The Berkshire USB-PC Watchdog driver uses a semaphore as mutex.  Use the mutex
API instead of the (binary) semaphore.
Signed-off-by: NMatthias Kaehlcke <matthias.kaehlcke@gmail.com>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>

This patch contains the scheduled removal of the i8xx_tco watchdog 
driver.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

The Marvell IDE interface on my machine would hit a BUG_ON() in
lib/iomem.c because it was calling ata_pci_init_one() specifying just a
single port on the host, but that would actually end up trying to
initialize two ports, the second one with bogus information.

This fixes "ata_pci_init_one()" so that it actually passes down the
n_ports variable that it got from the low-level driver to the host
allocation routine ("ata_host_alloc_pinfo()"), which results in the ATA
layer actually having the correct port number information.

And in order to make it all work, I also needed to fix a few places that
had incorrectly hard-coded the fact that a host always had exactly two
ports (both ata_pci_init_bmdma() and ata_request_legacy_irqs() would
just always iterate over both ports).
Acked-by: NJeff Garzik <jeff@garzik.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Almost all users of pm_ops only support mem sleep, don't check in .valid and
don't reject any others in .prepare so users can be confused if they check
/sys/power/state, especially when new states are added (these would then
result in s-t-r although they're supposed to be something different).

This patch implements a generic pm_valid_only_mem function that is then
exported for users and puts it to use in almost all existing pm_ops.
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Cc: David Brownell <david-b@pacbell.net>
Acked-by: NPavel Machek <pavel@ucw.cz>
Cc: linux-pm@lists.linux-foundation.org
Cc: Len Brown <lenb@kernel.org>
Acked-by: NRussell King <rmk@arm.linux.org.uk>
Cc: Greg KH <greg@kroah.com>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch allows a name "pppox-proto-nnn" to be used in modprobe.conf
to autoload a PPPoX protocol nnn.
Signed-off-by: NJames Chapman <jchapman@katalix.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently we scale the mempool sizes depending on memory installed
in the machine, except for the bio pool itself which sits at a fixed
256 entry pre-allocation.

There's really no point in "optimizing" this OOM path, we just need
enough preallocated to make progress. A single unit is enough, lets
scale it down to 2 just to be on the safe side.

This patch saves ~150kb of pinned kernel memory on a 32-bit box.
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Commit 404d5b18 changed the definition
of dev_dbg in the !DEBUG case from being a #define to being a static
inline.  There was code in drivers/ps3/vuart.c to do exactly that,
which fails to compile now.  This fixes it by removing the redefinition,
as the redefinition is now superfluous.
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Remove option of making booke_wdt into a kernel module. This watchdog
cannot be disabled. No point being a kernel module.
Signed-off-by: NDave Jiang <djiang@mvista.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>

  - s/Device Drivers/Controllers/
  - clarify who needs pcilynx
  - don't recommend Y for raw1394; M is typically used
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>

Fix the "attempting to setting" message in ohci1394.
Signed-off-by: NSimon Arlott <simon@fire.lp0.eu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>

Remove the unneeded code that clears, sets and again clears the
rcvPhyPkt bit in the ohci1394 LinkControl register in ohci_initialize().
Signed-off-by: NBernhard Kauer <kauer@os.inf.tu-dresden.de>
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>

If posted write failed, an "Unhandled interrupt(s) 0x00000100" message
was logged by mistake.
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>

eth1394 did not work on buses consisting of S100B...S400B hardware
because it attempted to send GASP packets at S800.
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>

This patch fixes some error handlings in eth1394:

- check return value of kmem_cache_create()
- cleanup resources if hpsb_register_protocol() fails
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (whitespace)

This patch actually doesn't change anything because there was always 0
== NETDEV_TX_OK returned before.

TODO: Return NETDEV_TX_BUSY in error case and test in different error
conditions.
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>

Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>

Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>

offset > fi->offset + fi->len - 1  ==  !(offset < fi->offset + fi->len)
offset + len - 1 < fi->offset      ==  !(offset + len > fi->offset)
!(A || B)  ==  (!A && !B)
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>

Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>

We can't reconfigure the MAC address, hence we don't need the callback.
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>

because CONFIG_IEEE1394_ETH1394 depends on it.
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>

RFC 2734 says: "IP-capable nodes may operate with an MTU size larger
than the default [1500 octets], but the means by which a larger MTU is
configured are beyond the scope of this document."

Allow users to set an MTU bigger than 1500.
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>

highlevel_host_reset no longer has any modular users.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>

Call only eth1394's own host reset handler from .tx_timeout, not the
reset hooks of all other IEEE 1394 drivers.

A minor drawback of this patch is that ether1394_host_reset by timeout
is not serialized against ether1394_host_reset by bus reset.
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>

Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>

The old argument calculated the correct value in a wrong way.
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>

Move common code into an extra function.  This implicitly adds a missing
node_info->fifo = CSR1212_INVALID_ADDR_SPACE; to .update.
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>

Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>

Adjust white space and line wraps.  Remove unnecessary parentheses and
braces, unused macros, and some of the more redundant comments.
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>

There is some common code between ether1394_open and ether1394_add_host
which can be moved to a separate helper function for a slightly smaller
eth1394 driver (-160 bytes on i386.)
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>

Until now, ieee1394 put an IP-over-1394 capability entry into each new
host's config ROM.  As soon as the controller was initialized --- i.e.
right after modprobe ohci1394 --- this entry triggered a hotplug event
which typically caused auto-loading of eth1394.

This irritated or annoyed many users and distributors.  Of course they
could blacklist eth1394, but then ieee1394 wrongly advertized IP-over-
1394 capability to the FireWire bus.

Therefore
  - remove the offending kernel config option
    IEEE1394_CONFIG_ROM_IP1394,
  - let eth1394 add the ROM entry by itself, i.e. only after eth1394 was
    loaded.

This fixes http://bugzilla.kernel.org/show_bug.cgi?id=7793 .

To emulate the behaviour of older kernels, simply add the following to
to /etc/modprobe.conf:

install ohci1394 /sbin/modprobe eth1394; \
                 /sbin/modprobe --ignore-install ohci1394

Note, autoloading of eth1394 when an _external_ IP-over-1394 capable
device is discovered is _not_ affected by this patch.
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>

Shrinks eth1394.ko by about 5%.

Many of these functions have only one caller and are therefore auto-
inlined anyway.
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>

ether1394_add_host() guarantees that hi->dev != NULL if hi != NULL.
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>

Warn if hpsb_allocate_and_register_addrspace() failed.
Unregister the address space if something else failed.
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>

The comment says it all.  This affects only asynchronous streams sent
via raw1394; the eth1394 driver has own code and needs an own fix.
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>

SPIN_LOCK_UNLOCKED cleanup,use DEFINE_SPINLOCK instead
Signed-off-by: NMilind Arun Choudhary <milindchoudhary@gmail.com>
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>

Shrinks object file size a little bit.
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>

Everytime when eth1394 or a libraw1394 client updates the configuration
ROM, a certain sysfs attribute cannot be added since it already exists.
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>

This is a coding style touch-up for ieee1394's handle_incoming_packet().

A preprocessor macro contained hardwired variable names and, even worse,
the 'break' keyword.  This macro is now unrolled and removed.

Also, all 'break's which had the effect of a return are replaced by
return.  And a FIXME comment is brought up to date.
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>