Supported on rv6xx/r7xx/evergreen.  Cards come up in gen1 mode.
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Reported-by: N屋国遥 <hyagni@gmail.com>
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

With cmwq, there's no reason for radeon to use a dedicated workqueue.
Drop dev_priv->wq and use system_wq instead.

Because radeon_driver_irq_uninstall_kms() may be called from
unsleepable context, the work items can't be flushed from there.
Instead, init and flush from radeon_irq_kms_init/fini().

While at it, simplify canceling/flushing of rdev->pm.dynpm_idle_work.
Always initialize and sync cancel instead of being unnecessarily smart
about it.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NAlex Deucher <alexdeucher@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NDave Airlie <airlied@redhat.com>

The CMASK RAM is for colorbuffer compression (used in conjunction
with MSAA). Only one user (filp) can access it.

The CMASK RAM access is managed in the same way as Hyper-Z, but there is
a separate ioctl, because an app that uses MSAA does not necessarily
have to use zbuffering.
Signed-off-by: NMarek Olšák <maraeo@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Acer laptop (TravelMate 5730G) has an HDMI connector
on the laptop and a DVI connector on the docking station
and both share the same encoder, hpd pin, and ddc line.
The bios connector table reflects this and is technically
correct, however, we drop the DVI connector here since
xrandr has no concept of encoders (only crtcs and connectors)
and will try and drive both connectors with different crtcs
which isn't possible on the hardware side and leaves no crtcs
for LVDS or VGA.

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=32732Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

stage 1: turn card on, switch boot vga pointer.
stage 2: switch fbs, switch mux and power off old card.
Signed-off-by: NDave Airlie <airlied@redhat.com>

We need to track the state of the switch in drivers, so that after s/r
we don't resume the card we've explicitly switched off before. Also
don't allow a userspace open to occur if we've switched the gpu off.
Signed-off-by: NDave Airlie <airlied@redhat.com>

This adds a hook after the mux is switched for the driver to reprobe
the connected outputs.
Signed-off-by: NDave Airlie <airlied@redhat.com>

This improves the IGD/DIS picking using firstly if Intel, then
if the bus is bus 0. There may be a correct way to do this, but
I've no idea what it is.
Signed-off-by: NDave Airlie <airlied@redhat.com>

this just adds the callback on the delayed switch mechanism.
Signed-off-by: NDave Airlie <airlied@redhat.com>

This allows the mux to be switched from userspace using MIGD/MDIS
command to the switch.
Signed-off-by: NDave Airlie <airlied@redhat.com>

At least on the nvidia mux the power switch seems to be executed
by the ACPI PS0/PS3 methods so need to do it explicitly.
Signed-off-by: NDave Airlie <airlied@redhat.com>

We really want to see this so we can confirm that we pick the right one.
Signed-off-by: NDave Airlie <airlied@redhat.com>

Now that soft reset works, we can add this.
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

* master.kernel.org:/home/rmk/linux-2.6-arm:
  ARM: pxa: fix page table corruption on resume
  ARM: it8152: add IT8152_LAST_IRQ definition to fix build error
  ARM: pxa: PXA_ESERIES depends on FB_W100.
  ARM: 6605/1: Add missing include "asm/memory.h"
  ARM: 6540/1: Stop irqsoff trace on return to user
  ARM: 6537/1: update Nomadik, U300 and Ux500 maintainers
  ARM: 6536/1: Add missing SZ_{32,64,128}
  ARM: fix cache-feroceon-l2 after stack based kmap_atomic()
  ARM: fix cache-xsc3l2 after stack based kmap_atomic()
  ARM: get rid of kmap_high_l1_vipt()
  ARM: smp: avoid incrementing mm_users on CPU startup
  ARM: pxa: PXA_ESERIES depends on FB_W100.

Addresses https://bugzilla.kernel.org/show_bug.cgi?id=25702Reported-by: NMartin Ettl <ettl.martin@gmx.de>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If security_filter_rule_init() doesn't return a rule, then not everything
is as fine as the return code implies.

This bug only occurs when the LSM (eg. SELinux) is disabled at runtime.

Adding an empty LSM rule causes ima_match_rules() to always succeed,
ignoring any remaining rules.

 default IMA TCB policy:
  # PROC_SUPER_MAGIC
  dont_measure fsmagic=0x9fa0
  # SYSFS_MAGIC
  dont_measure fsmagic=0x62656572
  # DEBUGFS_MAGIC
  dont_measure fsmagic=0x64626720
  # TMPFS_MAGIC
  dont_measure fsmagic=0x01021994
  # SECURITYFS_MAGIC
  dont_measure fsmagic=0x73636673

  < LSM specific rule >
  dont_measure obj_type=var_log_t

  measure func=BPRM_CHECK
  measure func=FILE_MMAP mask=MAY_EXEC
  measure func=FILE_CHECK mask=MAY_READ uid=0

Thus without the patch, with the boot parameters 'tcb selinux=0', adding
the above 'dont_measure obj_type=var_log_t' rule to the default IMA TCB
measurement policy, would result in nothing being measured.  The patch
prevents the default TCB policy from being replaced.
Signed-off-by: NMimi Zohar <zohar@us.ibm.com>
Cc: James Morris <jmorris@namei.org>
Acked-by: NSerge Hallyn <serge.hallyn@canonical.com>
Cc: David Safford <safford@watson.ibm.com>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf: Fix callchain hit bad cast on ascii display
  arch/x86/oprofile/op_model_amd.c: Perform initialisation on a single CPU
  watchdog: Improve initialisation error message and documentation

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6:
  [media] em28xx: radio_fops should also use unlocked_ioctl
  [media] wm8775: Revert changeset fcb97573 to avoid a regression
  [media] cx25840: Prevent device probe failure due to volume control ERANGE error

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx:
  dmaengine: provide dummy functions for DMA_ENGINE=n
  mv_xor: fix race in tasklet function

The function can't be __init itself (being called from some sysfs
handler), and hence none of the functions it calls can be either.
Signed-off-by: NJan Beulich <jbeulich@novell.com>
Acked-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Merge branch 'perf/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing into perf/urgent

Before this patch, the following error would sometimes occur after a
resume on pxa3xx:

    /path/to/mm/memory.c:144: bad pmd 8040542e.

The problem was that a temporary page table mapping was being improperly
restored.

The PXA3xx resume code creates a temporary mapping of resume_turn_on_mmu
to avoid a prefetch abort.  The pxa3xx_resume_after_mmu code requires
that the r1 register holding the address of this mapping not be
modified, however, resume_turn_on_mmu does modify it. It is mostly
correct in that r1 receives the base table address, but it may also
get other bits in 13:0.  This results in pxa3xx_resume_after_mmu
restoring the original mapping to the wrong place, corrupting memory
and leaving the temporary mapping in place.
Signed-off-by: NMatt Reimer <mreimer@sdgsystems.com>
Signed-off-by: NEric Miao <eric.y.miao@gmail.com>

The commit 6ac6b817 (ARM: pxa: encode
IRQ number into .nr_irqs) removed definition of ITE_LAST_IRQ which
caused the following build error:

CC      arch/arm/common/it8152.o
arch/arm/common/it8152.c: In function 'it8152_init_irq':
arch/arm/common/it8152.c:86: error: 'IT8152_LAST_IRQ' undeclared (first use in this function)
arch/arm/common/it8152.c:86: error: (Each undeclared identifier is reported only once
arch/arm/common/it8152.c:86: error: for each function it appears in.)
make[2]: *** [arch/arm/common/it8152.o] Error 1

Defining the IT8152_LAST_IRQ in the arch/arm/include/hardware/it8152.c
fixes the build.
Signed-off-by: NMike Rapoport <mike@compulab.co.il>
Signed-off-by: NEric Miao <eric.y.miao@gmail.com>

As arch/arm/mach-pxa/eseries.c references w100fb_gpio_{read,write}()
directly.
Signed-off-by: NLennert Buytenhek <buytenh@secretlab.ca>
Signed-off-by: NEric Miao <eric.y.miao@gmail.com>

ipchain__fprintf_graph() casts the number of hits in a branch as an
int, which means we lose its highests bits.

This results in meaningless number of callchain hits in perf.data
that have a high number of hits recorded, typically those that have
callchain branches hits appearing more than INT_MAX. This happens
easily as those are pondered by the event period.
Reported-by: NNick Piggin <npiggin@kernel.dk>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>

Disable preemption in init_ibs(). The function only checks the
ibs capabilities and sets up pci devices (if necessary). It runs
only on one cpu but operates with the local APIC and some MSRs,
thus it is better to disable preemption.

[    7.034377] BUG: using smp_processor_id() in preemptible [00000000] code: modprobe/483
[    7.034385] caller is setup_APIC_eilvt+0x155/0x180
[    7.034389] Pid: 483, comm: modprobe Not tainted 2.6.37-rc1-20101110+ #1
[    7.034392] Call Trace:
[    7.034400]  [<ffffffff812a2b72>] debug_smp_processor_id+0xd2/0xf0
[    7.034404]  [<ffffffff8101e985>] setup_APIC_eilvt+0x155/0x180
[ ... ]

Addresses https://bugzilla.kernel.org/show_bug.cgi?id=22812

Reported-by: <atswartz@gmail.com>
Signed-off-by: NRobert Richter <robert.richter@amd.com>
Cc: oprofile-list@lists.sourceforge.net <oprofile-list@lists.sourceforge.net>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Dan Carpenter <error27@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: <stable@kernel.org>         [2.6.37.x]
LKML-Reference: <20110103111514.GM4739@erda.amd.com>
[ small cleanups ]
Signed-off-by: NIngo Molnar <mingo@elte.hu>

em28xx uses core assisted locking, so it shouldn't use .ioctl.
The .ioctl callback was replaced by .unlocked_ioctl for video nodes,
but not for radio nodes. This is now corrected.
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

It seems that cx88 and ivtv use wm8775 on some different modes. The
patch that added support for a board with wm8775 broke ivtv boards with
this device. As we're too close to release 2.6.37, let's just revert
it.
Reported-by: NAndy Walls <awalls@md.metrocast.net>
Reported-by: NEric Sharkey <eric@lisaneric.org>
Reported-by: NAuric <auric@aanet.com.au>
Reported by: David Gesswein <djg@pdp8online.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This patch fixes a regression that crept into 2.6.36.

The volume control scale in the cx25840 driver has an unusual mapping
from register values to v4l2 volume control values.  Enforce the mapping
limits, so that the default volume control setting does not fall out of
bounds to prevent the cx25840 module device probe from failing.
Signed-off-by: NAndy Walls <awalls@md.metrocast.net>
Cc: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This lets drivers, optionally using the dmaengine, build with DMA_ENGINE
unselected.
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

use mv_xor_slot_cleanup() instead of __mv_xor_slot_cleanup() as the former function
aquires the spin lock that needed to protect the drivers data.

Cc: <stable@kernel.org>
Signed-off-by: NSaeed Bishara <saeed@marvell.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

This patch fixes below build error by adding the missing asm/memory.h,
which is needed for arch_is_coherent().

$ make pxa3xx_defconfig; make
  CC      init/do_mounts_rd.o
In file included from include/linux/list_bl.h:5,
                 from include/linux/rculist_bl.h:7,
                 from include/linux/dcache.h:7,
                 from include/linux/fs.h:381,
                 from init/do_mounts_rd.c:3:
include/linux/bit_spinlock.h: In function 'bit_spin_unlock':
include/linux/bit_spinlock.h:61: error: implicit declaration of function 'arch_is_coherent'
make[1]: *** [init/do_mounts_rd.o] Error 1
make: *** [init] Error 2
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Acked-by: NPeter Huewe <peterhuewe@gmx.de>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

The error message 'NMI watchdog failed to create perf event...'
does not make it clear that this is a fatal error for the
watchdog.  It also currently prints the error value as a
pointer, rather than extracting the error code with PTR_ERR().
Fix that.

Add a note to the description of the 'nowatchdog' kernel
parameter to associate it with this message.
Reported-by: NCesare Leonardi <celeonar@gmail.com>
Signed-off-by: NBen Hutchings <ben@decadent.org.uk>
Cc: 599368@bugs.debian.org
Cc: 608138@bugs.debian.org
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: <stable@kernel.org> # .37.x and later
LKML-Reference: <1294009362.3167.126.camel@localhost>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The owner field was removed from struct attribute in
6fd69dc5, so don't assign it anymore.
Signed-off-by: NMaurus Cuelenaere <mcuelenaere@gmail.com>
Signed-off-by: NGuenter Roeck <guenter.roeck@ericsson.com>

* 'kvm-updates/2.6.37' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: i8259: initialize isr_ack
  KVM: MMU: Fix incorrect direct gfn for unpaged mode shadow