This was used by the old hw-breakpoints API, but now there is nothing
is using it anymore, so just kill it off.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Nothing is using these now, so kill them all off.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

This is the next big chunk of hw_breakpoint support. This decouples
the SH-4A support from the core and moves it out in to its own stub,
following many of the conventions established with the perf events
layering.

In addition to extending SH-4A support to encapsulate the remainder
of the UBC channels, clock framework support for handling the UBC
interface clock is added as well, allowing for dynamic clock gating.

This also fixes up a regression introduced by the SIGTRAP handling that
broke the ksym_tracer, to the extent that the current support works well
with all of the ksym_tracer/ptrace/kgdb. The kprobes singlestep code will
follow in turn.

With this in place, the remaining UBC variants (SH-2A and SH-4) can now
be trivially plugged in.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

SH-2A was referencing the old handler that no longer exists, fix it up.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

This is the initial step for converting singlestep handling via ptrace
over to hw_breakpoints.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

This kills off kgdb's breakpoint handler and ties in to the notifier
chain instead.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Presently the hw_breakpoint code is the primary notifier dispatch for
breakpoint traps, although it's only UBC traps that are of particular
interest there. This patches in a check to allow non-UBC generated
breakpoints to pass through down the remainder of the notifier chain,
giving things like kgdb a chance at getting notified.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

This follows the x86 change to select perf events when hw_breakpoint
support is enabled. This fixes up build issues where perf events can
otherwise be disabled on their own.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

The event callback handling has been removed in favour of going through a
generic event handler to handle overflows. Follows the x86 change.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

We don't actually require this in the cpu_relax() polling case, so just
cuddle these around the sleeping version.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

This fixes up some crashes with IRQs racing the need_resched() test under
QEMU.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha-2.6:
  alpha: Convert BUG() to use unreachable()
  alpha: Add minimal support for software performance events
  alpha: Wire up missing/new syscalls

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  sata_mv: remove pointless NULL test
  pata_hpt3x2n: fix clock turnaround
  libata: fix reporting of drained bytes when clearing DRQ
  sata_mv: add power management support for the PCI controllers.
  sata_mv: store the board_idx into the host private data
  pata_octeon_cf: use resource_size(), to fix resource sizing bug
  libata: use the WRITE_SAME_16 define
  sata_mv: move the PCI bar description initialization code
  sata_mv: add power management support for the platform driver
  sata_mv: support clkdev framework
  sata_mv: increase PIO IORDY timeout

Fixed crazy mode-change in merge.

Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf session: Make events_stats u64 to avoid overflow on 32-bit arches
  hw-breakpoints: Fix hardware breakpoints -> perf events dependency
  perf events: Dont report side-band events on each cpu for per-task-per-cpu events
  perf events, x86/stacktrace: Fix performance/softlockup by providing a special frame pointer-only stack walker
  perf events, x86/stacktrace: Make stack walking optional
  perf events: Remove unused perf_counter.h header file
  perf probe: Check new event name
  kprobe-tracer: Check new event/group name
  perf probe: Check whether debugfs path is correct
  perf probe: Fix libdwarf include path for Debian

Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, irq: Allow 0xff for /proc/irq/[n]/smp_affinity on an 8-cpu system
  Makefile: Unexport LC_ALL instead of clearing it
  x86: Fix objdump version check in arch/x86/tools/chkobjdump.awk
  x86: Reenable TSC sync check at boot, even with NONSTOP_TSC
  x86: Don't use POSIX character classes in gen-insn-attr-x86.awk
  Makefile: set LC_CTYPE, LC_COLLATE, LC_NUMERIC to C
  x86: Increase MAX_EARLY_RES; insufficient on 32-bit NUMA
  x86: Fix checking of SRAT when node 0 ram is not from 0
  x86, cpuid: Add "volatile" to asm in native_cpuid()
  x86, msr: msrs_alloc/free for CONFIG_SMP=n
  x86, amd: Get multi-node CPU info from NodeId MSR instead of PCI config space
  x86: Add IA32_TSC_AUX MSR and use it
  x86, msr/cpuid: Register enough minors for the MSR and CPUID drivers
  initramfs: add missing decompressor error check
  bzip2: Add missing checks for malloc returning NULL
  bzip2/lzma/gzip: pre-boot malloc doesn't return NULL on failure

Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (25 commits)
  sched: Fix broken assertion
  sched: Assert task state bits at build time
  sched: Update task_state_arraypwith new states
  sched: Add missing state chars to TASK_STATE_TO_CHAR_STR
  sched: Move TASK_STATE_TO_CHAR_STR near the TASK_state bits
  sched: Teach might_sleep() about preemptible RCU
  sched: Make warning less noisy
  sched: Simplify set_task_cpu()
  sched: Remove the cfs_rq dependency from set_task_cpu()
  sched: Add pre and post wakeup hooks
  sched: Move kthread_bind() back to kthread.c
  sched: Fix select_task_rq() vs hotplug issues
  sched: Fix sched_exec() balancing
  sched: Ensure set_task_cpu() is never called on blocked tasks
  sched: Use TASK_WAKING for fork wakups
  sched: Select_task_rq_fair() must honour SD_LOAD_BALANCE
  sched: Fix task_hot() test order
  sched: Fix set_cpu_active() in cpu_down()
  sched: Mark boot-cpu active before smp_init()
  sched: Fix cpu_clock() in NMIs, on !CONFIG_HAVE_UNSTABLE_SCHED_CLOCK
  ...

Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sys: Fix missing rcu protection for __task_cred() access
  signals: Fix more rcu assumptions
  signal: Fix racy access to __task_cred in kill_pid_info_as_uid()

Merge branch 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  timers: Remove duplicate setting of new_base in __mod_timer()
  clockevents: Prevent clockevent_devices list corruption on cpu hotplug

* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6:
  [S390] Use strim instead of strstrip to avoid false warnings.
  [S390] qdio: add counter for input queue full condition
  [S390] qdio: remove superfluous log entries and WARN_ONs.
  [S390] ptrace: dont abuse PT_PTRACED
  [S390] cio: fix channel path vary
  [S390] drivers: Correct size given to memset
  [S390] tape: Add pr_fmt() macro to all tape source files
  [S390] rename NT_PRXSTATUS to NT_S390_HIGHREGS
  [S390] tty: PTR_ERR return of wrong pointer in fs3270_open()
  [S390] s390: PTR_ERR return of wrong pointer in fallback_init_cip()
  [S390] dasd: PTR_ERR return of wrong pointer in
  [S390] dasd: move dasd-diag kmsg to dasd
  [S390] cio: fix drvdata usage for the console subchannel
  [S390] wire up sys_recvmmsg

Several leaks in audit_tree didn't get caught by commit
318b6d3d, including the leak on normal
exit in case of multiple rules refering to the same chunk.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

... aka "Al had badly fscked up when writing that thing and nobody
noticed until Eric had fixed leaks that used to mask the breakage".

The function essentially creates a copy of old array sans one element
and replaces the references to elements of original (they are on cyclic
lists) with those to corresponding elements of new one.  After that the
old one is fair game for freeing.

First of all, there's a dumb braino: when we get to list_replace_init we
use indices for wrong arrays - position in new one with the old array
and vice versa.

Another bug is more subtle - termination condition is wrong if the
element to be excluded happens to be the last one.  We shouldn't go
until we fill the new array, we should go until we'd finished the old
one.  Otherwise the element we are trying to kill will remain on the
cyclic lists...

That crap used to be masked by several leaks, so it was not quite
trivial to hit.  Eric had fixed some of those leaks a while ago and the
shit had hit the fan...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Update to the new cs5535_mfgpt* API.  The geode-specific wording should
eventually be dropped from this driver...
Signed-off-by: NAndres Salomon <dilinger@collabora.co.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Cc: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Add a counter to the qdio performance statistics that indicates that no
free buffers were left in the input queue. If the counter gets increased
it means that the qdio adapter filled all available buffers and possibly
had more buffers ready but could not transmit them.
Signed-off-by: NJan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

* Don't write debug feature log entries for sl, slsb and sbal since these
  elements can be located from the qdio_q pointer which is also logged.
* Convert WARN_ON for wrong alignment of sbal to BUG_ON.
* Remove WARN_ON's for wrong alignment of q / qib / slib since these
  alignments should be guaranteed by kmem_cache_alloc alignment /
  struct aligned attribute / __get_free_page.
Signed-off-by: NJan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Nobody except ptrace itself should use task->ptrace or PT_PTRACED
directly, change arch/s390/kernel/traps.c to use the helper.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: NRoland McGrath <roland@redhat.com>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Channel path vary is currently broken: channel paths which are varied
offline are still used by Linux. The reason for this is that:

 * the path mask indicating which paths of an I/O device can be used
   is reset by each internal I/O request
 * the logic that checks if a path group is already in its designated
   target state incorrectly interprets the result "is correctly set"
   as "is correctly set and available"

Fix this by resetting the path mask only for internal I/O requests
which affect the path mask and by correcting the pgid check logic.
Signed-off-by: NPeter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Memset should be given the size of the structure, not the size of the pointer.

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
type T;
T *x;
expression E;
@@

memset(x, E, sizeof(
+ *
 x))
// </smpl>
Signed-off-by: NJulia Lawall <julia@diku.dk>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Without defining the pr_fmt() macro, the "tape: " prefix will not be
printed when using the pr_xxx printk macros. This patch adds the
missing definitions.
Signed-off-by: NMichael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

The elf notes number for the upper register halves is s390 specific.
Change the name of the elf notes to include S390.
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Return the PTR_ERR of the correct pointer.
Signed-off-by: NRoel Kluin <roel.kluin@gmail.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Return the PTR_ERR of the correct pointer.
Signed-off-by: NRoel Kluin <roel.kluin@gmail.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Return the PTR_ERR of the correct pointer.
Signed-off-by: NRoel Kluin <roel.kluin@gmail.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

The DIAG discipline does not have a own driver name. It shows up as
dasd-eckd or dasd-fba. So messages for dasd-diag are moved to the
generic dasd part.
Signed-off-by: NStefan Haberland <stefan.haberland@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Using dev_set_drvdata prior to device_register will force the driver core
to kmalloc its private data. Since we use this for the console subchannel
lets set the drvdata before taking the subchannels spinlock.
Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Pekka Enberg reported weird percentages in perf report. It
turns out we are overflowing a 32-bit variables in struct
events_stats on 32-bit architectures.

Before:

 [acme@ana linux-2.6-tip]$ perf report -i pekka.perf.data 2> /dev/null | head -10
   281.96%       Xorg                        b710a561  [.] 0x000000b710a561
   140.15%       Xorg  [kernel]                        [k] __initramfs_end
    51.56%   metacity  libgobject-2.0.so.0.2000.1      [.] 0x00000000026e46
    35.12%  evolution  libcairo.so.2.10800.6           [.] 0x000000000203bd
    33.84%   metacity  libpthread-2.9.so               [.] 0x00000000007a3d

After:

 [acme@ana linux-2.6-tip]$ perf report -i pekka.perf.data 2> /dev/null | head -10
    30.04%       Xorg                       b710a561   [.] 0x000000b710a561
    14.93%       Xorg  [kernel]                        [k] __initramfs_end
     5.49%   metacity  libgobject-2.0.so.0.2000.1      [.] 0x00000000026e46
     3.74%  evolution  libcairo.so.2.10800.6           [.] 0x000000000203bd
     3.61%   metacity  libpthread-2.9.so               [.] 0x00000000007a3d
Reported-by: NPekka Enberg <penberg@cs.helsinki.fi>
Tested-by: NPekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1261148583-20395-1-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>