external modules needs include/linux/autoconf.h and include/config/auto.conf
but skip the integrity test of these. Even with a newer Kconfig file we
shall just proceed since external modules simply uses the kernel source and
shall not attempt to modify it.
Error out if a config fiel is missing since they are mandatory.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

Ubuntu gcc has hardcoded -fstack-protector - but does not understand
-fno-stack-protector-all. So only try -fno-stack-protector.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

Finishing up for the kernel summit. Ottawa, here I come.
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

It's all good.

Fix a typo in the toplevel makefile.
Signed-off-by: NAndreas Schwab <schwab@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

include/linux/version.h contained both actual KERNEL version
and UTS_RELEASE that contains a subset from git SHA1 for when
kernel was compiled as part of a git repository.
This had the unfortunate side-effect that all files including version.h
would be recompiled when some git changes was made due to changes SHA1.
Split it out so we keep independent parts in separate files.

Also update checkversion.pl script to no longer check for UTS_RELEASE.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

Ubuntu has enabled -fstack-protector per default in gcc
breaking kernel build. Explicit turn it off for now.
Later we may decide to make it configurable if the
kernel starts to support it.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

Minor documentation change on allowing checkers besides sparse

This patch cleans up a couple of mentions of sparse in the inline
toplevel Makefile documentation such that it's clear that other checkers
besides sparse can override CHECK and CHECKFLAGS.
Signed-off-by: NDustin Kirkland <dustin.kirkland@us.ibm.com>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

kbuild used $¤(*F to get filename of target without extension.
This was used in several places all over kbuild, but introducing
make -rR broke his for all cases where we specified full path to
target/prerequsite. It is assumed that make -rR disables old style
suffix-rules which is why is suddenly failed.

ia64 was impacted by this change because several div* routines in
arch/ia64/lib are build using explicit paths and then kbuild failed.

Thanks to David Mosberger-Tang <David.Mosberger@acm.org> for an explanation
what was the root-cause and for testing on ia64.

This patch also fixes two uses of $(*F) in arch/um
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

I'm using TAGS generated from "make TAGS" to read the kernel source code.

When I met a ifdef block

	  #ifdef CONFIG_FOO
	  	 ...
	  #endif

in the soruce code I would like to know the meaning CONFIG_FOO
to decide whether I should read inside the ifdef block
or not. meaning CONFIG_FOO is well documented in Kconfig.
So it is nice if I can jump to CONFIG_FOO entry in Kconfig
from "#ifdef CONFIG_FOO" with the tag jump.

Here is the patch to add symbols in Kconfig and defconfig to TAGS
in "make TAGS" operation.
Signed-off-by: NMasatake YAMATO <jet@gyve.org>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

Here is a patch that adds a new -T option to genksyms for generating dumps of
the type definition that makes up the symbol version hashes. This allows to
trace modversion changes back to what caused them. The dump format is the
name of the type defined, followed by its definition (which is almost C):

  s#list_head struct list_head { s#list_head * next , * prev ; }

The s#, u#, e#, and t# prefixes stand for struct, union, enum, and typedef.
The exported symbols do not define types, and thus do not have an x# prefix:

  nfs4_acl_get_whotype int nfs4_acl_get_whotype ( char * , t#u32 )

The symbol type defintion of a single file can be generated with:

  make fs/jbd/journal.symtypes

If KBUILD_SYMTYPES is defined, all the *.symtypes of all object files that
export symbols are generated.

The single *.symtypes files can be combined into a single file after a kernel
build with a script like the following:

for f in $(find -name '*.symtypes' | sort); do
    f=${f#./}
    echo "/* ${f%.symtypes}.o */"
    cat $f
    echo
done \
| sed -e '\:UNKNOWN:d' \
      -e 's:[,;] }:}:g' \
      -e 's:\([[({]\) :\1:g' \
      -e 's: \([])},;]\):\1:g' \
      -e 's: $::' \
      $f \
| awk '
/^.#/   { if (defined[$1] == $0) {
            print $1
            next
          }
          defined[$1] = $0
        }
        { print }
'

When the kernel ABI changes, diffing individual *.symtype files, or the
combined files, against each other will show which symbol changes caused the
ABI changes. This can save a tremendous amount of time.

Dump the types that make up modversions
Signed-off-by: NAndreas Gruenbacher <agruen@suse.de>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

kconfig-fix-config-dependencies causes this:

make CC=cc  KBUILD_VERBOSE=1 -C /usr/src/25 SUBDIRS=/home/akpm/NVIDIA-Linux-x86_64-1.0-8762-pkg2/usr/src/nv modules
make -f /usr/src/devel/Makefile silentoldconfig
make -f /usr/src/devel/Makefile silentoldconfig
make -f /usr/src/devel/Makefile silentoldconfig

The basic problem is if we compile external modules, config-targets isn't
set which can cause recursive calls to silentoldconfig to update the
kernel configuration.

Bail out and ask the user to update manually.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

Add option for stripping modules while installing them.

This function adds support for stripping modules while they are being
installed.  CONFIG_DEBUG_KERNEL (which will probably become more
popular as developers use kdump) causes the size of the installed
modules to grow by a factor of 9 or so.

Some kernel package systems solve this problem by stripping the debug
information from /lib/modules after running "make modules_install",
but that may not work for people who are installing directly into
/lib/modules --- root partitions that were sized to handle 16 megs
worth of modules may not be quite so happy with 145 megs of modules,
so the "make modules_install" never succeeds.

This patch allows such users to request modules_install to strip the
modules as they are installed.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

Based on the 'headers_install' target, this performs a basic sanity check
on the exported headers -- so far only checking that they do not include
any other headers which aren't selected for import, but easily extendable.
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

This adds a make target which exports a subset of headers which contain
definitions which are useful for system libraries and tools. It uses the
BSD 'unifdef' tool to remove instances of #ifdef __KERNEL__, and uses
sed to remove markers like __user.

Based on an original implementation by Arnd Bergmann <arnd@arndb.de>
Hacked about by David Woodhouse <dwmw2@infradead.org>
Reviewed and cleaned up by Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

Being named "Crazed Snow-Weasel" instills a lot of confidence in this
release, so I'm sure this will be one of the better ones.

kbuild does explicitly specify what to do in all cases, and each
time make's built-in rules & variables has been used it has been a bug.
So to speed up things and to avoid the hard-to-debug error situations
ignore the built-in definitions.
If any part of the kernel uses the built-in definitions the build will
just stop there and it should be trivial to fix.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

The binrpm-pkg target uses KERNELRELEASE when generated its .spec file.
When binrpm-pkg was the first build target run in a tree it generated the
.spec before kernel.release so the Version: tag in the .spec was empty.

I don't know if this is the best fix, but binrpm-pkg works when we
explicitly build kernel.release before descending into package-dir.
Signed-off-by: NZach Brown <zach.brown@oracle.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

If you set KCONFIG_OVERWRITECONFIG in environment, Kconfig will not break
symlinks when .config is a symlink to somewhere else.
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

This moves the .kernelrelease file into include/config directory.  Remove its
generation from the config step, if the config step doesn't leave a proper
.config behind, it triggers a call to silentoldconfig.  Instead its generation
can be done via proper dependencies.
Signed-off-by: NRoman Zippel <zippel@linux-m68k.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

Now that kconfig can load multiple configurations, it becomes simple to
integrate the split config step, by simply comparing the new .config file with
the old auto.conf (and then saving the new auto.conf).  A nice side effect is
that this saves a bit of disk space and cache, as no data needs to be read
from or saved into the splitted config files anymore (e.g.  include/config is
now 648KB instead of 5.2MB).
Signed-off-by: NRoman Zippel <zippel@linux-m68k.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

This fixes one of the worst kbuild warts left - the broken dependencies used
to check and regenerate the .config file.  This was done via an indirect
dependency and the .config itself had an empty command, which can cause make
not to reread the changed .config file.

Instead of this we generate now a new file include/config/auto.conf from
.config, which is used for kbuild and has the proper dependencies.  It's also
the main make target now for all files generated during this step (and thus
replaces include/linux/autoconf.h).

This also means we can now relax the syntax requirements for the .config file
and we don't have to rewrite it all the time, i.e.  silentoldconfig only
writes .config now when it's necessary to keep it in sync with the Kconfig
files and even this can be suppressed by setting the environment variable
KCONFIG_NOSILENTUPDATE, so the update can (and must) be done manually.
Signed-off-by: NRoman Zippel <zippel@linux-m68k.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

Change the conditional of the outputmakefile rule to be evaluated entirely
in make, and add a conditional to not touch the generated makefile when e.g.
running 'make install' as root while the build was done as non-root. Also
adjust the comment describing this, and move the message printing and
redirection to mkmakefile.
Signed-off-by: NJan Beulich <jbeulich@novell.com>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

Remove *.mod files but not .tmp_versions for external builds

When "make install" is run as root, .tmp_versions is re-created and
becomes owned by root.  Subsequent "make" run by user fails because
.tmp_versions cannot be removed.
Signed-off-by: NPavel Roskin <proski@gnu.org>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

When installing external modules with `make modules_install', the
first thing that happens is a rm -rf of the target directory. This
works only once, and breaks when installing more than one (set of)
external module(s).
With following fix we have the functionality:
- for a in-kernel modules_install the $(MODLIB)/kernel directory will be
  deleted before module installation
- for external modules the existing modules will be left as is assuming
  one may be building and installign several external modules
Signed-off-by: NAndreas Gruenbacher <agruen@suse.de>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

kbuild added an extra '/' after the directory - resulting in all
files being rebuild in a subdirectory.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

This fixes single targets build so it now works relaiably in
following cases:
- build with mixed kernel source and output files (make single-target)
- build with separate output directory (make O=.. single-target)
- external module with mixed kernel source and output files
  (make M='pwd' single-target)
- external module with separate kernel source and output files
  (make O=.. M='pwd' single-target)
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

Close of the merge window..

gcc should handle this anyways, and it causes problems when
sprintf is turned into strcpy by gcc behind our backs and
the C fallback version of strcpy is actually defining __builtin_strcpy

Then drop -ffreestanding from the main Makefile because it isn't
needed anymore and implies -fno-builtin, which is wrong now.
(it was only added for x86-64, so dropping it should be safe)

Noticed by Roman Zippel

Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

As a foundation for reliable stack unwinding, this adds a config option
(available to all architectures except IA64 and those where the module
loader might have problems with the resulting relocations) to enable the
generation of frame unwind information.
Signed-off-by: NJan Beulich <jbeulich@novell.com>
Cc: Miles Bader <uclinux-v850@lsi.nec.co.jp>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Paul Mundt <lethal@linux-sh.org>,
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The checks performed by scripts/reference_* has been moved to modpost.
Remove the files and their reference in top-level Makefile.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>