp and 3 times in dccp. Fixes: fa76ce73 ("inet: get rid of central tcp/dccp listener timer") Signed-off-by: NEric Dumazet <edumazet@google.com> Reported-by: NYuchung Cheng <ycheng@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 24 3月, 2015 1 次提交
-
-
由 Eric Dumazet 提交于
dccp_v6_err() can restrict lookups to ehash table, and not to listeners. Note this patch creates the infrastructure, but this means that ICMP messages for request sockets are ignored until complete conversion. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 21 3月, 2015 2 次提交
-
-
由 Eric Dumazet 提交于
One of the major issue for TCP is the SYNACK rtx handling, done by inet_csk_reqsk_queue_prune(), fired by the keepalive timer of a TCP_LISTEN socket. This function runs for awful long times, with socket lock held, meaning that other cpus needing this lock have to spin for hundred of ms. SYNACK are sent in huge bursts, likely to cause severe drops anyway. This model was OK 15 years ago when memory was very tight. We now can afford to have a timer per request sock. Timer invocations no longer need to lock the listener, and can be run from all cpus in parallel. With following patch increasing somaxconn width to 32 bits, I tested a listener with more than 4 million active request sockets, and a steady SYNFLOOD of ~200,000 SYN per second. Host was sending ~830,000 SYNACK per second. This is ~100 times more what we could achieve before this patch. Later, we will get rid of the listener hash and use ehash instead. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
When request sock are put in ehash table, the whole notion of having a previous request to update dl_next is pointless. Also, following patch will get rid of big purge timer, so we want to delete a request sock without holding listener lock. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 3月, 2015 2 次提交
-
-
由 Eric Dumazet 提交于
We can now use inet_hash() and __inet_hash() instead of private functions. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Intent is to converge IPv4 & IPv6 inet_hash functions to factorize code. IPv4 sockets initialize sk_rcv_saddr and sk_v6_daddr in this patch, thanks to new sk_daddr_set() and sk_rcv_saddr_set() helpers. __inet6_hash can now use sk_ehashfn() instead of a private inet6_sk_ehashfn() and will simply use __inet_hash() in a following patch. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 3月, 2015 1 次提交
-
-
由 Eric Dumazet 提交于
listener socket can be used to set net pointer, and will be later used to hold a reference on listener. Add a const qualifier to first argument (struct request_sock_ops *), and factorize all write_pnet(&ireq->ireq_net, sock_net(sk)); Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 3月, 2015 2 次提交
-
-
由 Eric Dumazet 提交于
Before inserting request socks into general hash table, fill their socket family. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
I forgot to update dccp_v6_conn_request() & cookie_v6_check(). They both need to set ireq->ireq_net and ireq->ir_cookie Lets clear ireq->ir_cookie in inet_reqsk_alloc() Signed-off-by: NEric Dumazet <edumazet@google.com> Fixes: 33cf7c90 ("net: add real socket cookies") Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 10月, 2014 1 次提交
-
-
由 Eric Dumazet 提交于
Commit 971f10ec ("tcp: better TCP_SKB_CB layout to reduce cache line misses") added a regression for SO_BINDTODEVICE on IPv6. This is because we still use inet6_iif() which expects that IP6 control block is still at the beginning of skb->cb[] This patch adds tcp_v6_iif() helper and uses it where necessary. Because __inet6_lookup_skb() is used by TCP and DCCP, we add an iif parameter to it. Signed-off-by: NEric Dumazet <edumazet@google.com> Fixes: 971f10ec ("tcp: better TCP_SKB_CB layout to reduce cache line misses") Acked-by: NCong Wang <cwang@twopensource.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 9月, 2014 1 次提交
-
-
由 Eric Dumazet 提交于
ipv6_opt_accepted() assumes IP6CB(skb) holds the struct inet6_skb_parm that it needs. Lets not assume this, as TCP stack might use a different place. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 28 6月, 2014 1 次提交
-
-
由 Octavian Purdila 提交于
Since pktops is only used for IPv6 only and opts is used for IPv4 only, we can move these fields into a union and this allows us to drop the inet6_reqsk_alloc function as after this change it becomes equivalent with inet_reqsk_alloc. This patch also fixes a kmemcheck issue in the IPv6 stack: the flags field was not annotated after a request_sock was allocated. Signed-off-by: NOctavian Purdila <octavian.purdila@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 12月, 2013 1 次提交
-
-
由 Hannes Frederic Sowa 提交于
IPV6_PMTU_INTERFACE is the same as IPV6_PMTU_PROBE for ipv6. Add it nontheless for symmetry with IPv4 sockets. Also drop incoming MTU information if this mode is enabled. The additional bit in ipv6_pinfo just eats in the padding behind the bitfield. There are no changes to the layout of the struct at all. Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 12月, 2013 1 次提交
-
-
由 Florent Fourcot 提交于
This patch is following b579035f "ipv6: remove old conditions on flow label sharing" Since there is no reason to restrict a label to a destination, we should not erase the destination value of a socket with the value contained in the flow label storage. This patch allows to really have the same flow label to more than one destination. Signed-off-by: NFlorent Fourcot <florent.fourcot@enst-bretagne.fr> Reviewed-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 06 12月, 2013 1 次提交
-
-
由 Steffen Klassert 提交于
FLOWI_FLAG_CAN_SLEEP was used to notify xfrm about the posibility to sleep until the needed states are resolved. This code is gone, so FLOWI_FLAG_CAN_SLEEP is not needed anymore. Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
-
- 11 10月, 2013 1 次提交
-
-
由 Eric Dumazet 提交于
In commit 634fb979 ("inet: includes a sock_common in request_sock") I forgot that the two ports in sock_common do not have same byte order : skc_dport is __be16 (network order), but skc_num is __u16 (host order) So sparse complains because ir_loc_port (mapped into skc_num) is considered as __u16 while it should be __be16 Let rename ir_loc_port to ireq->ir_num (analogy with inet->inet_num), and perform appropriate htons/ntohs conversions. Signed-off-by: NEric Dumazet <edumazet@google.com> Reported-by: NWu Fengguang <fengguang.wu@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 10 10月, 2013 1 次提交
-
-
由 Eric Dumazet 提交于
TCP listener refactoring, part 5 : We want to be able to insert request sockets (SYN_RECV) into main ehash table instead of the per listener hash table to allow RCU lookups and remove listener lock contention. This patch includes the needed struct sock_common in front of struct request_sock This means there is no more inet6_request_sock IPv6 specific structure. Following inet_request_sock fields were renamed as they became macros to reference fields from struct sock_common. Prefix ir_ was chosen to avoid name collisions. loc_port -> ir_loc_port loc_addr -> ir_loc_addr rmt_addr -> ir_rmt_addr rmt_port -> ir_rmt_port iif -> ir_iif Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 09 10月, 2013 1 次提交
-
-
由 Eric Dumazet 提交于
TCP listener refactoring, part 4 : To speed up inet lookups, we moved IPv4 addresses from inet to struct sock_common Now is time to do the same for IPv6, because it permits us to have fast lookups for all kind of sockets, including upcoming SYN_RECV. Getting IPv6 addresses in TCP lookups currently requires two extra cache lines, plus a dereference (and memory stall). inet6_sk(sk) does the dereference of inet_sk(__sk)->pinet6 This patch is way bigger than its IPv4 counter part, because for IPv4, we could add aliases (inet_daddr, inet_rcv_saddr), while on IPv6, it's not doable easily. inet6_sk(sk)->daddr becomes sk->sk_v6_daddr inet6_sk(sk)->rcv_saddr becomes sk->sk_v6_rcv_saddr And timewait socket also have tw->tw_v6_daddr & tw->tw_v6_rcv_saddr at the same offset. We get rid of INET6_TW_MATCH() as INET6_MATCH() is now the generic macro. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 9月, 2013 1 次提交
-
-
由 Duan Jiong 提交于
DCCP shouldn't be setting sk_err on redirects as it isn't an error condition. it should be doing exactly what tcp is doing and leaving the error handler without touching the socket. Signed-off-by: NDuan Jiong <duanj.fnst@cn.fujitsu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 3月, 2013 1 次提交
-
-
由 Christoph Paasch 提交于
TCPCT uses option-number 253, reserved for experimental use and should not be used in production environments. Further, TCPCT does not fully implement RFC 6013. As a nice side-effect, removing TCPCT increases TCP's performance for very short flows: Doing an apache-benchmark with -c 100 -n 100000, sending HTTP-requests for files of 1KB size. before this patch: average (among 7 runs) of 20845.5 Requests/Second after: average (among 7 runs) of 21403.6 Requests/Second Signed-off-by: NChristoph Paasch <christoph.paasch@uclouvain.be> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 12月, 2012 1 次提交
-
-
由 Christoph Paasch 提交于
If in either of the above functions inet_csk_route_child_sock() or __inet_inherit_port() fails, the newsk will not be freed: unreferenced object 0xffff88022e8a92c0 (size 1592): comm "softirq", pid 0, jiffies 4294946244 (age 726.160s) hex dump (first 32 bytes): 0a 01 01 01 0a 01 01 02 00 00 00 00 a7 cc 16 00 ................ 02 00 03 01 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff8153d190>] kmemleak_alloc+0x21/0x3e [<ffffffff810ab3e7>] kmem_cache_alloc+0xb5/0xc5 [<ffffffff8149b65b>] sk_prot_alloc.isra.53+0x2b/0xcd [<ffffffff8149b784>] sk_clone_lock+0x16/0x21e [<ffffffff814d711a>] inet_csk_clone_lock+0x10/0x7b [<ffffffff814ebbc3>] tcp_create_openreq_child+0x21/0x481 [<ffffffff814e8fa5>] tcp_v4_syn_recv_sock+0x3a/0x23b [<ffffffff814ec5ba>] tcp_check_req+0x29f/0x416 [<ffffffff814e8e10>] tcp_v4_do_rcv+0x161/0x2bc [<ffffffff814eb917>] tcp_v4_rcv+0x6c9/0x701 [<ffffffff814cea9f>] ip_local_deliver_finish+0x70/0xc4 [<ffffffff814cec20>] ip_local_deliver+0x4e/0x7f [<ffffffff814ce9f8>] ip_rcv_finish+0x1fc/0x233 [<ffffffff814cee68>] ip_rcv+0x217/0x267 [<ffffffff814a7bbe>] __netif_receive_skb+0x49e/0x553 [<ffffffff814a7cc3>] netif_receive_skb+0x50/0x82 This happens, because sk_clone_lock initializes sk_refcnt to 2, and thus a single sock_put() is not enough to free the memory. Additionally, things like xfrm, memcg, cookie_values,... may have been initialized. We have to free them properly. This is fixed by forcing a call to tcp_done(), ending up in inet_csk_destroy_sock, doing the final sock_put(). tcp_done() is necessary, because it ends up doing all the cleanup on xfrm, memcg, cookie_values, xfrm,... Before calling tcp_done, we have to set the socket to SOCK_DEAD, to force it entering inet_csk_destroy_sock. To avoid the warning in inet_csk_destroy_sock, inet_num has to be set to 0. As inet_csk_destroy_sock does a dec on orphan_count, we first have to increase it. Calling tcp_done() allows us to remove the calls to tcp_clear_xmit_timer() and tcp_cleanup_congestion_control(). A similar approach is taken for dccp by calling dccp_done(). This is in the kernel since 093d2823 (tproxy: fix hash locking issue when using port redirection in __inet_inherit_port()), thus since version >= 2.6.37. Signed-off-by: NChristoph Paasch <christoph.paasch@uclouvain.be> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 7月, 2012 1 次提交
-
-
由 David S. Miller 提交于
This will be used so that we can compose a full flow key. Even though we have a route in this context, we need more. In the future the routes will be without destination address, source address, etc. keying. One ipv4 route will cover entire subnets, etc. In this environment we have to have a way to possess persistent storage for redirects and PMTU information. This persistent storage will exist in the FIB tables, and that's why we'll need to be able to rebuild a full lookup flow key here. Using that flow key will do a fib_lookup() and create/update the persistent entry. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 7月, 2012 1 次提交
-
-
由 David S. Miller 提交于
This is the ipv6 version of inet_csk_update_pmtu(). Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 7月, 2012 2 次提交
-
-
由 David S. Miller 提交于
No longer necessary. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 7月, 2012 1 次提交
-
-
由 RongQing.Li 提交于
opt always equals np->opts, so it is meaningless to define opt, and check if opt does not equal np->opts and then try to free opt. Signed-off-by: NRongQing.Li <roy.qing.li@gmail.com> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 6月, 2012 1 次提交
-
-
由 David S. Miller 提交于
One tricky issue on the ipv6 side vs. ipv4 is that the ICMP callouts to handle the error pass the 32-bit info cookie in network byte order whereas ipv4 passes it around in host byte order. Like the ipv4 side, we have two helper functions. One for when we have a socket context and one for when we do not. ip6ip6 tunnels are not handled here, because they handle PMTU events by essentially relaying another ICMP packet-too-big message back to the original sender. This patch allows us to get rid of rt6_do_pmtu_disc(). It handles all kinds of situations that simply cannot happen when we do the PMTU update directly using a fully resolved route. In fact, the "plen == 128" check in ip6_rt_update_pmtu() can very likely be removed or changed into a BUG_ON() check. We should never have a prefixed ipv6 route when we get there. Another piece of strange history here is that TCP and DCCP, unlike in ipv4, never invoke the update_pmtu() method from their ICMP error handlers. This is incredibly astonishing since this is the context where we have the most accurate context in which to make a PMTU update, namely we have a fully connected socket and associated cached socket route. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 4月, 2012 1 次提交
-
-
由 Eric Dumazet 提交于
When we need to clone skb, we dont drop a packet. Call consume_skb() to not confuse dropwatch. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 4月, 2012 1 次提交
-
-
由 Eric Dumazet 提交于
There are two struct request_sock_ops providers, tcp and dccp. inet_csk_reqsk_queue_prune() can avoid testing syn_ack_timeout being NULL if we make it non NULL like syn_ack_timeout Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Gerrit Renker <gerrit@erg.abdn.ac.uk> Cc: dccp@vger.kernel.org Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 3月, 2012 1 次提交
-
-
由 Samuel Jero 提交于
This fixes a bug in the sequence number validation during the initial handshake. The code did not treat the initial sequence numbers ISS and ISR as read-only and did not keep state for GSR and GSS as required by the specification. This causes problems with retransmissions during the initial handshake, causing the budding connection to be reset. This patch now treats ISS/ISR as read-only and tracks GSS/GSR as required. Signed-off-by: NSamuel Jero <sj323707@ohio.edu> Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk>
-
- 23 11月, 2011 1 次提交
-
-
由 Alexey Dobriyan 提交于
C assignment can handle struct in6_addr copying. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 10月, 2011 1 次提交
-
-
由 Eric Dumazet 提交于
commit 66b13d99 (ipv4: tcp: fix TOS value in ACK messages sent from TIME_WAIT) fixed IPv4 only. This part is for the IPv6 side, adding a tclass param to ip6_xmit() We alias tw_tclass and tw_tos, if socket family is INET6. [ if sockets is ipv4-mapped, only IP_TOS socket option is used to fill TOS field, TCLASS is not taken into account ] Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 07 8月, 2011 1 次提交
-
-
由 David S. Miller 提交于
Computers have become a lot faster since we compromised on the partial MD4 hash which we use currently for performance reasons. MD5 is a much safer choice, and is inline with both RFC1948 and other ISS generators (OpenBSD, Solaris, etc.) Furthermore, only having 24-bits of the sequence number be truly unpredictable is a very serious limitation. So the periodic regeneration and 8-bit counter have been removed. We compute and use a full 32-bit sequence number. For ipv6, DCCP was found to use a 32-bit truncated initial sequence number (it needs 43-bits) and that is fixed here as well. Reported-by: NDan Kaminsky <dan@doxpara.com> Tested-by: NWilly Tarreau <w@1wt.eu> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 4月, 2011 1 次提交
-
-
由 Eric Dumazet 提交于
We lack proper synchronization to manipulate inet->opt ip_options Problem is ip_make_skb() calls ip_setup_cork() and ip_setup_cork() possibly makes a copy of ipc->opt (struct ip_options), without any protection against another thread manipulating inet->opt. Another thread can change inet->opt pointer and free old one under us. Use RCU to protect inet->opt (changed to inet->inet_opt). Instead of handling atomic refcounts, just copy ip_options when necessary, to avoid cache line dirtying. We cant insert an rcu_head in struct ip_options since its included in skb->cb[], so this patch is large because I had to introduce a new ip_options_rcu structure. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 23 4月, 2011 1 次提交
-
-
由 Eric Dumazet 提交于
Add const qualifiers to structs iphdr, ipv6hdr and in6_addr pointers where possible, to make code intention more obvious. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 3月, 2011 3 次提交
-
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Create two sets of port member accessors, one set prefixed by fl4_* and the other prefixed by fl6_* This will let us to create AF optimal flow instances. It will work because every context in which we access the ports, we have to be fully aware of which AF the flowi is anyways. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-