提交 · 9eb12474787d32a968b5b01ecbf83acd2d230b25 · openeuler / raspberrypi-kernel

30 12月, 2016 1 次提交

由 jpinto 提交于 12月 28, 2016

When the hardware is synthesized with multiple queues, all queues are
disabled for default. This patch adds the rx queues configuration.
This patch was successfully tested in a Synopsys QoS Reference design.
Signed-off-by: NJoao Pinto <jpinto@synopsys.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

9eb12474

28 12月, 2016 2 次提交

net: stmmac: fix incorrect bit set in gmac4 mdio addr register · 5799fc90

由 Kweh, Hock Leong 提交于 12月 28, 2016

Fixing the gmac4 mdio write access to use MII_GMAC4_WRITE only instead of
OR together with MII_WRITE.
Signed-off-by: NKweh, Hock Leong <hock.leong.kweh@intel.com>
Acked-By: NJoao Pinto <jpinto@synopsys.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

5799fc90

r8169: add support for RTL8168 series add-on card. · 610c9087

由 Chun-Hao Lin 提交于 12月 27, 2016

This chip is the same as RTL8168, but its device id is 0x8161.
Signed-off-by: NChun-Hao Lin <hau@realtek.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

610c9087

27 12月, 2016 1 次提交

net: korina: Fix NAPI versus resources freeing · e6afb1ad

由 Florian Fainelli 提交于 12月 23, 2016

Commit beb0babf ("korina: disable napi on close and restart")
introduced calls to napi_disable() that were missing before,
unfortunately this leaves a small window during which NAPI has a chance
to run, yet we just freed resources since korina_free_ring() has been
called:

Fix this by disabling NAPI first then freeing resource, and make sure
that we also cancel the restart task before doing the resource freeing.

Fixes: beb0babf ("korina: disable napi on close and restart")
Reported-by: NAlexandros C. Couloumbis <alex@ozo.com>
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

e6afb1ad

26 12月, 2016 1 次提交

ktime: Cleanup ktime_set() usage · 8b0e1953

由 Thomas Gleixner 提交于 12月 25, 2016

ktime_set(S,N) was required for the timespec storage type and is still
useful for situations where a Seconds and Nanoseconds part of a time value
needs to be converted. For anything where the Seconds argument is 0, this
is pointless and can be replaced with a simple assignment.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>

8b0e1953

25 12月, 2016 2 次提交

clocksource: Use a plain u64 instead of cycle_t · a5a1d1c2

由 Thomas Gleixner 提交于 12月 21, 2016

There is no point in having an extra type for extra confusion. u64 is
unambiguous.

Conversion was done with the following coccinelle script:

@rem@
@@
-typedef u64 cycle_t;

@fix@
typedef cycle_t;
@@
-cycle_t
+u64
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: John Stultz <john.stultz@linaro.org>

a5a1d1c2

Replace <asm/uaccess.h> with <linux/uaccess.h> globally · 7c0f6ba6

由 Linus Torvalds 提交于 12月 24, 2016

This was entirely automated, using the script by Al:

  PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>'
  sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \
        $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h)

to do the replacement at the end of the merge window.
Requested-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

7c0f6ba6

24 12月, 2016 4 次提交

net/mlx4_en: Fix user prio field in XDP forward · eb9def61

由 Tariq Toukan 提交于 12月 22, 2016

The user prio field is wrong (and overflows) in the XDP forward
flow.
This is a result of a bad value for num_tx_rings_p_up, which should
account all XDP TX rings, as they operate for the same user prio.
Signed-off-by: NTariq Toukan <tariqt@mellanox.com>
Reported-by: NMartin KaFai Lau <kafai@fb.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

eb9def61

mlxsw: spectrum_router: Correctly remove nexthop groups · 58312125

由 Ido Schimmel 提交于 12月 23, 2016

At the end of the nexthop initialization process we determine whether
the nexthop should be offloaded or not based on the NUD state of the
neighbour representing it. After all the nexthops were initialized we
refresh the nexthop group and potentially offload it to the device, in
case some of the nexthops were resolved.

Make the destruction of a nexthop group symmetric with its creation by
marking all nexthops as invalid and then refresh the nexthop group to
make sure it was removed from the device's tables.

Fixes: b2157149 ("mlxsw: spectrum_router: Add the nexthop neigh activity update")
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

58312125

mlxsw: spectrum_router: Don't reflect dead neighs · 93a87e5e

由 Ido Schimmel 提交于 12月 23, 2016

When a neighbour is considered to be dead, we should remove it from the
device's table regardless of its NUD state.

Without this patch, after setting a port to be administratively down we
get the following errors when we periodically try to update the kernel
about neighbours activity:

[  461.947268] mlxsw_spectrum 0000:03:00.0 sw1p3: Failed to find
matching neighbour for IP=192.168.100.2

Fixes: a6bf9e93 ("mlxsw: spectrum_router: Offload neighbours based on NUD state change")
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

93a87e5e

stmmac: CSR clock configuration fix · 567be786

由 jpinto 提交于 12月 23, 2016

When testing stmmac with my QoS reference design I checked a problem in the
CSR clock configuration that was impossibilitating the phy discovery, since
every read operation returned 0x0000ffff. This patch fixes the issue.
Signed-off-by: NJoao Pinto <jpinto@synopsys.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

567be786

22 12月, 2016 3 次提交

net: mvpp2: fix dma unmapping of TX buffers for fragments · 8354491c

由 Thomas Petazzoni 提交于 12月 21, 2016

Since commit 71ce391d ("net: mvpp2: enable proper per-CPU TX
buffers unmapping"), we are not correctly DMA unmapping TX buffers for
fragments.

Indeed, the mvpp2_txq_inc_put() function only stores in the
txq_cpu->tx_buffs[] array the physical address of the buffer to be
DMA-unmapped when skb != NULL. In addition, when DMA-unmapping, we use
skb_headlen(skb) to get the size to be unmapped. Both of this works fine
for TX descriptors that are associated directly to a SKB, but not the
ones that are used for fragments, with a NULL pointer as skb:

 - We have a NULL physical address when calling DMA unmap
 - skb_headlen(skb) crashes because skb is NULL

This causes random crashes when fragments are used.

To solve this problem, we need to:

 - Store the physical address of the buffer to be unmapped
   unconditionally, regardless of whether it is tied to a SKB or not.

 - Store the length of the buffer to be unmapped, which requires a new
   field.

Instead of adding a third array to store the length of the buffer to be
unmapped, and as suggested by David Miller, this commit refactors the
tx_buffs[] and tx_skb[] arrays of 'struct mvpp2_txq_pcpu' into a
separate structure 'mvpp2_txq_pcpu_buf', to which a 'size' field is
added. Therefore, instead of having three arrays to allocate/free, we
have a single one, which also improve data locality, reducing the
impact on the CPU cache.

Fixes: 71ce391d ("net: mvpp2: enable proper per-CPU TX buffers unmapping")
Reported-by: NRaphael G <raphael.glon@corp.ovh.com>
Cc: Raphael G <raphael.glon@corp.ovh.com>
Cc: stable@vger.kernel.org
Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

8354491c

net: ethernet: stmmac: dwmac-rk: make clk enablement first in powerup · f217bfde

由 Heiko Stübner 提交于 12月 20, 2016

Right now the dwmac-rk tries to set up the GRF-specific speed and link
options before enabling clocks, phys etc and on previous socs this works
because the GRF is supplied on the whole by one clock.

On the rk3399 however the GRF (General Register Files) clock-supply
has been split into multiple clocks and while there is no specific
grf-gmac clock like for other sub-blocks, it seems the mac-specific
portions are actually supplied by the general mac clock.

This results in hangs on rk3399 boards if the driver is build as module.
When built in te problem of course doesn't surface, as the clocks
are of course still on at the stage before clock_disable_unused.

To solve this, simply move the clock enablement to the first position
in the powerup callback. This is also a good idea in general to
enable clocks before everything else.

Tested on rk3288, rk3368 and rk3399 the dwmac still works on all of them.
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

f217bfde

be2net: Increase skb headroom size to 256 bytes · 76b15923

由 Kalesh A P 提交于 12月 20, 2016

The driver currently allocates 128 bytes of skb headroom.
This was found to be insufficient with some configurations
like Geneve tunnels, which resulted in skb head reallocations.

Increase the headroom to 256 bytes to fix this.
Signed-off-by: NKalesh A P <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: NSuresh Reddy <suresh.reddy@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

76b15923

21 12月, 2016 9 次提交

net/mlx5: use rb_entry() · f7fb1383

由 Geliang Tang 提交于 12月 20, 2016

To make the code clearer, use rb_entry() instead of container_of() to
deal with rbtree.
Signed-off-by: NGeliang Tang <geliangtang@gmail.com>
Acked-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

f7fb1383

ethernet: sfc: Add Kconfig entry for vendor Solarflare · ae99b639

由 Tobias Klauser 提交于 12月 20, 2016

Since commit

  5a6681e2 ("sfc: separate out SFC4000 ("Falcon") support into new sfc-falcon driver")

there are two drivers for Solarflare devices, but both still show up
directly beneath "Ethernet driver support" in the Kconfig. Follow the
pattern of other vendors and group them beneath an own vendor Kconfig
entry for Solarflare.

Cc: Edward Cree <ecree@solarflare.com>
Signed-off-by: NTobias Klauser <tklauser@distanz.ch>
Acked-by: NEdward Cree <ecree@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

ae99b639

net: hix5hd2_gmac: fix compatible strings name · f7ca8e3b

由 Dongpo Li 提交于 12月 20, 2016

The SoC hix5hd2 compatible string has the suffix "-gmac" and
we should not change its compatible string.
So we should name all the compatible string with the suffix "-gmac".
Creating a new name suffix "-gemac" is unnecessary.

We also add another SoC compatible string in dt binding documentation
and describe which generic version the SoC belongs to.

Fixes: d0fb6ba7 ("net: hix5hd2_gmac: add generic compatible string")
Signed-off-by: NDongpo Li <lidongpo@hisilicon.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

f7ca8e3b

net: netcp: ethss: fix 10gbe host port tx pri map configuration · 4c0ef231

由 WingMan Kwok 提交于 12月 19, 2016

This patch adds the missing 10gbe host port tx priority map
configurations.
Signed-off-by: NWingMan Kwok <w-kwok2@ti.com>
Signed-off-by: NMurali Karicheri <m-karicheri2@ti.com>
Signed-off-by: NSekhar Nori <nsekhar@ti.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

4c0ef231

net: netcp: ethss: fix errors in ethtool ops · e9838ef2

由 WingMan Kwok 提交于 12月 19, 2016

In ethtool ops, it needs to retrieve the corresponding
ethss module (gbe or xgbe) from the net_device structure.
Prior to this patch, the retrieving procedure only
checks for the gbe module.  This patch fixes the issue
by checking the xgbe module if the net_device structure
does not correspond to the gbe module.
Signed-off-by: NWingMan Kwok <w-kwok2@ti.com>
Signed-off-by: NMurali Karicheri <m-karicheri2@ti.com>
Signed-off-by: NSekhar Nori <nsekhar@ti.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

e9838ef2

fsl/fman: enable compilation on ARM64 · 2e3db5a4

由 Madalin Bucur 提交于 12月 19, 2016

Signed-off-by: NMadalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

2e3db5a4

fsl/fman: A007273 only applies to PPC SoCs · 1e330995

由 Madalin Bucur 提交于 12月 19, 2016

Signed-off-by: NMadalin Bucur <madalin.bucur@nxp.com>
Reviewed-by: NCamelia Groza <camelia.groza@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

1e330995

powerpc: fsl/fman: remove fsl,fman from of_device_ids[] · ae6021d4

由 Madalin Bucur 提交于 12月 19, 2016

The fsl/fman drivers will use of_platform_populate() on all
supported platforms. Call of_platform_populate() to probe the
FMan sub-nodes.
Signed-off-by: NIgal Liberman <igal.liberman@freescale.com>
Signed-off-by: NMadalin Bucur <madalin.bucur@nxp.com>
Acked-by: NScott Wood <oss@buserror.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

ae6021d4

fsl/fman: fix 1G support for QSGMII interfaces · 606987b0

由 Madalin Bucur 提交于 12月 19, 2016

QSGMII ports were not advertising 1G speed.
Signed-off-by: NMadalin Bucur <madalin.bucur@nxp.com>
Reviewed-by: NCamelia Groza <camelia.groza@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

606987b0

20 12月, 2016 2 次提交

stmmac: fix memory barriers · ad688cdb

由 Pavel Machek 提交于 12月 18, 2016

Fix up memory barriers in stmmac driver. They are meant to protect
against DMA engine, so smp_ variants are certainly wrong, and dma_
variants are preferable.
Signed-off-by: NPavel Machek <pavel@denx.de>
Tested-by: NNiklas Cassel <niklas.cassel@axis.com>
Acked-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

ad688cdb

net: ethernet: cavium: octeon: octeon_mgmt: Handle return NULL error from devm_ioremap · 162809df

由 Arvind Yadav 提交于 12月 15, 2016

Here, If devm_ioremap will fail. It will return NULL.
Kernel can run into a NULL-pointer dereference.
This error check will avoid NULL pointer dereference.
Signed-off-by: NArvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

162809df

18 12月, 2016 12 次提交

net: mv643xx_eth: fix build failure · 3e3397e7

由 Sudip Mukherjee 提交于 12月 17, 2016

The build of sparc allmodconfig fails with the error:
"of_irq_to_resource" [drivers/net/ethernet/marvell/mv643xx_eth.ko]
	undefined!

of_irq_to_resource() is defined when CONFIG_OF_IRQ is defined. And also
CONFIG_OF_IRQ can only be defined if CONFIG_IRQ is defined. So we can
safely use #if defined(CONFIG_OF_IRQ) in the code.
Signed-off-by: NSudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

3e3397e7

mlxsw: spectrum: Mark split ports as such · 9a60c907

由 Ido Schimmel 提交于 12月 16, 2016

When a port is split we should mark it as such, as otherwise the split
ports aren't renamed correctly (e.g. sw1p3 -> sw1p3s1) and the unsplit
operation fails:

$ devlink port split sw1p3 count 4
$ devlink port unsplit eth0
devlink answers: Invalid argument
[  598.565307] mlxsw_spectrum 0000:03:00.0 eth0: Port wasn't split

Fixes: 67963a33 ("mlxsw: Make devlink port instances independent of spectrum/switchx2 port instances")
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Reported-by: NTamir Winetroub <tamirw@mellanox.com>
Reviewed-by: NElad Raz <eladr@mellanox.com>
Tested-by: NTamir Winetroub <tamirw@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

9a60c907

qed: fix old-style function definition · 7729bad4

由 Arnd Bergmann 提交于 12月 16, 2016

The newly added file causes a harmless warning, with "make W=1":

drivers/net/ethernet/qlogic/qed/qed_iscsi.c: In function 'qed_get_iscsi_ops':
drivers/net/ethernet/qlogic/qed/qed_iscsi.c:1268:29: warning: old-style function definition [-Wold-style-definition]

This makes it a proper prototype.

Fixes: fc831825 ("qed: Add support for hardware offloaded iSCSI.")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

7729bad4

r6040: move spinlock in r6040_close as SOFTIRQ-unsafe lock order detected · c762eaa7

由 Manuel Bessler 提交于 12月 15, 2016

'ifconfig eth0 down' makes r6040_close() trigger:
 INFO: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected

Fixed by moving calls to phy_stop(), napi_disable(), netif_stop_queue()
to outside of the module's private spin_lock_irq block.

Found on a Versalogic Tomcat SBC with a Vortex86 SoC

s1660e_5150:~# sudo ifconfig eth0 down
[   61.306415] ======================================================
[   61.306415] [ INFO: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected ]
[   61.306415] 4.9.0-gb898d2d-manuel #1 Not tainted
[   61.306415] ------------------------------------------------------
[   61.306415] ifconfig/449 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire:
[   61.306415]  (&dev->lock){+.+...}, at: [<c1336276>] phy_stop+0x16/0x80

[   61.306415] and this task is already holding:
[   61.306415]  (&(&lp->lock)->rlock){+.-...}, at: [<d0934c84>] r6040_close+0x24/0x230 [r6040]
which would create a new lock dependency:
[   61.306415]  (&(&lp->lock)->rlock){+.-...} -> (&dev->lock){+.+...}

[   61.306415] but this new dependency connects a SOFTIRQ-irq-safe lock:
[   61.306415]  (&(&lp->lock)->rlock){+.-...}
[   61.306415] ... which became SOFTIRQ-irq-safe at:
[   61.306415]   [   61.306415] [<c1075bc5>] __lock_acquire+0x555/0x1770
[   61.306415]   [   61.306415] [<c107717c>] lock_acquire+0x7c/0x150
[   61.306415]   [   61.306415] [<c14bb334>] _raw_spin_lock_irqsave+0x24/0x40
[   61.306415]   [   61.306415] [<d0934ac0>] r6040_start_xmit+0x30/0x1d0 [r6040]
[   61.306415]   [   61.306415] [<c13a7d4d>] dev_hard_start_xmit+0x9d/0x2d0
[   61.306415]   [   61.306415] [<c13c8a38>] sch_direct_xmit+0xa8/0x140
[   61.306415]   [   61.306415] [<c13a8436>] __dev_queue_xmit+0x416/0x780
[   61.306415]   [   61.306415] [<c13a87aa>] dev_queue_xmit+0xa/0x10
[   61.306415]   [   61.306415] [<c13b4837>] neigh_resolve_output+0x147/0x220
[   61.306415]   [   61.306415] [<c144541b>] ip6_finish_output2+0x2fb/0x910
[   61.306415]   [   61.306415] [<c14494e6>] ip6_finish_output+0xa6/0x1a0
[   61.306415]   [   61.306415] [<c1449635>] ip6_output+0x55/0x320
[   61.306415]   [   61.306415] [<c146f4d2>] mld_sendpack+0x352/0x560
[   61.306415]   [   61.306415] [<c146fe55>] mld_ifc_timer_expire+0x155/0x280
[   61.306415]   [   61.306415] [<c108b081>] call_timer_fn+0x81/0x270
[   61.306415]   [   61.306415] [<c108b331>] expire_timers+0xc1/0x180
[   61.306415]   [   61.306415] [<c108b4f7>] run_timer_softirq+0x77/0x150
[   61.306415]   [   61.306415] [<c1043d04>] __do_softirq+0xb4/0x3d0
[   61.306415]   [   61.306415] [<c101a15c>] do_softirq_own_stack+0x1c/0x30
[   61.306415]   [   61.306415] [<c104416e>] irq_exit+0x8e/0xa0
[   61.306415]   [   61.306415] [<c1019d31>] do_IRQ+0x51/0x100
[   61.306415]   [   61.306415] [<c14bc176>] common_interrupt+0x36/0x40
[   61.306415]   [   61.306415] [<c1134928>] set_root+0x68/0xf0
[   61.306415]   [   61.306415] [<c1136120>] path_init+0x400/0x640
[   61.306415]   [   61.306415] [<c11386bf>] path_lookupat+0xf/0xe0
[   61.306415]   [   61.306415] [<c1139ebc>] filename_lookup+0x6c/0x100
[   61.306415]   [   61.306415] [<c1139fd5>] user_path_at_empty+0x25/0x30
[   61.306415]   [   61.306415] [<c11298c6>] SyS_faccessat+0x86/0x1e0
[   61.306415]   [   61.306415] [<c1129a30>] SyS_access+0x10/0x20
[   61.306415]   [   61.306415] [<c100179f>] do_int80_syscall_32+0x3f/0x110
[   61.306415]   [   61.306415] [<c14bba3f>] restore_all+0x0/0x61
[   61.306415]
[   61.306415] to a SOFTIRQ-irq-unsafe lock:
[   61.306415]  (&dev->lock){+.+...}
[   61.306415] ... which became SOFTIRQ-irq-unsafe at:
[   61.306415] ...[   61.306415]
[   61.306415] [<c1075c0c>] __lock_acquire+0x59c/0x1770
[   61.306415]   [   61.306415] [<c107717c>] lock_acquire+0x7c/0x150
[   61.306415]   [   61.306415] [<c14b7add>] mutex_lock_nested+0x2d/0x4a0
[   61.306415]   [   61.306415] [<c133747d>] phy_probe+0x4d/0xc0
[   61.306415]   [   61.306415] [<c1338afe>] phy_attach_direct+0xbe/0x190
[   61.306415]   [   61.306415] [<c1338ca7>] phy_connect_direct+0x17/0x60
[   61.306415]   [   61.306415] [<c1338d23>] phy_connect+0x33/0x70
[   61.306415]   [   61.306415] [<d09357a0>] r6040_init_one+0x3a0/0x500 [r6040]
[   61.306415]   [   61.306415] [<c12a78c7>] pci_device_probe+0x77/0xd0
[   61.306415]   [   61.306415] [<c12f5e15>] driver_probe_device+0x145/0x280
[   61.306415]   [   61.306415] [<c12f5fd9>] __driver_attach+0x89/0x90
[   61.306415]   [   61.306415] [<c12f43ef>] bus_for_each_dev+0x4f/0x80
[   61.306415]   [   61.306415] [<c12f5954>] driver_attach+0x14/0x20
[   61.306415]   [   61.306415] [<c12f55b7>] bus_add_driver+0x197/0x210
[   61.306415]   [   61.306415] [<c12f6a21>] driver_register+0x51/0xd0
[   61.306415]   [   61.306415] [<c12a6955>] __pci_register_driver+0x45/0x50
[   61.306415]   [   61.306415] [<d0938017>] 0xd0938017
[   61.306415]   [   61.306415] [<c100043f>] do_one_initcall+0x2f/0x140
[   61.306415]   [   61.306415] [<c10e48c0>] do_init_module+0x4a/0x19b
[   61.306415]   [   61.306415] [<c10a680e>] load_module+0x1b2e/0x2070
[   61.306415]   [   61.306415] [<c10a6eb9>] SyS_finit_module+0x69/0x80
[   61.306415]   [   61.306415] [<c100179f>] do_int80_syscall_32+0x3f/0x110
[   61.306415]   [   61.306415] [<c14bba3f>] restore_all+0x0/0x61
[   61.306415]
[   61.306415] other info that might help us debug this:
[   61.306415]
[   61.306415]  Possible interrupt unsafe locking scenario:
[   61.306415]
[   61.306415]        CPU0                    CPU1
[   61.306415]        ----                    ----
[   61.306415]   lock(&dev->lock);
[   61.306415]                                local_irq_disable();
[   61.306415]                                lock(&(&lp->lock)->rlock);
[   61.306415]                                lock(&dev->lock);
[   61.306415]   <Interrupt>
[   61.306415]     lock(&(&lp->lock)->rlock);
[   61.306415]
[   61.306415]  *** DEADLOCK ***
[   61.306415]
[   61.306415] 2 locks held by ifconfig/449:
[   61.306415]  #0:  (rtnl_mutex){+.+.+.}, at: [<c13b68ef>] rtnl_lock+0xf/0x20
[   61.306415]  #1:  (&(&lp->lock)->rlock){+.-...}, at: [<d0934c84>] r6040_close+0x24/0x230 [r6040]
[   61.306415]
[   61.306415] the dependencies between SOFTIRQ-irq-safe lock and the holding lock:
[   61.306415] -> (&(&lp->lock)->rlock){+.-...} ops: 3049 {
[   61.306415]    HARDIRQ-ON-W at:
[   61.306415]                     [   61.306415] [<c1075be7>] __lock_acquire+0x577/0x1770
[   61.306415]                     [   61.306415] [<c107717c>] lock_acquire+0x7c/0x150
[   61.306415]                     [   61.306415] [<c14bb21b>] _raw_spin_lock+0x1b/0x30
[   61.306415]                     [   61.306415] [<d09343cc>] r6040_poll+0x2c/0x330 [r6040]
[   61.306415]                     [   61.306415] [<c13a5577>] net_rx_action+0x197/0x340
[   61.306415]                     [   61.306415] [<c1043d04>] __do_softirq+0xb4/0x3d0
[   61.306415]                     [   61.306415] [<c1044037>] run_ksoftirqd+0x17/0x40
[   61.306415]                     [   61.306415] [<c105fe91>] smpboot_thread_fn+0x141/0x180
[   61.306415]                     [   61.306415] [<c105c84e>] kthread+0xde/0x110
[   61.306415]                     [   61.306415] [<c14bb949>] ret_from_fork+0x19/0x30
[   61.306415]    IN-SOFTIRQ-W at:
[   61.306415]                     [   61.306415] [<c1075bc5>] __lock_acquire+0x555/0x1770
[   61.306415]                     [   61.306415] [<c107717c>] lock_acquire+0x7c/0x150
[   61.306415]                     [   61.306415] [<c14bb334>] _raw_spin_lock_irqsave+0x24/0x40
[   61.306415]                     [   61.306415] [<d0934ac0>] r6040_start_xmit+0x30/0x1d0 [r6040]
[   61.306415]                     [   61.306415] [<c13a7d4d>] dev_hard_start_xmit+0x9d/0x2d0
[   61.306415]                     [   61.306415] [<c13c8a38>] sch_direct_xmit+0xa8/0x140
[   61.306415]                     [   61.306415] [<c13a8436>] __dev_queue_xmit+0x416/0x780
[   61.306415]                     [   61.306415] [<c13a87aa>] dev_queue_xmit+0xa/0x10
[   61.306415]                     [   61.306415] [<c13b4837>] neigh_resolve_output+0x147/0x220
[   61.306415]                     [   61.306415] [<c144541b>] ip6_finish_output2+0x2fb/0x910
[   61.306415]                     [   61.306415] [<c14494e6>] ip6_finish_output+0xa6/0x1a0
[   61.306415]                     [   61.306415] [<c1449635>] ip6_output+0x55/0x320
[   61.306415]                     [   61.306415] [<c146f4d2>] mld_sendpack+0x352/0x560
[   61.306415]                     [   61.306415] [<c146fe55>] mld_ifc_timer_expire+0x155/0x280
[   61.306415]                     [   61.306415] [<c108b081>] call_timer_fn+0x81/0x270
[   61.306415]                     [   61.306415] [<c108b331>] expire_timers+0xc1/0x180
[   61.306415]                     [   61.306415] [<c108b4f7>] run_timer_softirq+0x77/0x150
[   61.306415]                     [   61.306415] [<c1043d04>] __do_softirq+0xb4/0x3d0
[   61.306415]                     [   61.306415] [<c101a15c>] do_softirq_own_stack+0x1c/0x30
[   61.306415]                     [   61.306415] [<c104416e>] irq_exit+0x8e/0xa0
[   61.306415]                     [   61.306415] [<c1019d31>] do_IRQ+0x51/0x100
[   61.306415]                     [   61.306415] [<c14bc176>] common_interrupt+0x36/0x40
[   61.306415]                     [   61.306415] [<c1134928>] set_root+0x68/0xf0
[   61.306415]                     [   61.306415] [<c1136120>] path_init+0x400/0x640
[   61.306415]                     [   61.306415] [<c11386bf>] path_lookupat+0xf/0xe0
[   61.306415]                     [   61.306415] [<c1139ebc>] filename_lookup+0x6c/0x100
[   61.306415]                     [   61.306415] [<c1139fd5>] user_path_at_empty+0x25/0x30
[   61.306415]                     [   61.306415] [<c11298c6>] SyS_faccessat+0x86/0x1e0
[   61.306415]                     [   61.306415] [<c1129a30>] SyS_access+0x10/0x20
[   61.306415]                     [   61.306415] [<c100179f>] do_int80_syscall_32+0x3f/0x110
[   61.306415]                     [   61.306415] [<c14bba3f>] restore_all+0x0/0x61
[   61.306415]    INITIAL USE at:
[   61.306415]                    [   61.306415] [<c107586e>] __lock_acquire+0x1fe/0x1770
[   61.306415]                    [   61.306415] [<c107717c>] lock_acquire+0x7c/0x150
[   61.306415]                    [   61.306415] [<c14bb334>] _raw_spin_lock_irqsave+0x24/0x40
[   61.306415]                    [   61.306415] [<d093474e>] r6040_get_stats+0x1e/0x60 [r6040]
[   61.306415]                    [   61.306415] [<c139fb16>] dev_get_stats+0x96/0xc0
[   61.306415]                    [   61.306415] [<c14b416e>] rtnl_fill_stats+0x36/0xfd
[   61.306415]                    [   61.306415] [<c13b7b3c>] rtnl_fill_ifinfo+0x47c/0xce0
[   61.306415]                    [   61.306415] [<c13bc08e>] rtmsg_ifinfo_build_skb+0x4e/0xd0
[   61.306415]                    [   61.306415] [<c13bc120>] rtmsg_ifinfo.part.20+0x10/0x40
[   61.306415]                    [   61.306415] [<c13bc16b>] rtmsg_ifinfo+0x1b/0x20
[   61.306415]                    [   61.306415] [<c13a9d19>] register_netdevice+0x409/0x550
[   61.306415]                    [   61.306415] [<c13a9e72>] register_netdev+0x12/0x20
[   61.306415]                    [   61.306415] [<d09357e8>] r6040_init_one+0x3e8/0x500 [r6040]
[   61.306415]                    [   61.306415] [<c12a78c7>] pci_device_probe+0x77/0xd0
[   61.306415]                    [   61.306415] [<c12f5e15>] driver_probe_device+0x145/0x280
[   61.306415]                    [   61.306415] [<c12f5fd9>] __driver_attach+0x89/0x90
[   61.306415]                    [   61.306415] [<c12f43ef>] bus_for_each_dev+0x4f/0x80
[   61.306415]                    [   61.306415] [<c12f5954>] driver_attach+0x14/0x20
[   61.306415]                    [   61.306415] [<c12f55b7>] bus_add_driver+0x197/0x210
[   61.306415]                    [   61.306415] [<c12f6a21>] driver_register+0x51/0xd0
[   61.306415]                    [   61.306415] [<c12a6955>] __pci_register_driver+0x45/0x50
[   61.306415]                    [   61.306415] [<d0938017>] 0xd0938017
[   61.306415]                    [   61.306415] [<c100043f>] do_one_initcall+0x2f/0x140
[   61.306415]                    [   61.306415] [<c10e48c0>] do_init_module+0x4a/0x19b
[   61.306415]                    [   61.306415] [<c10a680e>] load_module+0x1b2e/0x2070
[   61.306415]                    [   61.306415] [<c10a6eb9>] SyS_finit_module+0x69/0x80
[   61.306415]                    [   61.306415] [<c100179f>] do_int80_syscall_32+0x3f/0x110
[   61.306415]                    [   61.306415] [<c14bba3f>] restore_all+0x0/0x61
[   61.306415]  }
[   61.306415]  ... key      at: [<d0936280>] __key.45893+0x0/0xfffff739 [r6040]
[   61.306415]  ... acquired at:
[   61.306415]    [   61.306415] [<c1074a32>] check_irq_usage+0x42/0xb0
[   61.306415]    [   61.306415] [<c107677c>] __lock_acquire+0x110c/0x1770
[   61.306415]    [   61.306415] [<c107717c>] lock_acquire+0x7c/0x150
[   61.306415]    [   61.306415] [<c14b7add>] mutex_lock_nested+0x2d/0x4a0
[   61.306415]    [   61.306415] [<c1336276>] phy_stop+0x16/0x80
[   61.306415]    [   61.306415] [<d0934ce9>] r6040_close+0x89/0x230 [r6040]
[   61.306415]    [   61.306415] [<c13a0a91>] __dev_close_many+0x61/0xa0
[   61.306415]    [   61.306415] [<c13a0bbf>] __dev_close+0x1f/0x30
[   61.306415]    [   61.306415] [<c13a9127>] __dev_change_flags+0x87/0x150
[   61.306415]    [   61.306415] [<c13a9213>] dev_change_flags+0x23/0x60
[   61.306415]    [   61.306415] [<c1416238>] devinet_ioctl+0x5f8/0x6f0
[   61.306415]    [   61.306415] [<c1417f75>] inet_ioctl+0x65/0x90
[   61.306415]    [   61.306415] [<c1389b54>] sock_ioctl+0x124/0x2b0
[   61.306415]    [   61.306415] [<c113cf7c>] do_vfs_ioctl+0x7c/0x790
[   61.306415]    [   61.306415] [<c113d6b8>] SyS_ioctl+0x28/0x50
[   61.306415]    [   61.306415] [<c100179f>] do_int80_syscall_32+0x3f/0x110
[   61.306415]    [   61.306415] [<c14bba3f>] restore_all+0x0/0x61
[   61.306415]
[   61.306415]
the dependencies between the lock to be acquired[   61.306415]  and SOFTIRQ-irq-unsafe lock:
[   61.306415] -> (&dev->lock){+.+...} ops: 56 {
[   61.306415]    HARDIRQ-ON-W at:
[   61.306415]                     [   61.306415] [<c1075be7>] __lock_acquire+0x577/0x1770
[   61.306415]                     [   61.306415] [<c107717c>] lock_acquire+0x7c/0x150
[   61.306415]                     [   61.306415] [<c14b7add>] mutex_lock_nested+0x2d/0x4a0
[   61.306415]                     [   61.306415] [<c133747d>] phy_probe+0x4d/0xc0
[   61.306415]                     [   61.306415] [<c1338afe>] phy_attach_direct+0xbe/0x190
[   61.306415]                     [   61.306415] [<c1338ca7>] phy_connect_direct+0x17/0x60
[   61.306415]                     [   61.306415] [<c1338d23>] phy_connect+0x33/0x70
[   61.306415]                     [   61.306415] [<d09357a0>] r6040_init_one+0x3a0/0x500 [r6040]
[   61.306415]                     [   61.306415] [<c12a78c7>] pci_device_probe+0x77/0xd0
[   61.306415]                     [   61.306415] [<c12f5e15>] driver_probe_device+0x145/0x280
[   61.306415]                     [   61.306415] [<c12f5fd9>] __driver_attach+0x89/0x90
[   61.306415]                     [   61.306415] [<c12f43ef>] bus_for_each_dev+0x4f/0x80
[   61.306415]                     [   61.306415] [<c12f5954>] driver_attach+0x14/0x20
[   61.306415]                     [   61.306415] [<c12f55b7>] bus_add_driver+0x197/0x210
[   61.306415]                     [   61.306415] [<c12f6a21>] driver_register+0x51/0xd0
[   61.306415]                     [   61.306415] [<c12a6955>] __pci_register_driver+0x45/0x50
[   61.306415]                     [   61.306415] [<d0938017>] 0xd0938017
[   61.306415]                     [   61.306415] [<c100043f>] do_one_initcall+0x2f/0x140
[   61.306415]                     [   61.306415] [<c10e48c0>] do_init_module+0x4a/0x19b
[   61.306415]                     [   61.306415] [<c10a680e>] load_module+0x1b2e/0x2070
[   61.306415]                     [   61.306415] [<c10a6eb9>] SyS_finit_module+0x69/0x80
[   61.306415]                     [   61.306415] [<c100179f>] do_int80_syscall_32+0x3f/0x110
[   61.306415]                     [   61.306415] [<c14bba3f>] restore_all+0x0/0x61
[   61.306415]    SOFTIRQ-ON-W at:
[   61.306415]                     [   61.306415] [<c1075c0c>] __lock_acquire+0x59c/0x1770
[   61.306415]                     [   61.306415] [<c107717c>] lock_acquire+0x7c/0x150
[   61.306415]                     [   61.306415] [<c14b7add>] mutex_lock_nested+0x2d/0x4a0
[   61.306415]                     [   61.306415] [<c133747d>] phy_probe+0x4d/0xc0
[   61.306415]                     [   61.306415] [<c1338afe>] phy_attach_direct+0xbe/0x190
[   61.306415]                     [   61.306415] [<c1338ca7>] phy_connect_direct+0x17/0x60
[   61.306415]                     [   61.306415] [<c1338d23>] phy_connect+0x33/0x70
[   61.306415]                     [   61.306415] [<d09357a0>] r6040_init_one+0x3a0/0x500 [r6040]
[   61.306415]                     [   61.306415] [<c12a78c7>] pci_device_probe+0x77/0xd0
[   61.306415]                     [   61.306415] [<c12f5e15>] driver_probe_device+0x145/0x280
[   61.306415]                     [   61.306415] [<c12f5fd9>] __driver_attach+0x89/0x90
[   61.306415]                     [   61.306415] [<c12f43ef>] bus_for_each_dev+0x4f/0x80
[   61.306415]                     [   61.306415] [<c12f5954>] driver_attach+0x14/0x20
[   61.306415]                     [   61.306415] [<c12f55b7>] bus_add_driver+0x197/0x210
[   61.306415]                     [   61.306415] [<c12f6a21>] driver_register+0x51/0xd0
[   61.306415]                     [   61.306415] [<c12a6955>] __pci_register_driver+0x45/0x50
[   61.306415]                     [   61.306415] [<d0938017>] 0xd0938017
[   61.306415]                     [   61.306415] [<c100043f>] do_one_initcall+0x2f/0x140
[   61.306415]                     [   61.306415] [<c10e48c0>] do_init_module+0x4a/0x19b
[   61.306415]                     [   61.306415] [<c10a680e>] load_module+0x1b2e/0x2070
[   61.306415]                     [   61.306415] [<c10a6eb9>] SyS_finit_module+0x69/0x80
[   61.306415]                     [   61.306415] [<c100179f>] do_int80_syscall_32+0x3f/0x110
[   61.306415]                     [   61.306415] [<c14bba3f>] restore_all+0x0/0x61
[   61.306415]    INITIAL USE at:
[   61.306415]                    [   61.306415] [<c107586e>] __lock_acquire+0x1fe/0x1770
[   61.306415]                    [   61.306415] [<c107717c>] lock_acquire+0x7c/0x150
[   61.306415]                    [   61.306415] [<c14b7add>] mutex_lock_nested+0x2d/0x4a0
[   61.306415]                    [   61.306415] [<c133747d>] phy_probe+0x4d/0xc0
[   61.306415]                    [   61.306415] [<c1338afe>] phy_attach_direct+0xbe/0x190
[   61.306415]                    [   61.306415] [<c1338ca7>] phy_connect_direct+0x17/0x60
[   61.306415]                    [   61.306415] [<c1338d23>] phy_connect+0x33/0x70
[   61.306415]                    [   61.306415] [<d09357a0>] r6040_init_one+0x3a0/0x500 [r6040]
[   61.306415]                    [   61.306415] [<c12a78c7>] pci_device_probe+0x77/0xd0
[   61.306415]                    [   61.306415] [<c12f5e15>] driver_probe_device+0x145/0x280
[   61.306415]                    [   61.306415] [<c12f5fd9>] __driver_attach+0x89/0x90
[   61.306415]                    [   61.306415] [<c12f43ef>] bus_for_each_dev+0x4f/0x80
[   61.306415]                    [   61.306415] [<c12f5954>] driver_attach+0x14/0x20
[   61.306415]                    [   61.306415] [<c12f55b7>] bus_add_driver+0x197/0x210
[   61.306415]                    [   61.306415] [<c12f6a21>] driver_register+0x51/0xd0
[   61.306415]                    [   61.306415] [<c12a6955>] __pci_register_driver+0x45/0x50
[   61.306415]                    [   61.306415] [<d0938017>] 0xd0938017
[   61.306415]                    [   61.306415] [<c100043f>] do_one_initcall+0x2f/0x140
[   61.306415]                    [   61.306415] [<c10e48c0>] do_init_module+0x4a/0x19b
[   61.306415]                    [   61.306415] [<c10a680e>] load_module+0x1b2e/0x2070
[   61.306415]                    [   61.306415] [<c10a6eb9>] SyS_finit_module+0x69/0x80
[   61.306415]                    [   61.306415] [<c100179f>] do_int80_syscall_32+0x3f/0x110
[   61.306415]                    [   61.306415] [<c14bba3f>] restore_all+0x0/0x61
[   61.306415]  }
[   61.306415]  ... key      at: [<c1f28f39>] __key.43998+0x0/0x8
[   61.306415]  ... acquired at:
[   61.306415]    [   61.306415] [<c1074a32>] check_irq_usage+0x42/0xb0
[   61.306415]    [   61.306415] [<c107677c>] __lock_acquire+0x110c/0x1770
[   61.306415]    [   61.306415] [<c107717c>] lock_acquire+0x7c/0x150
[   61.306415]    [   61.306415] [<c14b7add>] mutex_lock_nested+0x2d/0x4a0
[   61.306415]    [   61.306415] [<c1336276>] phy_stop+0x16/0x80
[   61.306415]    [   61.306415] [<d0934ce9>] r6040_close+0x89/0x230 [r6040]
[   61.306415]    [   61.306415] [<c13a0a91>] __dev_close_many+0x61/0xa0
[   61.306415]    [   61.306415] [<c13a0bbf>] __dev_close+0x1f/0x30
[   61.306415]    [   61.306415] [<c13a9127>] __dev_change_flags+0x87/0x150
[   61.306415]    [   61.306415] [<c13a9213>] dev_change_flags+0x23/0x60
[   61.306415]    [   61.306415] [<c1416238>] devinet_ioctl+0x5f8/0x6f0
[   61.306415]    [   61.306415] [<c1417f75>] inet_ioctl+0x65/0x90
[   61.306415]    [   61.306415] [<c1389b54>] sock_ioctl+0x124/0x2b0
[   61.306415]    [   61.306415] [<c113cf7c>] do_vfs_ioctl+0x7c/0x790
[   61.306415]    [   61.306415] [<c113d6b8>] SyS_ioctl+0x28/0x50
[   61.306415]    [   61.306415] [<c100179f>] do_int80_syscall_32+0x3f/0x110
[   61.306415]    [   61.306415] [<c14bba3f>] restore_all+0x0/0x61
[   61.306415]
[   61.306415]
[   61.306415] stack backtrace:
[   61.306415] CPU: 0 PID: 449 Comm: ifconfig Not tainted 4.9.0-gb898d2d-manuel #1
[   61.306415] Call Trace:
[   61.306415]  dump_stack+0x16/0x19
[   61.306415]  check_usage+0x3f6/0x550
[   61.306415]  ? check_usage+0x4d/0x550
[   61.306415]  check_irq_usage+0x42/0xb0
[   61.306415]  __lock_acquire+0x110c/0x1770
[   61.306415]  lock_acquire+0x7c/0x150
[   61.306415]  ? phy_stop+0x16/0x80
[   61.306415]  mutex_lock_nested+0x2d/0x4a0
[   61.306415]  ? phy_stop+0x16/0x80
[   61.306415]  ? r6040_close+0x24/0x230 [r6040]
[   61.306415]  ? __delay+0x9/0x10
[   61.306415]  phy_stop+0x16/0x80
[   61.306415]  r6040_close+0x89/0x230 [r6040]
[   61.306415]  __dev_close_many+0x61/0xa0
[   61.306415]  __dev_close+0x1f/0x30
[   61.306415]  __dev_change_flags+0x87/0x150
[   61.306415]  dev_change_flags+0x23/0x60
[   61.306415]  devinet_ioctl+0x5f8/0x6f0
[   61.306415]  inet_ioctl+0x65/0x90
[   61.306415]  sock_ioctl+0x124/0x2b0
[   61.306415]  ? dlci_ioctl_set+0x30/0x30
[   61.306415]  do_vfs_ioctl+0x7c/0x790
[   61.306415]  ? trace_hardirqs_on+0xb/0x10
[   61.306415]  ? call_rcu_sched+0xd/0x10
[   61.306415]  ? __put_cred+0x32/0x50
[   61.306415]  ? SyS_faccessat+0x178/0x1e0
[   61.306415]  SyS_ioctl+0x28/0x50
[   61.306415]  do_int80_syscall_32+0x3f/0x110
[   61.306415]  entry_INT80_32+0x2f/0x2f
[   61.306415] EIP: 0xb764d364
[   61.306415] EFLAGS: 00000286 CPU: 0
[   61.306415] EAX: ffffffda EBX: 00000004 ECX: 00008914 EDX: bfa99d7c
[   61.306415] ESI: bfa99e4c EDI: fffffffe EBP: 00000004 ESP: bfa99d58
[   61.306415]  DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b
[   63.836607] r6040 0000:00:08.0 eth0: Link is Down
Signed-off-by: NManuel Bessler <manuel.bessler@sensus.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

c762eaa7

net: sfc: use new api ethtool_{get|set}_link_ksettings · 7cafe8f8

由 Philippe Reynes 提交于 12月 15, 2016

The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.
Signed-off-by: NPhilippe Reynes <tremyfr@gmail.com>
Tested-by: NBert Kenward <bkenward@solarflare.com>
Acked-by: NBert Kenward <bkenward@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

7cafe8f8

net: davicom: dm9000: use new api ethtool_{get|set}_link_ksettings · 99bff5ee

由 Philippe Reynes 提交于 12月 14, 2016

The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.
Signed-off-by: NPhilippe Reynes <tremyfr@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

99bff5ee

net: cirrus: ep93xx: use new api ethtool_{get|set}_link_ksettings · 93dfe6c2

由 Philippe Reynes 提交于 12月 12, 2016

The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.
Signed-off-by: NPhilippe Reynes <tremyfr@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

93dfe6c2

net: chelsio: cxgb3: use new api ethtool_{get|set}_link_ksettings · b7b44fd2

由 Philippe Reynes 提交于 12月 12, 2016

The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.
Signed-off-by: NPhilippe Reynes <tremyfr@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

b7b44fd2

net: chelsio: cxgb2: use new api ethtool_{get|set}_link_ksettings · 49cad939

由 Philippe Reynes 提交于 12月 11, 2016

The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.
Signed-off-by: NPhilippe Reynes <tremyfr@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

49cad939

bna: use designated initializers · 9751362a

由 Kees Cook 提交于 12月 16, 2016

Prepare to mark sensitive kernel structures for randomization by making
sure they're using designated initializers. These were identified during
allyesconfig builds of x86, arm, and arm64, with most initializer fixes
extracted from grsecurity.
Signed-off-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

9751362a

dpaa_eth: remove redundant dependency on FSL_SOC · 708f0f4f

由 Madalin Bucur 提交于 12月 15, 2016

Signed-off-by: NMadalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

708f0f4f

dpaa_eth: use big endian accessors · 7d6f8dc0

由 Claudiu Manoil 提交于 12月 15, 2016

Ensure correct access to the big endian QMan HW through proper
accessors.
Signed-off-by: NClaudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: NMadalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

7d6f8dc0

17 12月, 2016 3 次提交

net: macb: Added PCI wrapper for Platform Driver. · 83a77e9e

由 Bartosz Folta 提交于 12月 14, 2016

There are hardware PCI implementations of Cadence GEM network
controller. This patch will allow to use such hardware with reuse of
existing Platform Driver.
Signed-off-by: NBartosz Folta <bfolta@cadence.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

83a77e9e

ibmveth: calculate gso_segs for large packets · 94acf164

由 Thomas Falcon 提交于 12月 13, 2016

Include calculations to compute the number of segments
that comprise an aggregated large packet.
Signed-off-by: NThomas Falcon <tlfalcon@linux.vnet.ibm.com>
Reviewed-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Reviewed-by: NJonathan Maxwell <jmaxwell37@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

94acf164

net: qcom/emac: don't try to claim clocks on ACPI systems · 026acd5f

由 Timur Tabi 提交于 12月 13, 2016

On ACPI systems, clocks are not available to drivers directly.  They are
handled exclusively by ACPI and/or firmware, so there is no clock driver.
Calls to clk_get() always fail, so we should not even attempt to claim
any clocks on ACPI systems.
Signed-off-by: NTimur Tabi <timur@codeaurora.org>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

026acd5f