- 03 1月, 2006 32 次提交
-
-
由 Takashi Iwai 提交于
Modules: KORG1212 driver Clean up debug prints in korg1212 driver. Also, clean up spaces/indents in some places. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Modules: EMU10K1/EMU10K2 driver Minor clean up of emu10k1 memory block allocation. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Modules: EMU10K1/EMU10K2 driver Minor clean up of the emu10k1x interrupt handler code. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Modules: AC97 Codec Remove the definition of ac97_enum struct from the public ac97_codec.h. It's used only in the module. The location of struct ac97_pcm is moved closer to its accessor to improve readability. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Modules: CA0106 driver Clean up snd-ca0106 driver code: - Fix spaces and indents - Remove unnecessary spinlocks - Clean up the mixer callbacks using private_value - Clean up mixer constructors using an array Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Modules: Intel8x0 driver,Intel8x0-modem driver Remove superfluous delay macro. Call appropriate functions directly. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Modules: CS4281 driver Remove the own delay function. Call appropriate functions directly. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Modules: ATIIXP driver,ATIIXP-modem driver Remove superfluous macros for delay. Call appropriate functions directly. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Modules: PARISC Harmony driver Clean up snd-harmony driver code: - Give standard module options - Fix spinlocks - Fix the error path of request_irq() - Clean up redundant codes Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Modules: MIPS AU1x00 driver Clean up snd-au1x00 driver code: - Remove global variables - Remove old compatibility codes - Fix DMA-link allocation/release functions in hw_params and hw_free callbacks (they may be called multiple times) - Fix spinlocks Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Modules: CS4231 driver Clean up ISA cs4231 code, removing experimental EBUS/SBUS merge, to improve readability. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Modules: SA11xx UDA1341 driver,L3 drivers,UDA1341 Clean up sa11xx-uda1341 driver: - Fix buggy destructor - Remove the global variable - Move array definitions from uda1341.h - Make functions in uda1341.c static Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Modules: I2C tea6330t Remove tea6330t struct definition from public header. It's anyway unaccessible from outside. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Replace snd_vx_delay() with appropriate delay/sleep functions. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Modules: Generic drivers Clean up snd-dummy driver code. - Make common PCM callbacks - Simplify open callback - Remove unnecessary irqsave in control callbacks Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Modules: ALSA<-OSS emulation Use standard bitmap functions instead of in-house ones. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Modules: ISA,PCI drivers Sort Kconfig entries in alphabetical order. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Modules: Documentation,CS5535 driver Minor clean up and fixes for CS5535 audio driver. Added an entry in ALSA-Configuration.txt, too. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Jaya Kumar 提交于
Add support for the CS5535 Audio device. I've fixed up some errors as per Takashi's advice from the thread: http://lkml.org/lkml/2005/9/15/119 From: Alan Cox <alan@lxorguk.ukuu.org.uk> cs5535 is a 32bit x86 only device using weird CPU features Signed-off-by: NJaya Kumar <jayakumar.alsa@gmail.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Remove superflous pcm_free callbacks. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Kurt J. Bosch 提交于
Modules: ENS1370/1+ driver This patch fixes missing suspend/resume-code for snd-ens1371 (but not for snd-ens1370) Signed-off-by: NKurt J. Bosch <kjb-temp-2005@gmx.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Daniel Mueller 提交于
Modules: HDA Codec driver The patch fixes the problem of mute onboard HDA sound output, buildin V.92 modem idendification and functionality. Signed-off-by: NDaniel Mueller <daniel.mueller@siemens.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Jaroslav Kysela 提交于
Modules: AC97 Codec For debugging and problem finding purposes, show also the PCI subsystem vendor/device values in the ac97#X proc file. Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 James Courtier-Dutton 提交于
Modules: EMU10K1/EMU10K2 driver Signed-off-by: NJames Courtier-Dutton <James@superbug.co.uk>
-
由 James Courtier-Dutton 提交于
Modules: EMU10K1/EMU10K2 driver on Audigy 2 ZS Notebook. Set the master volume to about 6 or 8% in alsamixer. This will attenuate the output enough for better sound quality. Note: Only stereo enabled at present. The distortion is caused by the output path after the DSP adding 12dB gain to the output while still in digital mode, resulting in wrap around distortion. Signed-off-by: NJames Courtier-Dutton <James@superbug.co.uk>
-
由 Takashi Iwai 提交于
Modules: ALI5451 driver Fix the codec accessors to avoid soft lockup. Spin locks are revised, too. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Jaroslav Kysela 提交于
Modules: ICE1712 driver Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
Modules: VIA82xx driver Added the dxs entry for MSI KT800 Delta-FSR. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Lee Revell 提交于
Modules: EMU10K1/EMU10K2 driver Add support for Audigy 2 subsystem 2006. Signed-off-by: NLee Revell <rlrevell@joe-job.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Lee Revell 提交于
Modules: EMU10K1/EMU10K2 driver Enable side surround channels for Audigy2 EX. Tested by Rick Wright <riwright@vt.edu>. Signed-off-by: NLee Revell <rlrevell@joe-job.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Randy Dunlap 提交于
Modules: HDA Intel driver Rate-limit the azx_get_response timeout message. A continuous 2 per second is too much. Signed-off-by: NRandy Dunlap <randy_d_dunlap@linux.intel.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Modules: HDA Codec driver Allocate amp hash array dynamically instead of static array. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 23 12月, 2005 1 次提交
-
-
由 Adrian Bunk 提交于
Introduce a Kconfig symbol SPARC that is defined on both the sparc and sparc64 architectures. This symbol makes some dependencies more readable. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 12月, 2005 1 次提交
-
-
由 Sergei Shtylylov 提交于
We have found some issues with Au1550 AC'97 OSS driver in 2.6 (sound/oss/au1550_ac97.c), though it also should concern 2.4 driver (drivers/sound/au1550_psc.c). start_dac() grabs a spinlock already held by its caller, au1550_write(). This doesn't show up with the standard UP spinlock impelmentation but when the different one (mutex based) is in use, a lockup happens. And the interrupt handlers also didn't grab the spinlock -- that's OK in the usual kernel but not when the IRQ handlers are threaded. So, they're grabbing the spinlock now (as every correct interrupt handler should do). Signed-off-by: NKonstantin Baidarov <kbaidarov@ru.mvista.com> Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 23 11月, 2005 2 次提交
-
-
由 Hugh Dickins 提交于
Earlier I unifdefed PageCompound, so that snd_pcm_mmap_control_nopage and others can give out a 0-order component of a higher-order page, which won't be mistakenly freed when zap_pte_range unmaps it. But many Bad page states reported a PG_reserved was freed after all: I had missed that we need to say __GFP_COMP to get compound page behaviour. Some of these higher-order pages are allocated by snd_malloc_pages, some by snd_malloc_dev_pages; or if SBUS, by sbus_alloc_consistent - but that has no gfp arg, so add __GFP_COMP into its sparc32/64 implementations. I'm still rather puzzled that DRM seems not to need a similar change. Signed-off-by: NHugh Dickins <hugh@veritas.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Hugh Dickins 提交于
Something noticed when studying use of VM_RESERVED in different drivers: snd_usX2Y_hwdep_pcm_vm_nopage omitted to get_page: fixed. And how did this work before? Aargh! That nopage is returning a page from within a buffer allocated by snd_malloc_pages, which allocates a high-order page, then does SetPageReserved on each 0-order page within. That would have worked in 2.6.14, because when the area was unmapped, PageReserved inhibited put_page. 2.6.15-rc1 removed that inhibition (while leaving ineffective PageReserveds around for now), but it hasn't caused trouble because.. we've not been freeing from VM_RESERVED at all. Signed-off-by: NHugh Dickins <hugh@veritas.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 16 11月, 2005 1 次提交
-
-
由 Guido Guenther 提交于
ever since suspend to disk works I had the problem that headphone (un)plugging doesn't get detected properly anymore after the first resume. Reloading the module worked around this ever since, however the real cause of the problem was that after a resume the driver only got interrupts on "unplug" not on "plug". Reactivating the headphone status interrupt in tumbler_resume fixes this. This shouldn't cause any trouble with software suspend, but it would be nice if somebody could confirm this: Signed-off-by: NGuido Guenther <agx@sigxcpu.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 14 11月, 2005 1 次提交
-
-
由 Jeff Garzik 提交于
Since few people need the support anymore, this moves the legacy pm_xxx functions to CONFIG_PM_LEGACY, and include/linux/pm_legacy.h. Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 11 11月, 2005 2 次提交
-
-
由 Grant Coady 提交于
pci_ids cleanup: fixup bt87x.c: two macro defined IDs missed in prior cleanup. Caught by Chun-Chung Chen <cjj@u.washington.edu>: "In the patch for bt87x.c, you seemed have missed the two occurrences of BT_DEVICE on line 897 and line 898." Signed-off-by: NGrant Coady <gcoady@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-