Alex Lyakas reported a bug where wait_block_group_cache_progress() would wait
forever if a drive failed.  This is because we just bail out if there is an
error while trying to cache a block group, we don't update anybody who may be
waiting.  So this introduces a new enum for the cache state in case of error and
makes everybody bail out if we have an error.  Alex tested and verified this
patch fixed his problem.  This fixes bz 59431.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

Before applying this patch, we cached the csum value into the extent state
tree when reading some data from the disk, this operation increased the lock
contention of the state tree.

Now, we just store the csum value into the bio structure or other unshared
structure, so we can reduce the lock contention.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

Some codes still use the cpu_to_lexx instead of the
BTRFS_SETGET_STACK_FUNCS declared in ctree.h.

Also added some BTRFS_SETGET_STACK_FUNCS for btrfs_header btrfs_timespec
and other structures.
Signed-off-by: NQu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: NMiao Xie <miaoxie@cn.fujitsu.com>
Reviewed-by: NDavid Sterba <dsterba@suse.cz>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

I recently did some ENOSPC testing that involved filling the disk
while create and removing snapshots in a loop. During the test cycle,
I ran into an ENOSPC when trying to remove a snapshot, leaving the fs
stuck in ENOSPC even after a umount/mount cycle.

This patch allow subvolume removal to fall back onto the global
block reservation in order to succeed when it would have failed
otherwise.
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

We always just try and reserve data space when we write, but if we are out of
space but have prealloc'ed extents we should still successfully write.  This
patch will try and see if we can write to prealloc'ed space and if we can go
ahead and allow the write to continue.  With this patch we now pass xfstests
generic/274.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

There are all of these checks in the ENOSPC code to see if committing the
transaction would free up enough space to make the allocation.  This is because
early on we just committed the transaction and hoped and prayed, which resulted
in cases where it took _forever_ to get an ENOSPC when we really were out of
space.  So we check space_info->bytes_pinned, except this isn't completely true
because it doesn't account for space we may free but are stuck in delayed refs.
So tests like xfstests 226 would fail because we wouldn't commit the transaction
to free up the data space.  So instead add a percpu counter that will be a
little fuzzier, it will add bytes as soon as we try to free up the space, and
remove any space it doesn't actually free up when we get around to doing the
actual free.  We then 0 out this counter every transaction period so we have a
better idea of how much space we will actually free up by committing this
transaction.  With this patch we now pass xfstests 226.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

Dave has this fs_mark script that can make btrfs abort with sufficient amount of
ram.  This is because with more ram we can keep more dirty metadata in cache
which in a round about way makes for many more pending delayed refs.  What
happens is we end up not throttling the transaction enough so when we go to
commit the transaction when we've completely filled the file system we'll
abort() because we use all of the space in the global reserve and we still have
delayed refs to run.  To fix this we need to make the delayed ref flushing and
the transaction throttling dependant upon the number of delayed refs that we
have instead of how much reserved space is left in the global reserve.  With
this patch we not only stop aborting transactions but we also get a smoother run
speed with fs_mark and it makes us about 10% faster.  Thanks,
Reported-by: NDavid Sterba <dsterba@suse.cz>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

With non-mixed block groups we replay the logs before we're allowed to do any
writes, so we get away with not pinning/removing the data extents until right
when we replay them.  However with mixed block groups we allocate out of the
same pool, so we could easily allocate a metadata block that was logged in our
tree log.  To deal with this we just need to notice that we have mixed block
groups and do the normal excluding/removal dance during the pin stage of the log
replay and that way we don't allocate metadata blocks from areas we have logged
data extents.  With this patch we now pass xfstests generic/311 with mixed
block groups turned on.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

When called during mount, we cannot start the rescan worker thread until
open_ctree is done. This commit restuctures the qgroup rescan internals to
enable a clean deferral of the rescan resume operation.

First of all, the struct qgroup_rescan is removed, saving us a malloc and
some initialization synchronizations problems. Its only element (the worker
struct) now lives within fs_info just as the rest of the rescan code.

Then setting up a rescan worker is split into several reusable stages.
Currently we have three different rescan startup scenarios:
	(A) rescan ioctl
	(B) rescan resume by mount
	(C) rescan by quota enable

Each case needs its own combination of the four following steps:
	(1) set the progress [A, C: zero; B: state of umount]
	(2) commit the transaction [A]
	(3) set the counters [A, C: zero; B: state of umount]
	(4) start worker [A, B, C]

qgroup_rescan_init does step (1). There's no extra function added to commit
a transaction, we've got that already. qgroup_rescan_zero_tracking does
step (3). Step (4) is nothing more than a call to the generic
btrfs_queue_worker.

We also get rid of a double check for the rescan progress during
btrfs_qgroup_account_ref, which is no longer required due to having step 2
from the list above.

As a side effect, this commit prepares to move the rescan start code from
btrfs_run_qgroups (which is run during commit) to a less time critical
section.
Signed-off-by: NJan Schmidt <list.btrfs@jan-o-sch.net>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

Dave pointed out a problem where if you filled up a file system as much as
possible you couldn't remove any files.  The whole unlink reservation thing is
convoluted because it tries to guess if it's going to add space to unlink
something or not, and has all these odd uncommented cases where it simply does
not try.  So to fix this I've added a way to conditionally steal from the global
reserve if we can't make our normal reservation.  If we have more than half the
space in the global reserve free we will go ahead and steal from the global
reserve.  With this patch Dave's reproducer now works and I can rm all the files
on the file system.  Thanks,
Reported-by: NDavid Sterba <dsterba@suse.cz>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

We used 3 variants to track the state of the transaction, it was complex
and wasted the memory space. Besides that, it was hard to understand that
which types of the transaction handles should be blocked in each transaction
state, so the developers often made mistakes.

This patch improved the above problem. In this patch, we define 6 states
for the transaction,
  enum btrfs_trans_state {
	TRANS_STATE_RUNNING		= 0,
	TRANS_STATE_BLOCKED		= 1,
	TRANS_STATE_COMMIT_START	= 2,
	TRANS_STATE_COMMIT_DOING	= 3,
	TRANS_STATE_UNBLOCKED		= 4,
	TRANS_STATE_COMPLETED		= 5,
	TRANS_STATE_MAX			= 6,
  }
and just use 1 variant to track those state.

In order to make the blocked handle types for each state more clear,
we introduce a array:
  unsigned int btrfs_blocked_trans_types[TRANS_STATE_MAX] = {
	[TRANS_STATE_RUNNING]		= 0U,
	[TRANS_STATE_BLOCKED]		= (__TRANS_USERSPACE |
					   __TRANS_START),
	[TRANS_STATE_COMMIT_START]	= (__TRANS_USERSPACE |
					   __TRANS_START |
					   __TRANS_ATTACH),
	[TRANS_STATE_COMMIT_DOING]	= (__TRANS_USERSPACE |
					   __TRANS_START |
					   __TRANS_ATTACH |
					   __TRANS_JOIN),
	[TRANS_STATE_UNBLOCKED]		= (__TRANS_USERSPACE |
					   __TRANS_START |
					   __TRANS_ATTACH |
					   __TRANS_JOIN |
					   __TRANS_JOIN_NOLOCK),
	[TRANS_STATE_COMPLETED]		= (__TRANS_USERSPACE |
					   __TRANS_START |
					   __TRANS_ATTACH |
					   __TRANS_JOIN |
					   __TRANS_JOIN_NOLOCK),
  }
it is very intuitionistic.

Besides that, because we remove ->in_commit in transaction structure, so
the lock ->commit_lock which was used to protect it is unnecessary, remove
->commit_lock.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

The reason we introduce per-subvolume ordered extent list is the same
as the per-subvolume delalloc inode list.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

When we create a snapshot, we need flush all delalloc inodes in the
fs, just flushing the inodes in the source tree is OK. So we introduce
per-subvolume delalloc inode list.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

The grab/put funtions will be used in the next patch, which need grab
the root object and ensure it is not freed. We use reference counter
instead of the srcu lock is to aovid blocking the memory reclaim task,
which invokes synchronize_srcu().
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

There are several functions whose code is similar, such as
  btrfs_find_last_root()
  btrfs_read_fs_root_no_radix()

Besides that, some functions are invoked twice, it is unnecessary,
for example, we are sure that all roots which is found in
  btrfs_find_orphan_roots()
have their orphan items, so it is unnecessary to check the orphan
item again.

So cleanup it.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

The snapshot/subvolume deletion might spend lots of time, it would make
the remount task wait for a long time. This patch improve this problem,
we will break the deletion if the fs is remounted to be R/O. It will make
the users happy.

Cc: David Sterba <dsterba@suse.cz>
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

Clean up the format of the definitions of BTRFS_BLOCK_GROUP_RAID5 and
BTRFS_BLOCK_GROUP_RAID6.
Signed-off-by: NAndreas Philipp <philipp.andreas@gmail.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

btrfs_qgroup_wait_for_completion waits until the currently running qgroup
operation completes. It returns immediately when no rescan process is in
progress. This is useful to automate things around the rescan process (e.g.
testing).
Signed-off-by: NJan Schmidt <list.btrfs@jan-o-sch.net>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

When doing qgroup accounting, we call ulist_alloc()/ulist_free() every time
when we want to walk qgroup tree.

By introducing 'qgroup_ulist', we only need to call ulist_alloc()/ulist_free()
once. This reduce some sys time to allocate memory, see the measurements below

fsstress -p 4 -n 10000 -d $dir

With this patch:

real    0m50.153s
user    0m0.081s
sys     0m6.294s

real    0m51.113s
user    0m0.092s
sys     0m6.220s

real    0m52.610s
user    0m0.096s
sys     0m6.125s	avg 6.213
-----------------------------------------------------
Without the patch:

real    0m54.825s
user    0m0.061s
sys     0m10.665s

real    1m6.401s
user    0m0.089s
sys     0m11.218s

real    1m13.768s
user    0m0.087s
sys     0m10.665s       avg 10.849

we can see the sys time reduce ~43%.
Signed-off-by: NWang Shilong <wangsl-fnst@cn.fujitsu.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

Chris hit a bug where we weren't finding extent records when running extent ops.
This is because we use the delayed_ref_head when running the extent op, which
means we can't use the ->type checks to see if we are metadata.  We also lose
the level of the metadata we are working on.  So to fix this we can just check
the ->is_data section of the extent_op, and we can store the level of the buffer
we were modifying in the extent_op.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

Quota tree has been missing from lockdep annotations, though no warning
has been seen in the wild.

There's currently one entry that does not belong there,
BTRFS_ORPHAN_OBJECTID.  No such tree exists, it's probably a copy &
paste mistake, the id is defined among tree ids.
Signed-off-by: NDavid Sterba <dsterba@suse.cz>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

The superblock checksum is not verified upon mount. <awkward silence>

Add that check and also reorder existing checks to a more logical
order.

Current mkfs.btrfs does not calculate the correct checksum of
super_block and thus a freshly created filesytem will fail to mount when
this patch is applied.

First transaction commit calculates correct superblock checksum and
saves it to disk.

Reproducer:
$ mfks.btrfs /dev/sda
$ mount /dev/sda /mnt
$ btrfs scrub start /mnt
$ sleep 5
$ btrfs scrub status /mnt
... super:2 ...
Signed-off-by: NDavid Sterba <dsterba@suse.cz>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

The variable was named 'data' in btrfs_reserve_extent and that's the
only function that actually uses it to let btrfs_get_alloc_profile know
what profile we want. Then it's passed down as u64 flags.
Signed-off-by: NDavid Sterba <dsterba@suse.cz>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

Big patch, but all it does is add statics to functions which
are in fact static, then remove the associated dead-code fallout.

removed functions:

btrfs_iref_to_path()
__btrfs_lookup_delayed_deletion_item()
__btrfs_search_delayed_insertion_item()
__btrfs_search_delayed_deletion_item()
find_eb_for_page()
btrfs_find_block_group()
range_straddles_pages()
extent_range_uptodate()
btrfs_file_extent_length()
btrfs_scrub_cancel_devid()
btrfs_start_transaction_lflush()

btrfs_print_tree() is left because it is used for debugging.
btrfs_start_transaction_lflush() and btrfs_reada_detach() are
left for symmetry.

ulist.c functions are left, another patch will take care of those.
Signed-off-by: NEric Sandeen <sandeen@redhat.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

If qgroup tracking is out of sync, a rescan operation can be started. It
iterates the complete extent tree and recalculates all qgroup tracking data.
This is an expensive operation and should not be used unless required.

A filesystem under rescan can still be umounted. The rescan continues on the
next mount.  Status information is provided with a separate ioctl while a
rescan operation is in progress.
Signed-off-by: NJan Schmidt <list.btrfs@jan-o-sch.net>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

Sequence numbers for delayed refs have been introduced in the first version
of the qgroup patch set. To solve the problem of find_all_roots on a busy
file system, the tree mod log was introduced. The sequence numbers for that
were simply shared between those two users.

However, at one point in qgroup's quota accounting, there's a statement
accessing the previous sequence number, that's still just doing (seq - 1)
just as it would have to in the very first version.

To satisfy that requirement, this patch makes the sequence number counter 64
bit and splits it into a major part (used for qgroup sequence number
counting) and a minor part (incremented for each tree modification in the
log). This enables us to go exactly one major step backwards, as required
for qgroups, while still incrementing the sequence counter for tree mod log
insertions to keep track of their order. Keeping them in a single variable
means there's no need to change all the code dealing with comparisons of two
sequence numbers.

The sequence number is reset to 0 on commit (not new in this patch), which
ensures we won't overflow the two 32 bit counters.

Without this fix, the qgroup tracking can occasionally go wrong and WARN_ONs
from the tree mod log code may happen.
Signed-off-by: NJan Schmidt <list.btrfs@jan-o-sch.net>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

Signed-off-by: NStefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

Argument 'trans' is not used in btrfs_extend_item().
Signed-off-by: NTsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

If argument 'trans' is unnecessary in the function where
fixup_low_keys() is called, 'trans' is deleted.
Signed-off-by: NTsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

The following case will make the incompat/compat flag of the super block
be recovered.
 Task1					|Task2
 flags = btrfs_super_incompat_flags();	|
					|flags = btrfs_super_incompat_flags();
 flags |= new_flag1;			|
					|flags |= new_flag2;
 btrfs_set_super_incompat_flags(flags);	|
					|btrfs_set_super_incompat_flags(flags);
the new_flag1 is recovered.

In order to avoid this problem, we introduce a lock named super_lock into
the btrfs_fs_info structure. If we want to update incompat/compat flags
of the super block, we must hold it.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

The original code has one spin_lock 'qgroup_lock' to protect quota
configurations in memory. If we want to add a BTRFS_QGROUP_INFO_KEY,
it will be added to Btree firstly, and then update configurations in
memory,however, a race condition may happen between these operations.
For example:
	->add_qgroup_info_item()
		->add_qgroup_rb()

For the above case, del_qgroup_info_item() may happen just before
add_qgroup_rb().

What's worse, when we want to add a qgroup relation:
	->add_qgroup_relation_item()
		->add_qgroup_relations()

We don't have any checks whether 'src' and 'dst' exist before
add_qgroup_relation_item(), a race condition can also happen for
the above case.

To avoid race condition and have all the necessary checks, we introduce
a mutex lock 'qgroup_ioctl_lock', and we make all the user change operations
protected by the mutex lock.
Signed-off-by: NWang Shilong <wangsl-fnst@cn.fujitsu.com>
Reviewed-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

A user sent me a btrfs-image of a file system that was panicing on mount during
the log recovery.  I had originally thought these problems were from a bug in
the free space cache code, but that was just a symptom of the problem.  The
problem is if your application does something like this

[prealloc][prealloc][prealloc]

the internal extent maps will merge those all together into one extent map, even
though on disk they are 3 separate extents.  So if you go to write into one of
these ranges the extent map will be right since we use the physical extent when
doing the write, but when we log the extents they will use the wrong sizes for
the remainder prealloc space.  If this doesn't happen to trip up the free space
cache (which it won't in a lot of cases) then you will get bogus entries in your
extent tree which will screw stuff up later.  The data and such will still work,
but everything else is broken.  This patch fixes this by not allowing extents
that are on the modified list to be merged.  This has the side effect that we
are no longer adding everything to the modified list all the time, which means
we now have to call btrfs_drop_extents every time we log an extent into the
tree.  So this allows me to drop all this speciality code I was using to get
around calling btrfs_drop_extents.  With this patch the testcase I've created no
longer creates a bogus file system after replaying the log.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

With more than one btrfs volume mounted, it can be very difficult to find
out which volume is hitting an error. btrfs_error() will print this, but
it is currently rigged as more of a fatal error handler, while many of
the printk()s are currently for debugging and yet-unhandled cases.

This patch just changes the functions where the device information is
already available. Some cases remain where the root or fs_info is not
passed to the function emitting the error.

This may introduce some confusion with volumes backed by multiple devices
emitting errors referring to the primary device in the set instead of the
one on which the error occurred.

Use btrfs_printk(fs_info, format, ...) rather than writing the device
string every time, and introduce macro wrappers ala XFS for brevity.
Since the function already cannot be used for continuations, print a
newline as part of the btrfs_printk() message rather than at each caller.
Signed-off-by: NSimon Kirby <sim@hostway.ca>
Reviewed-by: NDavid Sterba <dsterba@suse.cz>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

We currently store the first key of the tree block inside the reference for the
tree block in the extent tree.  This takes up quite a bit of space.  Make a new
key type for metadata which holds the level as the offset and completely removes
storing the btrfs_tree_block_info inside the extent ref.  This reduces the size
from 51 bytes to 33 bytes per extent reference for each tree block.  In practice
this results in a 30-35% decrease in the size of our extent tree, which means we
COW less and can keep more of the extent tree in memory which makes our heavy
metadata operations go much faster.  This is not an automatic format change, you
must enable it at mkfs time or with btrfstune.  This patch deals with having
metadata stored as either the old format or the new format so it is easy to
convert.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

The transaction abort stacktrace is printed only once per module
lifetime, but we'd like to see it each time it happens per mounted
filesystem.  Introduce a fs_state flag that records it.

Tweak the messages around abort:
* add error number to the first abort
* print the exact negative errno from btrfs_decode_error
* clean up btrfs_decode_error and callers
* no dots at the end of the messages
Signed-off-by: NDavid Sterba <dsterba@suse.cz>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

There are two problems in the space reservation of the snapshot/
subvolume creation.
- don't reserve the space for the root item insertion
- the space which is reserved in the qgroup is different with
  the free space reservation. we need reserve free space for
  7 items, but in qgroup reservation, we need reserve space only
  for 3 items.

So we implement new metadata reservation functions for the
snapshot/subvolume creation.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

If we remount the fs to close the auto defragment or make the fs R/O,
we should stop the auto defragment.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

super.magic is an le64 but it's treated as an unterminated string when
compared against BTRFS_MAGIC which is defined as a string.  Instead
define BTRFS_MAGIC as a normal hex value and use endian helpers to
compare it to the super's magic.

I tested this by mounting an fs made before the change and made sure
that it didn't introduce sparse errors.  This matches a similar cleanup
that is pending in btrfs-progs.  David Sterba pointed out that we should
fix the kernel side as well :).
Signed-off-by: NZach Brown <zab@redhat.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

Miao made the ordered operations stuff run async, which introduced a
deadlock where we could get somebody (sync) racing in and committing the
transaction while a commit was already happening.  The new committer would
try and flush ordered operations which would hang waiting for the commit to
finish because it is done asynchronously and no longer inherits the callers
trans handle.  To fix this we need to make the ordered operations list a per
transaction list.  We can get new inodes added to the ordered operation list
by truncating them and then having another process writing to them, so this
makes it so that anybody trying to add an ordered operation _must_ start a
transaction in order to add itself to the list, which will keep new inodes
from getting added to the ordered operations list after we start committing.
This should fix the deadlock and also keeps us from doing a lot more work
than we need to during commit.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

The defrag operation can take very long, we want to have a way how to
cancel it. The code checks for a pending signal at safe points in the
defrag loops and returns EAGAIN. This means a user can press ^C after
running 'btrfs fi defrag', woks for both defrag modes, files and root.

Returning from the command was instant in my light tests, but may take
longer depending on the aging factor of the filesystem.
Signed-off-by: NDavid Sterba <dsterba@suse.cz>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>