Whilst most monitors do wire up the HPD presence pin, it seems quite a
few KVM do not. Therefore if we simply rely on the HPD pin being
asserted to indicate a connected monitor we fail miserable, so fall back
to performing a DCC query for the EDID.
Reported-and-tested-by: NMatthieu LAVIE <boiteamadmax@hotmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=50501Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

When we reset the ring control registers, including the HEAD and TAIL of
the ring, we also need to reset associated state. In this instance, we
were failing to reset the cached value of ring->last_retired_head and so
upon the first request for more space following a resume would
potentially (depending on a narrow race window) believe that the HEAD had
advanced much further than reality.

This is a regression from:

commit a71d8d94
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Wed Feb 15 11:25:36 2012 +0000

    drm/i915: Record the tail at each request and use it to estimate the head
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: stable@vger.kernel.org # 3.4
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

These two variables were not required after new API was introduced.
Signed-off-by: NDave Airlie <airlied@redhat.com>

Only override the ddc bus if the connector doesn't have
a valid one.  The existing code overrode the ddc bus for
all connectors even if it had ddc bus.

Fixes ddc on another XFX card with the same pci ids that
was broken by the quirk overwriting the correct ddc bus.
Reported-by: NMehdi Aqadjani Memar <m.aqadjanimemar@student.ru.nl>
Cc: stable@vger.kernel.org
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

The rest of the code uses stdint types, so use them in
drm_property_change_is_valid() as well.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Using the wrong union.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

If we hit an error here, then we should unlock and unreference obj
before returning.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Just move its only caller into the same file as it and make it static.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

We still don't understand why this fails exactly, but if fails way
too often for a simple debug information. Furthermore the current
ducttape should prevent the gpu from getting stuck at low frequencies.

Hence tune down the dmesg noise.

Note that the known failure case is that the register read returns 0
when the gpu gets confused.

v2: Add comments about the known failure case.
Acked-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-Off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This is now used intentionally to prevent proliferation of is-pinned
checks upon the inactive list following:

commit 1b50247a
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Tue Apr 24 15:47:30 2012 +0100

    drm/i915: Remove the list of pinned inactive objects

Reported-and-tested-by: guang.a.yang@intel.com
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=50075Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Broadwater and Crestline share a limitation that prevent it from
relocating general surface state above 4GiB. The only recourse we have
since any buffer object may be used as a relocation target is then to
limit all object allocations on 965g[m] to DMA32.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Media turbo requests can either use RPVSWREQ or RPNSWREQ to indicate
what the interrupt handler should do.  Since we only deal with the
latter in our turbo code, make the media engine use that for turbo
requests.

Cc: stable@vger.kernel.org.
Tested-by: NJoe Bloggsian <joebloggsian@gmail.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: NEugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

These are ultra-low-res modes used to upscale SDTV content and we
don't know how to support these on dp on intel hw:
- It's unclear whether we can send avi infoframes over dp ports.
- And the pixel repeat setting that work for hdmi/sdvo explicitly
  don't work for dp.

So don't bother and just reject these modes. These modes have been
introduced in

commit 54ac76f8
Author: Christian Schmidt <schmidt@digadd.de>
Date:   Mon Dec 19 14:53:16 2011 +0000

    drm/edid: support CEA video modes.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=45729Tested-by: NYuang Guang <guang.a.yang@intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Tested-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-Off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

These 2 modes were removed by mistake during a clean up.
So, now it is time to add them back. For further info about
supported mode and standard timing table please check:
VOL_3_display_registers_updated.pdf at intellinuxgraphics.org.

Note that this regression has been introduce in

commit 55a6713b
Author: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Date:   Thu Dec 15 14:47:33 2011 -0200

    drm/i915: Removing TV Out modes.

and this commit partially reverts it by re-adding the wrongly removed
modes.
Reported-by: NRobert Lowery <rglowery@exemail.com.au>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@gmail.com>
[danvet: Pimped commit message to cite the commit that introduced this
regression.]
Cc: stable@vger.kernel.org
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Otherwise the hw will get confused and result in a black screen.

This regression has been most likely introduce in

commit 974b9331
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Sun Sep 5 00:44:20 2010 +0100

    drm/i915/tv: Poll for DAC state change

That commit replace the first msleep(20) with a busy-loop, but failed
to keep the 2nd msleep around. Later on we've replaced all these
msleep(20) by proper vblanks.

For reference also see the commit in xf86-video-intel:

commit 1142be53eb8d2ee8a9b60ace5d49f0ba27332275
Author: Jesse Barnes <jbarnes@hobbes.lan>
Date:   Mon Jun 9 08:52:59 2008 -0700

    Fix TV programming:  add vblank wait after TV_CTL writes

    Fxies FDO bug #14000; we need to wait for vblank after
    writing TV_CTL or following "DPMS on" calls may not actually enable the output.

v2: As suggested by Chris Wilson, add a small comment to ensure that
no one accidentally removes this vblank wait again - there really
seems to be no sane explanation for why we need it, but it is
required.

Launchpad: https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-intel/+bug/763688Reported-and-Tested-by: NRobert Lowery <rglowery@exemail.com.au>
Cc: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Cc: stable@vger.kernel.org
Acked-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-Off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This box has DisplayPort and VGA, but no LVDS. Product specs are at
http://h10010.www1.hp.com/wwpc/us/en/sm/WF25a/12454-12454-321959-338927-3640406-4282707.html?dnr=1
and dmidecode output can be found at http://www.getslash.de/bug_attachments/dmidecode-t5740e.txtSigned-off-by: NJan-Benedict Glaw <jbglaw@getslash.de>
Cc: stable@vger.kernel.org
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We have one bug report from a validation team that we get the eDP
panel sequencing still somewhat wrong: We need to enable VDD while
switching off the panel and backlight. Unfortunately that reporter
seems to have fallen off the earth :(

For another reporter this actually fixes a black panel issue because
without this the backlight/panel gets confused and doesn't light up
again.

v2: I've forgotten to remove the vdd_off call in panel_off which is
now bogus. This essentially reverts

commit 17038de5
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Mon Apr 16 22:43:42 2012 +0100

    drm/i915/dp: Flush any outstanding work to turn the VDD off

v3: the current panel_off code forces off the vdd power, too. Which is
bogus and resulted in some funny warnings later on when we've tried to
do aux channel communications with just the vdd forced on. Fix this,
too.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=46312
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=43163Tested-by: NVincent Frentzel <zcecc22@gmail.com>
Cc: stable@kernel.org
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-Off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The existing assertions were written under the assumption that we wanted
to test the related PLL to a CRTC. With the split of PLL into a
separately managed entity which may be shared amongst CRTCs, we need to
pass in both the CRTC and the PLL to the assertion routine.
Occassionally, this means passing NULL for the CRTC as we wish to check
the status of the PLL irrespective of the current CRTC.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Acked-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

In order to avoid missed down-interrupts when coming out of RC6, it is
advised that we always reset the down-threshold upon a PM event. This is
due to that the PM unit goes through a little dance when coming out of
RC6, it first brings the GPU up at the lowest frequency then a short
time later it restores the thresholds. During that interval, the
down-interval may expire and the interrupt be suppressed.

Now aware of the dance taking place within the GPU when coming out of
RC6, one wonders what other writes need to be queued in the fifo buffer
in order to be properly sequenced; setting the RP state appears to be
one.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=44006Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Acked-by: NBen Widawsky <ben@bwidawsk.net>
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We've simply ignored this, which isn't too great. With this, interlaced
1080i works on my HDMI screen connected through sdvo. For no apparent
reason anything else still doesn't work as it should.

While at it, give these magic numbers in the dtd proper names and
add a comment that they match with EDID detailed timings.

v2: Actually use the right bit for interlaced.
Tested-by: NPeter Ross <pross@xvid.org>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Cc: stable@vger.kernel.org
Signed-Off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: NMarcin Kościelnicki <koriakin@0x04.net>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Currently nouveau only registers as a vga_switcheroo client, but never
unregisters. This patch adds the necessary unregister calls.
Signed-off-by: NAndreas Heider <andreas@meetr.de>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Currently vga_switcheroo_unregister_handler is called unconditionally when
nouveau is unloaded, even when nouveau never registered a handler. This
interferes with other switcheroo handlers, as vga_switcheroo doesn't check who
called unregister_handler, but simply unregisters the current handler. This
patch adds a check so unregister is only called if a handler was registered by
nouveau before.
Signed-off-by: NAndreas Heider <andreas@meetr.de>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Bugs me every time I put in the TNT2..
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

This is very annoying sometimes..
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NMarcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Disabled for the moment until some performance issues are sorted out, code
committed as a reference point.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

fuc is from pscnv driver.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Been tested on each major revision that's relevant here, but I'm sure there
are still bugs waiting to be ironed out.

This is a *very* invasive change.

There's a couple of pieces left that I don't like much (eg. other engines
using fifo_priv for the channel count), but that's an artefact of there
being a master channel list still.  This is changing, slowly.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

We never turn this on, no point maintaining the code for it..
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

PFIFO context destruction triggers this automagically now.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Now triggered automagically by the GPU on PFIFO takedown.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>