Resolve to a function or variable if possible and if the sym option is
enabled.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1306782503-22002-1-git-send-email-dsahern@gmail.comSigned-off-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The 'sym' option displays both the function name and the DSO it comes
from. Split the display of the dso into a separate option.  This allows
display of the ip address and symbol without the dso, thus shortening
line lengths - and decluttering the output a bit.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1306528124-25861-3-git-send-email-dsahern@gmail.comSigned-off-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Currently the "sym" output field is used to dump instruction pointers
and callchain stack. Sample addresses can also be converted to symbols,
so the meaning of "sym" needs to be fixed. This patch adds an "ip"
option and if it is selected the user can also opt to dump symbols for
them. If the user opts to dump IP without syms only the address is
shown.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1306528124-25861-2-git-send-email-dsahern@gmail.comSigned-off-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Signed-off-by: NJesper Juhl <jj@chaosbits.net>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: trivial@kernel.org
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Link: http://lkml.kernel.org/r/alpine.LNX.2.00.1105261011290.17400@swampdragon.chaosbits.netSigned-off-by: NIngo Molnar <mingo@elte.hu>

Check for required sample attributes using evsel rather than sample_type
in the session header. If the attribute for a default field is not
present for the event type (e.g., new command operating on file from
older kernel) the field is removed from the output list.

Expected event types must exist. For example, if a user specifies

  -f trace:time,trace -f sw:time,cpu,sym

the perf.data file must contain both tracepoints and software events
(ie., it is an error if either does not exist in the file).

Attribute checking is done once at the beginning of perf-script rather
than for each sample.

v1 -> v2:
- addressed comments from acme

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1302148460-570-1-git-send-email-daahern@cisco.comSigned-off-by: NDavid Ahern <daahern@cisco.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Useful for getting stack traces for hardware events not handled by
PERF_TYPE_HARDWARE.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: NArun Sharma <asharma@fb.com>
Link: http://lkml.kernel.org/n/tip-qimdcdpekjqxuyqovy4kjusx@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Allow:
  perf script -f <fields>

to be equivalent to:
  perf script -f trace:<fields> -f sw:<fields> -f hw:<fields>

i.e., the specified fields apply to all event types if the type string
is not given.

The field (-f) arguments are processed in the order received. A later
usage can reset a prior request. e.g.,

  -f trace: -f comm,tid,time,sym

The first -f suppresses trace events (field list is ""), but then the second
invocation sets the fields to comm,tid,time,sym. In this case a warning is
given to the user:

  "Overriding previous field request for all events."

Alternativey, consider the order:

  -f comm,tid,time,sym -f trace:

The first -f sets the fields for all events and the second -f suppresses trace
events. The user is given a warning message about the override, and the result
of the above is that only S/W and H/W events are displayed with the given
fields.

For the 'wildcard' option if a user selected field is invalid for an event
type, a message is displayed to the user that the option is ignored for that
type. For example:

  perf script -f comm,tid,trace 2>&1 | less
  'trace' not valid for hardware events. Ignoring.
  'trace' not valid for software events. Ignoring.

Alternatively, if the type is given an invalid field is specified it is an
error. For example:

    perf script -v -f sw:comm,tid,trace 2>&1 | less
    'trace' not valid for software events.

At this point usage is displayed, and perf-script exits.

Finally, a user may not set fields to none for all event types.
i.e., -f "" is not allowed.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-kernel@vger.kernel.org
LPU-Reference: <1300377801-27246-1-git-send-email-daahern@cisco.com>
Signed-off-by: NDavid Ahern <daahern@cisco.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Resolving the sample->id to an evsel since the most advanced tools,
report and annotate, and the others will too when they evolve to
properly support multi-event perf.data files.

Good also because it does an extra validation, checking that the ID is
valid when present. When that is not the case, the overhead is just a
branch + function call (perf_evlist__id2evsel).

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Custom fields set for each type by prepending field argument with type.
For file with multiple event types (e.g., trace and S/W) display of an
event type suppressed by setting output fields to "".

e.g.,
perf record -ga -e sched:sched_switch -e cpu-clock -c 10000000 -R -- sleep 1
perf script

openssl 11496 [000]  9711.807107: cpu-clock-msecs:
        ffffffff810c22dc arch_local_irq_restore ([kernel.kallsyms])
        ffffffff810c518c __alloc_pages_nodemask ([kernel.kallsyms])
        ffffffff810297b2 pte_alloc_one ([kernel.kallsyms])
        ffffffff810d8b98 __pte_alloc ([kernel.kallsyms])
        ffffffff810daf07 handle_mm_fault ([kernel.kallsyms])
        ffffffff8138763a do_page_fault ([kernel.kallsyms])
        ffffffff81384a65 page_fault ([kernel.kallsyms])
            7f6130507d70 asn1_check_tlen (/lib64/libcrypto.so.1.0.0c)
                       0  ()

         openssl 11496 [000]  9711.808042: sched_switch: prev_comm=openssl ...
     kworker/0:0     4 [000]  9711.808067: sched_switch: prev_comm=kworker/...
         swapper     0 [001]  9711.808090: sched_switch: prev_comm=kworker/...
            sshd 11451 [001]  9711.808185: sched_switch: prev_comm=sshd pre...
swapper     0 [001]  9711.816155: cpu-clock-msecs:
        ffffffff81023609 native_safe_halt ([kernel.kallsyms])
        ffffffff8100132a cpu_idle ([kernel.kallsyms])
        ffffffff8137cf9b start_secondary ([kernel.kallsyms])

openssl 11496 [000]  9711.817104: cpu-clock-msecs:
            7f61304ad723 AES_cbc_encrypt (/lib64/libcrypto.so.1.0.0c)
            7fff3402f950  ()
        12f0debc9a785634  ()

swapper     0 [001]  9711.826155: cpu-clock-msecs:
        ffffffff81023609 native_safe_halt ([kernel.kallsyms])
        ffffffff8100132a cpu_idle ([kernel.kallsyms])
        ffffffff8137cf9b start_secondary ([kernel.kallsyms])

To suppress trace events within the file and use default output for S/W events:
perf script -f trace:

or to suppress S/W events and do default display for trace events:
perf script -f sw:

Custom field selections:
perf script -f sw:comm,tid,time -f trace:time,trace

         openssl 11496  9711.797162:
         swapper     0  9711.807071:
         openssl 11496  9711.807107:
 9711.808042: prev_comm=openssl prev_pid=11496 prev_prio=120 prev_state=R ...
 9711.808067: prev_comm=kworker/0:0 prev_pid=4 prev_prio=120 prev_state=S ...
 9711.808090: prev_comm=kworker/0:0 prev_pid=0 prev_prio=120 prev_state=R ...
 9711.808185: prev_comm=sshd prev_pid=11451 prev_prio=120 prev_state=S ==>...
         swapper     0  9711.816155:
         openssl 11496  9711.817104:
         swapper     0  9711.826155:
Acked-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <1299734608-5223-7-git-send-email-daahern@cisco.com>
Signed-off-by: NDavid Ahern <daahern@cisco.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Add option to dump symbols found in events.

e.g., perf script -f comm,pid,tid,time,trace,sym

swapper     0/0       537.037184: prev_comm=swapper prev_pid=0 prev_prio=120...
        ffffffff81030350 perf_trace_sched_switch ([kernel.kallsyms])
        ffffffff81382ac5 schedule ([kernel.kallsyms])
        ffffffff8100134a cpu_idle ([kernel.kallsyms])
        ffffffff81370b39 rest_init ([kernel.kallsyms])
        ffffffff81696c23 start_kernel ([kernel.kallsyms].init.text)
        ffffffff816962af x86_64_start_reservations ([kernel.kallsyms].init.text)
        ffffffff816963b9 x86_64_start_kernel ([kernel.kallsyms].init.text)

sshd  1675/1675    537.037309: prev_comm=sshd prev_pid=1675 prev_prio=120...
        ffffffff81030350 perf_trace_sched_switch ([kernel.kallsyms])
        ffffffff81382ac5 schedule ([kernel.kallsyms])
        ffffffff813837aa schedule_hrtimeout_range_clock ([kernel.kallsyms])
        ffffffff81383886 schedule_hrtimeout_range ([kernel.kallsyms])
        ffffffff8110c4f9 poll_schedule_timeout ([kernel.kallsyms])
        ffffffff8110cd20 do_select ([kernel.kallsyms])
        ffffffff8110ced8 core_sys_select ([kernel.kallsyms])
        ffffffff8110d00d sys_select ([kernel.kallsyms])
        ffffffff81002bc2 system_call ([kernel.kallsyms])
            7f1647e56e93 __GI_select (/lib64/libc-2.12.90.so)

netstat  1692/1692    537.038664: prev_comm=netstat prev_pid=1692 prev_prio=...
        ffffffff81030350 perf_trace_sched_switch ([kernel.kallsyms])
        ffffffff81382ac5 schedule ([kernel.kallsyms])
        ffffffff81002c3a sysret_careful ([kernel.kallsyms])
            7f7a6cd1b210 __GI___libc_read (/lib64/libc-2.12.90.so)
Acked-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <1299734608-5223-6-git-send-email-daahern@cisco.com>
Signed-off-by: NDavid Ahern <daahern@cisco.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Allow a user to select which fields to print to stdout for event data.
Options include comm (command name), tid (thread id), pid (process id),
time (perf timestamp), cpu, event (for event name), and trace (for
trace data).

Default is set to maintain compatibility with current output; this
feature does alter output format slightly -- no '-' between command
and pid/tid.

Thanks to Frederic Weisbecker for detailed suggestions on this approach.

Examples (output compressed)

1. trace, default format

perf record -ga -e sched:sched_switch
perf script

swapper    0 [000] 537.037184: sched_switch: prev_comm=swapper prev_pid=0...
   sshd 1675 [000] 537.037309: sched_switch: prev_comm=sshd prev_pid=1675...
netstat 1692 [001] 537.038664: sched_switch: prev_comm=netstat prev_pid=1692...

2. trace, custom format

perf record -ga -e sched:sched_switch
perf script -f comm,pid,time,trace     <--- omitting cpu and event name

swapper    0 537.037184: prev_comm=swapper prev_pid=0 prev_prio=120 ...
   sshd 1675 537.037309: prev_comm=sshd prev_pid=1675 prev_prio=120 ...
netstat 1692 537.038664: prev_comm=netstat prev_pid=1692 prev_prio=120 ...
Acked-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <1299734608-5223-5-git-send-email-daahern@cisco.com>
Signed-off-by: NDavid Ahern <daahern@cisco.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

This change does impact output: latency data is trace specific and is
now printed after the common data - comm, tid, cpu, time and event name.
Acked-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <1299734608-5223-4-git-send-email-daahern@cisco.com>
Signed-off-by: NDavid Ahern <daahern@cisco.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Prepare for handling of samples for any event type.
Acked-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <1299734608-5223-2-git-send-email-daahern@cisco.com>
Signed-off-by: NDavid Ahern <daahern@cisco.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

And move the event_t methods to the perf_event__ too.

No code changes, just namespace consistency.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Making the namespace more uniform.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Using %L[uxd] has issues in some architectures, like on ppc64.  Fix it
by making our 64 bit integers typedefs of stdint.h types and using
PRI[ux]64 like, for instance, git does.

Reported by Denis Kirjanov that provided a patch for one case, I went
and changed all cases.
Reported-by: NDenis Kirjanov <dkirjanov@kernel.org>
Tested-by: NDenis Kirjanov <dkirjanov@kernel.org>
LKML-Reference: <20110120093246.GA8031@hera.kernel.org>
Cc: Denis Kirjanov <dkirjanov@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Pingtian Han <phan@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Not accessed outside builtin-script, so make them static.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

That already does what was being done here. The warning is now unconditionally
given by __perf_session__process_pipe_events, just like for non pipe processing.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

If we don't use .ordering_requires_timestamps we'll end up trying to order
events with no timestamps when running on older kernels.

Problem introduced in eac23d1c.

After the last three fixes, perf scripting is back working, tested with
new perf userspace on old and new (with sample_id_all) kernels.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ian Munsie <imunsie@au1.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Torok Edwin <edwintorok@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

If we are running the new perf on an old kernel without support for
sample_id_all, we should fall back to the old unordered processing of
events. If we didn't than we would *always* process events without
timestamps out of order, whether or not we hit a reordering race. In
other words, instead of there being a chance of not attributing samples
correctly, we would guarantee that samples would not be attributed.

While processing all events without timestamps before events with
timestamps may seem like an intuitive solution, it falls down as
PERF_RECORD_EXIT events would also be processed before any samples.
Even with a workaround for that case, samples before/after an exec would
not be attributed correctly.

This patch allows commands to indicate whether they need to fall back to
unordered processing, so that commands that do not care about timestamps
on every event will not be affected. If we do fallback, this will print
out a warning if report -D was invoked.

This patch adds the test in perf_session__new so that we only need to
test once per session. Commands that do not use an event_ops (such as
record and top) can simply pass NULL in it's place.
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <1291951882-sup-6069@au1.ibm.com>
Signed-off-by: NIan Munsie <imunsie@au1.ibm.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Fix annoying compiler warning in the is_top_script() function.

The issue was that a const char * was cast into a char * to call
ends_with(). We fix the users of ends_with() instead. Some are passing a
char *, but it is okay to cast the return value of ends_with() to char *
(because we understand what ends_with() does).

Cc: David S. Miller <davem@davemloft.net>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@gmail.com>
LKML-Reference: <4cf92096.17edd80a.1540.5d60@mx.google.com>
Signed-off-by: NStephane Eranian <eranian@google.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

At perf_session__process_event, so that we reduce the number of lines in eache
tool sample processing routine that now receives a sample_data pointer already
parsed.

This will also be useful in the next patch, where we'll allow sample the
identity fields in MMAP, FORK, EXIT, etc, when it will be possible to see (cpu,
timestamp) just after before every event.

Also validate callchains in perf_session__process_event, i.e. as early as
possible, and keep a counter of the number of events discarded due to invalid
callchains, warning the user about it if it happens.

There is an assumption that was kept that all events have the same sample_type,
that will be dealt with in the future, when this preexisting limitation will be
removed.
Tested-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NIan Munsie <imunsie@au1.ibm.com>
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Ian Munsie <imunsie@au1.ibm.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <1291318772-30880-4-git-send-email-acme@infradead.org>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Free the perf trace name space and rename the trace to 'script' which is a
better match for the scripting engine.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Update usage to reflect the different perf trace variants.
Signed-off-by: NTom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net>

This patch attempts to make the perf trace command-line for live-mode
commands more user-friendly and consistent with other perf commands.

The main change it makes is to allow <commands> to be run as part of
perf trace live-mode commands, as other perf commands do, instead of
the system-wide traces they're currently hard-coded to by the shell
scripts.

With this patch, the following live-mode trace now works as expected:

 $ perf trace rw-by-pid ls -al

The previous system-wide behavior for this command would still be
available by explicitly specifying -a:

 $ perf trace rw-by-pid -a ls -al

and if no <command> is specified, the output is also system-wide:

 $ perf trace rw-by-pid

Because live-mode requires both record and report steps to be invoked,
it isn't always possible to know which args to send to the report and
which to send to the record steps - mainly this is the case for report
scripts with optional args - in those cases it would be necessary to
use separate 'perf trace record' and 'perf trace report' steps.

For example:

 $ perf trace syscall-counts ls

Here we can't decide whether ls should be passed as a param to the
syscall-counts script or whether we should invoke ls as a <command>.
In these cases, we just say that we'll ignore optional script params
and always interpret the extra arguments as a <command>.

If the user instead wants the other interpretation, that can be
accomplished by using separate record and report commands explicitly:

 $ perf trace record syscall-counts
 $ perf trace report syscall-counts ls

So the rules that this patch implements, which seem to make the most
intuitive sense for live-mode commands:

- for commands with optional args and commands with no args, no args
  are sent to the report script, all are sent to the record step

- for 'top' commands i.e. that end with 'top', <commands> can't be
  used - all extra args are send to the report script as params

- for commands with required args, the n required args are taken to be
  the first n args after the script name and sent to the report
  script, and the rest are sent to the record step
Signed-off-by: NTom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net>

Because the perf-trace shell scripts hard-coded the use of the
perf-record system-wide param, a perf trace record session was always
system wide, even if it was given a command.

If given a command, perf trace record now only records the events for
the command, as users expect.

If no command is given, or if the '-a' option is used, the recorded
events are system-wide, as before.

root@tropicana:~# perf trace record syscall-counts ls -al
root@tropicana:~# perf trace
              ls-23152 [000] 39984.890387: sys_enter: NR 12 (0, 0, 0, 0, 0, 0)
              ls-23152 [000] 39984.890404: sys_enter: NR 9 (0, 0, 0, 0, 0, 0)

root@tropicana:~# perf trace record syscall-counts -a ls -al
root@tropicana:~# perf trace
    npviewer.bin-22297 [000] 39831.102709: sys_enter: NR 168 (0, 0, 0, 0, 0, 0)
              ls-23111 [000] 39831.107679: sys_enter: NR 59 (0, 0, 0, 0, 0, 0)
Signed-off-by: NTom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net>

Free the other two fields of script_desc which somehow got overlooked,
free malloc'ed args in case exec fails, and add missing checks for
failed mallocs.
Signed-off-by: NTom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net>

We want just the script output, not internal details about the record phase.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The extension starts with the last dot in the name, not the first.

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1286723462.2955.206.camel@localhost>
Signed-off-by: NBen Hutchings <ben@decadent.org.uk>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Set $PERF_EXEC_PATH before starting the record and report scripts, and
make them use it where necessary.

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1286723403.2955.205.camel@localhost>
Signed-off-by: NBen Hutchings <ben@decadent.org.uk>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Removed duplicated #includes util/trace-event.h and
util/exec_cmd.h.
Grouped and sorted all the #includes.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <1281016299-23958-14-git-send-email-andrea.gelmini@gelma.net>
Signed-off-by: NAndrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Account and report lost events in perf trace debugging mode,
useful to check the reliability of the traces.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Tom Zanussi <tzanussi@gmail.com>

Errors due to ordering bugs are easily lost in the middle
of traces.

When we are in this mode, don't print the traces so that
we don't miss the debugging messages.
But display a comforting message if we didn't encounter any
ordering problem.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>

The events_stats.total field is too generic, rename it to .total_period,
and also add a comment explaining that it is the sum of all the .period
fields in samples, that is needed because we use auto-freq to avoid
sampling artifacts.

Ditto for events_stats.lost, that is the sum of all lost_event.lost
fields, i.e. the number of events the kernel dropped.

Looking at the users, builtin-sched.c can make use of these fields and
stop doing it again.

Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Only print the script start/stop messages in verbose mode - users
normally don't care and it just clutters up the output.

Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <1273466820-9330-7-git-send-email-tzanussi@gmail.com>
Signed-off-by: NTom Zanussi <tzanussi@gmail.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

In cbbc79a5 we introduced support for multiple events by introducing a
new "event_stat_id" struct and then made several perf_session methods
receive a point to it instead of a pointer to perf_session, and kept the
event_stats and hists rb_tree in perf_session.

While working on the new newt based browser, I realised that it would be
better to introduce a new class, "hists" (short for "histograms"),
renaming the "event_stat_id" struct and the perf_session methods that
were really "hists" methods, as they manipulate only struct hists
members, not touching anything in the other perf_session members.

Other optimizations, such as calculating the maximum lenght of a symbol
name present in an hists instance will be possible as we add them,
avoiding a re-traversal just for finding that information.

The rationale for the name "hists" to replace "event_stat_id" is that we
may have multiple sets of hists for the same event_stat id, as, for
instance, the 'perf diff' tool has, so event stat id is not what
characterizes what this struct and the functions that manipulate it do.

Cc: Eric B Munson <ebmunson@us.ibm.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Currently, perf 'live mode' writes build-ids at the end of the
session, which isn't actually useful for processing live mode events.

What would be better would be to have the build-ids sent before any of
the samples that reference them, which can be done by processing the
event stream and retrieving the build-ids on the first hit.  Doing
that in perf-record itself, however, is off-limits.

This patch introduces perf-inject, which does the same job while
leaving perf-record untouched.  Normal mode perf still records the
build-ids at the end of the session as it should, but for live mode,
perf-inject can be injected in between the record and report steps
e.g.:

perf record -o - ./hackbench 10 | perf inject -v -b | perf report -v -i -

perf-inject reads a perf-record event stream and repipes it to stdout.
At any point the processing code can inject other events into the
event stream - in this case build-ids (-b option) are read and
injected as needed into the event stream.

Build-ids are just the first user of perf-inject - potentially
anything that needs userspace processing to augment the trace stream
with additional information could make use of this facility.

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1272696080-16435-3-git-send-email-tzanussi@gmail.com>
Signed-off-by: NTom Zanussi <tzanussi@gmail.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

To ensure sample events time reordering is reliable, add a -d option
to perf trace to check that automatically.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Tom Zanussi <tzanussi@gmail.com>

Use the new generic sample events reordering from perf trace.
Before that, the displayed traces were ordered as they were
in the input as recorded by perf record (not time ordered).

This makes eventually perf trace displaying the events as beeing
time ordered.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Tom Zanussi <tzanussi@gmail.com>

Currently, live mode is invoked by explicitly invoking the
record and report sides and connecting them with a pipe e.g.

 $ perf trace record rwtop -o - | perf trace report rwtop 5 -i -

In terms of usability, it's not that bad, but it does require
the user to type and remember more than necessary.

This patch allows the user to accomplish the same thing without
specifying the separate record/report steps or the pipe.  So the
same command as above can be accomplished more simply as:

 $ perf trace rwtop 5

Notice that the '-i -' and '-o -' aren't required in this case -
they're added internally, and that any extra arguments are
passed along to the report script (but not to the record
script).

The overall effect is that any of the scripts listed in 'perf
trace -l' can now be used directly in live mode, with the
expected arguments, by simply specifying the script and args to
'perf trace'.
Signed-off-by: NTom Zanussi <tzanussi@gmail.com>
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: k-keiichi@bx.jp.nec.com
Cc: acme@ghostprotocols.net
LKML-Reference: <1270184365-8281-12-git-send-email-tzanussi@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>