Should probably just init this in the GMbus code all the time, based on
the cdclk and HPLL like we do on newer platforms.  Ville has code for
that in a rework branch, but until then we can fix this bug fairly
easily.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76301Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: NNikolay <mar.kolya@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

We may be hidding bugs by doing that, so let remove it and have the
actual mask value shine through, for better or worse.
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

While trying to unify the order of those arguments throughout the
driver, Daniel noticed what we were inverting them in this part of the
code.
Suggested-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

I was playing with clang and oh surprise! a warning trigerred by
-Wshift-overflow (gcc doesn't have this one):

    WA_SET_BIT_MASKED(GEN7_GT_MODE,
                      GEN6_WIZ_HASHING_MASK | GEN6_WIZ_HASHING_16x4);

    drivers/gpu/drm/i915/intel_ringbuffer.c:786:2: warning: signed shift result
      (0x28002000000) requires 43 bits to represent, but 'int' only has 32 bits
      [-Wshift-overflow]
        WA_SET_BIT_MASKED(GEN7_GT_MODE,
        ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    drivers/gpu/drm/i915/intel_ringbuffer.c:737:15: note: expanded from macro
      'WA_SET_BIT_MASKED'
        WA_REG(addr, _MASKED_BIT_ENABLE(mask), (mask) & 0xffff)

Turned out GEN6_WIZ_HASHING_MASK was already shifted by 16, and we were
trying to shift it a bit more.

The other thing is that it's not the usual case of setting WA bits here, we
need to have separate mask and value.

To fix this, I've introduced a new _MASKED_FIELD() macro that takes both the
(unshifted) mask and the desired value and the rest of the patch ripples
through from it.

This bug was introduced when reworking the WA emission in:

  Commit 7225342a
  Author: Mika Kuoppala <mika.kuoppala@linux.intel.com>
  Date:   Tue Oct 7 17:21:26 2014 +0300

      drm/i915: Build workaround list in ring initialization

v2: Invert the order of the mask and value arguments (Daniel Vetter)
    Rewrite _MASKED_BIT_ENABLE() and _MASKED_BIT_DISABLE() with
    _MASKED_FIELD() (Jani Nikula)
    Make sure we only evaluate 'a' once in _MASKED_BIT_ENABLE() (Dave Gordon)
    Add check to ensure the value is within the mask boundaries (Chris Wilson)

v3: Ensure the the value and mask are 16 bits (Dave Gordon)

Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Arun Siluvery <arun.siluvery@linux.intel.com>
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

Apparently stuff works that way on those machines.

I agree with Chris' concern that this is a bit risky but imo worth a
shot in -next just for fun. Afaics all these machines have the pci
resources allocated like that by the BIOS, so I suspect that it's all
ok.

This regression goes back to

commit eaba1b8f
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Thu Jul 4 12:28:35 2013 +0100

    drm/i915: Verify that our stolen memory doesn't conflict

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76983
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=71031Tested-by: Nlu hua <huax.lu@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Tested-by: NPaul Menzel <paulepanter@users.sourceforge.net>
Cc: stable@vger.kernel.org
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

Otherwise the MST resume paths can hit DPMS paths
which hit state checker paths, which hit WARN_ON,
because the state checker is inconsistent with the
hw.

This fixes a bunch of WARN_ON's on resume after
undocking.
Signed-off-by: NDave Airlie <airlied@redhat.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

So apparently jiffies<->nsec<->ktime isn't accurate or something. At
elast if we timeout there's occasionally still a few hundred us left
(in a 2 second timeout).

Stuff I've tried and thrown out again:
- Sampling the before timestamp before jiffies. Doesn't improve test
  path rate at all.
- Using jiffies. Way to inaccurate, which means way too much drift
  with signals plus automatic ioctl restarting in userspace. In
  hindsight we should have used an absolute timeout, but hey we need
  something for v3 of the i915 gem wait interfaces ;-)
- Trying to figure out where accuracy gets lost. gl testcase really
  don't care all that much about this (as long as isn't not massively
  off), it's just that the testcase gets a bit upset if it receives an
  EITME with timeout > 0.

So as long as we're in the ballbark it's good enough. So patch
everything up if we're at most one jiffies off. I get's me a solid
test again.

This regression is probably introduced in

commit 5ed0bdf2
Author: Thomas Gleixner <tglx@linutronix.de>
Date:   Wed Jul 16 21:05:06 2014 +0000

    drm: i915: Use nsec based interfaces

    Use ktime_get_raw_ns() and get rid of the back and forth timespec
    conversions.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>

Probably because I'm too lazy to confirm myself and still waiting for
QA ;-)

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=82749Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

We've lost the +1 required for correct timeouts in

commit 5ed0bdf2
Author: Thomas Gleixner <tglx@linutronix.de>
Date:   Wed Jul 16 21:05:06 2014 +0000

    drm: i915: Use nsec based interfaces

    Use ktime_get_raw_ns() and get rid of the back and forth timespec
    conversions.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>

So fix this up by reinstating our handrolled _timeout function. While
at it bother with handling MAX_JIFFIES.

v2: Convert to usecs (we don't care about the accuracy anyway) first
to avoid overflow issues Dave Gordon spotted.

v3: Drop the explicit MAX_JIFFY_OFFSET check, usecs_to_jiffies should
take care of that already. It might be a bit too enthusiastic about it
though.

v4: Chris has a much nicer color, so use his implementation.

This requires to export nsec_to_jiffies from time.c.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Dave Gordon <david.s.gordon@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=82749
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Acked-by: NJohn Stultz <john.stultz@linaro.org>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

Partial revert of

commit 20664591
Author: Jesse Barnes <jbarnes@virtuousgeek.org>
Date:   Wed Nov 5 14:26:09 2014 -0800

    drm/i915: check for audio and infoframe changes across mode sets v2

References: https://bugs.freedesktop.org/show_bug.cgi?id=86683Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Tested-by: NLi Xu <li.l.xu@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

On pre-HSW we have two encoders per digital port: one HDMI, one DP.
However they are the same physical port in hardware and we can't enable
both at the same time. Reject the modeset if the user attempts this.

So far we've been saved by the fact that we never see both HDMI and DP
connectors as connected. But if the user decides to force a mode anyway,
all kinds of funny stuff might happen.

Unfortunately we don't seem to have any way to inform userspace that
such configurations are invalid except by returning an error from
setcrtc. possible_clones only covers real cloning situations, and
looking at the connector names doesn't work either since we don't
always register both connectors for the same port. I suppose the
only way to fix that would be to expose only a single encoder per
digital port like we do on HSW+ but that would be a fairly large
undertaking for little gain.

kms_setmode hits this since it forces modes on non-connected VGA and
HDMI connectors. Previosuly it just resulted in weirdness such as
failed link training. With this patch it will now get an error back
from the kernel and will die with an assert since it thinks that the
configuration should be fine.

v2: Deal with INTEL_OUTPUT_UNKNOWN (Paulo)

Cc: Paulo Zanoni <przanoni@gmail.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Atm, igt/gem_reset_stats can trigger the recently added WARN on
left-over PM_IIR bits in gen6_enable_rps_interrupts(). There are two
reasons for this:
1. we call intel_enable_gt_powersave() without a preceeding
   intel_disable_gt_powersave()
2. gen6_disable_rps_interrupts() doesn't mask interrupts in PM_IMR

1. means RPS interrupts will remain enabled and can be serviced during
the HW initialization after a GPU reset. 2. means even if we called
gen6_disable_rps_interrupts() any new RPS interrupt during RPS
initialization would still propagate to PM_IIR too early (though
wouldn't be serviced).

This patch solves the 2. issue by also masking interrupts in PM_IMR, the
following patch fixes 1. getting rid of the WARN. This also makes
intel_enable_gt_powersave() and intel_disable_gt_powersave() more
symmetric.

Since gen6_disable_rps_interrupts() is called during driver loading with
i915 interrupts disabled add a new version of gen6_disable_pm_irq() that
doesn't WARN for this.

Also while at it, get the irq_lock around the whole PM_IMR/IER/IIR
programming sequence and make sure that any queued PM_IIR bit is also
cleared.

The WARN was caught by PRTS after I sent my previous RPS sanitizing
patchset and I could easily reproduce it on HSW. To actually fix it we
also need the next patch.
Reported-by: NHe, Shuang <shuang.he@intel.com>
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We don't really synchronously turn them off from debugfs. We try to
avoid hitting them too badly by waiting one vblank, but apparently the
irq handler can still race through that gap.

Since this isn't really all that important for testcases, only for
debugging CRC issues let's tune it down to a debug message.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=82602
Cc: Damien Lespiau <damien.lespiau@intel.com>
Acked-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>

Dynamic context pinning for LRCs introduced a leak in legacy mode.
Reinstate context unreference in i915_gem_free_request for legacy contexts.

Leak reported by i-g-t/drv_module_reload fixed by this patch.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=86507Signed-off-by: NThomas Daniel <thomas.daniel@intel.com>
Reviewed-by: John Harrison<John.C.Harrison@Intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Updates in forcewake range for Render/Media/Common
power wells for Gen9.
Signed-off-by: NAkash Goel <akash.goel@intel.com>
Signed-off-by: NZhe Wang <zhe1.wang@intel.com>
Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Before testing if the panel VDD is enabled on eDP cancel any pending
disable worker. This makes sure the worker will be triggered with a
delay from the last time edp_panel_vdd_schedule_off() is called, not
the first time. This avoids unnecessary overhead.

https://bugs.freedesktop.org/show_bug.cgi?id=86201

v2: use cancel_delayed_work() instead of cancel_delayed_work_sync()
as the pps_mutexes will provide the required serialization with
edp_panel_vdd_work() while the sync variant may deadlock. Suggested
by Ville Syrjälä <ville.syrjala@linux.intel.com>.
Made commit message a bit clearer.
Signed-off-by: NEgbert Eich <eich@suse.de>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The crc code doesn't handle anything really that could drop the
register state (by design so that we have less complexity). Which
means userspace may only start crc capture once the pipe is fully set
up.

With an i-g-t patch this will be the case, but there's still the
problem that this results in obscure unclaimed register write
failures. Which is a pain to debug.

So instead make sure we don't have the basic unclaimed register write
failure by grabbing runtime pm references. And reject completely
invalid requests with -EIO. This is still racy of course, but for a
test library we don't really care - if userspace shuts down the pipe
right afterwards the entire setup will be lost anyway.

v2: Put instead of get, spotted by Damien. Also explain the runtime pm
dance.

v3: There's really no need for rpm get/put since power_is_enabled only
checks software state (Damien).

References: https://bugs.freedesktop.org/show_bug.cgi?id=86092
Cc: Damien Lespiau <damien.lespiau@intel.com> (v2)
Tested-by: Nlu hua <huax.lu@intel.com>
Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>

The GPU reset also resets the display on gen3/4. The g33 docs say we
should disable all planes before flipping the reset switch. Just
disable all the crtcs instead. That seems a nicer thing to do anyway.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

On gen4 and earlier the GPU reset also resets the display, so we should
protect against concurrent modeset operations. Grab all the modeset locks
around the entire GPU reset dance, remebering first ti dislogde any
pending page flip to make sure we don't deadlock. Any pageflip coming
in between these two steps should fail anyway due to reset_in_progress,
so this should be safe.

This fixes a lot of failed asserts in the modeset code when there's a
modeset racing with the reset. Naturally the asserts aren't happy when
the expected state has disappeared.

v2: Drop UMS checks, complete pending flips after the reset (Daniel)

Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

g33 seems to sit somewhere between the 915/945/965 style and the
g4x style. The bits look like g4x, but we still need to do a full
reset including display.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

915/945 have the same reset registers as 965, so share the code.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

On pre-ctg GPU reset also resets the display hardware. Force a mode
restore after the GPU reset, and also re-init clock gating.

v2: Use intel_modeset_init_hw() instead of intel_init_clock_gating()
    in case more relevant stuff gets added there at some point
    Restore interrupts after the reset as well
Tested-by: NKenneth Graunke <kenneth@whitecape.org>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

On pre-ctg the reset bit directly controls the reset signal. We must
assert it for >=20usec and then deassert it. Bit 1 is a RO status bit
which should also go down when the reset is no longer asserted.
Tested-by: NKenneth Graunke <kenneth@whitecape.org>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

There's quite a few bug reports with error states where the error
reasons makes just about no sense at all. Like dying on tlbs for a
display plane that's not even there. Also users don't really report a
lot of bad side effects generally, just the error states.

Furthermore we don't even enable these interrupts any more on gen5+
(though the handling code is still there). So this mostly concerns old
platforms.

Given all that lets make our lives a bit easier and stop capturing
error states, in the hopes that we can just ignore them. In case
that's not true and the gpu indeed dies the hangcheck should
eventually kick in. And I've left some debug log in to make this case
noticeble. Referenced bug is just an example.

v2: Fix missing \n Jani spotted.

References: https://bugs.freedesktop.org/show_bug.cgi?id=82095
References: https://bugs.freedesktop.org/show_bug.cgi?id=85944Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The problem here is that SNA pins batchbuffers to etch out a bit more
performance. Iirc it started out as a w/a for i830M (which we've
implemented in the kernel since a long time already). The problem is
that the pin ioctl wasn't added in

commit d23db88c
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Fri May 23 08:48:08 2014 +0200

    drm/i915: Prevent negative relocation deltas from wrapping

Fix this by simply disallowing pinning from userspace so that the
kernel is in full control of batch placement again. Especially since
distros are moving towards running X as non-root, so most users won't
even be able to see any benefits.

UMS support is dead now, but we need this minimal patch for
backporting. Follow-up patch will remove the pin ioctl code
completely.

Note to backporters: You must have both

commit b45305fc
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Mon Dec 17 16:21:27 2012 +0100

    drm/i915: Implement workaround for broken CS tlb on i830/845

which laned in 3.8 and

commit c4d69da1
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Mon Sep 8 14:25:41 2014 +0100

    drm/i915: Evict CS TLBs between batches

which is also marked cc: stable. Otherwise this could introduce a
regression by disabling the userspace w/a without the kernel w/a being
fully functional on i830/45.

References: https://bugs.freedesktop.org/show_bug.cgi?id=76554#c116
Cc: stable@vger.kernel.org # requires c4d69da1 and v3.8
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>

In all likelihood we will do a few hundred errnoneous register
operations if we do a single invalid register access whilst the device
is suspended. As each instance causes a WARN, this floods the system
logs and can make the system unresponsive.

The warning was first introduced in
commit b2ec142c
Author: Paulo Zanoni <paulo.r.zanoni@intel.com>
Date:   Fri Feb 21 13:52:25 2014 -0300

    drm/i915: call assert_device_not_suspended at gen6_force_wake_work

and despite the claims the WARN is still encountered in the wild today.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

CHV infoframes were not being enabled.
Signed-off-by: NClint Taylor <clinton.a.taylor@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

When doing a nop modeset we currently leave crtc->new_config point at
the already freed temporary pipe_config. That will anger the sanity
checks in intel_modeset_update_state() when the nop modeset gets
followed by a GPU reset on gen3/4 where the display block gets fully
reinitialized during the reset.

So leave crtc->new_config alone until we know a modeset is actually
required.

Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The DRM connector's encoder pointer is managed internally by the DRM
core and set to NULL when the DRM connector is disconnected from the
CRTC it was attached to. This results in a NULL pointer dereference in
the HDMI connector functions when trying to call the associated slave
encoder's operations.

Fix this by retrieving the slave encoder pointer from the R-Car
connector structure instead of the DRM connector structure.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

LRC object does not need to be mapped into the GGTT when dumping. A side-effect
of this patch is that a compiler warning goes away (not checking return value
of i915_gem_obj_ggtt_pin).

v2: Broke out individual context dumping into a new function as the indentation
was getting a bit crazy.  Added notification of contexts with no gem object for
debugging purposes.  Removed unnecessary pin_pages and unpin_pages, replaced
with explicit get_pages for the context object as there may be no backing store
allocated at this time (Comment for get_pages says "Ensure that the associated
pages are gathered from the backing storage and pinned into our object").
Improved error checking - get_pages and get_page are checked for failure.
Signed-off-by: NThomas Daniel <thomas.daniel@intel.com>
[danvet: Align paramter continuation lines properly. Also add some
braces to the nested loops again for readability.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We'll move them at pin() time if necessary.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Preparation for transition to planes, which use framebuffers for the
cursor image.  We've always done copies from the userspace buffer up
until now for legacy reasons, there's no good reason to do so on the
chipsets this code covers.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

We have the ability to move buffers around in the kernel if necessary,
and should probably use it rather than failing if userspace passes us
a non-contig buffer for a plane.

The NOUVEAU_GEM_TILE_NONCONTIG flag from userspace will become a mere
initial placement hint once all the relevant paths have been updated.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

The voltage value are calculated by the hardware characterized
result.
Signed-off-by: NVince Hsu <vinceh@nvidia.com>
Reviewed-by: NAlexandre Courbot <acourbot@nvidia.com>
Acked-by: NMartin Peres <martin.peres@free.fr>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

For GK20A we need the GPU speedo value to calculate voltage levels.
Signed-off-by: NVince Hsu <vinceh@nvidia.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Move the vbios parsing out of init() and call it conditionally if the
platform has a vbios. Non-vbios platforms can use the ctor() to init the
data structures.
Signed-off-by: NVince Hsu <vinceh@nvidia.com>
Acked-by: NAlexandre Courbot <acourbot@nvidia.com>
Acked-by: NMartin Peres <martin.peres@free.fr>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

This allows the module to load without acceleration.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

A machine has been spotted where the ramcfg strap is "8", and the ramcfg
xlat table goes 0-7,0-7, resulting in us selecting config 0 for memory
items.  On this particular system, config "8" is available and supposed
to be used.  It appears that starting from GT21x (where Mv2 appears),
we're supposed to use the value in this table instead.

One concern here is that not all the places we currently use ramcfg xlat
are supposed to be treated the same now.  The strap xlat table wasn't
removed from the vbios either, presumably for some kind of good reason.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>